I know I saw someone else post something about this. I cannot seem to print in landscape mode in Inkscape 0.46. I used a slackbuild from Slackbuilds.org on Slackware 12.1 (source compile). I tried the workaround posted on the site below, but lpr apparently expects a printer directly hooked to a parallel port and mine is a network printer.
https://bugs.launchpad.net/inkscape/+bug/219640
I also tried printing to a file and then to the printer (an HP LaserJet 6MP hooked to an HP JetDirect 300x Network printing interface), I still got portrait mode.
I suppose I can do everything in Landscape, then group the whole works and rotate it 90 degrees, but I am wondering if someone has found a workaround for this.
I am trying to print on anything but 8.5" x 11" in portrait mode. If I set the document to 11 x 17 " and tell the print driver the printer has 11 x 17" paper it prints a cropped 8.5" x 11" like Inkscape just won't believe that the paper it has to print on is as big as I tell it it is. It is even cropped in print preview. Too bad cause looks like a great program but if it won't print?
-----Original Message----- From: inkscape-user-bounces@lists.sourceforge.net [mailto:inkscape-user-bounces@lists.sourceforge.net] On Behalf Of Elwin Estle Sent: Tuesday, September 02, 2008 5:59 PM To: inkscape-user@lists.sourceforge.net Subject: [Inkscape-user] landscape printing?
I know I saw someone else post something about this. I cannot seem to print in landscape mode in Inkscape 0.46. I used a slackbuild from Slackbuilds.org on Slackware 12.1 (source compile). I tried the workaround posted on the site below, but lpr apparently expects a printer directly hooked to a parallel port and mine is a network printer.
https://bugs.launchpad.net/inkscape/+bug/219640
I also tried printing to a file and then to the printer (an HP LaserJet 6MP hooked to an HP JetDirect 300x Network printing interface), I still got portrait mode.
I suppose I can do everything in Landscape, then group the whole works and rotate it 90 degrees, but I am wondering if someone has found a workaround for this.
------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Inkscape-user mailing list Inkscape-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-user
Elwin Estle wrote:
I cannot seem to print in landscape mode in Inkscape 0.46.
is this the official release from April 1? I just tried this on Win32 Inkscape19792-080902.7z and it appears to be rotating by 90 degrees as it should, although I cannot speak to the placement or sizing, since all I have is just an 8.5x11 printer.
On Tue, 2 Sep 2008 17:58:35 -0700 (PDT) Elwin Estle <chrysalis_reborn@...12...> wrote:
I know I saw someone else post something about this. I cannot seem to print in landscape mode in Inkscape 0.46. I used a slackbuild from Slackbuilds.org on Slackware 12.1 (source compile). I tried the workaround posted on the site below, but lpr apparently expects a printer directly hooked to a parallel port and mine is a network printer.
https://bugs.launchpad.net/inkscape/+bug/219640
I also tried printing to a file and then to the printer (an HP LaserJet 6MP hooked to an HP JetDirect 300x Network printing interface), I still got portrait mode.
I suppose I can do everything in Landscape, then group the whole works and rotate it 90 degrees, but I am wondering if someone has found a workaround for this.
The workaround I'm using is to export to pdf, then print the pdf in evince.
I assume so. it is on Linux and the slackbuild site takes you do a sourceforge link to download the source code for compiling, which I am guessing is the same location you are directed to for downloading source from the inkscape.org site.
In addition, everything I print also prints an extra blank page. Not sure why that might be.
Perhaps I shall have to revert to 0.45...sigh...
--- On Tue, 9/2/08, Alvin Penner <penner@...2467...> wrote:
From: Alvin Penner <penner@...2467...> Subject: Re: [Inkscape-user] landscape printing? To: inkscape-user@lists.sourceforge.net Date: Tuesday, September 2, 2008, 10:16 PM Elwin Estle wrote:
I cannot seem to print in landscape mode in Inkscape
0.46.
is this the official release from April 1? I just tried this on Win32 Inkscape19792-080902.7z and it appears to be rotating by 90 degrees as it should, although I cannot speak to the placement or sizing, since all I have is just an 8.5x11 printer. -- View this message in context: http://www.nabble.com/landscape-printing--tp19281242p19281796.html Sent from the Inkscape - User mailing list archive at Nabble.com.
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Inkscape-user mailing list Inkscape-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-user
participants (4)
-
Abrolag -
Alvin Penner -
Elwin Estle -
Howard Goff