April 2021 - Webmaster - Inkscape Mailman

[Webmaster] Undeliverable: Your registration on inkscape.org
by postmaster＠stokehigh.co.uk 29 Apr '21

29 Apr '21

[https://products.office.com/en-us/CMSImages/Office365Logo_Orange.png?versio…] Your message to kclarke19(a)stokehigh.co.uk couldn't be delivered. kclarke19 wasn't found at stokehigh.co.uk. webmaster Office 365 kclarke19 Action Required Recipient Unknown To address How to Fix It The address may be misspelled or may not exist. Try one or more of the following: * Send the message again following these steps: In Outlook, open this non-delivery report (NDR) and choose Send Again from the Report ribbon. In Outlook on the web, select this NDR, then select the link "To send this message again, click here." Then delete and retype the entire recipient address. If prompted with an Auto-Complete List suggestion don't select it. After typing the complete address, click Send. * Contact the recipient (by phone, for example) to check that the address exists and is correct. * The recipient may have set up email forwarding to an incorrect address. Ask them to check that any forwarding they've set up is working correctly. * Clear the recipient Auto-Complete List in Outlook or Outlook on the web by following the steps in this article: Fix email delivery issues for error code 5.1.10 in Office 365<https://go.microsoft.com/fwlink/?LinkId=532972>, and then send the message again. Retype the entire recipient address before selecting Send. If the problem continues, forward this message to your email admin. If you're an email admin, refer to the More Info for Email Admins section below. Was this helpful? Send feedback to Microsoft<https://go.microsoft.com/fwlink/?LinkId=525921>. ________________________________ More Info for Email Admins Status code: 550 5.1.10 This error occurs because the sender sent a message to an email address hosted by Office 365 but the address is incorrect or doesn't exist at the destination domain. The error is reported by the recipient domain's email server, but most often it must be fixed by the person who sent the message. If the steps in the How to Fix It section above don't fix the problem, and you're the email admin for the recipient, try one or more of the following: The email address exists and is correct - Confirm that the recipient address exists, is correct, and is accepting messages. Synchronize your directories - If you have a hybrid environment and are using directory synchronization make sure the recipient's email address is synced correctly in both Office 365 and in your on-premises directory. Errant forwarding rule - Check for forwarding rules that aren't behaving as expected. Forwarding can be set up by an admin via mail flow rules or mailbox forwarding address settings, or by the recipient via the Inbox Rules feature. Recipient has a valid license - Make sure the recipient has an Office 365 license assigned to them. The recipient's email admin can use the Office 365 admin center to assign a license (Users > Active Users > select the recipient > Assigned License > Edit). Mail flow settings and MX records are not correct - Misconfigured mail flow or MX record settings can cause this error. Check your Office 365 mail flow settings to make sure your domain and any mail flow connectors are set up correctly. Also, work with your domain registrar to make sure the MX records for your domain are configured correctly. For more information and additional tips to fix this issue, see Fix email delivery issues for error code 5.1.10 in Office 365<https://go.microsoft.com/fwlink/?LinkId=532972>. Original Message Details Created Date: 4/29/2021 11:45:30 AM Sender Address: