2020-06-07 12-56-54 PDT Martin Owens I think 2020-06-04 10-09-35 PDT Martin Owens I mean share code as much as possible by importing from a central module if you must. But yes, split it out into 5 extensions. 2020-01-17 19-57-06 PST Martin Owens simplstyle doesn't exist any more, it's gone. 2020-09-02 06-46-53 PDT Martin Owens I see. It's not quite ready for testing with the creator. Can I get in touch with you next week? 2020-06-03 16-58-22 PDT Martin Owens Run python-black over the code, it'll auto-format it all in one go. 2020-06-08 07-57-22 PDT Martin Owens Can you point me at the code again and I will show you the fix. 2020-06-07 14-07-17 PDT Martin Owens In master you can just construct a list of items and get the bounding box. But here you'll have to do it manually. 2020-06-04 02-56-33 PDT Martin Owens Using python-gobject Gtk / glade. It's a whole process. 2020-06-07 05-45-13 PDT Martin Owens But there was a recent change because the bounding_box is not transformed. 2020-06-07 14-06-33 PDT Martin Owens You need the elem 2020-06-07 12-57-06 PDT Martin Owens The api in master has moved on a bit. 2020-06-04 06-12-38 PDT Martin Owens Yes split into 5, you will have much fewer headaches. 2020-06-08 07-57-08 PDT Martin Owens Yes, confirmed, this is the transformation on the parent group. 2020-06-04 04-44-48 PDT Martin Owens Especially if you split out the sections into their own extensions. So --panel_screw_stroke_width would just be "screw_stroke_width" in the panel extension. 2020-06-07 05-45-36 PDT Martin Owens (it is now) so for your code, you should make sure you get the transformed bounding box. 2020-06-04 02-45-13 PDT Martin Owens So where is says "vintage circle" this is really just a star right? 2020-06-04 10-46-54 PDT Martin Owens That's completely understandable. This is a separate extension so my review is only recommendation. 2020-06-08 10-12-06 PDT Martin Owens Oh right, yeah knob is now just an element, either take it as a list or take it as an element. Up to your workflow 2020-06-03 17-01-14 PDT Martin Owens I think it might be hard to split up your functions, all your code is in one method which will make it hard to maintain (or share duplicate code). 2020-06-07 19-21-52 PDT Martin Owens Sorry for the terse explainations. 2020-06-04 02-42-37 PDT Martin Owens Unless arg1 and arg2 are sodipodi attributes and I don't understand them. 2020-06-04 02-44-26 PDT Martin Owens Amplified? 2020-06-03 17-10-58 PDT Martin Owens I don't think sodipodi:arg1 and sodipodi:arg2 are real arc arguments are they? 2020-06-08 07-55-13 PDT Martin Owens ok 2020-06-03 17-03-11 PDT Martin Owens Is this five extensions rolled into one? i.e. could these be split into 5 python files each drawing a different **part**? 2020-01-17 19-59-53 PST Martin Owens Best to keep this in the extensions channel though so other people can jump in or learn from it 2020-06-04 04-44-02 PDT Martin Owens But of course reducing it's size is possible too. 2020-06-07 19-22-49 PDT Martin Owens Off the top of my head you may want this: `bbox = sum([elem.bounding_box() * elem.composed_transform() for elem in generator])` 2020-06-08 07-15-22 PDT Martin Owens I don't know why knob would be from selected, I presume this means you intend users to select knobs. 2020-01-17 19-59-31 PST Martin Owens Once you have svg in inkscape, use the xml editor to figure out what you have. Which elements have arrived and which ones haven't 2020-06-03 17-22-08 PDT Martin Owens Have a good night! 2020-06-07 05-37-00 PDT Martin Owens It sounds like you need to deal with the transformation. 2020-06-04 10-17-19 PDT Martin Owens https://gitlab.com/inkscape/extension-manager 2020-06-03 17-06-38 PDT Martin Owens This is the dictionary pattern, it can turn this:
