- Inkscape Devel - Inkscape Mailman

libXSLT dependency
by Bob Jamison 08 Dec '04

08 Dec '04

I have been asking around if anyone would mind adding libxslt as a dependency for this cycle. So far, I have had no complaints. This would allow not only us but also the average user to write input and output filters. Bryce mentioned that the requirement should not be bleeding edge. So I found this pkg-config file, libxslt.pc, on RH7.3, which seems good enough, so requiring libxslt >=1.0 should be sufficient. Could someone add this dep to configure.ac, if it is OK with everyone? ========= SNIP ============== prefix=/usr exec_prefix=${prefix} libdir=${exec_prefix}/lib includedir=${prefix}/include Name: libxslt Version: 1.0.15 Description: XSLT library version 2. Requires: Libs: -L${libdir} -lxslt -L/usr/lib -lxml2 -lz -lm -lm Cflags: -I${includedir}

3 5

Firefox 1.0 Linux on Gentoo has SVG plugin installed by default!!!!!!!!
by Jon Phillips 08 Dec '04

08 Dec '04

Hello all, I just opened an svg file by accident in Firefox 1.0 just to find that it displayed properly in my browser!!! Upon closer inspection I thought that I had setup svg to display in inkview, but no, I looked in the MozillaFirefox plugin folder and found these: -rw-r--r-- 1 root root 5632 Nov 18 04:20 libmozsvgdec.a -rwxr-xr-x 1 root root 1368 Nov 18 04:20 libmozsvgdec.la -rwxr-xr-x 1 root root 8536 Nov 18 04:20 libmozsvgdec.so Thus, could you all check to see if the Mozilla SVG is provided with your Firefox 1.0 install? I am ecstatic with joy if this is installed by default on all Firefox 1.0 browsers, because that means we now have penetration into the world with SVG. I have just ruled out that I built my Gentoo install of Firefox with SVG, as it is not an option. Thus, the gentoo ebuild builds the SVG plugin by default. Hmmm...if you all could report if you have the SVG plugin on your install, it would be great to know to promote via our website. In the end, we have to consider that our app's usefulness will scale dramatically if SVG is adopted by more user's. As of now we are using more as a meta-format not much unlike Illustrator using AI as a default format for creating illustrations. With viewing of SVG files on the web, so much more will be possible. Jon -- Jon Phillips (NEW) USA PH 510.499.0894 jon@...235... http://www.rejon.org Inkscape (http://inkscape.org) Open Clip Art Library (www.openclipart.org) CVS Book (http://cvsbook.ucsd.edu) Scale Journal (http://scale.ucsd.edu)