webmaster(a)inkscape.org Recipient Address: kclarke19(a)stokehigh.co.uk Subject: Your registration on inkscape.org Error Details Reported error: 550 5.1.10 RESOLVER.ADR.RecipientNotFound; Recipient kclarke19(a)stokehigh.co.uk not found by SMTP address lookup DSN generated by: PA4PR01MB7760.eurprd01.prod.exchangelabs.com Message Hops HOP TIME (UTC) FROM TO WITH RELAY TIME 1 4/29/2021 11:45:30 AM inkscape1.osuosl.org inkscape1.osuosl.org ESMTP * 2 4/29/2021 11:45:30 AM inkscape1.osuosl.org smtp2.osuosl.org ESMTP * 3 4/29/2021 11:45:30 AM smtp2.osuosl.org localhost ESMTP * 4 4/29/2021 11:45:31 AM localhost smtp2.osuosl.org ESMTP 1 sec 5 4/29/2021 11:45:33 AM smtp2.osuosl.org HE1EUR01FT031.mail.protection.outlook.com Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) 2 sec 6 4/29/2021 11:45:35 AM HE1EUR01FT031.eop-EUR01.prod.protection.outlook.com AM6P195CA0100.outlook.office365.com Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) 2 sec 7 4/29/2021 11:45:35 AM AM6P195CA0100.EURP195.PROD.OUTLOOK.COM PA4PR01MB7760.eurprd01.prod.exchangelabs.com Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) * Original Message Headers Received: from AM6P195CA0100.EURP195.PROD.OUTLOOK.COM (2603:10a6:209:86::41) by PA4PR01MB7760.eurprd01.prod.exchangelabs.com (2603:10a6:102:cc::20) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.4065.23; Thu, 29 Apr 2021 11:45:35 +0000 Received: from HE1EUR01FT031.eop-EUR01.prod.protection.outlook.com (2603:10a6:209:86:cafe::25) by AM6P195CA0100.outlook.office365.com (2603:10a6:209:86::41) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.4087.27 via Frontend Transport; Thu, 29 Apr 2021 11:45:35 +0000 Authentication-Results: spf=pass (sender IP is 140.211.166.133) smtp.mailfrom=inkscape.org; stokehigh.co.uk; dkim=none (message not signed) header.d=none;stokehigh.co.uk; dmarc=bestguesspass action=none header.from=inkscape.org; Received-SPF: Pass (protection.outlook.com: domain of inkscape.org designates 140.211.166.133 as permitted sender) receiver=protection.outlook.com; client-ip=140.211.166.133; helo=smtp2.osuosl.org; Received: from smtp2.osuosl.org (140.211.166.133) by HE1EUR01FT031.mail.protection.outlook.com (10.152.0.177) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.4065.21 via Frontend Transport; Thu, 29 Apr 2021 11:45:33 +0000 Received: from localhost (localhost [127.0.0.1]) by smtp2.osuosl.org (Postfix) with ESMTP id 4F91740686 for <kclarke19(a)stokehigh.co.uk>; Thu, 29 Apr 2021 11:45:31 +0000 (UTC) X-Virus-Scanned: amavisd-new at osuosl.org Received: from smtp2.osuosl.org ([127.0.0.1]) by localhost (smtp2.osuosl.org [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id ye4s83T0QeDh for <kclarke19(a)stokehigh.co.uk>; Thu, 29 Apr 2021 11:45:30 +0000 (UTC) Received: from inkscape1.osuosl.org (inkscape1.osuosl.org [140.211.9.79]) by smtp2.osuosl.org (Postfix) with ESMTP id BB78940683 for <kclarke19(a)stokehigh.co.uk>; Thu, 29 Apr 2021 11:45:30 +0000 (UTC) Received: from inkscape1.osuosl.org (localhost [IPv6:::1]) by inkscape1.osuosl.org (Postfix) with ESMTP id 821951B91 for <kclarke19(a)stokehigh.co.uk>; Thu, 29 Apr 2021 11:45:30 +0000 (UTC) Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Subject: Your registration on inkscape.org From: webmaster(a)inkscape.org To: kclarke19(a)stokehigh.co.uk Date: Thu, 29 Apr 2021 11:45:30 -0000 Message-ID: <20210429114530.22913.38812(a)inkscape1.osuosl.org> Return-Path: webmaster(a)inkscape.org X-EOPAttributedMessage: 0 X-EOPTenantAttributedMessage: f7948c00-e0bd-4c90-bd68-f198833d07a5:0 X-MS-PublicTrafficType: Email X-MS-Office365-Filtering-Correlation-Id: 72feaee3-019b-492e-b664-08d90b044c23 X-MS-TrafficTypeDiagnostic: PA4PR01MB7760:

1 0

[Webmaster] Rocket.Chat, 2 Users, 175 Messages, 5 Files, 515657 Minutes, in Direct Message Between: adam.belis & Lazur
by no-reply＠chat.inkscape.org 29 Apr '21

29 Apr '21

2021-02-13 12-57-13 PST Lazur and with doing that hundreds of times it is a pain to wait every time 2021-02-13 12-56-36 PST Lazur see that it takes no time to select a path at the start then around 10 minutes it's more than a second 2021-02-13 12-55-59 PST Lazur can't get more mempry into this machine 2020-05-05 14-54-44 PDT Lazur guess using a brush and oil paint on canvas is the best 2020-05-05 14-49-42 PDT Lazur the experience is it's not working 2020-05-05 14-51-32 PDT Lazur https://www.youtube.com/watch?v=DZz3y6r-5H8 2020-05-05 14-56-35 PDT Lazur how ironic :D 2021-02-13 12-55-20 PST Lazur costed a fortune :/ 2021-02-13 13-00-01 PST Lazur but in use, no 2021-02-13 11-19-53 PST Lazur hey 2021-02-13 12-51-18 PST Lazur here it is 2021-02-16 11-21-00 PST Lazur hey 2021-02-13 12-54-40 PST Lazur it's win10 2021-02-13 13-13-48 PST Lazur here I go 2021-02-13 14-47-23 PST Lazur I see 2021-02-13 13-06-17 PST Lazur :( 2021-02-13 14-45-32 PST Lazur how so 2021-02-13 14-00-14 PST Lazur another 30 mins to go 2021-02-13 13-10-15 PST Lazur too much to focus on 2021-02-13 14-41-54 PST Lazur the performance 2021-02-13 11-21-35 PST Lazur it's relative 2021-02-13 12-54-37 PST Lazur no 2021-02-13 14-00-42 PST Lazur yeah 2021-02-13 14-49-23 PST Lazur feelsgoodman 2021-02-13 13-03-53 PST Lazur I know how the gradient tool can be used 2021-02-13 13-00-47 PST Lazur missing clicking on the start end and reselecting again takes more time 2021-02-13 13-00-15 PST Lazur it's pointer is hard to select the handle 2021-02-13 13-01-41 PST Lazur failed there several times in the video too 2021-02-13 12-59-50 PST Lazur maybe so theoretically 2021-02-13 11-25-05 PST Lazur sort of 2021-02-13 13-01-27 PST Lazur btw would be much easier if in-between gradient steps can be locked so they cannot be clicked accidentally 2021-02-13 13-02-05 PST Lazur wouldn want only start-end nodes, nothing in between 2021-02-13 13-02-13 PST Lazur distracting the output 2021-02-13 11-20-07 PST Lazur https://we.tl/t-1AurZZ567B 2021-02-13 12-51-13 PST Lazur https://www.youtube.com/watch?v=maWy1DiN3BM&feature=youtu.be 2021-02-13 13-04-17 PST Lazur it's pointer is too large and hard to move to the exact pixels unlike the node tool 2021-02-13 13-05-18 PST Lazur is it possible resetting its cursor? 2021-02-13 13-05-42 PST Lazur without compiling a custom version that is 2021-02-13 13-06-31 PST Lazur so beta may be the solution then 2021-02-13 13-07-31 PST Lazur the main pointer is small and hard to grasp where it's at 2021-02-13 13-08-01 PST Lazur unlike the node tool's which is pointing to an exact spot from a diagonal way 2021-02-13 13-08-17 PST Lazur the cross blocks reference from below 2021-02-13 13-08-51 PST Lazur visual cues like next to/right below, instead it's "approximately there" 2021-02-13 13-09-02 PST Lazur and that white border makes it worse 2021-02-13 13-09-19 PST Lazur then there is the unnecessaryicon of the gradient tool that does nothing 2021-02-13 13-09-39 PST Lazur and gets even worse when indicating a hit on the gradient step 2021-02-13 13-10-04 PST Lazur like what is that blinking 2021-02-13 13-13-44 PST Lazur oh just opened the preferences and the selector tool can also edit the gradients? cool! 2021-02-13 13-14-21 PST Lazur now where to find how to display larger handle nodes 2021-02-13 13-16-57 PST Lazur and can switch off the cursors alltogether:chart_with_upwards_trend: 2021-02-13 13-18-27 PST Lazur ok, will now do another screen recording with these settings 2021-02-13 13-18-46 PST Lazur now what tool to use to display mouse movements 2021-02-13 13-59-46 PST Lazur ok, keystrokes, mouse clicks displayed 2021-02-13 13-59-59 PST Lazur starting fresh, cameras are rolling 2021-02-13 14-01-05 PST Lazur as it says in the metadata it started in 2019 2021-02-13 14-33-05 PST Lazur ok, it's night and day 2021-02-13 14-42-17 PST Lazur using the oject tool doesn't create lagging 2021-02-13 14-41-50 PST Lazur https://www.youtube.com/watch?v=x8yQp1pqHRA&feature=youtu.be 2021-02-13 14-42-24 PST Lazur doing the exact same thing 2021-02-13 14-44-37 PST Lazur its down to 3 clicks already 2021-02-13 14-45-21 PST Lazur that's the same with the gradient tool 2021-02-13 14-45-46 PST Lazur one click selecting