- Inkscape Devel - Inkscape Mailman

[UI] Meeting tomorrow at LGM
by Xaviju Julián 16 Apr '16

16 Apr '16

Hi, First of all, congratulations for the hackfest event results! This email is just a reminder of the UI meeting we have tomorrow at LGM. If I'm not wrong, we have a meeting room booked between parallel sessions, around 1PM? Could CR confirm it? See you tomorrow. Xavi

2 2

Fw: The results of your email commands
by Brynn 16 Apr '16

16 Apr '16

I'm not sure what this message means. Did I make some kind of mistake sending this reply below? Or is just a hiccup in the system? Apologies if I goofed. All best, brynn -------------------------------------------------- From: <inkscape-devel-bounces(a)lists.sourceforge.net> Sent: Saturday, April 16, 2016 5:47 AM To: <brynn@...3133...> Subject: The results of your email commands > The results of your email command are provided below. Attached is your > original message. > > > - Unprocessed: > ideas. But I just want to say that we already have a Sponsors page: > https://inkscape.org/en/support-us/sponsors/ :-) > All best! > -------------------------------------------------- > From: "jelle" <chubbymoth@...36...> > Sent: Saturday, April 16, 2016 4:31 AM > To: <inkscape-devel(a)lists.sourceforge.net>; > <inkscape-devel-request(a)lists.sourceforge.net> > Subject: [Inkscape-devel] Sponsoring > > Hello all, > > > > When Martin brought up the idea if I wanted to do the translation to > > Chinese, I had to inform him that sadly, my Chinese sucks. Nor do > many > > Chinese jump to the idea of doing anything for free. Time is precious > here > > where students start at 8.00 and end some days at 22.00. Memorising > Mao's > > rantings can take a lot of energy. > > > > However, it occurred to me that we might very use sponsoring for > > translations and other tasks. If we would allow them to add a line of > text > > to documents and have some sponsor page on the website, we could > probably > > find a lot of institutes interested in sponsoring parts of the > project > > - Ignored: > > with whatever means we would allow. The sponsor page should allow > them to > > post a Logo, name and a short description of what part of the project > they > > are involved in. > > > > To my idea it would be a great idea to get more exposure on Inkscape > in > > places where not that many people have ever heard of it and maybe > even > > inspire some competition on obtaining sponsorship. Of course we > already > > have a large number of largely anonymous sponsors that have build the > > project so far, but rather than only going for crowd surfing, we > could use > > the power of sponsoring to get things done and get the word out that > > Inkscape not only exists, but actually is an option. > > > > Already we have companies sponsoring part of the project by their own > > interest, which is how we end up with extensions for cutters and > > embroidery. True, they tend to be low profile sponsors, but I fail to > see > > why we shouldn't embrace those that would like to be named. > > > > What are your feelings, thoughts and objections to something like > that? > > > > Cheers, > > > > Jelle > > > > ------------------------------------------------------------------------------ > > Find and fix application performance issues faster with Applications > > Manager > > Applications Manager provides deep performance insights into multiple > > tiers of > > your business applications. It resolves application problems quickly > and > > reduces your MTTR. Get your free trial! > > https://ad.doubleclick.net/ddm/clk/302982198;130105516;z > > _______________________________________________ > > Inkscape-devel mailing list > > Inkscape-devel(a)lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/inkscape-devel > > > > - Done. > >

1 0

Test
by Jabier Arraiza 16 Apr '16

16 Apr '16

Im working in some 2Geom code and want to make test to it to know is corect working. Any one can tell basicaly how test works and how to run it. Thanks in advance, Jabiertxo.

