Howdy folks,
(sorry about the accidental first send)
As we've discussed more that once we're looking to move a Bazaar repositories on Launchpad over to Git repositories on GitLab. We're now closing in on the time for that migration. We've discussed a schedule in the board meeting this afternoon and I wanted to make sure everyone is aware of the plan. We're expecting 24-hours of "downtime" as part of this.
==== Step 1 ====
Wed, 7 Jun evening US time
We're going to make the Bazaar repositories owned by the project owned by the board and then start migrating them to Git. This will hopefully mean that accidental commits won't happen. The migration to Git will take a few hours, giving it over night to complete (allow for some network hiccups).
==== Step 2 ====
Wed, 8 Jun morning US time
Push the Git repo and branches to GitLab, this should take a little while, but will hopefully be done by the afternoon. We should be generally good to go after that, but will verify a couple of downloads.
==== Step 3 ====
Party!
I'll send an e-mail to the mailing lists for each phase as we go through them with a status update. If you have an open branch on LP, it should be migrated. Please make sure to push before Wed. night the 7th. It would be even better if they could be merged but that shouldn't be required. You should be able to pick up your branch from Gitlab on the other side.
Ted
On Fri, Jun 02, 2017 at 04:15:07PM -0500, Ted Gould wrote:
Howdy folks,
(sorry about the accidental first send)
As we've discussed more that once we're looking to move a Bazaar repositories on Launchpad over to Git repositories on GitLab. We're now closing in on the time for that migration. We've discussed a schedule in the board meeting this afternoon and I wanted to make sure everyone is aware of the plan. We're expecting 24-hours of "downtime" as part of this.
==== Step 1 ====
Wed, 7 Jun evening US time
We're going to make the Bazaar repositories owned by the project owned by the board and then start migrating them to Git. This will hopefully mean that accidental commits won't happen. The migration to Git will take a few hours, giving it over night to complete (allow for some network hiccups).
==== Step 2 ====
Wed, 8 Jun morning US time
Push the Git repo and branches to GitLab, this should take a little while, but will hopefully be done by the afternoon. We should be generally good to go after that, but will verify a couple of downloads.
==== Step 3 ====
Party!
I'll send an e-mail to the mailing lists for each phase as we go through them with a status update. If you have an open branch on LP, it should be migrated. Please make sure to push before Wed. night the 7th. It would be even better if they could be merged but that shouldn't be required. You should be able to pick up your branch from Gitlab on the other side.
Ted
For tracking purposes, let's use the tag 'gitlab-migration' for bug reports. Especially for things we don't need to tackle presently, like the 0.44 import, the bug reports will serve as docs in case someone wants to investigate them further later on. There's a few places in the code where it uses bzr revno's, which will need to be changed to git sha's or whatnot.
Also, just to check Ted, did you get a copy of KK's script to fix up discrepant author names and emails? I can send it to you if not.
Thanks, Bryce
Just as a reminder for anyone a bit rusty on git, we have a cheat sheet page with bzr>git equivalents:
http://wiki.inkscape.org/wiki/index.php/Working_with_Git
If anyone knows of a really good tutorial (particularly for people who already know bzr), definitely add it there.
Bryce
On Fri, Jun 02, 2017 at 04:15:07PM -0500, Ted Gould wrote:
Howdy folks,
(sorry about the accidental first send)
As we've discussed more that once we're looking to move a Bazaar repositories on Launchpad over to Git repositories on GitLab. We're now closing in on the time for that migration. We've discussed a schedule in the board meeting this afternoon and I wanted to make sure everyone is aware of the plan. We're expecting 24-hours of "downtime" as part of this.
==== Step 1 ====
Wed, 7 Jun evening US time
We're going to make the Bazaar repositories owned by the project owned by the board and then start migrating them to Git. This will hopefully mean that accidental commits won't happen. The migration to Git will take a few hours, giving it over night to complete (allow for some network hiccups).
==== Step 2 ====
Wed, 8 Jun morning US time
Push the Git repo and branches to GitLab, this should take a little while, but will hopefully be done by the afternoon. We should be generally good to go after that, but will verify a couple of downloads.
==== Step 3 ====
Party!
I'll send an e-mail to the mailing lists for each phase as we go through them with a status update. If you have an open branch on LP, it should be migrated. Please make sure to push before Wed. night the 7th. It would be even better if they could be merged but that shouldn't be required. You should be able to pick up your branch from Gitlab on the other side.
