Re: [Inkscape-devel] possibly strange question (snap)
On 14 Jun 2016 07:35, "C R" <cajhne@...400...> wrote:
- Spacebar switches to selection tool (toggles back and forth between
current and selector), so the key is not free.
While technically correct, this function tosses out the selection data
when it switches, so it's another area where we may want to either improve the functionality by saving the last selected node state between tools-shifts, or overwrite it in the Node Tool context with something better suited to the Node editor (which also functions as a selector, just on a different level).
- There are expert users at inkscapeforum.com who routinely recommend
turning off snapping to gain speed improvements, so there is probably something to it (I never noticed anything, but my drawings are not very complex usually).
Yes, however as noted, this situation is far simpler of a calculation
than the snapping dialog generates, so I recommend trying the enhancement before we make any judgements about pre-judgements about performance. The fact remains, it would be great to see what you are about to select in real-time (or as close as possible).
While I agree in general with your remarks C R, having tried out the feature awhile last night, the ability to toggle selection nodes heavily improves the situation -- If you select the wrong node just toggle it and continue the selection process.
What I mean is the feature is quite useful even without visual hint of what would be selected.
-C
(but the requested feature sounds enormously useful, especially for toggling through nodes that are placed (almost) directly above each
other)
Regards, Maren
Would these, either Spacebar or Enter key, be customizable, using
Inkscape Preferences?
Thanks, brynn
From: C R Sent: Monday, June 13, 2016 9:06 AM To: Brynn Cc: Olof Bjarnason ; LucaDC ; inkscape-devel Subject: Re: [Inkscape-devel] possibly strange question (snap)
Olof and I discussed also using the Enter key as a toggle for
selecting the
node to avoid having to click as much. This key is also free from
bindings in the Node Tool, and makes an intuitive natural key for
selecting/deselecting. As an alternative, I'd suggest the spacebar
(which can be used on websites for toggling radio buttons/checkboxes), but I fear a
clash with grabbing the view to drag, which I also dearly love. :) It's
possible that it's not too much of a clash, as it's tapping vs holding.
-C
On Mon, Jun 13, 2016 at 2:53 PM, Brynn <brynn@...3133...> wrote:
Yes, I watched his video :-)
If we weren't in the middle of a release cycle, it would be nice to
discuss
the mouse snapping or maybe called pointer snapping. But Olof tells
me the
snapping is super heavy in the program.
And I would be happy with either of your solutions :-)
Thanks, brynn _____________________________________________ From: C R Sent: Monday, June 13, 2016 4:19 AM To: Brynn Cc: Olof Bjarnason ; LucaDC ; inkscape-devel
Subject: Re: [Inkscape-devel] possibly strange question (snap)
Clicking and dragging selects every node the circle touches, as if you
were
painting the selection. The distance is controlled by the bounds of the
circle, which is better, since you can control the radius as shown, with the
mouse wheel for extra precision.
Olof's selection tool is better for instances where nodes are very
close
together though (make sure you watch his video):
Both would be awesome to have, but I think Olof is right about the
complexity of the paint select tool being hard to impliment vs his very nice, and tidy solution, which may work better for your case anyway. :)
-C
On Mon, Jun 13, 2016 at 9:37 AM, Brynn <brynn@...3133...> wrote:
Hi C R, From my simple user's perspective, that seems like it should
help.
But the optional distance setting would need to be closer than Inks Prefs
dialog
(and not require a restart, like grab sensitivity). Between the brush idea and the key stroke idea, it seems like
they
are very similar. Either way, it's the area around the mouse pointer
where the
node is selected. So it seems like the "brush" select would be more
fluid.
But how would it be enabled? Do you click to grab the node, or does
just touching it with the "brush" select it? This seems very similar to the lasso select which was mentioned earlier in this thread. If the lasso could
be made to work with the Node tool (in all systems), then maybe you
could just add the "brush" to it? (Of course, keeping in mind my non-technical perspective, hah.)