``` if self.options.moog_panel_units == 1: #single moog_units = 53.721 elif self.options.moog_panel_units == 2: #double moog_units = 107.696 elif self.options.moog_panel_units == 4: #quad moog_units = 215.646 elif self.options.moog_panel_units == 8: #octal moog_units = 431.546 ```
into this:
```moog_units = {1: 53.721, 2: 107.696, 4: 215.646, 8: 431.546}[self.options.moog_panel_units]```
2020-09-02 06-05-08 PDT Martin Owens freesvg extension? 2020-06-04 02-42-14 PDT Martin Owens No, for the attributes which are sodipodi attributes, those are right (although you don't have to use them as you can just say PathElement.arc(...) as documented yesterday) 2020-06-04 02-44-38 PDT Martin Owens Yes 2020-06-08 07-15-48 PDT Martin Owens And if that's the case, yes, knob = self.svg.get_selected() is wrong, as it returns a LIST of items, not a single item. 2020-09-02 06-08-16 PDT Martin Owens If not, can you link me, I'm still confused 2020-06-08 11-12-20 PDT Martin Owens Just say `if isinstance(knob, inkex.Group): for child in knob.decendants(): if child.**is color object test**: knob = child` 2020-06-03 16-56-05 PDT Martin Owens etree isn't being used you can remove that import 2020-06-04 04-43-27 PDT Martin Owens Black is like any automatic tool, you have to make a decision on it's output. 2020-06-08 07-14-58 PDT Martin Owens You have to get a list of all the elements that make up the knob. If that's just one group, or if that's a set of items. 2020-06-08 11-11-11 PDT Martin Owens You could get around that. 2020-06-07 05-47-07 PDT Martin Owens I don't understand. 2020-07-08 13-42-42 PDT Martin Owens No, likely they are using the appimage or snap. There's reports of very odd python issues with those. 2020-01-17 19-57-42 PST Martin Owens draw_oval_hole is drawing a rectangle 2020-06-04 10-47-13 PDT Martin Owens It would only be a requirement if you wanted to get your extension into the core repository (i.e. shipped with Inkscape) 2020-06-08 10-18-15 PDT Martin Owens Just turn it into a list, knob = [knob] if that's the only issue. 2020-06-03 16-57-47 PDT Martin Owens You don't have to do the argparse stuff, it's done for you. 2020-06-03 16-44-42 PDT Martin Owens I think it's private, I get 404 2020-06-04 02-45-44 PDT Martin Owens Then I understand, I was reading 'arc' by mistake. 2020-06-08 09-44-08 PDT Martin Owens Oh, `from inkex.elements import ShapeElement` 2020-06-03 17-09-13 PDT Martin Owens `draw_circle_mark` can use `PathElement.arc((cx, cy), r)` instead of manually making arcs 2020-06-04 10-21-19 PDT Martin Owens Yes, The gtk stuff is highly experimental. Others have used Tk 2020-06-08 07-09-41 PDT Martin Owens It's an xml element. 2020-06-08 10-18-36 PDT Martin Owens But decide now if users should be selecting multiple knobs or not. 2020-06-07 01-37-16 PDT Martin Owens Is it the above issue? 2020-02-04 15-22-04 PST Martin Owens I can't right now, I've got a backlog of things. But you should post it to the forums and see if you can get other people to test it, it seems like a really cool extension. 2020-06-03 17-22-03 PDT Martin Owens Ah I haven't got onto the ui yet, sorry. 2020-06-08 08-13-32 PDT Martin Owens This is untested: https://gitlab.com/Faselunare/synth-panels-designer/-/merge_requests/2 2020-09-02 06-08-05 PDT Martin Owens Hang on, your extension is called freesvg? 2020-06-04 04-43-51 PDT Martin Owens It's fine as it is. 2020-06-07 05-36-45 PDT Martin Owens :thumbsup: 2020-06-03 17-17-12 PDT Martin Owens If you have your own data, you should use a different namespace. 