4 8

RE: [Inkscape-devel] SVG Linking
by NAGY Endre 08 Dec '04

08 Dec '04

Jon Thanks for responding and apologies for the delay in getting back My initial enquiry concerning linking related to a requirement to be able to edit attributes in the users namespace. See Feature Request No 1070754 and the mail in Inkscape-Devel on the subject "what do you _really_ want". I assumed that "SVG linking" might be able to help because Ch 17 of the SVG spec mentioned that I could use an URI specified by an Xlink to access a program. In retrospect I think I was grasping at a rather short straw. I can only guess at how I thought I was going to open an application in a browser to edit attribute values and then get those values back into the SVG content. As Peter Moulder points out in in his responses to my feature request, what I really need is a user friendly version of the XML editor that I can constrain to a specific set of attributes. My best hope here appears to be to make use of the plugin architecture. Peter suggested that I speak to Ted about this. I need this feature in Inkscape proper rather than a viewer because its all part of my editing process. If you think I'm still confused please feel free to respond Regards Endre -----Original Message----- From: Jon Phillips [mailto:jon@...235...] Sent: Wednesday, 1 December 2004 5:32 AM To: bulia byak Cc: NAGY Endre; inkscape Subject: Re: [Inkscape-devel] SVG Linking On Mon, 2004-11-22 at 19:25 -0500, bulia byak wrote: > > When invoking the example in InternetExplorer, the affect of clicking on the > > ellipse is to bring up W3's web page. > > I have not found a way of achieving this in inkscape. > > What, Inkscape did not show you the web page?! :) > > Seriously, it would be nice to run a browser by clicking a link. In > theory. In practice, Inkscape is not so much of a "user agent" as it > is an SVG creating application. In particular, following link on click > will badly get in the way of editing. Clicking something in Inkscape > has lots of editing functions. So, while we can create links, I think > we can be excused for not following them. > > This of course applies to inkscape proper. For inkview, following > links by calling a browser is a must. I think we already have an RFE > on that; search in the tracker and add your comments. Yes, I have been working on this behind the scenes. There are a few RFE's about linking. We (inkscape developers) have discussed having a preview mode like in Macromedia Flash whereby any animations/scripting/linking can be tested. Yes, Inkview should be a runtime/player of SVG content. And, yes, linking should work the way you are describing. My understanding of the spec though would allow you to in Inkview click on a link and if it is local and an SVG, then it is opened in Inkview. If it is a URL, to the SVG file, then that is viewed as well. If the file is not SVG, then it would be dealt with as described in the spec. Ideally, html would be opened in one's default browser, and other media would be shuttled to where it needs to go. I'm trying to get this feature into the next release. I think inkview is a good app in its own right as a simple viewer. I'm trying to decide if I should make these features into an inkbrowse app that is similar to inkview, but for browsing the web and local svg files. What this looks like needs to be debated. Initially I would like a UI like a web browser but for SVG content only. Do you all agree with me that this should be a separate application or should it be rolled into inkview? I could make it so that Inkview accepts URLs and could have a browsing interface and a simple menu system that can be hidden. It would be good to allow Inkscape to open SVG files that are qualified URLs (and I remember that Inkscape used to be able to do this), and then enable this functionality in inkview to add web-based svg files to a presentation, and eventually, this will allow for SVG-based animations in inkview as a presentation. Thoughts? > > ------------------------------------------------------- > SF email is sponsored by - The IT Product Guide > Read honest & candid reviews on hundreds of IT Products from real users. > Discover which products truly live up to the hype. Start reading now. > http://productguide.itmanagersjournal.com/ > _______________________________________________ > Inkscape-devel mailing list > Inkscape-devel(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/inkscape-devel > -- Jon Phillips (NEW) USA PH 510.499.0894 jon@...235... http://www.rejon.org Inkscape (http://inkscape.org) Open Clip Art Library (www.openclipart.org) CVS Book (http://cvsbook.ucsd.edu) Scale Journal (http://scale.ucsd.edu) IMPORTANT NOTICE: This e-mail and any attachment to it are intended only to be read or used by the named addressee. It is confidential and may contain legally privileged information. No confidentiality or privilege is waived or lost by any mistaken transmission to you. The RTA is not responsible for any unauthorised alterations to this e-mail or attachment to it. Views expressed in this message are those of the individual sender, and are not necessarily the views of the RTA. If you receive this e-mail in error, please immediately delete it from your system and notify the sender. You must not disclose, copy or use any part of this e-mail if you are not the intended recipient.

1 0

visible, printable and wxSVG
by Edouard TISSERANT 08 Dec '04

08 Dec '04

WxSVG (wxsvg.sf.net) is a young GPL project that as still never released files, since it as not reach beta stage. First commit should occur in January 2005. WxSVG let you "draw" GUI with Inkscape. Have a look to screenshots at http://sourceforge.net/project/screenshots.php?group_id=124832 It consist of a thin layer of python classes that derive from wxPython controls classes. It use SVG elements to layout controls such as buttons or panels and map them with some pieces of bitmap cut-out from one or two (on & off) bitmaps exported from Inkscape. SVG elements that are used to layout controls are <rect> and <g>. We were used to use the non-printable feature of Inkscape to let us draw layout rect's over the visible GUI design, and the export the GUI image without control rect's. We have upgraded to yesterday's CVS snapshot. No more non-printable feature... And invisible elements are exported in bitmaps. So we cannot work anymore in the same way... The only way I found is to set global transparency for the "Control" group to 0.0 when exporting bitmap, ant to 1.0 when working on. Non-printable object was a very nice feature. WxSVG is really need it. Is there any other solution ? Except guide-lines is there anything that Inkscape can show but not export ? Edouard.

4 6

[Fwd: Re: Cross-compiling GlibMM statically to Win32 with MinGW]
by Bob Jamison 08 Dec '04

08 Dec '04

See how cool it can be when Open Source projects help each other? ^^ Bob

1 0

E nderuara Kompani!
by unknown＠example.com 08 Dec '04

08 Dec '04

E nderuara Kompani! ITS Germany e cila operon prej vitesh ne fushen e telekomunikacionit dhe internetit, tashme deshiron te zgjeroje aktivitetin e saj edhe ne teritorin e Kosoves . Stafi yne i perbere nga inxhiniere, teknike, designer, analiste tregu, etj. Kane pergatitur www.kosova-informacion.de Ne kete portal mund te nxirren njoftime per shitblerje, qeradhenie e qeramarrje te pasurive te patundshme, automjeteve, pajisjeve, apo te sherbimeve te ndryshme si telekomunikacioni, hoteleri-turizmi, apo udhetimet, etj. Cdo njoftim mund te shoqerohet me 1-6 fotografi te objektit. Cmimi per njoftim varion ne varesi te kategorise se objektit, kohezgjatjes online te njoftimit dhe numrit te fotografive (cmim i cili do te vendoset bashke me ju). ITS Germany eshte duke kerkuar Perfaqesuesin / Distributorin e saj per Kosove i cili do te marre Eskluzivitetin e plote te www.kosova-informacion.de per te gjithe territorin e Kosoves. Marrja e Eskluzivitetit nenkupton fillimin dhe zhvillimin e gjithe aktivitetit komercial te ketij portali vetem nga nje Perfaqesues / Distributor pra vetem nga ju. Nderkohe ITS Germany merr persiper mirembajtjen dhe suportin teknik te portalit, si dhe mbeshtetjen e saj nepermjet konsulences se nevojshme ne cdo moment. Per cdo informacion apo interes tuajin, ju lutem te na kontaktoni nepermjet postes sone elektronike , ne ju mirepresim. Na lejoni tju urojme mireseardhjen ne kompanine tone, kompania me e madhe e telekomunikacionit dhe internetit ne Gjermani! Me respekt, A. Berzani Directorin Development office@...595...

