Bob - If I understand correctly, you can do what you want if you make sure that Bounding boxes > Centers is selected in the Snapping menu. - Robert
________________________________ From: Robert Nickels ranickels@gmail.com Sent: November 3, 2023 14:21 To: inkscape-user@lists.inkscape.org inkscape-user@lists.inkscape.org Subject: [Inkscape-user] Right tool for the job?
[You don't often get email from ranickels@gmail.com. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
I'm hoping some experienced Inkscape users can confirm what I'm trying to do is a good fit for Inkscape - or not.
I want to create control panels for electronic equipment which will be printed or laser-engraved. Mostly text, but some simple graphics, and svg output is needed, so my first thought was Inkscape was the right tool for the job. The problem I've been trying to overcome is in positioning text and graphics precisely where it needs to be.
What I'd like is the to position text and graphic objects by center point and position them at specific X-Y locations on the drawing. For example, say I want to position a 1/4" diameter circle precisely over a hole that is located 2" in the X dimension and 1" in the Y dimension (i.e. XY coordinates 2", 1") from the lower left corner of the panel (which is 0",0"). While I've been able to manually subtract the radius or 1/8" and position my circle at 1.875", .875" - that method is more prone to error, especially when it has to be done dozens or hundreds of times. I've tried grids and guides and snapping but haven't found the combination that puts things exactly where I need them.
So my question is, can Inkscape be configured to do what I want to do, and if so, how? I've read the manual and watched tutorials and while but haven't found what I need on my own and thought it would save a lot of time if I'd just explain what I would like in enough detail that more experienced users could offer an opinion.
I know that Inkscape is very powerful and does many things well, but if this isn't one of them I'd rather find a tool that does than continue to be frustrated. Thanks in advance,
Bob _______________________________________________ Inkscape Users mailing list -- inkscape-user@lists.inkscape.org To unsubscribe send an email to inkscape-user-leave@lists.inkscape.org