- Inkscape Devel - Inkscape Mailman

Removal of GTK+ 2 support in Inkscape trunk
by Alex Valavanis 29 Jul '16

29 Jul '16

Summary: Removal of GTK+ 2 support in Inkscape trunk is proposed for w/c 2016-08-01. Comments and questions are very welcome. Dear All, We are planning to remove support for GTK+ 2 in Inkscape trunk. A full statement of the reasons and the implementation plans is given on this wiki page: http://wiki.inkscape.org/wiki/index.php/Notice_of_removal_of_GTK%2B_2_suppo… Please note that under this proposal, the forthcoming Inkscape 0.92 release *will* still use GTK+ 2, but all future releases will require GTK+ 3. As of now, development of the forthcoming Inkscape 0.92 release has been moved to the new lp:inkscape/0.92.x branch on Launchpad. You can grab a copy using: bzr branch lp:inkscape/0.92.x Please prioritise your efforts here on fixing any remaining "blocker" bugs, as listed at: https://bugs.launchpad.net/inkscape/+bugs?field.tag=blocker The main Inkscape Trunk branch (lp:inkscape) will, from now on, be used for future releases (>= 0.93). If you wish to work on the code here, you will need to have the GTK+ 3 development libraries (and GTKmm, GDK+ 3 etc) available on your system. This is a major change, and the migration will inevitably cause some difficulties. However, the consensus among active developers is that the current situation of supporting both GTK+ 2 and GTK+ 3 is unmanageable. I am proposing that we implement the GTK+ 3 dependency in trunk next week (w/c 1 August, 2016). Any comments or questions are very welcome before we go ahead. Best wishes, Alex

3 4

0.92 release branch
by Krzysztof Kosiński 25 Jul '16

25 Jul '16

Hello everyone, I made a branch for the 0.92 release under lp:inkscape/0.92.x. Currently the only change in this branch is the reversion of the SPCanvas widget changes that were causing performance regressions on some platforms. After 0.92, the following large changes are expected: - C++11 mode will be enabled. C++98 compilers will no longer be supported. - Autotools and btool build systems will be removed in favor of CMake. - Inkscape will be based on GTK3. GTK2 support will be removed. - At some point, code will be migrated to GitHub, to take advantage of automatic continuous integration with TravisCI. The bug tracker and answer tracker is expected to remain on Launchpad for the foreseeable future. Best regards, Krzysztof

3 2

Building on Windows Subsystem for Linux (WSL)
by Alex Valavanis 23 Jul '16

23 Jul '16

Hi All, Thought you might be interested to know that I've successfully built and run Inkscape on the new Windows Subsystem for Linux (WSL) in Windows 10 Insider Preview. This is a real boost to my workflow and I'd recommend it to anyone else who likes to develop on Linux, but uses Windows for their day job. It's pretty easy... just install WSL [1] and then you'll have a native Ubuntu shell that you can use on your Windows desktop. You can then set up a Linux build in the shell as normal. Note that you'll also need to install XMing if you want to run the Inkscape GUI. AV [1] http://www.howtogeek.com/249966/how-to-install-and-use-the-linux-bash-shell…

4 3

String Freeze and POTFILES.skip
by Jabiertxo Arraiza Cenoz 23 Jul '16

23 Jul '16

Hi to all, cleaning some things, I notice I dont update the entryes on POTFILES.skip when put outside experimental LPE this two files, both have string translations: src/live_effects/lpe-mirror_symmetry.cpp src/live_effects/lpe-copy_rotate.cpp Sorry for the inconvenience, ping me if I be required to do something. Cheers, Jabier.