3 12

Hackfest 2016: Discussions Summary
by Tavmjong Bah 16 Apr '16

16 Apr '16

Hi, The Hackfest was a great success. We got about 70 patches in to the code base. Highlights include fixing the GTK3 flickering bug and getting CMake to work on Windows. While most of our time was spent on hacking, we did take some time to discuss various issues. Here is a summary of those discussions. Tav Hackfest 2016 Discussions Summary ================================ Infrastructure: -------------- Git/CI: Consensus is that moving to git soon is a good idea. Benefits: 1. More familiar to outside developers. 2. Bazaar not being actively developed. 3. Easy to separate out libraries as submodules. Krzysztof has prepared a cheat-sheet http://wiki.inkscape.org/wiki/index.php/Working_with_Git Libraries that can be turned in to submodules: http://wiki.inkscape.org/wiki/index.php/Embedded_libraries lib2geom can be made into a submodule first, removing duplicate code. Krzysztof will provide documentation on how to make sublibraries. We recommend moving to GitHub for CI integration. CI (Continuous integration) Consensus is to go with GitHub. This is the most maintainable option with our limited developer resources. Mailing Lists Consensus is to move to a server at OSUOL after server with Mailman3 is available. Mailman3 is a significant improvement over Mailman2. Martin has volunteered that Inkscape is willing to install Mailman3 for OSUOL. (OSUOL has said that it is a low priority project for them and it could be one and a half years before they get to it.) Code ---- C++11 Consensus is to require C++11 after 0.92 released. Developers will be able to use C++11 features. GTK3 GTK3 offers significant improvements in support for OSX and Windows. Consensus is to switch default compilation to GTK3 after 0.92 to get more eyes looking at the problems. Most, if not all, dialogs will need to be tweaked. Then remove GTK2 after the 0.93 release (we have 700 #ifdef's to switch between the two builds). CMake The CMake build system is getting very close to being ready. We can now compile and link Inkscape on Windows using CMake. A lot of work was done at the hackfest (and at LGM). Having a good CMake build is the only hard requirement for 0.92. Roadmap ------- Krzysztof has volunteered to update the roadmap with the things we discussed during the hackfest (CMake, C++11, GTK3, etc.). Community --------- Fund-raising We discussed various options such as using patreon.com, snowdrift.coop, flattr.com. CR will do a detailed investigation of the options. Paid Development We are basically waiting on the website before we can start using our paid development model.

1 0

Website access in China - Fix applied
by Martin Owens 15 Apr '16

15 Apr '16

Dear Inkscape Users and Developers, After a lot of backwards and forwards between osuosl and fastly.net we have put in place a solution for our website's access in China. The problem was that our chinese visitors would be able to get the website, but not any of the media (or downloads) because of their great firewall. The solution was a CNAME from media.inkscape.org to fastly and some special dns configuration which I barely understand to solve the issue with access to fastly caches. (I copied and pasted what people said in two tickets and acted as a manual ticket express for the professionals) This solution is now live and I invite people in China to test the website and please report back if they can see any issues. (and also if they would like to translate pages) :-) Best Regards, Martin Owens

3 2

About build of inkscape 0.91+devel
by Jseb Tarot 15 Apr '16

15 Apr '16

The very recent pull "bzr pull" at the linking step are a error. (i use cmake for building) CMakeFiles/inkscape_base.dir/display/cairo-utils.cpp.o: undefined reference to symbol 'gdk_pixbuf_get_height' the problem come from link.txt you need add " -lgdk_pixbuf-2.0 " from directory inkscape/src/CMakeFiles/inkscape.dir/ and are the same with inkscape/src/CMakeFiles/inkview.dir/link.txt after inkscpae compile and inkscape run properly ;) Regard JsT

1 0

Re: [Inkscape-devel] Test
by javier.arraiza＠...2893... 15 Apr '16

15 Apr '16

1 0

Re: [Inkscape-devel] cmake problem
by javier.arraiza＠...2893... 15 Apr '16

15 Apr '16

1 0

cmake problem
by Jabier Arraiza 15 Apr '16

15 Apr '16

Tring to compile with cmake I get this error I say yesterday to mark: I currently have installed libgtkspell-dev and libgtkspell0, also I never have any cmake compilation. [ 37%] Building CXX object src/CMakeFiles/inkscape_base.dir/ui/dialog/tile.cpp.o /home/jtx/Development/inkscape/offset/src/ui/dialog/text-edit.cpp:29:32: fatal error: gtkspell/gtkspell.h: No existe el fichero o el directorio compilation terminated. src/CMakeFiles/inkscape_base.dir/build.make:9398: fallo en las instrucciones para el objetivo 'src/CMakeFiles/inkscape_base.dir/ui/dialog/text-edit.cpp.o' make[2]: *** [src/CMakeFiles/inkscape_base.dir/ui/dialog/text-edit.cpp.o] Error 1 make[2]: *** Se espera a que terminen otras tareas.... CMakeFiles/Makefile2:618: fallo en las instrucciones para el objetivo 'src/CMakeFiles/inkscape_base.dir/all' make[1]: *** [src/CMakeFiles/inkscape_base.dir/all] Error 2 Makefile:127: fallo en las instrucciones para el objetivo 'all' make: *** [all] Error 2 Thanks in advance, Jabiertxo.