Thanks for everyone's interest in this :-)All best, brynn ________________________________________________ From: C R Sent: Monday, June 13, 2016 12:54 AM
To: Brynn Cc: LucaDC ; inkscape-devel Subject: Re: [Inkscape-devel] possibly strange question (snap)
See this quick video capture for Blender paint-select feature:
https://www.dropbox.com/s/r38x7q9yjdjggdl/paint_select_blender_demo.mp4?dl=0
As you can, see it's faster and more convenient than anything we've
discussed so far. Precision can be changed on the fly.
Their implementation requires you to commit the selection with the
Escape button, but I don't think this is necessary.
In short, we could do this, but better.
-C
On Mon, Jun 13, 2016 at 12:47 AM, Brynn <brynn@...3133...> wrote:
That sounds helpful too. I would have to try it first, before I know
if it
helps with my particular problem.
It sounds like it essentially makes the pointer bigger?
Isn't that similar to what the Grab Sensitivity does? While it doesn't
affect the Node tool, I've tried with the Selection tool. It works great if the objects on the canvas are far enough apart. But on a crowded canvas,
it seems to want to select objects next to the one I want to select. I
guess Inkscape can't read my mind, and know which object I want.
I wonder if it would be the same case with the node pointer?
All best, brynn
From: C R Sent: Friday, June 10, 2016 1:46 PM To: Brynn Cc: LucaDC ; inkscape-devel
Subject: Re: [Inkscape-devel] possibly strange question (snap)
Blender has a nice solution to the problem of clicking/selecting small
nodes.
If you press "c" it turns the mouse pointer into a circle. You can
adjust the size of this circle with the mouse-wheel, and just paint over the nodes
you want to select with it. press escape when done to exit the
selection
mode. though we could just as easily use the enter key which may be more intuitive.
On Tue, Jun 7, 2016 at 3:48 PM, Brynn <brynn@...3133...> wrote:
Ok, thanks Luca.
Fyi to everyone, Olof is helping make a better and more clear
presentation of the situation and request. Just take me a little time to learn how to make a video (which I should have done years ago).
Thanks again, brynn
From: "LucaDC" <dicappello@...2144...> Sent: Tuesday, June 07, 2016 2:59 AM To: inkscape-devel@lists.sourceforge.net Subject: Re: [Inkscape-devel] possibly strange question (snap)
Brynn wrote
(That would be the first use I've ever found for mouse position values
in the bottom-right corner, that shows the position of the mouse. If you're working in a file where measurement needs to be precise, you can place your
mouse on the precise coordinates.)
This could hardly be called a precise positioning as the displayed
coordinates are rounded and their definition depends on the zoom level. What
you get depends on the discretization of your monitor's pixels
coordinates translated into document's coordinates.
A better way to achieve a precise positioning is using guides: drag out
a guide, open its dialog to set its coordinates and snap to its origin whatever you want to be exactly there.
Luca
-- View this message in context:
http://inkscape.13.x6.nabble.com/possibly-strange-question-snap-tp4976904p49...
Sent from the Inkscape - Dev mailing list archive at Nabble.com.
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and
protocols
are
consuming the most bandwidth. Provides multi-vendor support for
NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and
protocols
are
consuming the most bandwidth. Provides multi-vendor support for
NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and
protocols
are
consuming the most bandwidth. Provides multi-vendor support for
NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and
traffic
patterns at an interface-level. Reveals which users, apps, and protocols
are
consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports.
https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and
traffic
patterns at an interface-level. Reveals which users, apps, and protocols
are
consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
While I agree in general with your remarks C R, having tried out the feature awhile last night, the ability to toggle selection nodes heavily improves the situation -- If you select the wrong node just toggle it and continue the selection process.
What I mean is the feature is quite useful even without visual hint of what would be selected.
I'd take the feature either way, just for clarification. A visual cue would be welcome, even if it's not absolutely necessary, and would add to the ease of use if it is indeed fast enough.
-C
-C
(but the requested feature sounds enormously useful, especially for toggling through nodes that are placed (almost) directly above each
other)
Regards, Maren
Would these, either Spacebar or Enter key, be customizable, using
Inkscape Preferences?
