2. Chill. √ Development focuses on wrapping up √ Disable features that aren't finished √ Identify 'make distcheck' issues √ Identify any critical OSX/Win32 packaging issues √ Identify remaining writing needed for Release Notes. √ Regressions Bug Hunt: 500 points -----> Update tutorials and other docs
The last item in the chill list is updating the tutorials that are shipped with the Inkscape package, including anything under the Help menu. The reason this task needs done in the Chill phase is to give translators plenty of time during Frost and Freeze.
External tutorials are also worth updating of course but aren't schedule-critical so not tracked here.
Ryan, your name was mentioned as someone with an eye on the tutorials, would you mind summarizing what work is already in process relating to tutorials for the Inkscape package?
Bryce
On Sat 26 Apr 2014 06:09:06 PM EDT, Bryce Harrington wrote:
- Chill. √ Development focuses on wrapping up √ Disable features that aren't finished √ Identify 'make distcheck' issues √ Identify any critical OSX/Win32 packaging issues √ Identify remaining writing needed for Release Notes. √ Regressions Bug Hunt: 500 points -----> Update tutorials and other docs
The last item in the chill list is updating the tutorials that are shipped with the Inkscape package, including anything under the Help menu. The reason this task needs done in the Chill phase is to give translators plenty of time during Frost and Freeze.
External tutorials are also worth updating of course but aren't schedule-critical so not tracked here.
Ryan, your name was mentioned as someone with an eye on the tutorials, would you mind summarizing what work is already in process relating to tutorials for the Inkscape package?
Bryce
AFAIK, there has not been much work actaully done on the official tutorials. Would the best plan of attack here be to review the 8 official tuts we have now, and just check that they are still "correct" (i.e. no regressions in the instructions due to changes between 0.48 and 0.91)?
or
Should we consider new content for these? (a lot harder, and higher impact for our localization team)
cheers, ryanlerch
Make sure it's still accurate... I want to add new content, but I think the release getting out sooner is more important. Less work for translation is the better choice for now.
Cheers, Josh On Apr 28, 2014 7:25 AM, "Ryan Lerch" <rlerch@...43...> wrote:
On Sat 26 Apr 2014 06:09:06 PM EDT, Bryce Harrington wrote:
- Chill. √ Development focuses on wrapping up √ Disable features that aren't finished √ Identify 'make distcheck' issues √ Identify any critical OSX/Win32 packaging issues √ Identify remaining writing needed for Release
Notes.
√ Regressions Bug Hunt: 500 points -----> Update tutorials and other docsThe last item in the chill list is updating the tutorials that are shipped with the Inkscape package, including anything under the Help menu. The reason this task needs done in the Chill phase is to give translators plenty of time during Frost and Freeze.
External tutorials are also worth updating of course but aren't schedule-critical so not tracked here.
Ryan, your name was mentioned as someone with an eye on the tutorials, would you mind summarizing what work is already in process relating to tutorials for the Inkscape package?
Bryce
AFAIK, there has not been much work actaully done on the official tutorials. Would the best plan of attack here be to review the 8 official tuts we have now, and just check that they are still "correct" (i.e. no regressions in the instructions due to changes between 0.48 and 0.91)?
or
Should we consider new content for these? (a lot harder, and higher impact for our localization team)
cheers, ryanlerch
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Exactly my thoughts as well.
Ryan, do you think you could do a quick review in the next day or two to see if you spot any major problem areas? If there's no major rework needed, perhaps we could call Chill done and move on to Frost.
On Mon, Apr 28, 2014 at 10:14:19AM -0700, Josh Andler wrote:
Make sure it's still accurate... I want to add new content, but I think the release getting out sooner is more important. Less work for translation is the better choice for now.
Cheers, Josh On Apr 28, 2014 7:25 AM, "Ryan Lerch" <rlerch@...43...> wrote:
On Sat 26 Apr 2014 06:09:06 PM EDT, Bryce Harrington wrote:
- Chill. √ Development focuses on wrapping up √ Disable features that aren't finished √ Identify 'make distcheck' issues √ Identify any critical OSX/Win32 packaging issues √ Identify remaining writing needed for Release
Notes.
√ Regressions Bug Hunt: 500 points -----> Update tutorials and other docsThe last item in the chill list is updating the tutorials that are shipped with the Inkscape package, including anything under the Help menu. The reason this task needs done in the Chill phase is to give translators plenty of time during Frost and Freeze.