3 5

0.91 performance when zoomed in
by Saar Drimer 14 Apr '16

14 Apr '16

Hello everyone, I work with Inkscape nearly every day, but am now experiencing some painfully slow performance with some files (that I cannot share right now, sorry!) I'm working with Inkscape 0.91 r13725 on Ubuntu 15.10 with an i7-5500 and 16GB of RAM. The designs are not particularly complex, but have one feature that might be relevant: I'm working with dimension accurate objects that can be very small, 0.1mm and below (I design printed circuit boards). The slowness becomes painful when zoomed in onto the small objects; it happens when I try zooming, choosing objects, moving them, and even changing tools from 'node' to 'select'. nearly every such operation I get the greyed-out Ubuntu stall. Working on the design when zoomed out is not practical, but it is quite a bit faster performing. Another thing that's happening that could be related is the following prompts keep appearing on the console: (inkscape:15569): Pango-CRITICAL **: pango_font_family_list_faces: assertion 'PANGO_IS_FONT_FAMILY (family)' failed (inkscape:15569): Gtk-CRITICAL **: IA__gtk_tree_view_scroll_to_cell: assertion 'tree_view->priv->tree != NULL' failed I could not find any report for how to handle these, and discover if they are related to the performance problems. Searching for a solution through looking at bug reports, I've tried: * Running with fresh preferences.xml * Geometric bounding box * Reducing the complexity of the design * Hiding layers (there are 24 layers) to only ones that are relevant for the operation (usually only two layers) * Hiding rulers and scroll-bars * Maximising memory and threads (with restart) I'm out of ideas, and I hope that someone might be able to recommend something. If there are no ideas, I'll work on a design that I can share so that we could work though it. Thanks, Saar.

9 26

Fw: new important message
by unknown＠example.com 12 Apr '16

12 Apr '16

Hello! New message, please read <http://granavirtual.info/large.php?p3> artista.listas@...3374... --- Este email foi escaneado pelo Avast antivírus. https://www.avast.com/antivirus

1 0

Inkscape build issues
by Bryce Harrington 12 Apr '16

12 Apr '16

There appears to be a build breakage in Launchpad - see link below. ../../src/widgets/eek-preview.cpp:499:32: error: ‘style’ was not declared in this scope gtk_paint_diamond( style, Also, last time I checked, 'make dist' when configuring with autoconf was not producing a valid dist, which I need in order to compare with the cmake-produced dist tarball. Would someone mind looking into getting that fixed up? Thanks, Bryce ----- Forwarded message from Launchpad Buildd System <noreply@...1881...> ----- Date: Tue, 12 Apr 2016 11:12:52 -0000 From: Launchpad Buildd System <noreply@...1881...> To: Bryce Harrington <bryce@...961...> Subject: [Build #9566291] i386 build of inkscape-trunk 1:0.91.0+devel+14790+62~ubuntu14.04.1 in ubuntu trusty RELEASE [~inkscape.dev/ubuntu/trunk] Reply-To: Launchpad Buildd System <noreply@...1881...> * Source Package: inkscape-trunk * Version: 1:0.91.0+devel+14790+62~ubuntu14.04.1 * Architecture: i386 * Archive: ~inkscape.dev/ubuntu/trunk * Component: main * State: Failed to build * Duration: 22 minutes * Build Log: https://launchpad.net/~inkscape.dev/+archive/ubuntu/trunk/+build/9566291/+f… * Builder: https://launchpad.net/builders/lgw01-15 * Source: not available If you want further information about this situation, feel free to contact a member of the Launchpad Buildd Administrators team. -- i386 build of inkscape-trunk 1:0.91.0+devel+14790+62~ubuntu14.04.1 in ubuntu trusty RELEASE https://launchpad.net/~inkscape.dev/+archive/ubuntu/trunk/+build/9566291 You are receiving this email because your team Inkscape Developers is the owner of this archive. ----- End forwarded message -----

2 2

Re: [Inkscape-devel] Fwd: Check coding style examples
by Maren Hachmann 09 Apr '16

09 Apr '16

Hi everyone, I'm forwarding this message from Sylvain (website contributor, French translator), which bounced when he tried to send it to the devel mailing list. Could someone please double-check if the salvaged code examples on the website correspond to the style guidelines? Thanks! Kind regards, Maren Message from Sylvain: Hello everybody, There were previously code examples on the page of the website about the coding style. These were removed when a highlighter plugin was removed from the CMS. We could get them back from a backup but I restored the format myself as it was encoded (with \r\n instead of line endings and many spaces had run away). Could you please check that the 3 codes are really conformant to the coding style, then correct errors or describe them? The codes are only on the French version of the page; I will add them on the English version when we will be sure they are good. https://inkscape.org/fr/developper/style-du-code-source/ Note: I am not on the inkscape-devel mailing list, remember to keep me as a receiver of mails about this topic. -- Sylvain

3 5

Status of the meetting on LGM
by Jabier Arraiza 09 Apr '16

09 Apr '16

Hi to all, I only want to know if is confirmed the UX meeting/s on LGM with Xavi group?

