Am Samstag, 30. Juli 2016, 11:34:59 CEST schrieb Jabiertxo Arraiza Cenoz:
Sorry the mail sended prematurely.
Hi Tobias thanks for your imput, my english is not so good, culd you fill the selected "table"?
Sure, no problem.
In every line group there are 3 line widths. The thick one is used for the general drawing, so it's not relevant for this extension. The thin lines are used for the dimension lines, extension lines and similar. The medium lines are only used for some symbols and for text. So in theory that would be of interest for the numbers printed, however, as we are most likely using regular text it can be ignored.
(Of course there are more cases where lines are drawn, but that's beyond the scope of the explanation).
That leaves us with only one line width per line group which is needed for the whole extension, namely the thin ones.
For line group 0.7 everything should be drawn with 0.35 mm wide lines, for line group 0.5 it is 0.25 mm.
In case anyone is curious, the thick lines are 0.7 mm and 0.5 mm. The medium ones are 0.5 mm and 0.35 mm. But as I said, none of those should be used for dimensionings according to DIN 15 / DIN ISO 128.
Some examples can be seen here:
http://www.maelabs.ucsd.edu/mae_guides/cad/dimensioning/ dimensioning_fundementals.htm
Line Group 0.7 "Maßshilfslinien" 0.35
Yes.
"Lines" 0.5
No, 0.35, too. At least for the dimensioning lines.
"Arrows" Extension are OK "Font" OSI Line Group 0.5 "Maßshilfslinien" ? "Lines" ?
0.25
"Arro ws" Extension are OK "Font" OSI
OSI font is a nice plus, I presonally use
https://github.com/hikikomori82/osifont
More Line Groups?
No, 0.7 and 0.5 is all that is needed.
Thanks in advance.
You are welcome. I am looking forward to the final LPE!
Tobias
[...]