2020-06-03 16-49-17 PDT Martin Owens No code. Am I a guest level? 2020-06-07 05-44-45 PDT Martin Owens Should be possible with bounding_Box().center 2020-06-04 10-17-12 PDT Martin Owens Yes, you can have a look at the extension manager: 2020-06-08 07-09-45 PDT Martin Owens From the svg file. 2020-06-04 10-19-21 PDT Martin Owens No, it's planned for 1.1 2020-06-03 16-58-08 PDT Martin Owens No I think the python is actually quite good. 2020-06-03 16-57-02 PDT Martin Owens The code looks healthy. Although pylint gives a score of -1.64 out of 10. Most of that is just formatting issues. But makes it hard to see real problems (like not having underscore imported from inkex.localisation) 2020-06-08 09-49-52 PDT Martin Owens :thumbsup: 2020-06-03 17-10-09 PDT Martin Owens for `draw_knob_scale_arc_complex` do `PathElement.arc((cx, cy), r, start=start, end=end, open=True)` 2020-06-03 17-18-25 PDT Martin Owens For example you can do `synth:vintage_x` instead of `sodipodi:arg1` 2020-06-03 16-47-30 PDT Martin Owens doctormo < github 2020-06-03 16-47-38 PDT Martin Owens doctormo@gmail.com 2020-09-02 06-04-44 PDT Martin Owens Morning! 2020-06-04 06-12-45 PDT Martin Owens Tk is fine. 2020-06-07 12-56-48 PDT Martin Owens From an element, ask for elem.bounding_box(transform=True) 2020-06-03 16-49-47 PDT Martin Owens devel, I won't edit anything 2020-07-08 13-42-49 PDT Martin Owens Inkex is here to stay 2020-06-10 13-19-48 PDT Martin Owens Sounds good! 2020-06-04 16-32-38 PDT urbanspaceman illustrator.png (https://chat.inkscape.org/file-upload/HRcpkcSWbiQLEDjyG/illustrator.png) 2020-06-06 13-35-19 PDT urbanspaceman i need to create the scales around the selected knob (we had already talked about it) it's just a limitation that could be mistaken for a bug and cause me a lot of headaches with users 2020-06-04 16-26-18 PDT urbanspaceman spd_test2.dxf (https://chat.inkscape.org/file-upload/FE3rsqAPBNFpfpFqY/spd_test2.dxf) 2020-06-08 09-49-16 PDT urbanspaceman ok, no error now but i have to change some logic i think
```To draw a scale, you must first select the corresponding knob. Please select the knob's main color. ``` 2020-06-08 01-45-55 PDT urbanspaceman Knob? 2020-01-22 06-04-34 PST urbanspaceman old code (another old extension use this code ``` def draw_knob_arc(self, x, y, angle, offset):
start_point_angle = (angle - pi)/2.0 end_point_angle = pi - start_point_angle
style = { 'stroke' : '#000000', 'stroke-width' : str(self.options.linewidth), 'fill' : 'none' } ell_attribs = {'style':simplestyle.formatStyle(style), inkex.addNS('cx','sodipodi') :str(self.x_offset), inkex.addNS('cy','sodipodi') :str(self.y_offset), inkex.addNS('rx','sodipodi') :str(offset), inkex.addNS('ry','sodipodi') :str(offset), inkex.addNS('start','sodipodi') :str(end_point_angle), inkex.addNS('end','sodipodi') :str(start_point_angle), inkex.addNS('open','sodipodi') :'true', #all ellipse sectors we will draw are open inkex.addNS('type','sodipodi') :'arc', 'transform' :transform
} ell = inkex.etree.SubElement(parent, inkex.addNS('path','svg'), ell_attribs ) ``` but i see in these days that there is less coe to write now 2020-02-04 15-16-53 PST urbanspaceman hi @doctormo do you want to test my extension? 2020-06-04 10-11-02 PDT urbanspaceman :-O I should rethink everything ... question: do you have an extension to recommend that is made with gtk? I want to see the code 2020-06-03 17-03-46 PDT urbanspaceman yes, is possible panels, knobs, knob scales, sliders, slider scales 2020-01-17 15-18-03 PST urbanspaceman hi! on m linux computer it works on mac doesn't works i made some mode... and now i have only one things that works
