Hi,
I have a question:
How do I convert an Inkscape SVG file to PDF?
TIA,
Claus
You can import into Openoffice draw, then you can publish it as PDF
2005/5/9, Owen Cook <rcook@...580...>:
On Mon, 9 May 2005, Claus Cyrny wrote:
I have a question:
How do I convert an Inkscape SVG file to PDF?
Maybe Save as ps or svg. and then import the svg into Scribus. I don't think Inkscape has a direct route to PDF
Owen
This SF.Net email is sponsored by: NEC IT Guy Games. Get your fingers limbered up and give it your best shot. 4 great events, 4 opportunities to win big! Highest score wins.NEC IT Guy Games. Play to win an NEC 61 plasma display. Visit http://www.necitguy.com/?r=20 _______________________________________________ Inkscape-user mailing list Inkscape-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-user
I've had good luck using PDFcreator to convert all kinds of other documents to PDF. I haven't tried it specifically with Inkscape. It's a Windows-only application that masquerades as a printer.
Hi Claus,
If you are using Linux go Scribus.
I use Windows 2000 and have tried numerous PDF printer drivers. I have installed about six at one stage or another and the most useful I have found is PrimoPDF. It is free, instals as a printer driver and does not mess around with giving gratuitous messages or empty pages or any of these other cute devices to make you buy it. The results are better than several commercial PDF generators that I have tried (not Acrobat). PDFs generated with this driver do not have colour fringes. This is a problem with some other drivers, especially at high zoom levels, and the native resolution appears to be higher with Primo than with some others.
The increase in file size that happens is something that I find a bit of a hassle but I think that experience could reduce it but I never seem to have time to really track this down. It may be inherent in the PDF process or maybe Inkscape related....or both.
I would like PDF support it to be native to Inkscape. I think it is one area that would gain us a lot of kudos.
Erik
----- Original Message ----- From: "Claus Cyrny" <claus.cyrny@...22...> To: inkscape-user@lists.sourceforge.net Sent: Monday, May 09, 2005 6:33 PM Subject: [Inkscape-user] SVG to PDF?
Hi,
I have a question:
How do I convert an Inkscape SVG file to PDF?
TIA,
Claus
hi
i remember somebody was once asking for swf in/out.... is this interesting for inkscape? does it even make sense before we support animation?
anyway, do you guys now swifmill?
regards, bostjan
participants (6)
-
Boštjan Špetič
-
Claus Cyrny
-
Erik
-
George V. Reilly
-
Jair Andres Moreno
-
Owen Cook