2 2

Easying slur fine-tuning engraving in Lilypond files through Inkscape
by Joan Sanz 08 Apr '16

08 Apr '16

(PRELIMINARY NOTE: This is a feature request. I'm writing to this mailing list because it seems the tracker mailing list has been inactive since 2007. If I'm doing the wrong thing, please tell me how to proceed. Please forgive me if I'm causing any inconveniences and consider providing some guidance on to which wishlist should I address this request. Thank you very much.) * * * Hi everybody. First of all, excuse my English. It is not my mother tongue. Please also bear in mind that I'm not an expert Inkscape user and the terms I'll be using to describe my request can be ambiguous or even wrong (I hope not, though. ;)) I've been using Lilypond music engraving software (lilypond.org) for a while and I've been experiencing the pain of having to manually adjust slurs (actually drawn as bezier curves) when I want to get publishing-quality scores. The most straightforward way to achieve this is using \shapeII function in one of the following forms: \shapeII #'(()(polar 50 0.35)(polar 30 0.25)()) or \shapeII #'(()(absolute-polar 50 0.35)(absolute-polar 30 0.25)()) (Cf. the document by the creator of the function: http://lilypond-stuff.1065243.n5.nabble.com/file/n5705621/shapeII-examples.… , paragraph 4, "polar coordinates" info. Cf. also https://lists.gnu.org/archive/html/lilypond-user/2013-11/msg00823.html for more information.) The point of my request is making Inkscape assist slur editing/fine-tuning in a double way: first, taking advantage of the direct graphical editing capabilities it offers, and secondly, providing the relevant information generated in such a form the Lilypond function can understand ---the more direct, the better. The intended workflow would be: 1) Lilypond compiles the text file and outputs a pdf file. 2) Inkscape imports the generated pdf. 3) Slurs are manually edited. 4) For each slur, mathematical/Lilypond-understandable info is shown/generated (possibly by tweaking some Inkscape extension in python?) so that 5a) it can be at least manually typed into the Lilypond file, thus saving endless, painful recompiling trial-and-error attempts to get the satisfactory slur. Or, ideally, 5b) the gathered/computed info is formatted (by the extension?) and shown (directly on the svg file, on an auxiliary window?) so that it can be copied-pasted onto the lilypond file, or, even better, 5c) piped to a script that modifies the original Lilypond text file by inserting the data properly. In this case, I don't know whether the fact that the requested feature can be written in python and that the Lilypond file can be manipulated using the Frescobaldi editor (frescobaldi.org), which is written in python and allows easy extension of its features through python snippets, could automate the process even more. :) Back to the \shapeII function, the relevant stuff for the present discussion are (absolute-polar 50 0.35) and (absolute-polar 30 0.25) parentheses. Graphically speaking, this pair of parentheses contain the mathematical description of the handles used to control bezier curves drawing in Inkscape. The absolute-polar notation that shapeII understands fits *almost* directly to the data about the angles of the handle that Inkscape shows at the bottom of the main window when you're moving it (That means Inkscape somehow already provides this data, the problem is how to made it available for the requested feature). The only thing that should be tweaked when doing the math is modifying the value Inkscape gives for the *right* handle. For this value to be valid in the lilypond shapeII function it has to be subtracted to 180: valid right handle angle value = 180 - Inkscape value Secondly, the info at the bottom of the main window also tells us about the length of the moving handle. The second numerical value inside the parentheses is the ratio between the length of the handle and the distance between the distal nodes: \shapeII #'(()(absolute-polar 50 A)(absolute-polar 30 B)()) where A = left handle length / distal length B = right handle length / distal length That means getting the info about the length of the handles (the same as with angles) *and* calculating the distance between two points, i.e., the first and last nodes of the bezier curve. I'm aware this can be manually done with the measuring tool Inkscape provides, but here an automatic calculation of the distance is needed. As I said at the beginning, I'm not an expert at all, but I think that this request can be easily implemented by a python programmer (perhaps based on Inkscape-0.91/share/extensions/measure.py file?) and it would mean a *huge* improvement for the Lilypond user's community. Thanks for your attention, Joan.