- layer are created - def draw_hole(self, w, h, x, y): works but hole are visible only if i'm in lasercut - panel is not rendered at all - oval hole not rendered - hole center not rendered (i used line) 2020-06-04 02-32-26 PDT urbanspaceman try this ``` def draw_vintage_circle(self, x, y, radius, radius2, sides): circ = inkex.PathElement() circ.set('spd:type', 'star') circ.set('spd:cx', x) circ.set('spd:cy', y) circ.set('spd:arg1', 0.85) circ.set('spd:arg2', 1.3) circ.set('spd:rounded', 0.5) circ.set('spd:sides', sides) circ.set('spd:r1', radius) circ.set('spd:r2', radius2) return circ ``` but it doesn't works, i used spd instead of sodipodi 2020-06-08 07-16-32 PDT urbanspaceman but i select only one element, the 'main color' that is a circle 2020-06-08 09-55-05 PDT urbanspaceman ``` is_knob_selected = False
if bbox is not None: for node in knob: is_knob_selected = True ``` 2020-06-04 16-32-44 PDT urbanspaceman inkscape.png (https://chat.inkscape.org/file-upload/wp324seaJ5ZmxfQW5/inkscape.png) 2020-01-17 20-01-12 PST urbanspaceman ok, I've done it! Now I'm working on the layout of the panel, tomorrow I'll implement the functions thanks a lot! 2020-06-04 06-13-20 PDT urbanspaceman i always have one UI also with 5 separate py files? 2020-06-07 14-08-12 PDT urbanspaceman what do you mean by master? and how do I do it manually? 2020-06-08 10-16-31 PDT urbanspaceman with your code I use it as an element but I can't use it as a list so I have to review everything ... or can I recover the existing code? 2020-06-08 07-41-19 PDT urbanspaceman please look at the video 2020-06-03 16-57-59 PDT urbanspaceman my python skills are not very good 2020-06-08 07-17-18 PDT urbanspaceman yes the workflow is 1) create the knob (or many knobs) 2) select the desired knob and create the scale 2020-06-07 05-18-49 PDT urbanspaceman If you move the knob and then generate the scales, the two are not aligned 2020-05-16 13-23-05 PDT urbanspaceman hi! maybe is little error in my code but i get strange behavior 2020-06-04 10-25-39 PDT urbanspaceman I did a grep in the extensions repo but I didn't find Tk 2020-06-04 02-43-11 PDT urbanspaceman ahhh ok 2020-06-08 10-19-32 PDT urbanspaceman (a bit complicated for a normal user) 2020-06-04 02-44-20 PDT urbanspaceman do you think this can be amplified? 2020-06-08 08-04-14 PDT urbanspaceman the same 1220/1221 for the slider's scale 2020-06-10 12-40-09 PDT urbanspaceman I have 3 beta tester now 2020-06-08 09-55-02 PDT urbanspaceman this part 2020-06-04 06-13-34 PDT urbanspaceman or you mean 5 separated UI 2020-01-22 06-06-10 PST urbanspaceman ``` def draw_knob_arc(self, x, y, angle, offset): ``` 2020-06-04 02-54-04 PDT urbanspaceman please remind me what is the other way of writing extensions for inkscape to get custom UI I'd like to take a look at it as soon as I have time 2020-06-04 04-45-46 PDT urbanspaceman you mean split the main file in 5 files? 2020-06-04 10-25-00 PDT urbanspaceman maybe I should leave my extension as it is now, otherwise it will take me another 1000 years to get it out. When it becomes clearer how to develop in gtk I could do it again. 2020-06-07 05-44-27 PDT urbanspaceman But if I select the knob (the main part) why I can't get is center? 2020-06-03 17-15-11 PDT urbanspaceman Schermata 2020-06-04 alle 02.14.47.png (https://chat.inkscape.org/file-upload/9DwEc4iSCXKDJDLTT/Schermata%202020-06-...) 2020-07-08 14-36-20 PDT urbanspaceman i can ask 2020-06-04 16-26-20 PDT urbanspaceman spd_test.svg (https://chat.inkscape.org/file-upload/obYh7uD2ddzTqxRLH/spd_test.svg) 2020-06-08 01-45-46 PDT urbanspaceman But elem what is? 2020-05-16 14-14-00 PDT urbanspaceman but written english is not a problem 2020-06-04 05-44-28 PDT urbanspaceman tkinter is fine for the UI? 2020-06-03 17-01-03 PDT urbanspaceman i have to install black... i think 2020-06-04 10-19-08 PDT urbanspaceman this extension is already present in inkscape 1? 2020-06-03 17-21-13 PDT urbanspaceman many things to do (and I was unable to install black), I have to go to sleep ... it's very late. tomorrow I will read everything you write to me and I will start fixing the code.