the object 2021-02-13 14-46-10 PST Lazur then clicking the start, then the end handle 2021-02-13 14-47-18 PST Lazur so that is one click for selecting, then click and drag 2021-02-13 14-48-30 PST Lazur so maybe it can be finished before 2029 2021-02-13 14-48-39 PST Lazur :chart_with_upwards_trend: 2021-02-16 11-21-24 PST Lazur using the gradient tool for these gradients and the same issue applies 2021-02-16 11-21-46 PST Lazur it gets lagging unlike at the start 2021-02-16 11-22-05 PST Lazur will make another screen capture 2021-02-16 11-22-17 PST Lazur will report back in an hour 2021-02-16 12-24-53 PST Lazur it's undo history related 2021-02-16 16-21-43 PST Lazur after some other tests it uses the processr power rather the memory 2021-02-16 16-22-44 PST Lazur and had two instances where the problem didn't appear up until I changed a few hundred object's solid fill to linear gradient at once 2021-02-16 16-23-02 PST Lazur after that editing the gradients got noticeably slower 2020-05-05 14-58-35 PDT Lazur I'd like to go forward 2020-05-05 14-45-20 PDT Lazur thank's for looking at it 2021-02-13 11-25-15 PST Lazur because it takes time getting there :D 2021-02-13 11-24-25 PST Lazur not sure about how to measure it 2021-02-13 11-24-08 PST Lazur it builds up in a linear fashion I guess 2021-02-13 11-23-40 PST Lazur not much of a lagging on a single object but builds up multiplying the drawing time 2021-02-13 11-22-51 PST Lazur it builds up to a few seconds for selecting 2021-02-13 11-22-36 PST Lazur and when at first it's all by an instant 2021-02-13 11-22-21 PST Lazur selecting the two handle points one after another and repositionoing them 2021-02-13 11-21-59 PST Lazur there are hundreds of gradients I want to adjust 2021-02-13 11-20-05 PST Lazur it's actually the same drawing 2020-05-05 14-49-02 PDT Lazur not sure if that ever going to happen 2020-05-05 14-50-04 PDT Lazur rather should have placed those paths with gradient fills already 2020-05-05 14-54-29 PDT Lazur and then some cast shadows and filtering 2021-02-13 12-57-57 PST Lazur just downloaded sharex, can't remember which program I used before capturing mouse clicks 2020-05-05 14-45-09 PDT Lazur nice 2021-02-13 12-32-47 PST Lazur should I share it here or upload it to youtube? 2021-02-13 12-30-20 PST Lazur made a screen capture for 30 mins 2021-02-13 12-57-14 PST Adam Belis oh i seee .... dont see clicks so it is ahrd to se that on video :? 2021-02-13 12-56-19 PST Adam Belis for changin gradients ? 2021-02-13 12-56-04 PST Adam Belis also have you treid using gradetinet tool ? 2020-05-05 14-52-35 PDT Adam Belis nNY25TGWdo.mp4 (https://chat.inkscape.org/file-upload/ZYWeMhZFMYAxPxrer/nNY25TGWdo.mp4) 2020-05-05 14-45-52 PDT Adam Belis but i would not wont to work on this :D ite chuging hard in ink scape in illustator its much better 2020-05-05 14-46-23 PDT Adam Belis but actually if i turn on layers and work on one at te time its ok 2020-05-05 14-56-11 PDT Adam Belis you know what ? it does nto kill illustrator 2020-05-05 14-54-43 PDT Adam Belis ok that would kill even illustrator 2020-05-05 14-52-38 PDT Adam Belis look how fus it could be done :D 2020-05-05 14-48-39 PDT Adam Belis btw its going to look cool once you finis it :D 2020-05-05 14-44-17 PDT Adam Belis lets not spam vectors 2021-02-13 11-27-10 PST Adam Belis sounds like a memory leak pls try to report it 2021-02-13 11-20-03 PST Adam Belis hello 2021-02-13 14-48-46 PST Adam Belis :D sonks 2021-02-13 14-49-36 PST Adam Belis :D 2021-02-13 13-05-57 PST Adam Belis yes in 1.1 2021-02-13 12-30-35 PST Adam Belis good good 2021-02-13 14-37-38 PST Adam Belis what is ? 2021-02-13 12-58-29 PST Adam Belis btw 2021-02-13 14-48-55 PST Adam Belis profit 2021-02-13 14-45-26 PST Adam Belis no its not 2021-02-13 13-06-04 PST Adam Belis no in 1.0.3 2021-02-13 13-00-17 PST Adam Belis how so 2021-02-13 11-24-27 PST Adam Belis probably 2021-02-13 12-52-03 PST Adam Belis never mind 2021-02-13 14-42-34 PST Adam Belis intresting 2021-02-13 12-58-25 PST Adam Belis ahd have plugin for shoing my controls 2021-02-13 13-03-22 PST Adam Belis you have to dowlad it if you are on chrome :D 2021-02-13 12-59-26 PST Adam Belis gradeint tool is fater than using node tool 2021-02-13 13-02-52 PST Adam Belis i think you just need to learn to use gradeint tool look at my video 2021-02-13 13-00-25 PST Adam Belis look 2021-02-13 13-01-34 PST Adam Belis also you can make nodes bigger in edit/prefereces / intereface handel size 2021-02-13 13-04-00 PST Adam Belis take a gradeint tool click on object to select click and drag to make gradeint 2021-02-13 13-01-10 PST Adam Belis 2021-02-13 22-00-28.mkv (https://chat.inkscape.org/file-upload/xjAanR6CKkCXvn9ju/2021-02-13%2022-00-…) 2021-02-13 13-04-07 PST Adam Belis click on ne object to select and repet 2021-02-13 13-04-19 PST Adam Belis its much faster than using node editing tool 2021-02-13 13-05-00 PST Adam Belis its totaly same as with node editing tool 2021-02-13 13-05-53 PST Adam Belis change cousor look ? 