External tutorials are also worth updating of course but aren't schedule-critical so not tracked here.
Ryan, your name was mentioned as someone with an eye on the tutorials, would you mind summarizing what work is already in process relating to tutorials for the Inkscape package?
Bryce
AFAIK, there has not been much work actaully done on the official tutorials. Would the best plan of attack here be to review the 8 official tuts we have now, and just check that they are still "correct" (i.e. no regressions in the instructions due to changes between 0.48 and 0.91)?
or
Should we consider new content for these? (a lot harder, and higher impact for our localization team)
cheers, ryanlerch
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Recently, a number of nice new LPEs were posted on the maillist. They look somewhat mature, shall we put them in trunk? This makes it easier to work on them, and may get some more testing done on them. LPEs are very easy to disable later-on down the road if needed, so little risk.
cheers, Johan
On 28-4-2014 20:14, Bryce Harrington wrote:
Exactly my thoughts as well.
Ryan, do you think you could do a quick review in the next day or two to see if you spot any major problem areas? If there's no major rework needed, perhaps we could call Chill done and move on to Frost.
On Mon, Apr 28, 2014 at 10:14:19AM -0700, Josh Andler wrote:
Make sure it's still accurate... I want to add new content, but I think the release getting out sooner is more important. Less work for translation is the better choice for now.
Cheers, Josh On Apr 28, 2014 7:25 AM, "Ryan Lerch" <rlerch@...43...> wrote:
On Sat 26 Apr 2014 06:09:06 PM EDT, Bryce Harrington wrote:
- Chill. √ Development focuses on wrapping up √ Disable features that aren't finished √ Identify 'make distcheck' issues √ Identify any critical OSX/Win32 packaging issues √ Identify remaining writing needed for Release
Notes.
√ Regressions Bug Hunt: 500 points -----> Update tutorials and other docsThe last item in the chill list is updating the tutorials that are shipped with the Inkscape package, including anything under the Help menu. The reason this task needs done in the Chill phase is to give translators plenty of time during Frost and Freeze.
External tutorials are also worth updating of course but aren't schedule-critical so not tracked here.
Ryan, your name was mentioned as someone with an eye on the tutorials, would you mind summarizing what work is already in process relating to tutorials for the Inkscape package?
Bryce
AFAIK, there has not been much work actaully done on the official tutorials. Would the best plan of attack here be to review the 8 official tuts we have now, and just check that they are still "correct" (i.e. no regressions in the instructions due to changes between 0.48 and 0.91)?
or
Should we consider new content for these? (a lot harder, and higher impact for our localization team)
cheers, ryanlerch
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
One of the first things we'll do when Frost starts is open up a new Experimental bzr branch. How about if we integrate these new LPEs there, to give them some extra baking time. Then ones that prove to be stable and production-ready after review, can be moved to trunk as appropriate.
Bryce
On Mon, Apr 28, 2014 at 08:23:07PM +0200, Johan Engelen wrote:
Recently, a number of nice new LPEs were posted on the maillist. They look somewhat mature, shall we put them in trunk? This makes it easier to work on them, and may get some more testing done on them. LPEs are very easy to disable later-on down the road if needed, so little risk.
cheers, Johan
On 28-4-2014 20:14, Bryce Harrington wrote:
Exactly my thoughts as well.
Ryan, do you think you could do a quick review in the next day or two to see if you spot any major problem areas? If there's no major rework needed, perhaps we could call Chill done and move on to Frost.
On Mon, Apr 28, 2014 at 10:14:19AM -0700, Josh Andler wrote:
Make sure it's still accurate... I want to add new content, but I think the release getting out sooner is more important. Less work for translation is the better choice for now.
Cheers, Josh On Apr 28, 2014 7:25 AM, "Ryan Lerch" <rlerch@...43...> wrote:
On Sat 26 Apr 2014 06:09:06 PM EDT, Bryce Harrington wrote:
- Chill. √ Development focuses on wrapping up √ Disable features that aren't finished √ Identify 'make distcheck' issues √ Identify any critical OSX/Win32 packaging issues √ Identify remaining writing needed for Release
Notes.
