Tablet stopped work in Dev builds
I just downloaded the Oct 24 Windows build and found that my tablet isn't working properly with it.
I can move the cursor with tablet pen, but when I press on the tablet nothing draws. I tried toggling the "Use pressure" button.
My tablet still works fine in 0.46 and was working in an earlier build I was using last night (I don't think it was more than a week or two old). Let me know if you require a bug logged for this.
I deleted my preferences.xml, letting Inkscape create a new one. Went into the Input Devices menu and finished the setup.
Doing this solved the problem for me.
Preben (Naga)
-----Original Message----- From: microUgly [mailto:drworm@...1743...] Sent: 26 October, 2008 15:16 To: inkscape-devel@lists.sourceforge.net Subject: [Inkscape-devel] Tablet stopped work in Dev builds
I just downloaded the Oct 24 Windows build and found that my tablet isn't working properly with it.
I can move the cursor with tablet pen, but when I press on the tablet nothing draws. I tried toggling the "Use pressure" button.
My tablet still works fine in 0.46 and was working in an earlier build I was using last night (I don't think it was more than a week or two old). Let me know if you require a bug logged for this. -- View this message in context: http://www.nabble.com/Tablet-stopped-work- in-Dev-builds-tp20171213p20171213.html Sent from the Inkscape - Dev mailing list archive at Nabble.com.
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
That hasn't work for me. I should say, if I didn't already, that i'm using Vista.
Preben Soeberg wrote:
I deleted my preferences.xml, letting Inkscape create a new one. Went into the Input Devices menu and finished the setup.
Doing this solved the problem for me.
Preben (Naga)
-----Original Message----- From: microUgly [mailto:drworm@...1743...] Sent: 26 October, 2008 15:16 To: inkscape-devel@lists.sourceforge.net Subject: [Inkscape-devel] Tablet stopped work in Dev builds
I just downloaded the Oct 24 Windows build and found that my tablet isn't working properly with it.
I can move the cursor with tablet pen, but when I press on the tablet nothing draws. I tried toggling the "Use pressure" button.
My tablet still works fine in 0.46 and was working in an earlier build I was using last night (I don't think it was more than a week or two old). Let me know if you require a bug logged for this. -- View this message in context: http://www.nabble.com/Tablet-stopped-work- in-Dev-builds-tp20171213p20171213.html Sent from the Inkscape - Dev mailing list archive at Nabble.com.
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
I know we're drawing close to a release of 0.47 and I'm not sure that the developers know that the current development builds do not seem to work with Graphics tablets. I'm a little concerned I'm going to be stuck using 0.46 until 0.48 :)
I can confirm the issue with my Wacom Intuous 3 on both Vista 64bit and XP 32 bit. I can confirm that the tablet works in 0.46 for both Vista and XP. I can confirm that on Vista the tablet also works on GIMP 2.6.4.
I can confirm that tablets did work in builds dated around September 2008.
I can also confirm that the Windows XP default drivers for tablets work with 0.46+devel (but I didn't test that pressure worked). It's only after installing the Wacom drivers did interaction with the canvas stop completely.
The tablet works to interact with any of the controls, it just doesn't work to draw on the canvas.
I also know that one of the RC drivers Wacom released killed support in ALL GTK applications. I reverted to the older drivers when that happened.
I'm happy to help test however I can. I'm running XP in a virtual PC so can get quite destructive.
I've included these detail in https://bugs.launchpad.net/inkscape/+bug/334800
microUgly wrote:
That hasn't work for me. I should say, if I didn't already, that i'm using Vista.
Preben Soeberg wrote:
I deleted my preferences.xml, letting Inkscape create a new one. Went into the Input Devices menu and finished the setup.
Doing this solved the problem for me.
Preben (Naga)
-----Original Message----- From: microUgly [mailto:drworm@...1743...] Sent: 26 October, 2008 15:16 To: inkscape-devel@lists.sourceforge.net Subject: [Inkscape-devel] Tablet stopped work in Dev builds
I just downloaded the Oct 24 Windows build and found that my tablet isn't working properly with it.
I can move the cursor with tablet pen, but when I press on the tablet nothing draws. I tried toggling the "Use pressure" button.
My tablet still works fine in 0.46 and was working in an earlier build I was using last night (I don't think it was more than a week or two old). Let me know if you require a bug logged for this. -- View this message in context: http://www.nabble.com/Tablet-stopped-work- in-Dev-builds-tp20171213p20171213.html Sent from the Inkscape - Dev mailing list archive at Nabble.com.
