Johan,
There must be some mistake. I just checked again. I do see libfreetype-6.dll. Do you not have that?
Thanks, Partha
On Tue, May 13, 2014 at 1:45 PM, Johan Engelen <jbc.engelen@...2592...>wrote:
On 13-5-2014 0:30, Partha Bagchi wrote:
some additional comments - you don't need intl.dll since I built gettext for you which provides you libintl-8.dll. I didn't compile openjpeg and so you don't have that DLL and freetype2 is included in the DLLs that I provided.
I can't find freetype*.dll in the opt64-sjlj.7z package. (I copied one from another package, but not sure about exception handling)
cheers, Johan
On Mon, May 12, 2014 at 6:28 PM, Partha Bagchi <partha1b@...400...> wrote:
Johan,
Great solution on the stringstream issue.
Did you not run into the return-type error?
You are indeed getting this error because you may be missing a dll that is then found within a 32-bit environment. Do you happen to have such a DLL?
I check my DLLs by doing something like: strings ./inkscape |grep -i dll and go from there or you can use depends ( http://www.dependencywalker.com/) which should tell you all the DLLs being called by your app.
One additional step you can take while building is to modify src/Makefile and use -mconsole instead of -mwindows. This will also provide you with feedback (like in a Linux shell) when you run inkscape from the command line.
Hope that helps.
Thanks, Partha
On Mon, May 12, 2014 at 5:09 PM, Johan Engelen < jbc.engelen@...2592...> wrote:
Well, I can get the thing to build now. (using x86_64-4.9.0-release-posix-sjlj-rt_v3-rev0) (cool thing is: that package includes clang!) Quite a few DLLs that we normally copy over to the inkscape dir are missing from the devlibs. Don't know if it matters or not: freetype6.dll, libopenjpeg-2.dll, intl.dll,
But upon start: "The application was unable to start correctly (0xc000007b). Click OK to close the application.
On internet I read: "there may be multiple reasons as to why you might receive 0xc00007b error when trying to run an application on a windows machine. 0xc000007b error usually comes from mixing up 32bit environment with 64bit one. For example 32bit application loads a 64bit dll causing 0xc000007b error."
So... that's where I am at.
regards, Johan
On 12-5-2014 3:20, Partha Bagchi wrote:
Hi Johan,
Here are the 2 additional libraries. Please let me know if they don't work for you.
URL: http://www.partha.com/temp/addnl-libs.7z
Thanks, Partha
On Sun, May 11, 2014 at 5:51 PM, Partha Bagchi <partha1b@...400...>wrote:
Hi Johan,
OK, I should be able to get you xslt and popt.
The other libs I have not built before (as I didn't need them). Let me take a crack it.
Thanks, Partha
On Sun, May 11, 2014 at 5:47 PM, Johan Engelen < jbc.engelen@...2592...> wrote:
Hi Partha, Some more details. The build still fails, and the devlibs related errors are only:
- missing libxslt
- missing popt.h
I have disabled ASPELL, LIBWPG, LIBWPG02, LIBVISIO, and LIBCDR. These are not necessary for running Inkscape, but will be needed when we want to switch to 64-bit / make these the 'official' devlibs64.
cheers, Johan
On 11-5-2014 23:03, Johan Engelen wrote:
Hi Partha, some modifications needed to build.xml, pkg-config files, etc. Some unimportant (for now) libs are missing but: libxslt.dll seems more important and is missing.
- Johan
On 11-5-2014 21:46, Johan Engelen wrote:
Woah.., going to test it now.
Thanks very much, Johan
On 11-5-2014 4:21, Partha Bagchi wrote:
Alright. :)
I have compiled most everything you need with the sjlj compiler and enabled c++11. All based on the latest available stable tarball. You are on your own to get gcc 4.8.1 sjlj. :)
Hope it's useful to you. Let me know if you have issues or need anything missing.
Please download it here: http://www.partha.com/temp/opt64-sjlj.7z
Thanks, Partha
On Tue, May 6, 2014 at 7:16 PM, Johan Engelen < jbc.engelen@...2592...> wrote:
Ah yes sorry, I meant /opt/bin /opt/lib... Thanks for correcting me :-)
SEH should be more efficient, but let's measure if it makes a difference ;-) But I am afraid I am giving you lots of headaches to recompile all deps? :S :S While you're at it, please enable C++11.