1 0

Link properties dialogue missing on pre-build for OSX
by ugajin 23 Jul '16

23 Jul '16

Recently, I needed to include an anchor element in a document that was being authored using Inkscape. The difficulty after creating the link wrapper, was locating the Link Properties dialogue. In fact, I am unable to find it, and I do not believe I have it. I have the contextual menu option on right clicking on the anchor element, but no dialogue. :( Q1. Is this behaviour particular to pre-build OS X versions of Inkscape, only? Q2. Should I report this as a bug? Thanks. -u

1 0

X and Y on FeImage
by Jabier Arraiza 21 Jul '16

21 Jul '16

Hi to all, I just open this bug+patch https://bugs.launchpad.net/inksca pe/+bug/1605334 It add the feature, because the string freeze it only have _("X") and _("Y") strings. If correctlyy tested, ¿It can go on trunk? Cheers, Jabier.

1 0

Request for Comments on an Idea - Rendering Tests
by Shlomi Fish 19 Jul '16

19 Jul '16

Hi all! Do you think it would be a good idea to make Inkscape's test suite more comprehensive by making sure some (= as many as we can) input SVGs result in the same bitmap images after being rendered by --export-png? It won't be too hard to implement, and may prevent regressions. Regards, Shlomi Fish -- ----------------------------------------------------------------- Shlomi Fish http://www.shlomifish.org/ Humanity - Parody of Modern Life - http://shlom.in/humanity <ew73> VB.NET is all of the fun of enforced privacy OO with all of the power of BASIC. — Freenode’s #perl Please reply to list if it's a mailing list post - http://shlom.in/reply .

4 6

Windows build new (for me) warnings
by mathog 19 Jul '16

19 Jul '16

Hi all, I have not built Inkscape on Windows in a while, so today updated devlibs and Inkscape, tossed the build directory, and ran btool. It is running along OK at the moment, but several of these have gone by: STDERR: In file included from c:\progs\devlibs63/include/boost/ptr_container/ptr_map_adapter.hpp:19:0, from c:\progs\devlibs63/include/boost/ptr_container/ptr_map.hpp:20, from src/ui/tools/node-tool.h:14, from src/selection-chemistry.cpp:117: c:\progs\devlibs63/include/boost/ptr_container/detail/map_iterator.hpp:52:48: warning: type qualifiers ignored on function return type [-Wignored-qualifiers] What is causing these? Is this something being picky, or a real problem? Also, the Windows build page now says that cmake is the tool of choice and that btool is deprecated. Does it make any difference which version of cmake is used? Thanks, David Mathog mathog@...1176... Manager, Sequence Analysis Facility, Biology Division, Caltech