Thanks, brynn
From: C R Sent: Monday, June 13, 2016 9:06 AM To: Brynn Cc: Olof Bjarnason ; LucaDC ; inkscape-devel Subject: Re: [Inkscape-devel] possibly strange question (snap)
Olof and I discussed also using the Enter key as a toggle for
selecting the
node to avoid having to click as much. This key is also free from
bindings in the Node Tool, and makes an intuitive natural key for
selecting/deselecting. As an alternative, I'd suggest the spacebar
(which can be used on websites for toggling radio buttons/checkboxes), but I fear a
clash with grabbing the view to drag, which I also dearly love. :)
It's
possible that it's not too much of a clash, as it's tapping vs holding.
-C
On Mon, Jun 13, 2016 at 2:53 PM, Brynn <brynn@...3133...> wrote:
Yes, I watched his video :-)
If we weren't in the middle of a release cycle, it would be nice to
discuss
the mouse snapping or maybe called pointer snapping. But Olof tells
me the
snapping is super heavy in the program.
And I would be happy with either of your solutions :-)
Thanks, brynn _____________________________________________ From: C R Sent: Monday, June 13, 2016 4:19 AM To: Brynn Cc: Olof Bjarnason ; LucaDC ; inkscape-devel
Subject: Re: [Inkscape-devel] possibly strange question (snap)
Clicking and dragging selects every node the circle touches, as if
you were
painting the selection. The distance is controlled by the bounds of
the
circle, which is better, since you can control the radius as shown, with the
mouse wheel for extra precision.
Olof's selection tool is better for instances where nodes are very
close
together though (make sure you watch his video):
Both would be awesome to have, but I think Olof is right about the
complexity of the paint select tool being hard to impliment vs his very nice, and tidy solution, which may work better for your case anyway. :)
-C
On Mon, Jun 13, 2016 at 9:37 AM, Brynn <brynn@...3133...> wrote:
Hi C R, From my simple user's perspective, that seems like it should
help.
But the optional distance setting would need to be closer than Inks Prefs
dialog
(and not require a restart, like grab sensitivity). Between the brush idea and the key stroke idea, it seems like
they
are very similar. Either way, it's the area around the mouse pointer
where the
node is selected. So it seems like the "brush" select would be more
fluid.
But how would it be enabled? Do you click to grab the node, or does
just touching it with the "brush" select it? This seems very similar to the lasso select which was mentioned earlier in this thread. If the lasso could
be made to work with the Node tool (in all systems), then maybe you
could just add the "brush" to it? (Of course, keeping in mind my non-technical perspective, hah.)
Thanks for everyone's interest in this :-)All best, brynn ________________________________________________ From: C R Sent: Monday, June 13, 2016 12:54 AM
To: Brynn Cc: LucaDC ; inkscape-devel Subject: Re: [Inkscape-devel] possibly strange question (snap)
See this quick video capture for Blender paint-select feature:
https://www.dropbox.com/s/r38x7q9yjdjggdl/paint_select_blender_demo.mp4?dl=0
As you can, see it's faster and more convenient than anything we've
discussed so far. Precision can be changed on the fly.
Their implementation requires you to commit the selection with the
Escape button, but I don't think this is necessary.
In short, we could do this, but better.
-C
On Mon, Jun 13, 2016 at 12:47 AM, Brynn <brynn@...3133...> wrote:
That sounds helpful too. I would have to try it first, before I know
if it
helps with my particular problem.
It sounds like it essentially makes the pointer bigger?
Isn't that similar to what the Grab Sensitivity does? While it
doesn't
affect the Node tool, I've tried with the Selection tool. It works great if the objects on the canvas are far enough apart. But on a crowded canvas,
it seems to want to select objects next to the one I want to select.
I
guess Inkscape can't read my mind, and know which object I want.
I wonder if it would be the same case with the node pointer?
All best, brynn
From: C R Sent: Friday, June 10, 2016 1:46 PM To: Brynn Cc: LucaDC ; inkscape-devel
Subject: Re: [Inkscape-devel] possibly strange question (snap)
Blender has a nice solution to the problem of clicking/selecting small
nodes.