have you tried using the extension? do you think there is a clearer way to manage the UI or is it ok? 2020-06-04 02-45-42 PDT urbanspaceman is this 2020-06-03 16-54-26 PDT urbanspaceman ciao 2020-06-03 16-49-27 PDT urbanspaceman yes 2020-06-03 16-50-10 PDT urbanspaceman ok try 2020-06-03 17-22-36 PDT urbanspaceman see you tomorrow :-) ciao e grazie! 2020-06-07 05-19-33 PDT urbanspaceman https://www.synthanatomy.com/2020/06/with-this-free-inkscape-extension-you-b... 2020-06-03 17-18-43 PDT urbanspaceman i understand 2020-06-04 02-45-28 PDT urbanspaceman vintage 2020-06-08 10-19-20 PDT urbanspaceman no, user select only one knob at time and (now) has to select exactly the 'main color' element 2020-01-17 15-18-11 PST urbanspaceman https://pad.riseup.net/p/inkscape-extensions-keep 2020-06-09 15-35-28 PDT urbanspaceman update this bbox_panel = self.svg.get_page_bbox() gives me exactly the center of the page (that is what i want)
but the knob is not at this coordinates but on top of the first knob 2020-06-07 14-09-02 PDT urbanspaceman I'm sorry to waste you time but I want to understand in order to finish the extension 2020-02-04 15-24-46 PST urbanspaceman Schermata 2020-02-05 alle 00.23.51.png (https://chat.inkscape.org/file-upload/g2eAXWXvfkmbPnHdb/Schermata%202020-02-...) 2020-06-09 02-07-47 PDT urbanspaceman doc, it starts working, now I have the problem that the first knob is draw in the center of the page (and it''s ok) while the second one is draw to the same coordinates as the first and not in the center of the page (i moved the first)
``` bbox_panel = self.svg.get_page_bbox()
if self.options.knob_main_style == 2: vintage_knob = self.draw_vintage_circle(x=str(bbox_panel.center_x), y=str(bbox_panel.center_y), radius=str(self.options.knob_vintage_dimension / 2), radius2 = str(self.options.knob_vintage_dimension / 2 + 1 ), sides = 7) mainknob = Circle(cx=str(bbox_panel.center_x), cy=str(bbox_panel.center_y), r=str(self.options.knob_main_dimension / 2)) ``` 2020-07-12 16-19-23 PDT urbanspaceman I understand that if the UI is not defined in the inx file, the default values are taken from the py file I also figured out how to create a small interface with tkiner (2 sliders) what I didn't understand though, is how to pass the values in realtime to the function it draws
``` import sys
import inkex import argparse import math import os from inkex.elements import ShapeElement
from lxml import etree from inkex.elements import Circle, PathElement, Rectangle, load_svg, Group, TextElement from math import *
from tkinter import *
master = Tk() options = argparse.ArgumentParser(description='Panel parameters')
Orange = '#f6921e' Blue = '#0000FF' White = '#FFFFFF'
lasercut_width = '0.01mm'
class SynthPanelEffect(inkex.Effect):
w1 = Scale(master, from_=0, to=80) w1.pack() w2 = Scale(master, from_=0, to=200, orient=HORIZONTAL) w2.pack() hp = w2.get()
... def effect(self): #euro_hp = self.options.eurorack_panel_hp euro_hp = self.hp <--- THIS ONE for example should change when i move the slider instead the value are applied when i close the tkinter ui ... if __name__ == '__main__': # Create effect instance and apply it.