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
On Fri, Apr 24, 2009 at 9:56 PM, microUgly <drworm@...1743...> wrote:
I know we're drawing close to a release of 0.47 and I'm not sure that the developers know that the current development builds do not seem to work with Graphics tablets.
Pressure sensitivity works fine on Linux, so this is likely an issue with GTK build for Linux. Try to roll back the devlibs to a previous version, recompile and see if this helps. If it does, contact Bob Jamison as he compiled the libs.
bulia byak wrote:
Try to roll back the devlibs to a previous version, recompile and see if this helps.
I compiled with the latest devlib and it didn't help (on Vista or XP). I then reverted the devlib back to the beginning of Sept before the GTK was updated but running "build" went through the motions of compiling but the end result was an empty Inkscape folder.
Like I said, I'm a bit of noob. If you can offer some more specific information on how I can go about trouble shooting this, I would really appreciate it.
On 04/26/2009 12:17 PM, microUgly wrote:
I then reverted the devlib back to the beginning of Sept before the GTK was updated but running "build" went through the motions of compiling but the end result was an empty Inkscape folder.
Just some seemingly random thoughts: Did you also roll back the Inkscape sources to the same point in time? Have you tried a clean build by executing "btool clean"? And did you get any error messages?
Diederik
On Sun, Apr 26, 2009 at 7:48 AM, Diederik van Lierop <mail@...1689...> wrote:
On 04/26/2009 12:17 PM, microUgly wrote:
I then reverted the devlib back to the beginning of Sept before the GTK was updated but running "build" went through the motions of compiling but the end result was an empty Inkscape folder.
Just some seemingly random thoughts: Did you also roll back the Inkscape sources to the same point in time? Have you tried a clean build by executing "btool clean"? And did you get any error messages?
Yes, do btool clean first, but do not roll back inkscape source yet - like i said, the issue is more likely to be caused by libraries. And report any error output you're getting.
bulia byak wrote:
Yes, do btool clean first, but do not roll back inkscape source yet - like i said, the issue is more likely to be caused by libraries. And report any error output you're getting.
Hmmm... It's not working. I did btool clean first--seemed to work. Then I ran btool and it went through it's process which takes an hour or so. I didn't notice any errors, but the only result is that it creates the Inkscape folder with no files.
I don't know what to try next.
FWIW, I have a volito2 and just rebuilt clean from svn (Inkscape 0.46+devel r21239, built Apr 27 2009) + updated devlibs, and tablet seems to work for me.
I'm on Vista x64, sv-FI
Wacom 5.08-6 (hmm, maybe it's time to check for an update..)
/Simon
On Mon, Apr 27, 2009 at 2:28 PM, microUgly <drworm@...1743...> wrote:
bulia byak wrote:
Yes, do btool clean first, but do not roll back inkscape source yet - like i said, the issue is more likely to be caused by libraries. And report any error output you're getting.
Hmmm... It's not working. I did btool clean first--seemed to work. Then I ran btool and it went through it's process which takes an hour or so. I didn't notice any errors, but the only result is that it creates the Inkscape folder with no files.
I don't know what to try next.
View this message in context: http://www.nabble.com/Tablet-stopped-work-in-Dev-builds-tp20171213p23254335.... Sent from the Inkscape - Dev mailing list archive at Nabble.com.
Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensign option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
microUgly wrote:
I don't know what to try next.
Ok, so I still have a copy of the precompiled Win32 builds from the period when my Wacom Intuous still worked. I extracted build 19763 and it does work when the recent build does not (for me).
Since I haven't been able compile with prior revisions of Devlib, might there be a trick where I can copy files from the old pre-compiled build to a new one and see if my tablet works then?
I have a conventional roll mouse attached to the PC, working in parallel with the Wacom.
I just got the thought, that it may be needed in order for proper initialization. Have you also a roll mouse attached?
-----Original Message----- From: microUgly [mailto:drworm@...1743...] Sent: 28 April, 2009 04:30 To: inkscape-devel@lists.sourceforge.net Subject: Re: [Inkscape-devel] Tablet stopped work in Dev builds
microUgly wrote:
I don't know what to try next.
Ok, so I still have a copy of the precompiled Win32 builds from the period when my Wacom Intuous still worked. I extracted build 19763 and it does work when the recent build does not (for me).
