Build configuration for activation of path effect Fillet/Chamfer
Hi there,
I would like to compile Inkscape in a way so that I can use the Fillet/Chamfer path effect.
I got Inkscape compiled under a msys2 environment under windows 10 with the macro WITH_MODULES enabled, but I still cannot find the path effect in the list in the gui interface. As a codebase I use the source code from the gitlab repo and the branch 0.92.x.
Am I missing something? I furthermore have not found the given macro in the source code (only one #ifdef in inkview.cpp which seems somewhat related). I would expect some constructs like:
#ifdef WITH_MODULES /* some code */ #endif
Is this the correct macro to define for this use case? I am not totally sure that I did the build configuration correctly.
It seems that the macro definition is supposed to more or less add steps to the build configuration. Could you point me to the files where this is done.
Best regards, Johannes Madel
Hi Johannes,
as far as I know, that LPE was not fully functional in that branch and has been deactivated intentionally.
It is available and maintained in the master branch, and seems to work.
Maren
Am 13.01.19 um 07:36 schrieb Johannes Madel:
Hi there,
I would like to compile Inkscape in a way so that I can use the Fillet/Chamfer path effect.
I got Inkscape compiled under a msys2 environment under windows 10 with the macro WITH_MODULES enabled, but I still cannot find the path effect in the list in the gui interface. As a codebase I use the source code from the gitlab repo and the branch 0.92.x.
Am I missing something? I furthermore have not found the given macro in the source code (only one #ifdef in inkview.cpp which seems somewhat related). I would expect some constructs like:
#ifdef WITH_MODULES /* some code */ #endif
Is this the correct macro to define for this use case? I am not totally sure that I did the build configuration correctly.
It seems that the macro definition is supposed to more or less add steps to the build configuration. Could you point me to the files where this is done.
Best regards, Johannes Madel
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Hello Maren,
I digged into the source code in the meantime now and found the solution: It is the macro LEP_ENABLE_TEST_EFFECTS in the file src/life_effects/effect.cpp.
I had some issues with compiling the master branch, but I wil consider getting that handled.
Best regards, Johannes Madel
Am So., 13. Jan. 2019 um 17:33 Uhr schrieb Maren Hachmann <maren@...3165...>:
Hi Johannes,
as far as I know, that LPE was not fully functional in that branch and has been deactivated intentionally.
It is available and maintained in the master branch, and seems to work.
Maren
Am 13.01.19 um 07:36 schrieb Johannes Madel:
Hi there,
I would like to compile Inkscape in a way so that I can use the Fillet/Chamfer path effect.
I got Inkscape compiled under a msys2 environment under windows 10 with the macro WITH_MODULES enabled, but I still cannot find the path effect in the list in the gui interface. As a codebase I use the source code from the gitlab repo and the branch 0.92.x.
Am I missing something? I furthermore have not found the given macro in the source code (only one #ifdef in inkview.cpp which seems somewhat related). I would expect some constructs like:
#ifdef WITH_MODULES /* some code */ #endif
Is this the correct macro to define for this use case? I am not totally sure that I did the build configuration correctly.
It seems that the macro definition is supposed to more or less add steps to the build configuration. Could you point me to the files where this is done.
Best regards, Johannes Madel
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Hi Johannes.
Consider convert to paths your works after fillet-chamfer. Fillet Chamfer is not compatible with 1.0 and is removed for this.
Regards, Jabier.
-----Original Message----- From: Johannes Madel <johannes.madel@...400...> To: inkscape-devel@lists.sourceforge.net Subject: Re: [Inkscape-devel] Build configuration for activation of path effect Fillet/Chamfer Date: Mon, 14 Jan 2019 04:26:15 +0100
Hello Maren,
I digged into the source code in the meantime now and found the solution: It is the macro LEP_ENABLE_TEST_EFFECTS in the file src/life_effects/effect.cpp.
I had some issues with compiling the master branch, but I wil consider getting that handled.
Best regards, Johannes Madel
Am So., 13. Jan. 2019 um 17:33 Uhr schrieb Maren Hachmann <maren@...3165...>:
Hi Johannes,
as far as I know, that LPE was not fully functional in that branch and has been deactivated intentionally.
It is available and maintained in the master branch, and seems to work.
Maren
Am 13.01.19 um 07:36 schrieb Johannes Madel:
Hi there,
I would like to compile Inkscape in a way so that I can use the Fillet/Chamfer path effect.
I got Inkscape compiled under a msys2 environment under windows 10 with the macro WITH_MODULES enabled, but I still cannot find the path effect in the list in the gui interface. As a codebase I use the source code from the gitlab repo and the branch 0.92.x.
Am I missing something? I furthermore have not found the given macro in the source code (only one #ifdef in inkview.cpp which seems somewhat related). I would expect some constructs like:
#ifdef WITH_MODULES /* some code */ #endif
Is this the correct macro to define for this use case? I am not totally sure that I did the build configuration correctly.