mainloop() SynthPanelEffect().run()
``` 2020-06-07 13-53-39 PDT urbanspaceman so, ``` knob.bounding_box(transform=True) ? ```` 2020-02-04 15-23-32 PST urbanspaceman thanks, i have a pair of beta friends (user, non dev)I try with them before to understand if the UX is optimal 2020-06-03 17-13-16 PDT urbanspaceman ah ok, i use it to draw this 2020-09-02 06-07-08 PDT urbanspaceman then I want to use freesvg as a reference to improve my extension 2020-06-08 08-15-39 PDT urbanspaceman ok, in the evening I try and let you know if it works thanks 2020-06-08 07-15-44 PDT urbanspaceman i have a layer for each element and one main layer with all the element layers inside 2020-07-08 12-51-21 PDT urbanspaceman doc, a user reported this error ``` Traceback (most recent call last):
File "SynthPanelsDesigner.py", line 21, in
import inkex
ModuleNotFoundError: No module named 'inkex'
Ubuntu 18.04 vers SPD 1.0.2 (ma lo fa anche con la v1.0) Inkscape 1.1-dev (1:0.92.0+devel+202005110039+9ce7266) ``` is inkscape 1.1-dev the problem? in the next release inkex disappear? 2020-06-04 03-10-16 PDT urbanspaceman it's ok? 2020-02-04 15-23-35 PST urbanspaceman :-) 2020-06-04 03-08-40 PDT urbanspaceman wow with black now the code has doubled the lines 2020-06-09 02-17-59 PDT urbanspaceman ok, this is strange while the new knob is drawn at the same coordinates of the knob 1 a new slider is regularly drawn at the center of the page 2020-09-02 06-05-20 PDT urbanspaceman no the extension manager 2020-06-06 13-34-02 PDT urbanspaceman doc, i need a workaround for a non-bug on my extension 2020-09-02 06-04-58 PDT urbanspaceman :-) morning! 2020-06-04 16-26-01 PDT urbanspaceman i tred to export a simple design to dxf but is not properly rendered... and if i open the svg with illustrator, some parts are missing 2020-09-02 06-47-07 PDT urbanspaceman yes no problem 2020-09-02 06-09-05 PDT urbanspaceman i want to test the extension manager and update my extension to add compatibility with extension manager 2020-01-22 06-06-02 PST urbanspaceman in my new function for wxample i pass the x, y coordinates to center the circle the offset parameter (the dimension of the circle is n+offset) and the angle 2020-06-03 17-08-48 PDT urbanspaceman ok 2020-06-04 03-10-08 PDT urbanspaceman params now look like this ``` class SynthPanelEffect(inkex.Effect): def add_arguments(self, pars): # Parts pars.add_argument( "--part", type=int, default=1, help="Select which part you want to draw" )
# Panel pars.add_argument("--panel_type", default="e3u", help="Panel type") pars.add_argument("--eurorack_panel_hp", type=int, default=1, help="Panel HP?") pars.add_argument("--api_panel_units", type=int, default=1, help="API Units?") pars.add_argument("--moog_panel_units", type=int, default=1, help="Moog Units?") pars.add_argument( "--panel_color", type=inkex.Color, default="#e6e6e6", help="Panel color" )
pars.add_argument( "--panel_custom_width", type=float, default="100", help="Set the panel custom width", ) pars.add_argument( "--panel_custom_height", type=float, default="100", help="Set the panel custom height", )
pars.add_argument( "--panel_holes", type=inkex.Boolean, default="False", help="Want do drill the mounting holes?", ) pars.add_argument( "--panel_centers", type=inkex.Boolean, default="False", help="Mark centers?" ) pars.add_argument( "--panel_oval", type=inkex.Boolean, default="False", help="Oval holes?" )