Since I haven't been able compile with prior revisions of Devlib, might there be a trick where I can copy files from the old pre-compiled build to a new one and see if my tablet works then?
-- View this message in context: http://www.nabble.com/Tablet-stopped-work- in-Dev-builds-tp20171213p23265588.html Sent from the Inkscape - Dev mailing list archive at Nabble.com.
Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensign option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
microUgly wrote:
Since I haven't been able compile with prior revisions of Devlib, might there be a trick where I can copy files from the old pre-compiled build to a new one and see if my tablet works then?
It was suggested to me in a private email to copy all the dlls. I tried copying lib*.dll and *.dll for just inkscape/ but after that inkscape.exe wouldn't start:
"The procedure entry point gtk_adjustment_set_page_increment could not be located in the dynamic link library libgtk-win32-2.0-0.dll".
Replacing that file with the original just leads to another error with the next .dll and I assume the process might continue :)
I'll try to take a look at this tonight micro, I have a couple of tablets and a couple of versions of windows so will try and pin down what rev (or lib change) broke it.
Cheers
John
2009/4/28 microUgly <drworm@...1743...>:
microUgly wrote:
Since I haven't been able compile with prior revisions of Devlib, might there be a trick where I can copy files from the old pre-compiled build to a new one and see if my tablet works then?
It was suggested to me in a private email to copy all the dlls. I tried copying lib*.dll and *.dll for just inkscape/ but after that inkscape.exe wouldn't start:
"The procedure entry point gtk_adjustment_set_page_increment could not be located in the dynamic link library libgtk-win32-2.0-0.dll".
Replacing that file with the original just leads to another error with the next .dll and I assume the process might continue :)
-- View this message in context: http://www.nabble.com/Tablet-stopped-work-in-Dev-builds-tp20171213p23274238.... Sent from the Inkscape - Dev mailing list archive at Nabble.com.
Register Now & Save for Velocity, the Web Performance & Operations Conference from O'Reilly Media. Velocity features a full day of expert-led, hands-on workshops and two days of sessions from industry leaders in dedicated Performance & Operations tracks. Use code vel09scf and Save an extra 15% before 5/3. http://p.sf.net/sfu/velocityconf _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
john cliff-2 wrote:
I'll try to take a look at this tonight micro, I have a couple of tablets and a couple of versions of windows so will try and pin down what rev (or lib change) broke it.
I just had a break through. The Input Devices controls aren't reflecting the true value. By default the Mode for the stylus says Screen. But it's not, it's disabled.
I stumbed on this when I switch the device to the tablet eraser, which was disabled, and when I switched back to Stylus it was also now reported as disabled instead of screen. I then changed the mode, to screen.
That's the short story. The longer story was that the drop down list wouldn't change at all when I tried. And the position of the cursor and where the pen would draw on the canvas we largely offset. Deleting everything including appdata seems to have corrected it.
Although, the mouse cursor is behaving oddly with the calligraphy tool. The tool only draw whilst the mouse is moving. Don't say "duh" :) The position of the cursor is offset from where it draws, and if you draw a straight line from left to right the mouse will be further right than the line. If you then move the mouse left, the line will continue to extend to the right until it meets the cursor.
I don't have these problems with Wacom on XP with latest SVN and devlib. My Wacom driver is ver. 6.1.0-5.
But I would like to have some rate limiting on the tablet mouse and pen. The mouse and pen must be removed from the tablet to get work done.
-----Original Message----- From: microUgly [mailto:drworm@...1743...] Sent: 25 April, 2009 07:57 To: inkscape-devel@lists.sourceforge.net Subject: Re: [Inkscape-devel] Tablet stopped work in Dev builds
I know we're drawing close to a release of 0.47 and I'm not sure that the developers know that the current development builds do not seem to work with Graphics tablets. I'm a little concerned I'm going to be stuck using 0.46 until 0.48 :)
I can confirm the issue with my Wacom Intuous 3 on both Vista 64bit and XP 32 bit. I can confirm that the tablet works in 0.46 for both Vista and XP. I can confirm that on Vista the tablet also works on GIMP 2.6.4.
I can confirm that tablets did work in builds dated around September 2008.
I can also confirm that the Windows XP default drivers for tablets work with 0.46+devel (but I didn't test that pressure worked). It's only after installing the Wacom drivers did interaction with the canvas stop completely.