If you press "c" it turns the mouse pointer into a circle. You can
adjust the size of this circle with the mouse-wheel, and just paint over the nodes
you want to select with it. press escape when done to exit the
selection
mode. though we could just as easily use the enter key which may be more intuitive.
On Tue, Jun 7, 2016 at 3:48 PM, Brynn <brynn@...3133...> wrote:
Ok, thanks Luca.
Fyi to everyone, Olof is helping make a better and more clear
presentation of the situation and request. Just take me a little time to learn how to make a video (which I should have done years ago).
Thanks again, brynn
From: "LucaDC" <dicappello@...2144...> Sent: Tuesday, June 07, 2016 2:59 AM To: inkscape-devel@lists.sourceforge.net Subject: Re: [Inkscape-devel] possibly strange question (snap)
Brynn wrote
(That would be the first use I've ever found for mouse position values
in the bottom-right corner, that shows the position of the mouse. If you're working in a file where measurement needs to be precise, you can place your
mouse on the precise coordinates.)
This could hardly be called a precise positioning as the displayed
coordinates are rounded and their definition depends on the zoom level. What
you get depends on the discretization of your monitor's pixels
coordinates translated into document's coordinates.
A better way to achieve a precise positioning is using guides: drag
out
a guide, open its dialog to set its coordinates and snap to its origin whatever you want to be exactly there.
Luca
-- View this message in context:
http://inkscape.13.x6.nabble.com/possibly-strange-question-snap-tp4976904p49...
Sent from the Inkscape - Dev mailing list archive at Nabble.com.
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and
protocols
are
consuming the most bandwidth. Provides multi-vendor support for
NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and
protocols
are
consuming the most bandwidth. Provides multi-vendor support for
NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and
protocols
are
consuming the most bandwidth. Provides multi-vendor support for
NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
What NetFlow Analyzer can do for you? Monitors network bandwidth and
traffic
patterns at an interface-level. Reveals which users, apps, and
protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports.
https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
What NetFlow Analyzer can do for you? Monitors network bandwidth and
traffic
patterns at an interface-level. Reveals which users, apps, and protocols
are
consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports.
https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
On 14 June 2016 at 08:36, C R <cajhne@...400...> wrote:
While I agree in general with your remarks C R, having tried out the
feature awhile last night, the ability to toggle selection nodes heavily improves the situation -- If you select the wrong node just toggle it and continue the selection process.
What I mean is the feature is quite useful even without visual hint of what would be selected.
I'd take the feature either way, just for clarification. A visual cue would be welcome, even if it's not absolutely necessary, and would add to the ease of use if it is indeed fast enough.
Just because the visual que isn't there to start with, doesn't it wont ever be. :)
-C
-C
(but the requested feature sounds enormously useful, especially for toggling through nodes that are placed (almost) directly above each
other)
Regards, Maren
Would these, either Spacebar or Enter key, be customizable, using
Inkscape Preferences?
Thanks, brynn
From: C R Sent: Monday, June 13, 2016 9:06 AM To: Brynn Cc: Olof Bjarnason ; LucaDC ; inkscape-devel Subject: Re: [Inkscape-devel] possibly strange question (snap)
Olof and I discussed also using the Enter key as a toggle for
selecting the
node to avoid having to click as much. This key is also free from
bindings in the Node Tool, and makes an intuitive natural key for
selecting/deselecting. As an alternative, I'd suggest the spacebar
(which can be used on websites for toggling radio buttons/checkboxes), but I fear a
clash with grabbing the view to drag, which I also dearly love. :)
It's
possible that it's not too much of a clash, as it's tapping vs holding.
-C
On Mon, Jun 13, 2016 at 2:53 PM, Brynn <brynn@...3133...> wrote:
Yes, I watched his video :-)
If we weren't in the middle of a release cycle, it would be nice to
discuss
the mouse snapping or maybe called pointer snapping. But Olof tells
me the
snapping is super heavy in the program.