Ted
-----BEGIN PGP SIGNATURE-----
iQIqBAEBCAAUBQJZMdVbDRx0ZWRAZ291bGQuY3gACgkQnihYbTPmGFzODhAAjLwi iiDFFbRTiL3DLdQbdiQEGMW/eac5Gkq1YCohSyobsJwR+iVJBCxKG7noIYBJlpXj 0CTsCn2gJGg9i6K5xA3zhy/R+TenYr9HrDM4fvNUY8rsaU9fObpdmmSbPYf+kEtL jz7vElimES5x72huAxVKe9znB1pts26omhk3hRXN5XVptlGTQHQmPDl0n0P+Xpis rar2e+0FuxOUjbJjy+DR9WuAeKhKmw0R5o0q9M3M8yUEQqqo4Kk2troO1SiWCiM1 TCa2afgmxG09PHJuH8vrghq0GkppfK+1xIETSBzzej8t+RagaV/fwmXKa5adNwFv muGnPLlYDNnBYHWFLosEvEbPAz7/l0T5fvaNxmuE73RK4lp0mywCrte/RKRaPBZg b72AQWEXxfbXaW7ZIJ5HZ6hP0ucpThzyJLWy3AjQw8a3hQ12DQiMNKkdU13fOwnl rjGK/4XwAg/d3nyuFykwFdqadjm4H/E2YAZuGguFLdXwbeq1H4BZttHoZQ0oEwGq 1LGc5Wyw+hAJtkyNwrs5CvY/wI7ZJB5Fvlvw1fMhuPgqTPqN/cyrmNwriPIrz+/1 AzNeW5zAzOoopiNZdGf5UWSAEcpjMaqQwwL0QtVguDzRT53/9FUwL/8f2m3+ecvu zvEJA+LERmeuT5lBHf/Zo6J577yeVXLCRcMF6Rg= =5oLI -----END PGP SIGNATURE-----
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Hi,
just wondering what bzr->git-tool you use. I remember I read this to get the source:
https://inkscape.org/en/develop/using-git/
"git-bzr-ng" did not work well for me, instead I found:
https://github.com/mnauw/git-remote-bzr
which does a better job.
chr[]
On 03.06.2017 19:13, Bryce Harrington wrote:
Just as a reminder for anyone a bit rusty on git, we have a cheat sheet page with bzr>git equivalents:
http://wiki.inkscape.org/wiki/index.php/Working_with_GitIf anyone knows of a really good tutorial (particularly for people who already know bzr), definitely add it there.
Bryce
On Fri, Jun 02, 2017 at 04:15:07PM -0500, Ted Gould wrote:
Howdy folks,
(sorry about the accidental first send)
As we've discussed more that once we're looking to move a Bazaar repositories on Launchpad over to Git repositories on GitLab. We're now closing in on the time for that migration. We've discussed a schedule in the board meeting this afternoon and I wanted to make sure everyone is aware of the plan. We're expecting 24-hours of "downtime" as part of this.
==== Step 1 ====
Wed, 7 Jun evening US time
We're going to make the Bazaar repositories owned by the project owned by the board and then start migrating them to Git. This will hopefully mean that accidental commits won't happen. The migration to Git will take a few hours, giving it over night to complete (allow for some network hiccups).
==== Step 2 ====
Wed, 8 Jun morning US time
Push the Git repo and branches to GitLab, this should take a little while, but will hopefully be done by the afternoon. We should be generally good to go after that, but will verify a couple of downloads.
==== Step 3 ====
Party!
I'll send an e-mail to the mailing lists for each phase as we go through them with a status update. If you have an open branch on LP, it should be migrated. Please make sure to push before Wed. night the 7th. It would be even better if they could be merged but that shouldn't be required. You should be able to pick up your branch from Gitlab on the other side.
Ted
-----BEGIN PGP SIGNATURE-----
iQIqBAEBCAAUBQJZMdVbDRx0ZWRAZ291bGQuY3gACgkQnihYbTPmGFzODhAAjLwi iiDFFbRTiL3DLdQbdiQEGMW/eac5Gkq1YCohSyobsJwR+iVJBCxKG7noIYBJlpXj 0CTsCn2gJGg9i6K5xA3zhy/R+TenYr9HrDM4fvNUY8rsaU9fObpdmmSbPYf+kEtL jz7vElimES5x72huAxVKe9znB1pts26omhk3hRXN5XVptlGTQHQmPDl0n0P+Xpis rar2e+0FuxOUjbJjy+DR9WuAeKhKmw0R5o0q9M3M8yUEQqqo4Kk2troO1SiWCiM1 TCa2afgmxG09PHJuH8vrghq0GkppfK+1xIETSBzzej8t+RagaV/fwmXKa5adNwFv muGnPLlYDNnBYHWFLosEvEbPAz7/l0T5fvaNxmuE73RK4lp0mywCrte/RKRaPBZg b72AQWEXxfbXaW7ZIJ5HZ6hP0ucpThzyJLWy3AjQw8a3hQ12DQiMNKkdU13fOwnl rjGK/4XwAg/d3nyuFykwFdqadjm4H/E2YAZuGguFLdXwbeq1H4BZttHoZQ0oEwGq 1LGc5Wyw+hAJtkyNwrs5CvY/wI7ZJB5Fvlvw1fMhuPgqTPqN/cyrmNwriPIrz+/1 AzNeW5zAzOoopiNZdGf5UWSAEcpjMaqQwwL0QtVguDzRT53/9FUwL/8f2m3+ecvu zvEJA+LERmeuT5lBHf/Zo6J577yeVXLCRcMF6Rg= =5oLI -----END PGP SIGNATURE-----
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
At the lowest level we're using git's fast-export format that is used by Bazaar. So it's not really a "live" tool as much as we're dumping the repository into a well known format and then reimporting it into Git. The OpenStack built a wrapper for that in their lp2gh[1] tools, but you can split out just the Git migration portion and we don't have to go to GitHub.