The tablet works to interact with any of the controls, it just doesn't work to draw on the canvas.
I also know that one of the RC drivers Wacom released killed support in ALL GTK applications. I reverted to the older drivers when that happened.
I'm happy to help test however I can. I'm running XP in a virtual PC so can get quite destructive.
I've included these detail in https://bugs.launchpad.net/inkscape/+bug/334800
microUgly wrote:
That hasn't work for me. I should say, if I didn't already, that i'm using Vista.
Preben Soeberg wrote:
I deleted my preferences.xml, letting Inkscape create a new one. Went into the Input Devices menu and finished the setup.
Doing this solved the problem for me.
Preben (Naga)
-----Original Message----- From: microUgly [mailto:drworm@...1743...] Sent: 26 October, 2008 15:16 To: inkscape-devel@lists.sourceforge.net Subject: [Inkscape-devel] Tablet stopped work in Dev builds
I just downloaded the Oct 24 Windows build and found that my tablet isn't working properly with it.
I can move the cursor with tablet pen, but when I press on the tablet nothing draws. I tried toggling the "Use pressure" button.
My tablet still works fine in 0.46 and was working in an earlier build
I
was using last night (I don't think it was more than a week or two old). Let me know if you require a bug logged for this. -- View this message in context: http://www.nabble.com/Tablet-stopped-
work-
in-Dev-builds-tp20171213p20171213.html Sent from the Inkscape - Dev mailing list archive at Nabble.com.
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
--
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
-- View this message in context: http://www.nabble.com/Tablet-stopped-work- in-Dev-builds-tp20171213p23227202.html Sent from the Inkscape - Dev mailing list archive at Nabble.com.
Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensign option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
I'm a noob at this, but I'll try to compile myself and see if it makes a difference. I think that's what's being suggested right?
Preben Soeberg wrote:
I don't have these problems with Wacom on XP with latest SVN and devlib. My Wacom driver is ver. 6.1.0-5.
But I would like to have some rate limiting on the tablet mouse and pen. The mouse and pen must be removed from the tablet to get work done.
-----Original Message----- From: microUgly [mailto:drworm@...1743...] Sent: 25 April, 2009 07:57 To: inkscape-devel@lists.sourceforge.net Subject: Re: [Inkscape-devel] Tablet stopped work in Dev builds
I know we're drawing close to a release of 0.47 and I'm not sure that the developers know that the current development builds do not seem to work with Graphics tablets. I'm a little concerned I'm going to be stuck using 0.46 until 0.48 :)
I can confirm the issue with my Wacom Intuous 3 on both Vista 64bit and XP 32 bit. I can confirm that the tablet works in 0.46 for both Vista and XP. I can confirm that on Vista the tablet also works on GIMP 2.6.4.
I can confirm that tablets did work in builds dated around September 2008.
I can also confirm that the Windows XP default drivers for tablets work with 0.46+devel (but I didn't test that pressure worked). It's only after installing the Wacom drivers did interaction with the canvas stop completely.
The tablet works to interact with any of the controls, it just doesn't work to draw on the canvas.
I also know that one of the RC drivers Wacom released killed support in ALL GTK applications. I reverted to the older drivers when that happened.
I'm happy to help test however I can. I'm running XP in a virtual PC so can get quite destructive.
I've included these detail in https://bugs.launchpad.net/inkscape/+bug/334800
microUgly wrote:
That hasn't work for me. I should say, if I didn't already, that i'm using Vista.
Preben Soeberg wrote:
I deleted my preferences.xml, letting Inkscape create a new one. Went into the Input Devices menu and finished the setup.
Doing this solved the problem for me.
Preben (Naga)
-----Original Message----- From: microUgly [mailto:drworm@...1743...] Sent: 26 October, 2008 15:16 To: inkscape-devel@lists.sourceforge.net Subject: [Inkscape-devel] Tablet stopped work in Dev builds
I just downloaded the Oct 24 Windows build and found that my tablet isn't working properly with it.
I can move the cursor with tablet pen, but when I press on the tablet nothing draws. I tried toggling the "Use pressure" button.
My tablet still works fine in 0.46 and was working in an earlier
build I
was using last night (I don't think it was more than a week or two old). Let me know if you require a bug logged for this. -- View this message in context: http://www.nabble.com/Tablet-stopped-
work-
in-Dev-builds-tp20171213p20171213.html Sent from the Inkscape - Dev mailing list archive at Nabble.com.
