So who wants some? Email me quantity and mailing address to get your mits on some for your Inkscape promoting needs.
Doc has the first 200, which leaves 800 up for grabs. Lemmeknow
-C
I'd like to take a stack to SCaLE https://www.socallinuxexpo.org/scale/16x. Can I get maybe 100?
How much were you ultimately out-of-pocket for these?
Ryan Gorley Founder + Creative Director
On 01/25/2018 06:40 AM, C R wrote:
So who wants some? Email me quantity and mailing address to get your mits on some for your Inkscape promoting needs.
Doc has the first 200, which leaves 800 up for grabs. Lemmeknow
-C
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Sure Ryan. :) Email me the address you'd like them sent too (offlist) and send them out next week when they come in.
The total was £106.74 including VAT. Bringing the per-sticker cost to a little over 10 pence each. If we decide we like these, larger quantities will drive that price per sticker down substantially, but 1000 was the minimum roll quantity for this company.
I'm compiling a list of printers and prices (and competence) to get the best quality/price. But in a world where sticker product photos are completely optional, and you have to ask 10 questions to ensure you get what you want, and have to explain that bleed is the area *outside* the sticker and that 3mm blade slippage, while okay for an A4 sheet, for a 40mm sticker is completely unacceptable:
https://www.dropbox.com/s/hn0a3kcedg8sgov/inkscape_silver_foil_sticker_40mm_...
It's a real uphill battle.
Fortunately, it's one I'm used to. :) -C
On 25 Jan 2018 6:32 pm, "Ryan Gorley" <ryan@...3592...> wrote:
I'd like to take a stack to SCaLE https://www.socallinuxexpo.org/scale/16x. Can I get maybe 100?
How much were you ultimately out-of-pocket for these?
Ryan Gorley Founder + Creative Director
On 01/25/2018 06:40 AM, C R wrote:
So who wants some? Email me quantity and mailing address to get your mits on some for your Inkscape promoting needs.
Doc has the first 200, which leaves 800 up for grabs. Lemmeknow
-C
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Inkscape-devel mailing listInkscape-devel@...1901...://lists.sourceforge.net/lists/listinfo/inkscape-devel
Cool work and congrats for the money back!
£106.74 is for 100 or 1000? just to be sure. I'm thinking getting some for the LGM I hope could go.
Regards.
On Fri, 2018-01-26 at 08:04 +0000, C R wrote:
Sure Ryan. :) Email me the address you'd like them sent too (offlist) and send them out next week when they come in.
The total was £106.74 including VAT. Bringing the per-sticker cost to a little over 10 pence each. If we decide we like these, larger quantities will drive that price per sticker down substantially, but 1000 was the minimum roll quantity for this company.
I'm compiling a list of printers and prices (and competence) to get the best quality/price. But in a world where sticker product photos are completely optional, and you have to ask 10 questions to ensure you get what you want, and have to explain that bleed is the area *outside* the sticker and that 3mm blade slippage, while okay for an A4 sheet, for a 40mm sticker is completely unacceptable:
https://www.dropbox.com/s/hn0a3kcedg8sgov/inkscape_silver_foil_sticke r_40mm_offset_problems.png?dl=1
It's a real uphill battle.
Fortunately, it's one I'm used to. :) -C
On 25 Jan 2018 6:32 pm, "Ryan Gorley" <ryan@...3592...> wrote:
I'd like to take a stack to SCaLE. Can I get maybe 100? How much were you ultimately out-of-pocket for these?
Ryan Gorley Founder + Creative Director
On 01/25/2018 06:40 AM, C R wrote:
So who wants some? Email me quantity and mailing address to get your mits on some for your Inkscape promoting needs.
Doc has the first 200, which leaves 800 up for grabs. Lemmeknow
-C
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
For 1000. I'd never pay a pound a piece for stickers to hand out. :)
Sure, how many you want?
On 26 Jan 2018 11:05 pm, "Jabier Arraiza" <jabier.arraiza@...2893...> wrote:
Cool work and congrats for the money back!
£106.74 is for 100 or 1000? just to be sure. I'm thinking getting some for the LGM I hope could go.
Regards.
On Fri, 2018-01-26 at 08:04 +0000, C R wrote:
Sure Ryan. :) Email me the address you'd like them sent too (offlist) and send them out next week when they come in.
The total was £106.74 including VAT. Bringing the per-sticker cost to a little over 10 pence each. If we decide we like these, larger quantities will drive that price per sticker down substantially, but 1000 was the minimum roll quantity for this company.
I'm compiling a list of printers and prices (and competence) to get the best quality/price. But in a world where sticker product photos are completely optional, and you have to ask 10 questions to ensure you get what you want, and have to explain that bleed is the area *outside* the sticker and that 3mm blade slippage, while okay for an A4 sheet, for a 40mm sticker is completely unacceptable:
https://www.dropbox.com/s/hn0a3kcedg8sgov/inkscape_silver_foil_sticke r_40mm_offset_problems.png?dl=1
It's a real uphill battle.