1 0

E nderuara Kompani!
by unknown＠example.com 08 Dec '04

08 Dec '04

E nderuara Kompani! ITS Germany e cila operon prej vitesh ne fushen e telekomunikacionit dhe internetit, tashme deshiron te zgjeroje aktivitetin e saj edhe ne teritorin e Kosoves . Stafi yne i perbere nga inxhiniere, teknike, designer, analiste tregu, etj. Kane pergatitur www.kosova-informacion.de Ne kete portal mund te nxirren njoftime per shitblerje, qeradhenie e qeramarrje te pasurive te patundshme, automjeteve, pajisjeve, apo te sherbimeve te ndryshme si telekomunikacioni, hoteleri-turizmi, apo udhetimet, etj. Cdo njoftim mund te shoqerohet me 1-6 fotografi te objektit. Cmimi per njoftim varion ne varesi te kategorise se objektit, kohezgjatjes online te njoftimit dhe numrit te fotografive (cmim i cili do te vendoset bashke me ju). ITS Germany eshte duke kerkuar Perfaqesuesin / Distributorin e saj per Kosove i cili do te marre Eskluzivitetin e plote te www.kosova-informacion.de per te gjithe territorin e Kosoves. Marrja e Eskluzivitetit nenkupton fillimin dhe zhvillimin e gjithe aktivitetit komercial te ketij portali vetem nga nje Perfaqesues / Distributor pra vetem nga ju. Nderkohe ITS Germany merr persiper mirembajtjen dhe suportin teknik te portalit, si dhe mbeshtetjen e saj nepermjet konsulences se nevojshme ne cdo moment. Per cdo informacion apo interes tuajin, ju lutem te na kontaktoni nepermjet postes sone elektronike , ne ju mirepresim. Na lejoni tju urojme mireseardhjen ne kompanine tone, kompania me e madhe e telekomunikacionit dhe internetit ne Gjermani! Me respekt, A. Berzani Directorin Development office@...595...

1 0

Updating gtk.zip for this release
by Bob Jamison 08 Dec '04

08 Dec '04

Now that we are at the beginning of a cycle again, it is time again to start updating the gtk24.zip file with new stuff. I made a first try at a new bundle here: http://troi.hous.es3.titan.com/~rjamison/inkscape , ...at the bottom of the page. It is very large, but only because we will need to discover from development and usage what is needed from the Perl and Python libraries. It will of course get smaller with time. And I changed the name, since it is not just Gtk stuff anymore. Bob

1 0

Inkscape 0.40 - error importing AI files
by Martin Grohman 08 Dec '04

08 Dec '04

When I am importing .AI files this error message appears: ** (inkscape:9542): CRITICAL **: file document.cpp: line 511 (void sp_document_set_uri(SPDocument*, const gchar*)): assertion `document != NULL' failed Pleas help, how can I solve it? I have thousand .AI files which I could open in 0.39. Is downgrade only one solution? (OS: Gentoo unstable, same expirience with self compiled inkscape 0.40cvs and 0.40 stable in Slackware current) Thanks Martin Grohman

1 0

Suggestion: Dim-able layers.
by Jakob Ilves 08 Dec '04

08 Dec '04

Hello! I had a very brief test of inkscape 0.40 and of course had a shot at using the layers feature and I liked it, especially that one could easily temporarely hide layers. One feature I would really appreciate is an additional option for a layer, in addition to locking and hiding: dimming (or whatever to call it). That is, one can set a layer to have a opacity lower than 1 to make it semi-transparent by using some convenient GUI widget. I know, one can do that today by entering the XML-editor (we all love it, don't we?) and once there, select the group the layer consists of and add "opacity: 0.5" (or whatever) to the group's style property. So it's already available but you know, a GUI isn't bad either. Thanks for a great tool! It is getting better and better! Best regards /IlvJa PS. I know, "Dim-able layers" might sound a bit corny but I could not make up any other term. (not a native English speaker, living in Sweden).

2 1