1 0

Paint-order attribute needs to be put in stroke properties dialogue
by C R 08 Apr '16

08 Apr '16

We need a checkbox for it in the stroke properties tab. Currently I think it's a compile-time flag, which means it's unusable for most users. I'd love to highlight this feature in the Inkscape video at LGM. Can someone add this? For reference as to what it does, look here: https://plus.google.com/+inkscape/posts/QBxB6CDhNzZ Thanks. :) -C

11 41

Hackfest agenda
by Alex Valavanis 08 Apr '16

08 Apr '16

[FAO Hackfest attendees!] Hi All, Looking forward to welcoming you to Leeds next week. Can I suggest that everyone (optionally!) prepares a short 10-minute presentation to summarise: * Who you are! * Your involvement with Inkscape * Your "hacking goals" for the Hackfest (if you have any specific ideas) * Anything you'd like to learn more about or discuss with the other developers There's no pressure to prepare any slides, or even to present anything if you're too busy or you're not comfortable with the idea... it's just a means of getting to know each other and starting things rolling. Also, send me a private message (off list) if you'd like to swap contact details, and/or meet for a drink on Sunday evening. Best wishes, AV

2 1

Fwd: Full-time OSL Systems Engineering opening
by Bryce Harrington 07 Apr '16

07 Apr '16

Passing along this job opportunity in case anyone is interested. OSUOSL hosts Inkscape's website, as well as a number of other open source projects. ----- Forwarded message from Lance Albertson <lance@...2167...> ----- Date: Wed, 6 Apr 2016 11:19:30 -0700 From: Lance Albertson <lance@...2167...> To: hosting@...2167... Subject: [Hosting] Full-time OSL Systems Engineering opening We have a full-time systems engineer opening [1] at the OSL! This is to replace the vacancy that Jordan left when he went onto the Linux Foundation. If you or anyone else you know might be interested, please have them submit an application. I'm also open to any suggestions as to where we can promote this posting. Please pass this along to anyone you think might be interested. Thank you all! [1] https://osuosl.org/about/employment/full-time-systems-engineer -- Lance Albertson Director Oregon State University | Open Source Lab _______________________________________________ Hosting mailing list Hosting@...2167... http://lists.osuosl.org/mailman/listinfo/hosting ----- End forwarded message -----

1 0

A little draw
by Jabier Arraiza 07 Apr '16

07 Apr '16

Hi to all, I have some minutes and do this for the hackfest if any one want to use, feel free to use and tweak! https://inkscape.org/en/~jabiertxof/%E2%98%85hackfest-leeds-donate-button-p… Maybe we can remplace reelway font to EuphoriaScript Sorry for the duple first one have atachment big and there is some hurry on the mesage. Cheers, Jabier.

2 3

A little draw
by Jabier Arraiza 07 Apr '16

07 Apr '16

Hi to all, I have some minutes and do this for the hackfest if any one want to use, feel free to use and tweak!

1 0

Re: [Inkscape-devel] 0.91 performance when zoomed in (Saar Drimer)
by jelle 06 Apr '16

06 Apr '16

Hello Saar, Indeed you found your culprit, but added to that I see a lot of transparency objects in your design. If you have many layers as your design does and each of those has transparent objects in them I can imagine that things got a tad slow. Instead of a simple integer being used to display a single colour every layer of transparency needs to get calculated, added to the the previous one using floating point calculations. I imagine that this is handled on a logarithmic scale 1,2,4,8 etc. per layer used or per overlapping object. If your bottom layers were masked stacks of the same type of objects, I can imagine that the calculations of the masks are applied after going through the whole object stack calculation. Maybe using clips instead would make the result faster as well as those are simpler calculations to my knowledge. In any regard using lots of floating points explains the delay in screen refresh as well. It certainly isn't the amount of nodes. Cheers, Jelle

1 0

Escher Sketch and interactive tiled cloning.
by Mark Schafer 06 Apr '16

06 Apr '16

Anyone seen this: - https://levskaya.github.io/eschersketch/ Works quite well as a live sketch tiling tool. Possibly misnamed. I see we have many of these reflection modes which can only be reached via Edit/Clone/CreateTiledClones... The modes for which are explained here: - http://wiki.inkscape.org/wiki/images/WallpaperTransformations.png linked from here: - http://wiki.inkscape.org/wiki/index.php/OnCanvasSymmetryTool I can see several pages here and there on proposals for an interactive UI. E.g. the one above, http://wiki.inkscape.org/wiki/index.php/Tiled-Clones It seems the paths can't be edited after tiling. I may be wrong about this but I can't work it out. (Only one shape can be selected at a time when hitting Create. I guess you have to group them first) I found this tutorial - http://tavmjong.free.fr/INKSCAPE/MANUAL/html/Tiles.html I seem to recall a lot of UI work was done on a way to make his work - maybe a year or more ago. I'm clearly using the wrong google search terms :( Did any of it make it into a release ? GSOC ?