2021-02-13 13-06-31 PST Adam Belis but you can dowlad 1.1 2021-02-13 13-06-40 PST Adam Belis but what is prolbem for you 2021-02-13 13-06-50 PST Adam Belis you feel like cousros is just in a way ? 2021-02-13 13-10-16 PST Adam Belis well everry tool has a icon it is usful to knwo wnat tool are you using but i get why it is annoing for you 2021-02-13 13-10-48 PST Adam Belis i would argure that node tool is more enoing coz you see nodes and storkes and other usles information you dont need when you edit gradeints 2021-02-13 13-11-03 PST Adam Belis well anyway yes you can edit coursotsr in 1.1 2021-02-13 13-11-08 PST Adam Belis and make it just a cross 2021-02-13 13-14-24 PST Adam Belis hehe stil thinks gradeint tool is better tool for the job but you do you 2021-02-13 13-14-35 PST Adam Belis prefences interface 2021-02-13 13-14-39 PST Adam Belis node size slider 2021-02-13 13-19-29 PST Adam Belis well you could do that but it sounds lik a bad idea :D 2021-02-13 14-00-25 PST Adam Belis hehe good luck wit this many etempts you wil finish this piece soon :D 2021-02-13 14-00-54 PST Adam Belis good strategy to be more productive 2021-02-13 14-02-19 PST Adam Belis hehe waiting for technology to catch up :D 2021-02-13 14-42-55 PST Adam Belis even when you wich to node tool now ? 2021-02-13 14-43-18 PST Adam Belis heh i stillthink this would be much faster with gradient tool :D 2021-02-13 14-43-33 PST Adam Belis 2 clicks insted of 4 2021-02-13 14-45-15 PST Adam Belis 3 click pricez clicks 2021-02-13 14-45-44 PST Adam Belis you dont need to find handel you can start click and drag 2021-02-13 14-46-30 PST Adam Belis with gradient tool have to locate handels 2021-02-13 14-46-37 PST Adam Belis you can just click and drag 2021-02-13 14-47-31 PST Adam Belis yop look at that video i send you 2021-02-13 14-47-54 PST Adam Belis you can also seltec with gradeint tool so its pretty fast 2021-02-13 14-48-52 PST Adam Belis less clicks more stonks 2021-02-13 14-49-59 PST Adam Belis 2021-02-13 23-49-14.mp4 (https://chat.inkscape.org/file-upload/B2miC8e9t5u4xec4y/2021-02-13%2023-49-…) 2021-02-16 12-11-43 PST Adam Belis I see so this is maybe gradient editor memory leak 2020-05-05 14-55-58 PDT Adam Belis Clipboard - May 5, 2020 11:55 PM (https://chat.inkscape.org/file-upload/ddFeBibqTBqAo8PRH/Clipboard%20-%20May…) 2021-02-13 11-24-36 PST Adam Belis but is it releted to time 2021-02-13 11-24-25 PST Adam Belis that is probabyt som kind of memory leak ... 2021-02-13 11-20-49 PST Adam Belis how many steps do you have to do until it starts to get laaggy 2020-05-05 14-55-05 PDT Adam Belis i would say kirta but yes :D 2020-05-05 14-53-06 PDT Adam Belis illustrator_w73RN9uVrJ.png (https://chat.inkscape.org/file-upload/RkGfQ9TJhn6smcswA/illustrator_w73RN9u…) 2020-05-05 14-57-08 PDT Adam Belis Inkscape brain washed me i am going BACK :D 2020-05-05 14-56-22 PDT Adam Belis men i forgot how good illustrator is :D 2020-05-05 14-44-45 PDT Adam Belis i added 200 more gradients to svg (but did not aply ) and it still runs same 2021-02-13 12-58-14 PST Adam Belis dont know i susaly ise obs for longer videos 2021-02-13 12-55-51 PST Adam Belis but i dont see big degration in performace in this video 2021-02-13 12-55-31 PST Adam Belis i get much worst performace than yors 2021-02-13 12-55-00 PST Adam Belis ok i have to say your machin is much faster than mine :D 2021-02-13 12-54-27 PST Adam Belis you are on linux right ? 2021-02-13 12-51-58 PST Adam Belis ok that does nto work :D 2021-02-13 12-50-39 PST Adam Belis hmmmm you know what yoou could try ? 2021-02-13 12-33-11 PST Adam Belis add it to the issue 2021-02-13 12-33-05 PST Adam Belis youtube is probably better 2021-02-13 12-23-00 PST Adam Belis hmmm just testing performace is not good but i dont feel liek its getting worst with time :/