√ Regressions Bug Hunt: 500 points -----> Update tutorials and other docsThe last item in the chill list is updating the tutorials that are shipped with the Inkscape package, including anything under the Help menu. The reason this task needs done in the Chill phase is to give translators plenty of time during Frost and Freeze.
External tutorials are also worth updating of course but aren't schedule-critical so not tracked here.
Ryan, your name was mentioned as someone with an eye on the tutorials, would you mind summarizing what work is already in process relating to tutorials for the Inkscape package?
Bryce
AFAIK, there has not been much work actaully done on the official tutorials. Would the best plan of attack here be to review the 8 official tuts we have now, and just check that they are still "correct" (i.e. no regressions in the instructions due to changes between 0.48 and 0.91)?
or
Should we consider new content for these? (a lot harder, and higher impact for our localization team)
cheers, ryanlerch
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
k, easy enough. LPEs are very much contained and easily merged-in. - Johan
On 28-4-2014 23:42, Bryce Harrington wrote:
One of the first things we'll do when Frost starts is open up a new Experimental bzr branch. How about if we integrate these new LPEs there, to give them some extra baking time. Then ones that prove to be stable and production-ready after review, can be moved to trunk as appropriate.
Bryce
On Mon, Apr 28, 2014 at 08:23:07PM +0200, Johan Engelen wrote:
Recently, a number of nice new LPEs were posted on the maillist. They look somewhat mature, shall we put them in trunk? This makes it easier to work on them, and may get some more testing done on them. LPEs are very easy to disable later-on down the road if needed, so little risk.
cheers, Johan
On 28-4-2014 20:14, Bryce Harrington wrote:
Exactly my thoughts as well.
Ryan, do you think you could do a quick review in the next day or two to see if you spot any major problem areas? If there's no major rework needed, perhaps we could call Chill done and move on to Frost.
On Mon, Apr 28, 2014 at 10:14:19AM -0700, Josh Andler wrote:
Make sure it's still accurate... I want to add new content, but I think the release getting out sooner is more important. Less work for translation is the better choice for now.
Cheers, Josh On Apr 28, 2014 7:25 AM, "Ryan Lerch" <rlerch@...43...> wrote:
On Sat 26 Apr 2014 06:09:06 PM EDT, Bryce Harrington wrote:
- Chill. √ Development focuses on wrapping up √ Disable features that aren't finished √ Identify 'make distcheck' issues √ Identify any critical OSX/Win32 packaging issues √ Identify remaining writing needed for Release
Notes.
√ Regressions Bug Hunt: 500 points -----> Update tutorials and other docsThe last item in the chill list is updating the tutorials that are shipped with the Inkscape package, including anything under the Help menu. The reason this task needs done in the Chill phase is to give translators plenty of time during Frost and Freeze.
External tutorials are also worth updating of course but aren't schedule-critical so not tracked here.
Ryan, your name was mentioned as someone with an eye on the tutorials, would you mind summarizing what work is already in process relating to tutorials for the Inkscape package?
Bryce
AFAIK, there has not been much work actaully done on the official tutorials. Would the best plan of attack here be to review the 8 official tuts we have now, and just check that they are still "correct" (i.e. no regressions in the instructions due to changes between 0.48 and 0.91)?
or
Should we consider new content for these? (a lot harder, and higher impact for our localization team)
cheers, ryanlerch
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Hmm, what about translatable strings? - Johan
On 28-4-2014 23:42, Bryce Harrington wrote:
One of the first things we'll do when Frost starts is open up a new Experimental bzr branch. How about if we integrate these new LPEs there, to give them some extra baking time. Then ones that prove to be stable and production-ready after review, can be moved to trunk as appropriate.
Bryce
On Mon, Apr 28, 2014 at 08:23:07PM +0200, Johan Engelen wrote:
Recently, a number of nice new LPEs were posted on the maillist. They look somewhat mature, shall we put them in trunk? This makes it easier to work on them, and may get some more testing done on them. LPEs are very easy to disable later-on down the road if needed, so little risk.
cheers, Johan
On 28-4-2014 20:14, Bryce Harrington wrote:
Exactly my thoughts as well.
Ryan, do you think you could do a quick review in the next day or two to see if you spot any major problem areas? If there's no major rework needed, perhaps we could call Chill done and move on to Frost.