3 2

Fw: CMake now working on Windows
by Shlomi Fish 17 Jul '16

17 Jul '16

Forwarding another message. Begin forwarded message: Date: Fri, 8 Jul 2016 19:08:06 +0200 From: Sebastian Faubel <sebastian@...3248...> To: Shlomi Fish <shlomif@...2985...> Subject: Re: [Inkscape-devel] CMake now working on Windows Hi guys, figured out that it was my anti-virus blocking the creation of the file. The attached patch actually works in a different directory. It provides the inkscape.com binary and the missing license texts in the install directory. The build output should now be feature-equal to btool. ~seb *Semiodesk GmbH | *Werner-von-Siemens-Str. 6 Geb. 15k, 86159 Augsburg, Germany | Phone: +49 821 8854401 | Fax: +49 821 8854410 | www.semiodesk.com This e-mail message may contain confidential or legally privileged information and is intended only for the use of the intended recipient(s). Any unauthorized disclosure, dissemination, distribution, copying or the taking of any action in reliance on the information herein is prohibited. E-mails are not secure and cannot be guaranteed to be error free as they can be intercepted, amended, or contain viruses. Anyone who communicates with us by e-mail is deemed to have accepted these risks. Semiodesk GmbH is not responsible for errors or omissions in this message and denies any responsibility for any damage arising from the use of e-mail. Any opinion and other statement contained in this message and any attachment are solely those of the author and do not necessarily represent those of the company. 2016-07-08 18:38 GMT+02:00 Sebastian Faubel <sebastian@...3248...>: > Hi guys, > > i just added the Windows console binary and the missing license text files > to the CMake config. However, it fails to install inkscape.com because > it's being renamed. I'll have a look at that next week. > > ~seb > > *Semiodesk GmbH | *Werner-von-Siemens-Str. 6 Geb. 15k, 86159 Augsburg, > Germany | Phone: +49 821 8854401 | Fax: +49 821 8854410 | > www.semiodesk.com > > > This e-mail message may contain confidential or legally privileged > information and is intended only for the use of the intended recipient(s). > Any unauthorized disclosure, dissemination, distribution, copying or the > taking of any action in reliance on the information herein is prohibited. > E-mails are not secure and cannot be guaranteed to be error free as they > can be intercepted, amended, or contain viruses. Anyone who communicates > with us by e-mail is deemed to have accepted these risks. Semiodesk GmbH is > not responsible for errors or omissions in this message and denies any > responsibility for any damage arising from the use of e-mail. Any opinion > and other statement contained in this message and any attachment are solely > those of the author and do not necessarily represent those of the company. > > 2016-07-08 11:52 GMT+02:00 Shlomi Fish <shlomif@...2985...>: > >> On Thu, 7 Jul 2016 10:22:11 -0700 >> Bryce Harrington <bryce@...961...> wrote: >> >> > On Thu, Jul 07, 2016 at 09:14:34AM +0200, Sebastian Faubel wrote: >> > > Hello everybody, >> > > >> > > I submitted a merge request of my Inkscape branch yesterday. Thanks >> to Marc >> > > it has already found its way into trunk - big thank you for the quick >> > > review. >> > > >> > > The branch I submitted now has full support for compiling Inkscape on >> > > Windows with 32-Bit and 64-Bit environments. It also supports out of >> source >> > > builds and should also work with Unix llike command lines such as >> Cygwin >> > > and MSYS. After weeks of investigation I managed to get locales to >> work and >> > > have an executable icon along with all application icons. >> > >> > Excellent work, an important step forward. >> > >> >> I agree - that's very good news. Thanks for that! >> >> Regards, >> >> Shlomi Fish >> >> -- >> ----------------------------------------------------------------- >> Shlomi Fish http://www.shlomifish.org/ >> http://www.shlomifish.org/humour/Summerschool-at-the-NSA/ >> >> What is is. Perceive It. Integrate it. Act on it. Idealize it. >> — Leonard Peikoff >> >> Please reply to list if it's a mailing list post - http://shlom.in/reply >> . >> > >

3 2

Filters
by Jabiertxo Arraiza Cenoz 17 Jul '16

17 Jul '16

Hi to all, playing with filters I notice usualy filters apply a 1.20 scale to the area of the effect with a negative ofset to center it. This is good for some filters but not for all, if I change it to 1.0 in a element, the effected element loose his bounding box in the stroke part -geometric bounds- is posibol to fix it to visual bounds or is a problem with the SVG spec? Cheers, Jabier. PD. Thanks to the person fix the linked image filter!

2 2

Re: [Inkscape-devel] Filters
by Ivan Louette 17 Jul '16

17 Jul '16

Hi Jabier, When I play with filters I always use geometrical bounding box because of that. I don't know if this is really an svg spec. The filters need often a lot of room to develop their effects. I tried to give each one the most convenient space around. Sometimes it's fairly large ! I hope that can help,ivan Le Dimanche 17 juillet 2016 14h04, Jabiertxo Arraiza Cenoz <jabier.arraiza@...2893...> a écrit : Hi to all, playing with filters I notice usualy filters apply a 1.20 scale to the area of the effect with a negative ofset to center it. This is good for some filters but not for all, if I change it to 1.0 in a element, the effected element loose his bounding box in the stroke part -geometric bounds- is posibol to fix it to visual bounds or is a problem with the SVG spec? Cheers, Jabier. PD. Thanks to the person fix the linked image filter! ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports.http://sdm.link/zohodev2dev _______________________________________________ Inkscape-devel mailing list Inkscape-devel(a)lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel

2 2

Creating CSS Dialog
by Kamalpreet Grewal 12 Jul '16

12 Jul '16

Hi As double clicking any selector should open up the CSS dialog, I am trying to open CSS dialog in the _buttonEventsSelectObjs for GDK_2BUTTON_PRESS. I have registered the CSS dialog correctly. Calling the constructor of CSS dialog does not open it. Therefore, I am calling it as: _desktop->_dlg_mgr->showDialog("CssDialog"); // dialog opens Looks like verb associated with the dialog has to be used so that it shows up on double click. If this is the only case, how can I pass the data (CSS properties) between Style Dialog and CSS Dialog? -- Kamalpreet Kaur Grewal Blog: http://kamalpreetgrewal.com/

2 2

Reminder End of Survey: Relevance of Configuration Systems in Free and Open Source Software
by Gabriel Rauter 11 Jul '16

11 Jul '16

I would like to gently remind anyone interested that the survey will be closed on 18.07.2016. As stated in the previous mailing we are interested in the experience and opinion of people involved in both FLOSS and configuration systems. This includes developers who use or have used configuration related artefacts in their contributions. e.g. also accessing and using environment variables for configuration. http://elektra.limequery.org/625192 As concern of my credibility where raised on two mailing lists I would like to be clearer in this regard. For concerns regarding using a gmail address: I barely use my university email, only when explicitly needed. Why? Because it is a temporary mail address. Once I finished my studies it will be deactivated. Also I use my gmail address for contributions. If you still have any concerns feel free to contact me at e1026292 at tuwien ac at or check my github profile https://github.com/sirblackheart. As for concerns regarding the Elektra Initiative itself you can see its members at https://github.com/ElektraInitiative. In addition you can see offered thesis at http://www.complang.tuwien.ac.at/cgi-bin/uncgi.cgi/prak_dipl1.cgi?kw=Compil… We also hold regular meetings. If you are living near Vienna and are interested in the topic of configuration systems in FLOSS, feel free to contact us to be added to the mailing list. best regards, Gabriel Rauter ---------- Forwarded message ---------- From: Gabriel Rauter <rauter.gabriel@...400...> Date: 2016-06-14 20:45 GMT+02:00 Subject: Survey: Relevance of Configuration Systems in Free and Open Source Software To: inkscape-devel(a)lists.sourceforge.net Dear developers, contributors and caretakers of free and open source software. If you are involved in the development of free and open source software (FLOSS) you are the person we are looking for. It would be a great help if you take this survey: http://elektra.limequery.org/625192 It will be available till 18.07.2016 (anywhere on earth). For every thoroughly and not anonymously finished survey € 40 cent will be donated to one of the following organizations of your choice: For every thoroughly and not anonymously finished survey € 40 (at least € 200 in total) cent will be donated. The donation goes to one organisation of your choice. You need to enter your e-mail address to participate. Then you can select between following projects: - LimeSurvey (LimeService, kindly hosts this survey) - SPI (General Donation: 0 A.D., LibreOffice, Debian, ArchLinux, …) - FSFE - GNOME - KDE - Mozilla (Firefox) - Wikimedia Foundation (Wikipedia) So if you know anyone suited for this survey please feel free to share it. As part of the ongoing research on the topic of configuration systems in free and open source software here at Vienna University of Technology, we would like to invite you to participate in this short survey. It should only take you 15 minutes, promised! By supporting us through this survey, you help the research by providing relevant input on this topic. In addition the anonymised results will be released under an open licence, so other projects with involvement in configuration in free and open source software can benefit from it too. In addition the results will be anonymised and made freely available. Just leave your address at the end of the survey and we will send it to you. For further questions regarding this survey or interest in the research of configuration systems feel free to contact as atsurvey@...3407... If you have not done it yet, we would appreciate if you take our survey at http://elektra.limequery.org/625192 before the 18.07.2016.