1 0

[Webmaster] Rocket.Chat, 1 Users, 2 Messages, 0 Files, 738749 Minutes, in Direct Message Between: faith & jabiertxof
by no-reply＠chat.inkscape.org 29 Apr '21

29 Apr '21

2019-12-02 15-31-37 PST faith hi 2019-12-02 15-32-20 PST faith hello

1 0

[Webmaster] Rocket.Chat, 2 Users, 20 Messages, 0 Files, 615052 Minutes, in Direct Message Between: cyanideforbreakfast & jabiertxof
by no-reply＠chat.inkscape.org 29 Apr '21

29 Apr '21

2020-03-09 13-15-57 PDT Jabier Arraiza Please share in inkscape devel I disagree the way. To me you must handle groups when posibol 2020-03-09 13-18-34 PDT Jabier Arraiza Also you need to add two patches to apply your proposal 2020-02-27 22-03-15 PST Jabier Arraiza Thanks I try to help you as co-mentor 2020-02-27 13-17-02 PST Jabier Arraiza I couldent mentor you, sorry, I launch a public call to help you 2020-03-09 13-22-45 PDT Jabier Arraiza Great, please use devel chat, I want to be a co- mentor I haven't time to full mentor 2020-03-09 13-21-01 PDT Jabier Arraiza Both are great filled 2020-03-09 13-20-01 PDT Jabier Arraiza Also I think you must hide path on editing some effects can wrong you if not 2020-03-09 13-20-45 PDT Jabier Arraiza Please look around the other 2 current proposals to take as way to do 2020-02-26 14-21-17 PST Jabier Arraiza Is late reply you tomorrow 2020-02-26 13-24-26 PST CyanideForBreakfast Thanks in advance, sir! 2020-03-09 06-59-23 PDT CyanideForBreakfast https://gitlab.com/CyanideForBreakfast/text_support_lpe/-/blob/master/READM… 2020-02-26 13-18-23 PST CyanideForBreakfast Sure, sir, I would also love to work on Adding Text and Image Support to LPE too. I says I must have experience managing bitmaps. Please tell me how should I start studying them. 2020-02-26 13-23-42 PST CyanideForBreakfast And sir, I did not quiet understood you in chat, sorry. Can you clarify if you will be mentoring Adding Images and Text Support to LPE project? 2020-02-26 13-18-17 PST CyanideForBreakfast Thanks for replying, sir. I thought I would message you here so that I don't disturb the development discussions there. 2020-03-09 06-59-16 PDT CyanideForBreakfast Sir, sorry I was busy in my exams, here is my plan based on what we discussed for extending text support to LPEs. I have a few suggestions listed at the bottom. Please tell me what do you think and feel free to correct me and advise more changes. 2020-02-26 13-19-02 PST CyanideForBreakfast And finally how should I prepare myself for this project? 2020-03-09 13-21-18 PDT CyanideForBreakfast Thanks for the feedback. I will work on it. 2020-02-27 13-34-40 PST CyanideForBreakfast No problem, sir. 2020-02-27 12-05-18 PST CyanideForBreakfast Whenever u r free, sir. 2020-03-09 13-17-17 PDT CyanideForBreakfast Sure.

1 0

[Webmaster] Rocket.Chat, 2 Users, 3 Messages, 0 Files, 197964 Minutes, in Direct Message Between: ian & jabiertxof
by no-reply＠chat.inkscape.org 29 Apr '21

29 Apr '21

2020-12-12 04-40-55 PST Jabier Arraiza we can use team ux? so other others can contrib? 2020-12-12 04-36-31 PST ian test 2020-12-12 04-42-01 PST ian good idea

1 0

[Webmaster] Rocket.Chat, 2 Users, 4 Messages, 0 Files, 204831 Minutes, in #private
by no-reply＠chat.inkscape.org 29 Apr '21

29 Apr '21

2020-12-07 10-13-00 PST Izumi Midoriya :wave: 2020-12-07 11-33-15 PST Izumi Midoriya me is got 50+ followers 2020-12-07 12-05-32 PST 💖Dera💖 !!! 2020-12-07 10-32-25 PST 💖Dera💖 hi

1 0

[Webmaster] Rocket.Chat, 2 Users, 46 Messages, 0 Files, 858776 Minutes, in Direct Message Between: brynn & jabiertxof
by no-reply＠chat.inkscape.org 29 Apr '21