On Mon, Apr 28, 2014 at 10:14:19AM -0700, Josh Andler wrote:
Make sure it's still accurate... I want to add new content, but I think the release getting out sooner is more important. Less work for translation is the better choice for now.
Cheers, Josh On Apr 28, 2014 7:25 AM, "Ryan Lerch" <rlerch@...43...> wrote:
On Sat 26 Apr 2014 06:09:06 PM EDT, Bryce Harrington wrote:
- Chill. √ Development focuses on wrapping up √ Disable features that aren't finished √ Identify 'make distcheck' issues √ Identify any critical OSX/Win32 packaging issues √ Identify remaining writing needed for Release
Notes.
√ Regressions Bug Hunt: 500 points -----> Update tutorials and other docsThe last item in the chill list is updating the tutorials that are shipped with the Inkscape package, including anything under the Help menu. The reason this task needs done in the Chill phase is to give translators plenty of time during Frost and Freeze.
External tutorials are also worth updating of course but aren't schedule-critical so not tracked here.
Ryan, your name was mentioned as someone with an eye on the tutorials, would you mind summarizing what work is already in process relating to tutorials for the Inkscape package?
Bryce
AFAIK, there has not been much work actaully done on the official tutorials. Would the best plan of attack here be to review the 8 official tuts we have now, and just check that they are still "correct" (i.e. no regressions in the instructions due to changes between 0.48 and 0.91)?
or
Should we consider new content for these? (a lot harder, and higher impact for our localization team)
cheers, ryanlerch
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Hi,
Le Mardi 29 avril 2014 0h13, Johan Engelen <jbc.engelen@...2592...> a écrit :
Hmm, what about translatable strings?
As long as the strings are correctly marked as translatable in the code, they show in the po files, LPE activated or not. Thus merging the new LPEs in the trunk now will allow translators to work on them, and the associated strings will remain translated even if we disable the LPEs just before releasing (if one manually reactivates the LPEs, they will show translated).
As for the experimental branch, it's not the right place to translate new strings IMHO. The trunk and stable branch should be the only sources for translators.
Regards, -- Nicolas
On Tue 29 Apr 2014 03:20:41 AM EDT, Nicolas Dufour wrote:
Hi,
Le Mardi 29 avril 2014 0h13, Johan Engelen <jbc.engelen@...2592...> a écrit :
Hmm, what about translatable strings?
As long as the strings are correctly marked as translatable in the code, they show in the po files, LPE activated or not. Thus merging the new LPEs in the trunk now will allow translators to work on them, and the associated strings will remain translated even if we disable the LPEs just before releasing (if one manually reactivates the LPEs, they will show translated).
As for the experimental branch, it's not the right place to translate new strings IMHO. The trunk and stable branch should be the only sources for translators.
Regards,
Nicolas
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Just started a wikipage to try to track who is reviewing what, and to collate notes -- http://wiki.inkscape.org/wiki/index.php/0.91-tutorial-review
Also note that this bug also tracks some of the things for the 0.91 tutorials https://bugs.launchpad.net/inkscape/+bug/440194
cheers, ryanlerch
On Tue, Apr 29, 2014 at 12:12:58AM +0200, Johan Engelen wrote:
Hmm, what about translatable strings?
- Johan
That's a good question, but we still have time before string freeze.
Bryce
On 28-4-2014 23:42, Bryce Harrington wrote:
One of the first things we'll do when Frost starts is open up a new Experimental bzr branch. How about if we integrate these new LPEs there, to give them some extra baking time. Then ones that prove to be stable and production-ready after review, can be moved to trunk as appropriate.
Bryce
On Mon, Apr 28, 2014 at 08:23:07PM +0200, Johan Engelen wrote:
Recently, a number of nice new LPEs were posted on the maillist. They look somewhat mature, shall we put them in trunk? This makes it easier to work on them, and may get some more testing done on them. LPEs are very easy to disable later-on down the road if needed, so little risk.
cheers, Johan
On 28-4-2014 20:14, Bryce Harrington wrote:
Exactly my thoughts as well.
Ryan, do you think you could do a quick review in the next day or two to see if you spot any major problem areas? If there's no major rework needed, perhaps we could call Chill done and move on to Frost.
On Mon, Apr 28, 2014 at 10:14:19AM -0700, Josh Andler wrote:
Make sure it's still accurate... I want to add new content, but I think the release getting out sooner is more important. Less work for translation is the better choice for now.
