Print output of hairlines or single pixel vector lines
![](https://secure.gravatar.com/avatar/4e059889e51e6b205bc30dcabcd0960e.jpg?s=120&d=mm&r=g)
18 May
2011
18 May
'11
2:47 p.m.
Have you developed capability to output hairline design for laser vector cutting and cutting wood on CNC wood routing machines?
There is a large user base waiting to hear from you.
Thanks.
--
ashmi
![](https://secure.gravatar.com/avatar/4e07c5146b7a5e3d90e4bac984f8ced3.jpg?s=120&d=mm&r=g)
18 May
18 May
11:21 p.m.
New subject: Print output of hairlines or single pixel vector lines
could you attach an example of the type of output file you would like to see?
- Alvin Penner
--
View this message in context: http://old.nabble.com/Print-output-of-hairlines-or-single-pixel-vector-lines...
Sent from the Inkscape - Dev mailing list archive at Nabble.com.
![](https://secure.gravatar.com/avatar/226589ab87042e4527fbdba56425676d.jpg?s=120&d=mm&r=g)
24 May
24 May
11:01 a.m.
New subject: Print output of hairlines or single pixel vector lines
Ponoko has adopted their own standard for this. E.g. width=0.1mm and colour=blue means cut all the way through. See Ponoko.com for their inkscape templates. Works really well...
On 5/19/2011 11:21 AM, Alvin Penner wrote:
could you attach an example of the type of output file you would like to see?
- Alvin Penner
4813
Age (days ago)
4819
Last active (days ago)
2 comments
3 participants
participants (3)
-
Alvin Penner
-
Ashmi Shah
-
Mark Schafer