And I would be happy with either of your solutions :-)
Thanks, brynn _____________________________________________ From: C R Sent: Monday, June 13, 2016 4:19 AM To: Brynn Cc: Olof Bjarnason ; LucaDC ; inkscape-devel
Subject: Re: [Inkscape-devel] possibly strange question (snap)
Clicking and dragging selects every node the circle touches, as if
you were
painting the selection. The distance is controlled by the bounds of
the
circle, which is better, since you can control the radius as shown,
with
the
mouse wheel for extra precision.
Olof's selection tool is better for instances where nodes are very
close
together though (make sure you watch his video):
Both would be awesome to have, but I think Olof is right about the
complexity of the paint select tool being hard to impliment vs his very nice, and tidy solution, which may work better for your case anyway. :)
-C
On Mon, Jun 13, 2016 at 9:37 AM, Brynn <brynn@...3133...> wrote:
Hi C R, From my simple user's perspective, that seems like it should
help.
But the optional distance setting would need to be closer than Inks Prefs
dialog
(and not require a restart, like grab sensitivity). Between the brush idea and the key stroke idea, it seems like
they
are very similar. Either way, it's the area around the mouse pointer
where the
node is selected. So it seems like the "brush" select would be more
fluid.
But how would it be enabled? Do you click to grab the node, or does
just touching it with the "brush" select it? This seems very similar
to
the lasso select which was mentioned earlier in this thread. If the lasso could
be made to work with the Node tool (in all systems), then maybe you
could just add the "brush" to it? (Of course, keeping in mind my non-technical perspective, hah.)
Thanks for everyone's interest in this :-)All best, brynn ________________________________________________ From: C R Sent: Monday, June 13, 2016 12:54 AM
To: Brynn Cc: LucaDC ; inkscape-devel Subject: Re: [Inkscape-devel] possibly strange question (snap)
See this quick video capture for Blender paint-select feature:
https://www.dropbox.com/s/r38x7q9yjdjggdl/paint_select_blender_demo.mp4?dl=0
As you can, see it's faster and more convenient than anything we've
discussed so far. Precision can be changed on the fly.
Their implementation requires you to commit the selection with the
Escape button, but I don't think this is necessary.
In short, we could do this, but better.
-C
On Mon, Jun 13, 2016 at 12:47 AM, Brynn <brynn@...3133...> wrote:
That sounds helpful too. I would have to try it first, before I
know if it
helps with my particular problem.
It sounds like it essentially makes the pointer bigger?
Isn't that similar to what the Grab Sensitivity does? While it
doesn't
affect the Node tool, I've tried with the Selection tool. It works great if the objects on the canvas are far enough apart. But on a crowded canvas,
it seems to want to select objects next to the one I want to
select. I
guess Inkscape can't read my mind, and know which object I want.
I wonder if it would be the same case with the node pointer?
All best, brynn
From: C R Sent: Friday, June 10, 2016 1:46 PM To: Brynn Cc: LucaDC ; inkscape-devel
Subject: Re: [Inkscape-devel] possibly strange question (snap)
Blender has a nice solution to the problem of clicking/selecting
small
nodes.
If you press "c" it turns the mouse pointer into a circle. You can
adjust the size of this circle with the mouse-wheel, and just paint
over
the nodes
you want to select with it. press escape when done to exit the
selection
mode. though we could just as easily use the enter key which may be
more
intuitive.
On Tue, Jun 7, 2016 at 3:48 PM, Brynn <brynn@...3133...> wrote:
Ok, thanks Luca.
Fyi to everyone, Olof is helping make a better and more clear
presentation of the situation and request. Just take me a little time to learn how to make a video (which I should have done years ago).
Thanks again, brynn
From: "LucaDC" <dicappello@...2144...> Sent: Tuesday, June 07, 2016 2:59 AM To: inkscape-devel@lists.sourceforge.net Subject: Re: [Inkscape-devel] possibly strange question (snap)
Brynn wrote
(That would be the first use I've ever found for mouse position
values
in the bottom-right corner, that shows the position of the mouse. If you're working in a file where measurement needs to be precise, you can place your
mouse on the precise coordinates.)
This could hardly be called a precise positioning as the displayed
coordinates are rounded and their definition depends on the zoom level. What
you get depends on the discretization of your monitor's pixels
coordinates translated into document's coordinates.