Cheers, Josh On Apr 28, 2014 7:25 AM, "Ryan Lerch" <rlerch@...43...> wrote:
On Sat 26 Apr 2014 06:09:06 PM EDT, Bryce Harrington wrote: >2. Chill. √ Development focuses on wrapping up > √ Disable features that aren't finished > √ Identify 'make distcheck' issues > √ Identify any critical OSX/Win32 packaging issues > √ Identify remaining writing needed for Release Notes. > √ Regressions Bug Hunt: 500 points > -----> Update tutorials and other docs > >The last item in the chill list is updating the tutorials that are >shipped with the Inkscape package, including anything under the Help >menu. The reason this task needs done in the Chill phase is to give >translators plenty of time during Frost and Freeze. > >External tutorials are also worth updating of course but aren't >schedule-critical so not tracked here. > >Ryan, your name was mentioned as someone with an eye on the tutorials, >would you mind summarizing what work is already in process relating to >tutorials for the Inkscape package? > >Bryce > AFAIK, there has not been much work actaully done on the official tutorials. Would the best plan of attack here be to review the 8 official tuts we have now, and just check that they are still "correct" (i.e. no regressions in the instructions due to changes between 0.48 and 0.91)?
or
Should we consider new content for these? (a lot harder, and higher impact for our localization team)
cheers, ryanlerch
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
On 04/29/2014 01:52 PM, Ryan Lerch wrote:
On Tue 29 Apr 2014 03:20:41 AM EDT, Nicolas Dufour wrote:
Hi,
Le Mardi 29 avril 2014 0h13, Johan Engelen <jbc.engelen@...2592...> a écrit :
Hmm, what about translatable strings?
As long as the strings are correctly marked as translatable in the code, they show in the po files, LPE activated or not. Thus merging the new LPEs in the trunk now will allow translators to work on them, and the associated strings will remain translated even if we disable the LPEs just before releasing (if one manually reactivates the LPEs, they will show translated).
As for the experimental branch, it's not the right place to translate new strings IMHO. The trunk and stable branch should be the only sources for translators.
Regards,
Nicolas
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Just started a wikipage to try to track who is reviewing what, and to collate notes -- http://wiki.inkscape.org/wiki/index.php/0.91-tutorial-review
I have now taken the list of changes required, and broken them out into bugs in the bug tracker (one bug per tutorial)
#1315487 -- [0.91 Tutorial Review] issues with "tips and tricks" tutorial #1315485 -- [0.91 Tutorial Review] issues with "Elements of Design" tutorial #1315483 -- [0.91 Tutorial Review] issues with " Calligraphy" tutorial #1315480 -- [0.91 Tutorial Review] issues with " Bitmap tracing" tutorial #1315457 -- [0.91 Tutorial Review] issues with "Advanced" tutorial #1315453 -- [0.91 Tutorial Review] issues with "Shapes" tutorial #1315416 -- [0.91 Tutorial Review] issues with "Basic" tutorial
cheers, ryanlerch
On Fri, May 02, 2014 at 03:01:54PM -0400, Ryan Lerch wrote:
On 04/29/2014 01:52 PM, Ryan Lerch wrote:
On Tue 29 Apr 2014 03:20:41 AM EDT, Nicolas Dufour wrote:
Hi,
Le Mardi 29 avril 2014 0h13, Johan Engelen <jbc.engelen@...2592...> a écrit :
Hmm, what about translatable strings?
As long as the strings are correctly marked as translatable in the code, they show in the po files, LPE activated or not. Thus merging the new LPEs in the trunk now will allow translators to work on them, and the associated strings will remain translated even if we disable the LPEs just before releasing (if one manually reactivates the LPEs, they will show translated).
As for the experimental branch, it's not the right place to translate new strings IMHO. The trunk and stable branch should be the only sources for translators.