(being able to compile with clang would be a huge plus for me, but perhaps I am the only one. I don't know when SEH will be implemented for clang, a legal issue prevents it at the moment and I do not know when it clears up)
Much obliged, Johan
On 7-5-2014 0:09, Partha Bagchi wrote:
Thanks for doing that for me Johan!! :)
I know the main interest would be the /opt folder, but the whole thing is already setup and ready to go. :)
You will note (you can use pkg-config to verify) that I am using the latest stable release versions of gtk/glib and friends, so it's pretty "cutting" edge.
Are we sure we want to use sjlj on Windows? I mentioned here before that I was using SEH as I believe it's more efficient on Windows?
On Tue, May 6, 2014 at 4:35 PM, Johan Engelen < jbc.engelen@...2592...> wrote:
> Hi Partha, > Thank you very much. > The main folder of interest (for me anyway) are the MSYS /bin, /lib, > /include, ... etc folders. Getting mingw64 is easy, but getting all > Inkscape's dependencies isn't :) > The contents of those folders can be copied into our current devlibs > structure, and we'd be all set for devlibs64. > I see you are using mingw64 with SEH. This unfortunately prevents us > from using clang... I assume you built the deps yourself? Can you do it > again for sjlj? :P > > (what's nice is that you are using a recent version of gcc. Our > current dependency binaries are not compatible with gcc >4.6) > > cheers, > Johan > > > > On 6-5-2014 0:39, Partha Bagchi wrote: > > Sorry for the delay. > > I put together a 7z archive of what I hope would be all that's > needed to try and build Inkscape on a Window's 7 or greater 64-bit machine. > > You can download it here: http://www.partha.com/temp/Inkscape.7z > > Use 7z to unzip and please the included couple of "readmes". > > Please let me know if you have any issues or if I can help you set > it all up. > > Thanks, > Partha > > > > On Wed, Apr 30, 2014 at 2:54 AM, Johan Engelen < > jbc.engelen@...2592...> wrote: > >> Hi, >> sure, a 7z archive would be great too! >> >> Thanks, >> Johan >> >> >> >> ----- Reply message ----- >> From: "Partha Bagchi" <partha1b@...400...> >> To: "Johan Engelen" <jbc.engelen@...2592...> >> Subject: [Inkscape-devel] Inkscape 0.48.5 >> Date: Wed, Apr 30, 2014 02:29 >> >> >> Hi Johan, >> >> I got really frustrated since I don't know how the system works. >> >> Maybe I can provide a 7z/xz archive and people can download it? >> What do you think? >> >> I was really interested in getting the 64-bit build to the >> community as I did before, but I am stuck. :( >> >> Thanks, >> Partha >> >> >> >> On Tue, Apr 29, 2014 at 5:55 PM, Johan Engelen < >> jbc.engelen@...2592...> wrote: >> >>> Hi Partha, >>> Did you get around to uploading your environment? >>> >>> Cheers, >>> Johan >>> >>> >>> >>> On 13-4-2014 1:17, Partha Bagchi wrote: >>> >>> My launchpad id is partha1b. >>> >>> Thanks, >>> Partha >>> >>> >>> >>> On Sat, Apr 12, 2014 at 6:53 PM, Krzysztof Kosiński < >>> tweenk.pl@...400...> wrote: >>> >>>> 2014-04-13 0:40 GMT+02:00 Partha Bagchi <partha1b@...400...>: >>>> > That sounds great. I just hope that I can figure out how to use >>>> Ip. Anyway, >>>> > I will be happy to upload my environment. >>>> >>>> OK, in that case tell me your Launchpad account name. >>>> >>>> There are some instruction on the wiki on how to use Bazaar, but >>>> if >>>> you have problems feel free to ask. >>>> http://wiki.inkscape.org/wiki/index.php/Working_with_Bazaar >>>> >>>> Regards, Krzysztof >>>> >>> >>> >>> >>> ------------------------------------------------------------------------------ >>> Put Bad Developers to Shame >>> Dominate Development with Jenkins Continuous Integration >>> Continuously Automate Build, Test & Deployment >>> Start a new project now. Try Jenkins in the cloud.http://p.sf.net/sfu/13600_Cloudbees >>> >>> >>> >>> _______________________________________________ >>> Inkscape-devel mailing listInkscape-devel@...1901...://lists.sourceforge.net/lists/listinfo/inkscape-devel >>> >>> >>> >> > >
Is your legacy SCM system holding you back? Join Perforce May 7 to find out: • 3 signs your SCM is hindering your productivity • Requirements for releasing software faster • Expert tips and advice for migrating your SCM nowhttp://p.sf.net/sfu/perforce
Inkscape-devel mailing listInkscape-devel@...1901...://lists.sourceforge.net/lists/listinfo/inkscape-devel