A better way to achieve a precise positioning is using guides: drag
out
a guide, open its dialog to set its coordinates and snap to its origin whatever you want to be exactly there.
Luca
-- View this message in context:
http://inkscape.13.x6.nabble.com/possibly-strange-question-snap-tp4976904p49...
Sent from the Inkscape - Dev mailing list archive at Nabble.com.
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and
protocols
are
consuming the most bandwidth. Provides multi-vendor support for
NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and
protocols
are
consuming the most bandwidth. Provides multi-vendor support for
NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and
protocols
are
consuming the most bandwidth. Provides multi-vendor support for
NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
What NetFlow Analyzer can do for you? Monitors network bandwidth and
traffic
patterns at an interface-level. Reveals which users, apps, and
protocols are
consuming the most bandwidth. Provides multi-vendor support for
NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports.
https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
What NetFlow Analyzer can do for you? Monitors network bandwidth and
traffic
patterns at an interface-level. Reveals which users, apps, and
protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports.
https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
I'd take the feature either way, just for clarification. A visual cue
would be welcome, even if it's not absolutely necessary, and would add to the ease of use if it is indeed fast enough.
Just because the visual que isn't there to start with, doesn't it wont ever be. :)
That's true. If the visual cue is not a priority feature, that's fine. I'd rather have the new feature in a working state for testing than to wait and have it all at once. :)
My 2p.
-C
-C
(but the requested feature sounds enormously useful, especially for toggling through nodes that are placed (almost) directly above each
other)
Regards, Maren
Would these, either Spacebar or Enter key, be customizable, using
Inkscape Preferences?
Thanks, brynn
From: C R Sent: Monday, June 13, 2016 9:06 AM To: Brynn Cc: Olof Bjarnason ; LucaDC ; inkscape-devel Subject: Re: [Inkscape-devel] possibly strange question (snap)
Olof and I discussed also using the Enter key as a toggle for
selecting the
node to avoid having to click as much. This key is also free from
bindings in the Node Tool, and makes an intuitive natural key for
selecting/deselecting. As an alternative, I'd suggest the spacebar
(which can be used on websites for toggling radio buttons/checkboxes), but I fear a
clash with grabbing the view to drag, which I also dearly love. :)
It's
possible that it's not too much of a clash, as it's tapping vs
holding.
-C
On Mon, Jun 13, 2016 at 2:53 PM, Brynn <brynn@...3133...> wrote:
Yes, I watched his video :-)
If we weren't in the middle of a release cycle, it would be nice to
discuss
the mouse snapping or maybe called pointer snapping. But Olof
tells me the
snapping is super heavy in the program.
And I would be happy with either of your solutions :-)
Thanks, brynn _____________________________________________ From: C R Sent: Monday, June 13, 2016 4:19 AM To: Brynn Cc: Olof Bjarnason ; LucaDC ; inkscape-devel
Subject: Re: [Inkscape-devel] possibly strange question (snap)
Clicking and dragging selects every node the circle touches, as if
you were
painting the selection. The distance is controlled by the bounds of
the
circle, which is better, since you can control the radius as shown,
with
the
mouse wheel for extra precision.
Olof's selection tool is better for instances where nodes are very
close
together though (make sure you watch his video):
Both would be awesome to have, but I think Olof is right about the
complexity of the paint select tool being hard to impliment vs his
very
nice, and tidy solution, which may work better for your case anyway.
:)
-C
On Mon, Jun 13, 2016 at 9:37 AM, Brynn <brynn@...3133...> wrote:
Hi C R, From my simple user's perspective, that seems like it should
help.
But the optional distance setting would need to be closer than Inks
Prefs
dialog
(and not require a restart, like grab sensitivity). Between the brush idea and the key stroke idea, it seems like
they
are very similar. Either way, it's the area around the mouse pointer
where the
node is selected. So it seems like the "brush" select would be
more fluid.