Ted
[1] https://github.com/termie/lp2gh
On 06/04/2017 08:19 AM, Christoph Rudorff wrote:
Hi,
just wondering what bzr->git-tool you use. I remember I read this to get the source:
https://inkscape.org/en/develop/using-git/
"git-bzr-ng" did not work well for me, instead I found:
https://github.com/mnauw/git-remote-bzr
which does a better job.
chr[]
On 03.06.2017 19:13, Bryce Harrington wrote:
Just as a reminder for anyone a bit rusty on git, we have a cheat sheet page with bzr>git equivalents:
http://wiki.inkscape.org/wiki/index.php/Working_with_GitIf anyone knows of a really good tutorial (particularly for people who already know bzr), definitely add it there.
Bryce
On Fri, Jun 02, 2017 at 04:15:07PM -0500, Ted Gould wrote:
Howdy folks,
(sorry about the accidental first send)
As we've discussed more that once we're looking to move a Bazaar repositories on Launchpad over to Git repositories on GitLab. We're now closing in on the time for that migration. We've discussed a schedule in the board meeting this afternoon and I wanted to make sure everyone is aware of the plan. We're expecting 24-hours of "downtime" as part of this.
==== Step 1 ====
Wed, 7 Jun evening US time
We're going to make the Bazaar repositories owned by the project owned by the board and then start migrating them to Git. This will hopefully mean that accidental commits won't happen. The migration to Git will take a few hours, giving it over night to complete (allow for some network hiccups).
==== Step 2 ====
Wed, 8 Jun morning US time
Push the Git repo and branches to GitLab, this should take a little while, but will hopefully be done by the afternoon. We should be generally good to go after that, but will verify a couple of downloads.
==== Step 3 ====
Party!
I'll send an e-mail to the mailing lists for each phase as we go through them with a status update. If you have an open branch on LP, it should be migrated. Please make sure to push before Wed. night the 7th. It would be even better if they could be merged but that shouldn't be required. You should be able to pick up your branch from Gitlab on the other side.
Ted
-----BEGIN PGP SIGNATURE-----
iQIqBAEBCAAUBQJZMdVbDRx0ZWRAZ291bGQuY3gACgkQnihYbTPmGFzODhAAjLwi iiDFFbRTiL3DLdQbdiQEGMW/eac5Gkq1YCohSyobsJwR+iVJBCxKG7noIYBJlpXj 0CTsCn2gJGg9i6K5xA3zhy/R+TenYr9HrDM4fvNUY8rsaU9fObpdmmSbPYf+kEtL jz7vElimES5x72huAxVKe9znB1pts26omhk3hRXN5XVptlGTQHQmPDl0n0P+Xpis rar2e+0FuxOUjbJjy+DR9WuAeKhKmw0R5o0q9M3M8yUEQqqo4Kk2troO1SiWCiM1 TCa2afgmxG09PHJuH8vrghq0GkppfK+1xIETSBzzej8t+RagaV/fwmXKa5adNwFv muGnPLlYDNnBYHWFLosEvEbPAz7/l0T5fvaNxmuE73RK4lp0mywCrte/RKRaPBZg b72AQWEXxfbXaW7ZIJ5HZ6hP0ucpThzyJLWy3AjQw8a3hQ12DQiMNKkdU13fOwnl rjGK/4XwAg/d3nyuFykwFdqadjm4H/E2YAZuGguFLdXwbeq1H4BZttHoZQ0oEwGq 1LGc5Wyw+hAJtkyNwrs5CvY/wI7ZJB5Fvlvw1fMhuPgqTPqN/cyrmNwriPIrz+/1 AzNeW5zAzOoopiNZdGf5UWSAEcpjMaqQwwL0QtVguDzRT53/9FUwL/8f2m3+ecvu zvEJA+LERmeuT5lBHf/Zo6J577yeVXLCRcMF6Rg= =5oLI -----END PGP SIGNATURE-----
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
participants (3)
-
Bryce Harrington -
Christoph Rudorff -
Ted Gould