Regards,
Nicolas
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Just started a wikipage to try to track who is reviewing what, and to collate notes -- http://wiki.inkscape.org/wiki/index.php/0.91-tutorial-review
I have now taken the list of changes required, and broken them out into bugs in the bug tracker (one bug per tutorial)
#1315487 -- [0.91 Tutorial Review] issues with "tips and tricks" tutorial #1315485 -- [0.91 Tutorial Review] issues with "Elements of Design" tutorial #1315483 -- [0.91 Tutorial Review] issues with " Calligraphy" tutorial #1315480 -- [0.91 Tutorial Review] issues with " Bitmap tracing" tutorial #1315457 -- [0.91 Tutorial Review] issues with "Advanced" tutorial #1315453 -- [0.91 Tutorial Review] issues with "Shapes" tutorial #1315416 -- [0.91 Tutorial Review] issues with "Basic" tutorial
Thanks, once these are closed we'll move into Frost phase.
Bryce
On Sun 04 May 2014 08:24:48 PM EDT, Bryce Harrington wrote:
On Fri, May 02, 2014 at 03:01:54PM -0400, Ryan Lerch wrote:
On 04/29/2014 01:52 PM, Ryan Lerch wrote:
On Tue 29 Apr 2014 03:20:41 AM EDT, Nicolas Dufour wrote:
Hi,
Le Mardi 29 avril 2014 0h13, Johan Engelen <jbc.engelen@...2592...> a écrit :
Hmm, what about translatable strings?
As long as the strings are correctly marked as translatable in the code, they show in the po files, LPE activated or not. Thus merging the new LPEs in the trunk now will allow translators to work on them, and the associated strings will remain translated even if we disable the LPEs just before releasing (if one manually reactivates the LPEs, they will show translated).
As for the experimental branch, it's not the right place to translate new strings IMHO. The trunk and stable branch should be the only sources for translators.
Regards,
Nicolas
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Just started a wikipage to try to track who is reviewing what, and to collate notes -- http://wiki.inkscape.org/wiki/index.php/0.91-tutorial-review
I have now taken the list of changes required, and broken them out into bugs in the bug tracker (one bug per tutorial)
#1315487 -- [0.91 Tutorial Review] issues with "tips and tricks" tutorial #1315485 -- [0.91 Tutorial Review] issues with "Elements of Design" tutorial #1315483 -- [0.91 Tutorial Review] issues with " Calligraphy" tutorial #1315480 -- [0.91 Tutorial Review] issues with " Bitmap tracing" tutorial #1315457 -- [0.91 Tutorial Review] issues with "Advanced" tutorial #1315453 -- [0.91 Tutorial Review] issues with "Shapes" tutorial #1315416 -- [0.91 Tutorial Review] issues with "Basic" tutorial
Thanks, once these are closed we'll move into Frost phase.
Bryce
All of these are now closed, with the exception of the Advanced Tutorial [1], which has an Issue with the generated SVG. However, this issue shouldn't block the translators, so we should be good to mark this item as completed in the release checklist.
Special thanks to su_v for helping review and jazzynico for review & building all the docs.
cheers, ryanlerch
Hi,
Le Mardi 6 mai 2014 16h13, Ryan Lerch <rlerch@...43...> a écrit :
All of these are now closed, with the exception of the Advanced Tutorial [1], which has an Issue with the generated SVG.
The issue is now fixed and all the generated SVG tutorials are available in the trunk.
Cheers, -- Nicolas
On Tue, May 06, 2014 at 10:13:37AM -0400, Ryan Lerch wrote:
#1315487 -- [0.91 Tutorial Review] issues with "tips and tricks" tutorial #1315485 -- [0.91 Tutorial Review] issues with "Elements of Design" tutorial #1315483 -- [0.91 Tutorial Review] issues with " Calligraphy" tutorial #1315480 -- [0.91 Tutorial Review] issues with " Bitmap tracing" tutorial #1315457 -- [0.91 Tutorial Review] issues with "Advanced" tutorial #1315453 -- [0.91 Tutorial Review] issues with "Shapes" tutorial #1315416 -- [0.91 Tutorial Review] issues with "Basic" tutorial
Thanks, once these are closed we'll move into Frost phase.
Bryce
All of these are now closed, with the exception of the Advanced Tutorial [1], which has an Issue with the generated SVG. However, this issue shouldn't block the translators, so we should be good to mark this item as completed in the release checklist.
Special thanks to su_v for helping review and jazzynico for review & building all the docs.
Thanks, sounds like it's time for us to move to the next phase.
Bryce
participants (6)
-
Bryce Harrington -
Johan Engelen -
Josh Andler -
Martin Owens -
Nicolas Dufour -
Ryan Lerch