1 0

New font editing branch
by Tavmjong Bah 10 Jul '16

10 Jul '16

Hi, I had reason to do a little font design using Inkscape recently and found a few pain points... which I have fixed. As we are in string freeze, I pushed the changes to a new branch which can be found at: bzr branch lp:~inkscape.dev/inkscape/font_editing In particular I changed the font editing dialog: 1. Allowed for fonts with other than 1000 units per em. 2. Allowed setting 'ascent', 'descent', etc. 3. Allowed setting individual glyph horizontal advances. 4. Fixed bug where 'units-per-em' was not read correctly. Feed back most welcome. Tav

2 1

Account request on the wiki
by Sylvain Chiron 10 Jul '16

10 Jul '16

Hello all, I'm a quite new (several months have gone now…) French translator for the project, stealing progressively all the translation tasks to Mr jazzynico. I also work a little on the website project. I would like to get an account on the wiki, to be able to write glossary info for French as a first reason, because such a glossary would be very useful to other translators and I like to share the core nodes of my work. Other reasons would be trying to update/improve pages or correct their little mistakes, as I can't bear working with mistakes, obsolescence and non-compliance without attempting to correct them (I love the wiki system for that). Please set Frigory as my username. Thank you; regards, -- Sylvain Chiron

3 3

Progress on Style Dialog
by Kamalpreet Grewal 10 Jul '16

10 Jul '16

Hello all I will update you all about the progress done in extending CSS support creating Style Dialog. I have been updating my mentor Tavmjong Bah frequently. As mentioned here: http://wiki.inkscape.org/wiki/index.php/Style_Editor about functionality to be added, following has been added: 1. Clicking on selector 2. Double clicking on selector 3. Click on object 4. Clicking on '+' in front of selector 5. Clicking on 'x' in front of object 6. Clicking on '+' at bottom 7. Clicking on 'x' at bottom Some issues are there yet and will be resolved soon. -- Kamalpreet Kaur Grewal Blog: http://kamalpreetgrewal.com/

1 0

arcs in the path editor
by Daniel Bailey 09 Jul '16

09 Jul '16

Hi again, After some procrastination, I have found time to fix some issues with the arc editor feature I proposed a while ago. (See here: https://sourceforge.net/p/inkscape/mailman/message/31695400/) I have uploaded my latest changes to launchpad. https://code.launchpad.net/~danieljabailey/inkscape/arc_node_editor The new changes allow you to convert an arc to a bezier curve (simply by using the "make selected segments curve" button). I have also fixed the bug that was pointed out to me, which meant that an arc at the end of a path would sometimes become a straight line. I am facing one more issue however, when converting an arc to a bezier, some arcs cause a segfault. The easiest way to reproduce this is to convert a circle to a path and then try to convert the resulting arcs to beziers. (Arc to bezier conversion being the feature I recently added.) I seem to get the segfault on a line that sets the position of a bezier handle. This is in a function I have added, "PathManipulator::replaceSegmentWithPath". Sometimes this works and sometimes it doesn't. Valgrind and gdb have, surprisingly, not been particularly helpful. Any advice would be much appreciated, I'm not sure if I am re-implementing things that already exist by adding the replaceSegmentWithPath function. Perhaps there is already some code for this which I can use. Thanks, Dan.