pars.add_argument( "--panel_lasercut", type=inkex.Boolean, default="False", help="Lasercut style?", )
# Screws pars.add_argument( "--panel_screws", type=inkex.Boolean, default="False", help="Add screws" ) pars.add_argument( "--panel_screw_radius", type=float, default="100", help="Screw radius" ) pars.add_argument("--panel_screw_type", type=int, default=1, help="Screw type") pars.add_argument( "--panel_screw_color", type=inkex.Color, default="#e6e6e6", help="Screw color", ) pars.add_argument( "--panel_screw_stroke_color", type=inkex.Color, default="#e6e6e6", help="Screw stroke color", ) pars.add_argument( "--panel_screw_stroke_width", type=float, default="100", help="Screw stroke width", ) pars.add_argument( "--panel_screw_tick_color", type=inkex.Color, default="#e6e6e6", help="Screw tick color", ) pars.add_argument( "--panel_screw_tick_width", type=float, default="100", help="Screw tick width", ) ``` 2020-06-03 16-29-32 PDT urbanspaceman doc, i've updated e repo https://gitlab.com/Faselunare/synth-panels-designer 2020-06-08 09-13-06 PDT urbanspaceman ``` Traceback (most recent call last): File "SynthPanelsDesign.py", line 1626, in SynthPanelEffect().run() File "/Applications/Inkscape.app/Contents/Resources/share/inkscape/extensions/inkex/base.py", line 123, in run self.save_raw(self.effect()) File "SynthPanelsDesign.py", line 875, in effect bbox = knob.bounding_box(composed_transform(knob)) File "SynthPanelsDesign.py", line 1620, in composed_transform if parent is not None and isinstance(parent, ShapeElement): NameError: name 'ShapeElement' is not defined ``` 2020-06-03 16-48-29 PDT urbanspaceman done! 2020-06-03 17-12-28 PDT urbanspaceman which line? 2020-06-04 02-45-18 PDT urbanspaceman i have build this function reading value from the xml editor 2020-06-03 16-54-19 PDT urbanspaceman I'm going to sleep, let me know what you think 2020-06-08 07-41-11 PDT urbanspaceman https://streamable.com/q40maw 2020-01-22 06-03-31 PST urbanspaceman @doctormo i need to draw an open circle is arc the right function? 2020-02-04 15-24-32 PST urbanspaceman in the end, this is the about page 2020-01-17 20-02-55 PST urbanspaceman you know if is it possible to load remote file? the idea is to ave a txt file on my server with the extension credits/sponsor and update without touching the extension 2020-06-03 16-46-01 PDT urbanspaceman :-) 2020-06-03 16-45-12 PDT urbanspaceman yes, do you know how do i give you access? 2020-06-07 07-21-32 PDT urbanspaceman I'm not at home in front of my code now and I can't check if I already get the transformed bounding box 2020-06-07 12-09-00 PDT urbanspaceman i use this ``` knob = self.svg.get_selected() bbox = self.svg.get_selected_bbox() ``` how do i get the transformed bbox? 2020-06-04 02-44-34 PDT urbanspaceman simpliified sorry 2020-06-03 17-18-38 PDT urbanspaceman ah ok, 2020-06-10 12-39-49 PDT urbanspaceman Git updated 2020-06-08 07-13-18 PDT urbanspaceman ok, let's see if I can understand
- I have my knob - the scale must be drawn around this knob (not other elements of the page) - so I have to select this knob before drawing the scale - you tell me that I have to use elem but elem is a generic name or instead of elem goes the name of my knob?