It seems that the macro definition is supposed to more or less add steps to the build configuration. Could you point me to the files where this is done.
Best regards, Johannes Madel
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
_______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Am 14.01.19 um 09:27 schrieb Jabier Arraiza:
Hi Johannes.
Consider convert to paths your works after fillet-chamfer. Fillet Chamfer is not compatible with 1.0 and is removed for this.
- Looks like it has been replaced by something with the same name and functionality, though:
http://wiki.inkscape.org/wiki/index.php/Release_notes/1.0#Fillet.2FChamfer_L...
So, your old F+C paths don't work with that, but the functionality is there (If I understand this correctly).
Maren
Regards, Jabier.
-----Original Message----- From: Johannes Madel <johannes.madel@...400...> To: inkscape-devel@lists.sourceforge.net Subject: Re: [Inkscape-devel] Build configuration for activation of path effect Fillet/Chamfer Date: Mon, 14 Jan 2019 04:26:15 +0100
Hello Maren,
I digged into the source code in the meantime now and found the solution: It is the macro LEP_ENABLE_TEST_EFFECTS in the file src/life_effects/effect.cpp.
I had some issues with compiling the master branch, but I wil consider getting that handled.
Best regards, Johannes Madel
Am So., 13. Jan. 2019 um 17:33 Uhr schrieb Maren Hachmann <maren@...3165...>:
Hi Johannes,
as far as I know, that LPE was not fully functional in that branch and has been deactivated intentionally.
It is available and maintained in the master branch, and seems to work.
Maren
Am 13.01.19 um 07:36 schrieb Johannes Madel:
Hi there,
I would like to compile Inkscape in a way so that I can use the Fillet/Chamfer path effect.
I got Inkscape compiled under a msys2 environment under windows 10 with the macro WITH_MODULES enabled, but I still cannot find the path effect in the list in the gui interface. As a codebase I use the source code from the gitlab repo and the branch 0.92.x.
Am I missing something? I furthermore have not found the given macro in the source code (only one #ifdef in inkview.cpp which seems somewhat related). I would expect some constructs like:
#ifdef WITH_MODULES /* some code */ #endif
Is this the correct macro to define for this use case? I am not totally sure that I did the build configuration correctly.
It seems that the macro definition is supposed to more or less add steps to the build configuration. Could you point me to the files where this is done.
Best regards, Johannes Madel
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Shapes on 0.92 with fillet-chamfer not converted to paths open bad in 1.0
-----Original Message----- From: Maren Hachmann <maren@...3165...> To: inkscape-devel@lists.sourceforge.net Subject: Re: [Inkscape-devel] Build configuration for activation of path effect Fillet/Chamfer Date: Mon, 14 Jan 2019 13:21:12 +0100
Am 14.01.19 um 09:27 schrieb Jabier Arraiza:
Hi Johannes.
Consider convert to paths your works after fillet-chamfer. Fillet Chamfer is not compatible with 1.0 and is removed for this.
- Looks like it has been replaced by something with the same name and functionality, though:
http://wiki.inkscape.org/wiki/index.php/Release_notes/1.0#Fillet.2FChamfer_L...
So, your old F+C paths don't work with that, but the functionality is there (If I understand this correctly).
Maren
Regards, Jabier.
-----Original Message----- From: Johannes Madel <johannes.madel@...400...> To: inkscape-devel@lists.sourceforge.net Subject: Re: [Inkscape-devel] Build configuration for activation of path effect Fillet/Chamfer Date: Mon, 14 Jan 2019 04:26:15 +0100
Hello Maren,
I digged into the source code in the meantime now and found the solution: It is the macro LEP_ENABLE_TEST_EFFECTS in the file src/life_effects/effect.cpp.
I had some issues with compiling the master branch, but I wil consider getting that handled.
Best regards, Johannes Madel
Am So., 13. Jan. 2019 um 17:33 Uhr schrieb Maren Hachmann <maren@...3165...>:
Hi Johannes,
as far as I know, that LPE was not fully functional in that branch and has been deactivated intentionally.
It is available and maintained in the master branch, and seems to work.
Maren
Am 13.01.19 um 07:36 schrieb Johannes Madel:
Hi there,
I would like to compile Inkscape in a way so that I can use the Fillet/Chamfer path effect.
I got Inkscape compiled under a msys2 environment under windows 10 with the macro WITH_MODULES enabled, but I still cannot find the path effect in the list in the gui interface. As a codebase I use the source code from the gitlab repo and the branch 0.92.x.
Am I missing something? I furthermore have not found the given macro in the source code (only one #ifdef in inkview.cpp which seems somewhat related). I would expect some constructs like:
#ifdef WITH_MODULES /* some code */ #endif
Is this the correct macro to define for this use case? I am not totally sure that I did the build configuration correctly.
It seems that the macro definition is supposed to more or less add steps to the build configuration. Could you point me to the files where this is done.
Best regards, Johannes Madel
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
_______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
participants (3)
-
Jabier Arraiza -
Johannes Madel -
Maren Hachmann