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win
great
prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
--
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
-- View this message in context: http://www.nabble.com/Tablet-stopped-work- in-Dev-builds-tp20171213p23227202.html Sent from the Inkscape - Dev mailing list archive at Nabble.com.
Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensign option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensign option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
I don't think I tried to suggest anything, but I wish you success compiling.
I tried to upgrade to the latest Wacom driver. It made no difference.
-----Original Message----- From: microUgly [mailto:drworm@...1743...] Sent: 25 April, 2009 20:08 To: inkscape-devel@lists.sourceforge.net Subject: Re: [Inkscape-devel] Tablet stopped work in Dev builds
I'm a noob at this, but I'll try to compile myself and see if it makes a difference. I think that's what's being suggested right?
Preben Soeberg wrote:
I don't have these problems with Wacom on XP with latest SVN and devlib. My Wacom driver is ver. 6.1.0-5.
But I would like to have some rate limiting on the tablet mouse and pen. The mouse and pen must be removed from the tablet to get work done.
-----Original Message----- From: microUgly [mailto:drworm@...1743...] Sent: 25 April, 2009 07:57 To: inkscape-devel@lists.sourceforge.net Subject: Re: [Inkscape-devel] Tablet stopped work in Dev builds
I know we're drawing close to a release of 0.47 and I'm not sure that
the
developers know that the current development builds do not seem to work with Graphics tablets. I'm a little concerned I'm going to be stuck using 0.46 until 0.48 :)
I can confirm the issue with my Wacom Intuous 3 on both Vista 64bit and XP 32 bit. I can confirm that the tablet works in 0.46 for both Vista and XP. I can confirm that on Vista the tablet also works on GIMP 2.6.4.
I can confirm that tablets did work in builds dated around September 2008.
I can also confirm that the Windows XP default drivers for tablets work with 0.46+devel (but I didn't test that pressure worked). It's only after installing the Wacom drivers did interaction with the canvas stop completely.
The tablet works to interact with any of the controls, it just doesn't work to draw on the canvas.
I also know that one of the RC drivers Wacom released killed support in ALL GTK applications. I reverted to the older drivers when that happened.
I'm happy to help test however I can. I'm running XP in a virtual PC
so
can get quite destructive.
I've included these detail in https://bugs.launchpad.net/inkscape/+bug/334800
microUgly wrote:
That hasn't work for me. I should say, if I didn't already, that i'm using Vista.
Preben Soeberg wrote:
I deleted my preferences.xml, letting Inkscape create a new one. Went into the Input Devices menu and finished the setup.
Doing this solved the problem for me.
Preben (Naga)
-----Original Message----- From: microUgly [mailto:drworm@...1743...] Sent: 26 October, 2008 15:16 To: inkscape-devel@lists.sourceforge.net Subject: [Inkscape-devel] Tablet stopped work in Dev builds
I just downloaded the Oct 24 Windows build and found that my tablet isn't working properly with it.
I can move the cursor with tablet pen, but when I press on the
tablet
nothing draws. I tried toggling the "Use pressure" button.
My tablet still works fine in 0.46 and was working in an earlier
build I
was using last night (I don't think it was more than a week or two
old).
Let me know if you require a bug logged for this. -- View this message in context: http://www.nabble.com/Tablet-stopped-
work-
in-Dev-builds-tp20171213p20171213.html Sent from the Inkscape - Dev mailing list archive at Nabble.com.
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win
great
prizes Grand prize is a trip for two to an Open Source event anywhere in
the
world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
--
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win
great
prizes Grand prize is a trip for two to an Open Source event anywhere in
the
world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
-- View this message in context: http://www.nabble.com/Tablet-stopped-
work-
in-Dev-builds-tp20171213p23227202.html Sent from the Inkscape - Dev mailing list archive at Nabble.com.
Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensign option that enables unlimited royalty-free distribution of the report engine for externally
facing
server and web deployment. http://p.sf.net/sfu/businessobjects _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensign option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
-- View this message in context: http://www.nabble.com/Tablet-stopped-work- in-Dev-builds-tp20171213p23231918.html Sent from the Inkscape - Dev mailing list archive at Nabble.com.
Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensign option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects _______________________________________________ Inkscape-devel mailing list Inkscape-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel
participants (6)
-
bulia byak -
Diederik van Lierop -
john cliff -
microUgly -
Preben Soeberg -
Simon Dahlbacka