I just can't understand. it's probably something that you can solve in 10 minutes by knowing well how inkscape is made
is this not valid? ``` knob = self.svg.get_selected() ``` ? 2020-06-08 08-01-28 PDT urbanspaceman 873 2020-06-03 16-49-32 PDT urbanspaceman which level yoou need? 2020-06-04 02-45-50 PDT urbanspaceman https://chat.inkscape.org/file-upload/9DwEc4iSCXKDJDLTT/Schermata%202020-06-... 2020-06-04 02-44-28 PDT urbanspaceman ``` def draw_vintage_circle(self, x, y, radius, radius2, sides): circ = inkex.PathElement() circ.set('sodipodi:type', 'star') circ.set('sodipodi:cx', x) circ.set('sodipodi:cy', y) circ.set('sodipodi:arg1', 0.85) circ.set('sodipodi:arg2', 1.3) circ.set('inkscape:rounded', 0.5) circ.set('sodipodi:sides', sides) circ.set('sodipodi:r1', radius) circ.set('sodipodi:r2', radius2) return circ ``` 2020-06-04 10-20-56 PDT urbanspaceman ok, require some work to be installed on macosx if i read well 2020-06-09 15-47-44 PDT urbanspaceman now works and i don't know why (!!) 2020-09-02 06-05-35 PDT urbanspaceman i have this version installed on linux 1.0 (4035a4fb49, 2020-05-01) 2020-06-03 17-15-45 PDT urbanspaceman in the UI you have to select vintage on the first column of the knob 2020-09-02 06-03-03 PDT urbanspaceman doc, i want to try the extension manager in which version of inkscape is available? in your freesvg extension i read
``` This Gtk3 extension is designed to be installed and run via the Inkscape Extension Manager. If you're not sure if you have the extension manager installed, you will need to check 'Extension Manager' in your extensions menu and install it first ifit's missing.``` 2020-09-02 06-08-39 PDT urbanspaceman no no my extension is synthpanels designer (www.synthpanels.design) 2020-06-04 02-57-52 PDT urbanspaceman are there any real benefits or does it make sense to invest time? 2020-06-07 05-46-52 PDT urbanspaceman I don't have the code now, is not already made I this way? 2020-06-03 17-17-56 PDT urbanspaceman ? 2020-06-03 16-45-39 PDT urbanspaceman before making it public I would like to be sure I hasn't done stupid things 2020-06-09 02-08-03 PDT urbanspaceman git is not updated 2020-06-03 16-47-20 PDT urbanspaceman found it! give me your email please 2020-06-08 09-55-19 PDT urbanspaceman line 904 2020-06-07 05-19-30 PDT urbanspaceman The extension si not public available but I've start promoting it on Facebook, people get crazy 2020-06-08 08-01-23 PDT urbanspaceman line 872 2020-06-04 02-45-22 PDT urbanspaceman sorry sorry 2020-06-07 13-57-07 PDT urbanspaceman AttributeError: 'generator' object has no attribute 'bounding_box' Inkscape version 1.0 (4035a4f, 2020-05-01) 2020-06-04 16-26-21 PDT urbanspaceman spd_test.dxf (https://chat.inkscape.org/file-upload/WkoEm8oyH93WMLSEN/spd_test.dxf)