2 1

Fw: CMake now working on Windows
by Shlomi Fish 08 Jul '16

08 Jul '16

Message sent in private by accident... Begin forwarded message: Date: Fri, 8 Jul 2016 18:38:40 +0200 From: Sebastian Faubel <sebastian@...3248...> To: Shlomi Fish <shlomif@...2985...> Subject: Re: [Inkscape-devel] CMake now working on Windows Hi guys, i just added the Windows console binary and the missing license text files to the CMake config. However, it fails to install inkscape.com because it's being renamed. I'll have a look at that next week. ~seb *Semiodesk GmbH | *Werner-von-Siemens-Str. 6 Geb. 15k, 86159 Augsburg, Germany | Phone: +49 821 8854401 | Fax: +49 821 8854410 | www.semiodesk.com This e-mail message may contain confidential or legally privileged information and is intended only for the use of the intended recipient(s). Any unauthorized disclosure, dissemination, distribution, copying or the taking of any action in reliance on the information herein is prohibited. E-mails are not secure and cannot be guaranteed to be error free as they can be intercepted, amended, or contain viruses. Anyone who communicates with us by e-mail is deemed to have accepted these risks. Semiodesk GmbH is not responsible for errors or omissions in this message and denies any responsibility for any damage arising from the use of e-mail. Any opinion and other statement contained in this message and any attachment are solely those of the author and do not necessarily represent those of the company. 2016-07-08 11:52 GMT+02:00 Shlomi Fish <shlomif@...2985...>: > On Thu, 7 Jul 2016 10:22:11 -0700 > Bryce Harrington <bryce@...961...> wrote: > > > On Thu, Jul 07, 2016 at 09:14:34AM +0200, Sebastian Faubel wrote: > > > Hello everybody, > > > > > > I submitted a merge request of my Inkscape branch yesterday. Thanks to > Marc > > > it has already found its way into trunk - big thank you for the quick > > > review. > > > > > > The branch I submitted now has full support for compiling Inkscape on > > > Windows with 32-Bit and 64-Bit environments. It also supports out of > source > > > builds and should also work with Unix llike command lines such as > Cygwin > > > and MSYS. After weeks of investigation I managed to get locales to > work and > > > have an executable icon along with all application icons. > > > > Excellent work, an important step forward. > > > > I agree - that's very good news. Thanks for that! > > Regards, > > Shlomi Fish > > -- > ----------------------------------------------------------------- > Shlomi Fish http://www.shlomifish.org/ > http://www.shlomifish.org/humour/Summerschool-at-the-NSA/ > > What is is. Perceive It. Integrate it. Act on it. Idealize it. > — Leonard Peikoff > > Please reply to list if it's a mailing list post - http://shlom.in/reply . > -- ----------------------------------------------------------------- Shlomi Fish http://www.shlomifish.org/ Funny Anti-Terrorism Story - http://shlom.in/enemy I thought I was wrong once, but I was mistaken. — Via Dave Mitchell Please reply to list if it's a mailing list post - http://shlom.in/reply .

1 0

bug 172063, "change the color of the Pen helper path" proposal
by Jabiertxo Arraiza Cenoz 06 Jul '16

06 Jul '16

Hi to all. >From time ago we have in pen/cil handles a hack to make them more visible over items with the same color. I do some tweaks to make it a bit lighther and to use the same effect in lines and handle points. Comment #20 The question, is a good idea apply it to 0.92? If not, I sugest comment the code on current handles highlight. Also in the same bug, I do 2 XOR proposals but they are in early stage and pending to know if XOR affect too much in performance, actual XOR parts are more static than a helper line that can be fast moved. Thanks in advance for our opinion, cheers, Jabier. https://bugs.launchpad.net/inkscape/+bug/172063

1 0

Board meeting July 8th
by Bryce Harrington 05 Jul '16

05 Jul '16

Hope everyone's summer is going well. I'd like to call the next board meeting for this Friday, July 8th. As usual, it will be held in #inkscape-devel at noon Pacific time. http://wiki.inkscape.org/wiki/index.php/Board_Meetings We'll continue discussions about the forum. As well, we had a number of action items at May's meeting that we didn't cover in June's meeting, that I hope we can tackle at this meeting too. Thanks, Bryce