29 Apr '21

2020-01-24 17-01-36 PST Jabier Arraiza maybe the easyest is work the files localy as static HTML files and when done I send tou the comand to upload, but you need to have acces to alpha as vector memeber (so you can edit the real home page of the whole site for the future) 2020-01-26 06-32-05 PST Jabier Arraiza We want to focus on finish 1.0, no forums work before 2020-01-24 16-30-38 PST Jabier Arraiza the problem is we dont use php in any server, just HTML or python 2020-01-26 03-45-04 PST Jabier Arraiza I don't know 2020-01-24 17-08-57 PST Jabier Arraiza We have a copy from your site on alpha 2019-09-10 08-27-44 PDT Jabier Arraiza great! 2020-01-24 17-14-32 PST Jabier Arraiza Scp ./myfile brynn@alpha.inkscape.org:/place/of/file.html 2020-01-24 17-13-07 PST Jabier Arraiza Yes basically is: 2020-01-26 03-45-23 PST Jabier Arraiza but not devs/staff to it previously 2020-01-26 06-42-36 PST Jabier Arraiza but I can change previosly sometimes since we final decide ;) 2020-01-25 07-14-58 PST Jabier Arraiza I think make pubic is a good idea, you are hurry or could wait 1.0 launch and see how advance The 2 static forums launch, to know what's the best way to update yours one front page? 2020-01-24 16-39-29 PST Jabier Arraiza so you can enter by ssh and edit with a comand line text file editor 2020-01-24 17-10-27 PST Jabier Arraiza So you can edit this 2020-01-24 17-15-46 PST Jabier Arraiza You can upload recursive with -r 2019-09-10 08-27-38 PDT Jabier Arraiza grear!!! see you! 2020-01-26 06-31-36 PST Jabier Arraiza I dont know when release 2020-01-24 17-16-48 PST Jabier Arraiza Yes but I need to know how to do a scp with putty 2020-01-24 16-38-52 PST Jabier Arraiza think we can add you permissions on alpha page 2020-01-24 17-18-34 PST Jabier Arraiza Yes of course 2020-01-24 17-18-09 PST Jabier Arraiza If possible you need to ask Bryce to give you acces to server and some folders I tell you later 2020-01-24 16-40-43 PST Jabier Arraiza but feel free to ask on public 2020-01-24 16-39-50 PST Jabier Arraiza also can upload files from outside or copied by SCP 2020-01-24 17-11-07 PST Jabier Arraiza No ;) 2019-09-10 08-05-22 PDT Jabier Arraiza Hi @brynn ping me if want to leave moderation from RC. Regards 2020-01-24 17-16-04 PST Jabier Arraiza But you are on windows 2020-01-24 17-52-43 PST Jabier Arraiza You have a domain? 2020-01-24 17-15-14 PST Jabier Arraiza Secure copy protocol 2020-01-24 17-11-34 PST Jabier Arraiza Alpha.inkscape.org 2020-01-24 17-09-43 PST Jabier Arraiza When shutdown we still have it available in read mode 2020-01-24 16-40-19 PST Jabier Arraiza think give FTP acces could be a problem because exception 2020-01-24 17-15-56 PST brynn Oh, I've never seen that page before (alpha.inkscape). So I would need....what do I need? Permission to upload to that page? 2020-01-24 03-35-45 PST brynn @jabiertxof I wanted to move this page https://forum.inkscapecommunity.com/index.php so it stays alive after Inkscape Community is closed. I thought my ISP would provide a little space, enough for that page. But I just found out they don't give me any space. A little while ago you asked me if I wanted to put any part of Inkscape Community on Inkscape server. Would there be some way to do that, where I would still have access to it, so I could keep the page updated? 2020-01-24 17-10-39 PST brynn Oh, I thought you meant inkscape.org. Sorry. 2020-01-24 17-17-59 PST brynn Instead of making me all official, could I just send you the files? 2020-01-26 06-41-55 PST brynn Ok. Thanks. 2020-01-24 17-17-23 PST brynn Well I would need a terminal to put the command in. Oh, I have putty. I needed it once, but never used it again. 2020-01-25 22-01-39 PST brynn If 1.0 launch is less than one month, I can wait. But I can't wait 2, 4, 6, months. Why does it matter about the 2 archive forums launch? 2020-01-24 17-22-19 PST brynn It sounds like it's going to be complicated to make me official enough. Let me do a little searching, and find out if maybe I can find a cheap place to host it. If I can't find any other place, I'll come back to you, and see if we can make it work. OK? 2020-01-24 17-12-27 PST brynn I thought about that too. I can edit the file myself, and just send it to you, and you can overwrite it on alpha. But giving me command might work. Would it be the same command to upload the image files, as to upload the html file? 2020-01-24 16-38-12 PST brynn It's html page. No php. I take the php out. I have 2 questions. So the page could keep it's graphics (background, custom bullets, custom titles) I would need to be able to upload several small image files. Is that possible? And the other question, would I be able to access the file, so I could update now and then? 2019-09-10 08-10-45 PDT brynn Ok. This is a different moderation system, so I'll still help here. I might not be visiting as much, but we'll see what happens. 2020-01-24 17-16-31 PST brynn Yes, windows 2020-01-24 16-51-14 PST brynn Ok, thanks jabier. Most of that, I don't know how to do (don't even know what scp is). But I wanted to find out if possible. I will have to look somewhere else. Maybe I can use a cheap shared server. I prefer vps, but even the smallest one, probably too expensive. But I'll search. Thanks again! 2020-01-24 18-14-28 PST brynn Hhmm.... Good point. I have 2 domains now (inkscapecommunity.com and inkscapecuttingdesign.com). But I was just about to give them up. SIGH!! Maybe using Inkscape server is the best option. As far as I understand, there are 2 ways to go. 1 - I need to get whatever credentials I need to be able to upload to alpha.inkscape. Or 2 - send you the files and you can upload them. I don't want to make more work for you, even if it's just 15 minutes now and then. So I need to get whatever credentials I need, to be able to upload. Unless! Maybe we need to make the discussion public, so other users of the server can give comments? Maybe there would be other ideas? Maren wants me to put the page on GitLab. I resist that, because I find GL hard to use, and often maddening! So that's the last thing I want to do. But someone might have a good idea? 2020-01-24 17-04-55 PST brynn I don't understand about editing the home page of the whole site. I'm not even sure what the real home page is, or why I need to edit. 2020-01-26 03-45-56 PST brynn I don't understand what you mean.