Fortunately, it's one I'm used to. :) -C
On 25 Jan 2018 6:32 pm, "Ryan Gorley" <ryan@...3592...> wrote:
I'd like to take a stack to SCaLE. Can I get maybe 100? How much were you ultimately out-of-pocket for these?
Ryan Gorley Founder + Creative Director
On 01/25/2018 06:40 AM, C R wrote:
So who wants some? Email me quantity and mailing address to get your mits on some for your Inkscape promoting needs.
Doc has the first 200, which leaves 800 up for grabs. Lemmeknow
-C
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Ufffff :) I think one hundred... regards!
On Sat, 2018-01-27 at 00:26 +0000, C R wrote:
For 1000. I'd never pay a pound a piece for stickers to hand out. :)
Sure, how many you want?
On 26 Jan 2018 11:05 pm, "Jabier Arraiza" <jabier.arraiza@...2893...> wrote:
Cool work and congrats for the money back!
£106.74 is for 100 or 1000? just to be sure. I'm thinking getting some for the LGM I hope could go.
Regards.
On Fri, 2018-01-26 at 08:04 +0000, C R wrote:
Sure Ryan. :) Email me the address you'd like them sent too (offlist) and send
them
out next week when they come in.
The total was £106.74 including VAT. Bringing the per-sticker cost to a little over 10 pence each. If
we
decide we like these, larger quantities will drive that price per sticker down substantially, but 1000 was the minimum roll
quantity
for this company.
I'm compiling a list of printers and prices (and competence) to
get
the best quality/price. But in a world where sticker product
photos
are completely optional, and you have to ask 10 questions to
ensure
you get what you want, and have to explain that bleed is the area *outside* the sticker and that 3mm blade slippage, while okay
for an
A4 sheet, for a 40mm sticker is completely unacceptable:
https://www.dropbox.com/s/hn0a3kcedg8sgov/inkscape_silver_foil_st
icke
r_40mm_offset_problems.png?dl=1
It's a real uphill battle.
Fortunately, it's one I'm used to. :) -C
On 25 Jan 2018 6:32 pm, "Ryan Gorley" <ryan@...3592...> wrote:
I'd like to take a stack to SCaLE. Can I get maybe 100? How much were you ultimately out-of-pocket for these?
Ryan Gorley Founder + Creative Director
On 01/25/2018 06:40 AM, C R wrote:
So who wants some? Email me quantity and mailing address to get your mits on
some
for your Inkscape promoting needs.
Doc has the first 200, which leaves 800 up for grabs. Lemmeknow
-C
Check out the vibrant tech community on one of the world's
most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Done! Just send address. -C
On 27 Jan 2018 6:55 pm, "Jabier Arraiza" <jabier.arraiza@...2893...> wrote:
Ufffff :) I think one hundred... regards!
On Sat, 2018-01-27 at 00:26 +0000, C R wrote:
For 1000. I'd never pay a pound a piece for stickers to hand out. :)
Sure, how many you want?
On 26 Jan 2018 11:05 pm, "Jabier Arraiza" <jabier.arraiza@...2893...> wrote:
Cool work and congrats for the money back!
£106.74 is for 100 or 1000? just to be sure. I'm thinking getting some for the LGM I hope could go.
Regards.
On Fri, 2018-01-26 at 08:04 +0000, C R wrote:
Sure Ryan. :) Email me the address you'd like them sent too (offlist) and send
them
out next week when they come in.
The total was £106.74 including VAT. Bringing the per-sticker cost to a little over 10 pence each. If
we
decide we like these, larger quantities will drive that price per sticker down substantially, but 1000 was the minimum roll
quantity
for this company.
I'm compiling a list of printers and prices (and competence) to
get
the best quality/price. But in a world where sticker product
photos
are completely optional, and you have to ask 10 questions to
ensure
you get what you want, and have to explain that bleed is the area *outside* the sticker and that 3mm blade slippage, while okay
for an
A4 sheet, for a 40mm sticker is completely unacceptable:
https://www.dropbox.com/s/hn0a3kcedg8sgov/inkscape_silver_foil_st
icke
r_40mm_offset_problems.png?dl=1
It's a real uphill battle.
Fortunately, it's one I'm used to. :) -C
On 25 Jan 2018 6:32 pm, "Ryan Gorley" <ryan@...3592...> wrote:
I'd like to take a stack to SCaLE. Can I get maybe 100? How much were you ultimately out-of-pocket for these?
Ryan Gorley Founder + Creative Director
On 01/25/2018 06:40 AM, C R wrote:
So who wants some? Email me quantity and mailing address to get your mits on
some
for your Inkscape promoting needs.
Doc has the first 200, which leaves 800 up for grabs. Lemmeknow
-C
Check out the vibrant tech community on one of the world's
most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
participants (3)
-
C R -
Jabier Arraiza -
Ryan Gorley