But how would it be enabled? Do you click to grab the node, or does
just touching it with the "brush" select it? This seems very similar
to
the lasso select which was mentioned earlier in this thread. If the lasso could
be made to work with the Node tool (in all systems), then maybe you
could just add the "brush" to it? (Of course, keeping in mind my non-technical perspective, hah.)
Thanks for everyone's interest in this :-)All best, brynn ________________________________________________ From: C R Sent: Monday, June 13, 2016 12:54 AM
To: Brynn Cc: LucaDC ; inkscape-devel Subject: Re: [Inkscape-devel] possibly strange question (snap)
See this quick video capture for Blender paint-select feature:
https://www.dropbox.com/s/r38x7q9yjdjggdl/paint_select_blender_demo.mp4?dl=0
As you can, see it's faster and more convenient than anything we've
discussed so far. Precision can be changed on the fly.
Their implementation requires you to commit the selection with the
Escape button, but I don't think this is necessary.
In short, we could do this, but better.
-C
On Mon, Jun 13, 2016 at 12:47 AM, Brynn <brynn@...3133...> wrote:
That sounds helpful too. I would have to try it first, before I
know if it
helps with my particular problem.
It sounds like it essentially makes the pointer bigger?
Isn't that similar to what the Grab Sensitivity does? While it
doesn't
affect the Node tool, I've tried with the Selection tool. It works great if the objects on the canvas are far enough apart. But on a crowded canvas,
it seems to want to select objects next to the one I want to
select. I
guess Inkscape can't read my mind, and know which object I want.
I wonder if it would be the same case with the node pointer?
All best, brynn
From: C R Sent: Friday, June 10, 2016 1:46 PM To: Brynn Cc: LucaDC ; inkscape-devel
Subject: Re: [Inkscape-devel] possibly strange question (snap)
Blender has a nice solution to the problem of clicking/selecting
small
nodes.
If you press "c" it turns the mouse pointer into a circle. You can
adjust the size of this circle with the mouse-wheel, and just paint
over
the nodes
you want to select with it. press escape when done to exit the
selection
mode. though we could just as easily use the enter key which may be
more
intuitive.
On Tue, Jun 7, 2016 at 3:48 PM, Brynn <brynn@...3133...> wrote:
Ok, thanks Luca.
Fyi to everyone, Olof is helping make a better and more clear
presentation of the situation and request. Just take me a little time to learn how to make a video (which I should have done years ago).
Thanks again, brynn
From: "LucaDC" <dicappello@...2144...> Sent: Tuesday, June 07, 2016 2:59 AM To: inkscape-devel@lists.sourceforge.net Subject: Re: [Inkscape-devel] possibly strange question (snap)
Brynn wrote
(That would be the first use I've ever found for mouse position
values
in the bottom-right corner, that shows the position of the mouse. If you're working in a file where measurement needs to be precise, you
can
place your
mouse on the precise coordinates.)
This could hardly be called a precise positioning as the displayed
coordinates are rounded and their definition depends on the zoom
level.
What
you get depends on the discretization of your monitor's pixels
coordinates translated into document's coordinates.
A better way to achieve a precise positioning is using guides: drag
out
a guide, open its dialog to set its coordinates and snap to its origin whatever you want to be exactly there.
Luca
-- View this message in context:
http://inkscape.13.x6.nabble.com/possibly-strange-question-snap-tp4976904p49...
Sent from the Inkscape - Dev mailing list archive at Nabble.com.
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and
protocols
are
consuming the most bandwidth. Provides multi-vendor support for
NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and
protocols
are
consuming the most bandwidth. Provides multi-vendor support for
NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and
protocols
are
consuming the most bandwidth. Provides multi-vendor support for
NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
What NetFlow Analyzer can do for you? Monitors network bandwidth and
traffic
patterns at an interface-level. Reveals which users, apps, and
protocols are
consuming the most bandwidth. Provides multi-vendor support for
NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports.
https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
What NetFlow Analyzer can do for you? Monitors network bandwidth and
traffic
patterns at an interface-level. Reveals which users, apps, and
protocols are
consuming the most bandwidth. Provides multi-vendor support for
NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports.
https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
participants (2)
-
C R -
Olof Bjarnason