1 0

[Webmaster] Rocket.Chat, 4 Users, 15 Messages, 0 Files, 453995 Minutes, in #gsoc-moazin
by no-reply＠chat.inkscape.org 29 Apr '21

29 Apr '21

2020-06-17 10-35-57 PDT Mc (but ultimately it should be @speleo3 's decision as he's your main mentor and who should see how "on schedule" you are for now - a few days, if you are on time with the proposed schedule (and not falling behind), is completely doable to recover -) 2020-06-17 11-31-48 PDT Mc (french-speaker comment : "Forme" means "Shape" in french, so the fact that both functions exist is quite amazing :D ) 2020-06-17 10-25-10 PDT Mc :) 2020-06-17 10-33-08 PDT Mc imo taking three days (20-21 is a weekend) to get the end of academic year done with (rather than asking for an extension) is a reasonable ask 2020-06-17 10-26-19 PDT Moazin There is a matter that I need to discuss with you mentors. 2020-06-17 10-28-19 PDT Moazin So the thing is as you would probably know I am in the senior year of my university. (I was supposed to have graduated by June). Due to COVID, the university was closed and then they started some online education system too. The exams and my thesis were scheduled for later. However, suddenly they sent us an email telling that we have to submit our thesis on 24th June and deliver a presentation on 29 June. It's very hard to manage this with GSoC. I was wondering if it would be possible to do reduced work for the upcoming few days, I'll of course make up for it. I totally understand if this is not possible, in that situation I'll have to ask the university to give me an extension in the project which will have its own downsides. 2020-06-17 10-25-24 PDT Moazin Hi Everyone 2020-06-17 11-03-50 PDT Moazin Thanks @speleo3 and @Mc. I am really grateful that you guys are very helpful and supportive. :-) I'll try my best to get done with understanding `Shape::ConvertToShape` and `Shape::ConvertToForme` within the next 3 days and then get started on the thesis. Hopefully when I get back to coding after 25th I'll be ready to start coding these. 2020-06-17 10-28-46 PDT Moazin I was thinking of working as much as possible for the next few days and taking time off from 20 to 25 June. 2020-06-18 00-14-12 PDT Moazin Interestingly, both of them do the opposite job. One is path -> digraph and the other one is digraph -> path :D 2020-06-17 10-29-16 PDT Moazin Do you guys think it'd be possible? 2020-06-18 00-16-25 PDT Moazin I have learned some other words too. bord -> edge, batard -> bastard, aretes -> edges 2020-06-17 10-31-50 PDT Moazin A brief update on the project: I finished the work with Path Simplification (which was the goal for the first two weeks) and am working on understanding the Path -> Digraph -> Path part. 2020-06-17 10-59-47 PDT Thomas Holder @moazin I think your thesis should have highest priority. Your progress looks great so far, taking a week off to work on the thesis is perfectly fine with me. 2020-06-17 12-04-23 PDT Patrick Ha, next-level overloads :-D

1 0

[Webmaster] Rocket.Chat, 2 Users, 2 Messages, 0 Files, 190425 Minutes, in #idk
by no-reply＠chat.inkscape.org 29 Apr '21

29 Apr '21

2020-12-17 10-15-43 PST Izumi Midoriya hello 2021-01-04 12-09-47 PST Moini Private Group (room_changed_privacy)

1 0

[Webmaster] Rocket.Chat, 3 Users, 12 Messages, 0 Files, 202997 Minutes, in #girlsclub
by no-reply＠chat.inkscape.org 29 Apr '21

29 Apr '21

2020-12-08 16-45-45 PST 💖Dera💖 hello. 2020-12-08 16-50-20 PST 💖Dera💖 ok i'm back 2020-12-08 16-46-46 PST 💖Dera💖 If you join i am afk for rn 2020-12-08 16-43-34 PST 💖Dera💖 Room name changed to: girlsclub by Dera 2021-01-04 12-09-23 PST Moini Private Group (room_changed_privacy) 2020-12-09 16-01-17 PST 💖Dera💖 no_quiz was set owner by Dera 2020-12-09 16-01-30 PST 💖Dera💖 no_quiz was set moderator by Dera 2020-12-09 16-01-05 PST 💖Dera💖 no_quiz was set leader by Dera 2020-12-09 16-01-26 PST 💖Dera💖 no_quiz is no longer leader by Dera 2020-12-09 16-01-41 PST 💖Dera💖 no_quiz is no longer moderator by Dera 2020-12-09 16-01-23 PST 💖Dera💖 no_quiz is no longer owner by Dera 2020-12-08 18-47-08 PST NO_QUIZ Has joined the channel.

1 0