1 0

OS Windows: Automating Inkscape
by Udo Weik 05 Jul '16

05 Jul '16

A very first Hello, and many thanks for that awesome app! I'm an "OS Windows guy" and automation maniac, e. g. via AutoHotkey: AutoHotkey https://autohotkey.com / Automation depends on hotkeys, shortcuts and unique identifiable windows (dialogs) with their controls. Ideally, there is an integrated command prompt interface or something comparable available in the app. Concerning automating Inkscape 0.91, I have some first questions: 1. Missing/not unique hotkeys (the [Alt+_] combinations) in (main) menu items Is there a convenient way to add/change those h o t k e y s somewhere? The shortcuts are saved in XML-files, like default.xml. Via Preferences -> Interface -> Keyboard the shortcuts are editable. I found preferences.xml and some folders here %userprofile%\AppData\Roaming\inkscape and the XML-files in my local installation ...share\keys\default.xml BUT exporting shortcuts crashes Inkscape. 2. gdkWindows and AutoHotkey I haven't any chance to access controls inside an gdkWindows via AutoHotkey. That's really a pitty. 3. Integrated command prompt interface or much better an non-modal (modeless) dialog with that interface I'm aware of: 2 Extensions for Programmers: http://wiki.inkscape.org/wiki/index.php/Extension_repository#Extensions_for…: Interactive Python Shell extension? - InkscapeForum.com http://www.inkscapeforum.com/viewtopic.php?t=10722 A Python quick-scripting extension - Sanjay Manohar http://www.smanohar.com/inkscape.php Any additional hints? Many thanks and greetings Udo

1 0

guides... extension update
by ugajin 02 Jul '16

02 Jul '16

The (new) guides... extension now has a tabbed UI, with an added control feature to remove selection target(s) in Target and Vector tab modes. -u

2 2

Board meeting June 3rd
by Bryce Harrington 02 Jul '16

02 Jul '16

Reminder that our June board meeting will be this Friday in #inkscape-devel at noon Pacific time. http://wiki.inkscape.org/wiki/index.php/Board_Meetings Agenda is above. There were a lot of action items out of the May meeting, so please doublecheck on your tasks and come ready to report. There will be an informal 0.92 release meeting after the board meeting (1pm US pacific time). Potential topics include a run through of release critical bugs, the about screen contest, translation work, platform packages of the release candidate, etc. Thanks, Bryce On Sun, May 08, 2016 at 01:22:35PM -0700, Bryce Harrington wrote: > On Tue, May 03, 2016 at 12:34:18PM -0700, Bryce Harrington wrote: > > May's meeting is coming up. It'll be in #inkscape-devel at noon Pacific > > time (2000 UTC). > > > > http://wiki.inkscape.org/wiki/index.php/Board_Meetings > > > > This will be a good opportunity to debrief from the hackfest and > > identify followup actions that the board should work on in coming > > months. > > > > Bryce > > Thanks everyone for attending, that ended up being an impressively > productive meeting. I've gone through the meeting log and pulled out > action items: > > http://wiki.inkscape.org/wiki/index.php/Board_Meetings > > I've penciled in Friday, June 3rd as our next meeting, and jotted in an > agenda to followup on a number of the items we touched on this week. > > Bryce > > ------------------------------------------------------------------------------ > Find and fix application performance issues faster with Applications Manager > Applications Manager provides deep performance insights into multiple tiers of > your business applications. It resolves application problems quickly and > reduces your MTTR. Get your free trial! > https://ad.doubleclick.net/ddm/clk/302982198;130105516;z > _______________________________________________ > Inkscape-board mailing list > Inkscape-board(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/inkscape-board

3 3

Arcs in the path editor.
by unknown＠example.com 01 Jul '16

01 Jul '16

Hi, I've not contributed to inkscape before, this is my first time. I have created a branch which supports editing elliptical arcs in the node editor. I'm new to bazaar (and inexperienced with launchpad) so I think I've done the right thing with a merge request here: https://code.launchpad.net/~danieljabailey/inkscape/arc_node_editor/+merge/… (but thought I'd check by asking on this list.) Is this an interesting feature? If so I can polish it up for merging into the main repo. Thanks. Dan.

8 8

Interesting Robofont features !
by Ivan Louette 01 Jul '16

01 Jul '16

Because I work a lot on fonts, cutting and pasting a lot between Inkscape and FontForge I see many features already present in FF which could be very nice in Inkscape. For example the ability to select handles separately from the node. But here are very sweet new Robofont features which could benefit not only to type drawers : https://vimeo.com/34351633 On the other hand FF visualisation of potential extremas and inflexion point on a curve are extremely useful too. ivan

2 1