2 1

0.91 performance when zoomed in (Saar Drimer)
by jelle 04 Apr '16

04 Apr '16

Saar, Can you take a look at the objects using the XML editor and see what that tells you? To me it sounds like you may have some opacity or blur filters still going on. Also when you use the no filter display, is it still the same? That should give a decent clue as to what is going on. Cheers, Jelle

1 0

Fwd: Hackfest catering and venue information
by C R 04 Apr '16

04 Apr '16

Nice! There is also this traveling with me on the 11th (will get there about 12:00pm) http://www.opendesignstudio.org/inkscape/samples/omgcoffee.jpg It's taking every ounce of resistance I have not to break it out. XD -C On 4 Apr 2016 6:40 pm, "Alex Valavanis" <valavanisalex@...400...> wrote: > Hi All, > > I have booked a dinner for the last night: Wednesday 13 April at 7pm > at the Cross Keys pub in Leeds. The menu (attached) is traditional > Yorkshire cuisine. > > Looking forward to seeing you in Leeds! > > Best wishes, > > > Alex > > On 31 March 2016 at 18:42, Alex Valavanis <valavanisalex@...400...> wrote: > > We have the venue from 9-5 each day, so let's say 9 on Monday. There are > a > > couple of friendly, and reasonably quiet pubs nearby if we want to carry > > things on informally after 5 though. > > > > AV > > > > On 31 Mar 2016 6:30 p.m., "Tavmjong Bah" <tavmjong@...8...> wrote: > >> > >> > >> What time should/can we start on Monday? > >> > >> Definitely interested in meeting for dinner on Sunday. > >> > >> Tav > >> > >> On Thu, 2016-03-31 at 12:12 +0100, Alex Valavanis wrote: > >> > [Can ignore if you're not attending the Hackfest!] > >> > > >> > Hi All, > >> > > >> > Some information about the Hackfest venue, and a request for your > >> > dietary requirements... > >> > > >> > == Venue == > >> > The Hackfest venue will be in the Evans Room at Devonshire Hall in > >> > the > >> > Hyde Park area of Leeds [1]. It is a traditional "Oxbridge style" > >> > stone-built hall. Our meeting room will accommodate 10 delegates. > >> > > >> > == Catering == > >> > A buffet lunch will be provided each day. I will suggest that we > >> > break for lunch at 1300 each day, unless there are any objections. > >> > Please let me know by tomorrow if you have any special dietary > >> > requirements. > >> > > >> > There will also be an unlimited supply of tea, coffee and biscuits. > >> > Sugar, milk and soy milk will be provided. > >> > > >> > == Facilities == > >> > * Wireless networking > >> > * UK mains power (remember to bring your own socket adapters if > >> > you're > >> > coming from outside the UK!!) > >> > * Data projector & screen > >> > * Flipchart and pens > >> > > >> > == Nearby amenities == > >> > There are a few pubs, bars, cafes and coffee shops 5 minutes walk > >> > away > >> > from the venue if we want a change of scenery. There is also a small > >> > convenience store. > >> > > >> > The venue is located on the Woodhouse Ridge nature trail if you want > >> > to step out for some fresh air [2]. > >> > > >> > == Local contact == > >> > I live within walking distance of the venue. Send me a message if > >> > you > >> > get stuck! I'll also be free on the Sunday evening before the > >> > Hackfest if anyone would like to meet for food/drink in Leeds City > >> > Centre. > >> > > >> > Best wishes, > >> > > >> > > >> > Alex > >> > > >> > [1] http://www.meetinleeds.co.uk/devonshire-hall > >> > [2] http://www.woodhouseridge.org.uk/ > >> > > >> > ------------------------------------------------------------------- > >> > ----------- > >> > Transform Data into Opportunity. > >> > Accelerate data analysis in your applications with > >> > Intel Data Analytics Acceleration Library. > >> > Click to learn more. > >> > http://pubads.g.doubleclick.net/gampad/clk?id=278785471&iu=/4140 > >> > _______________________________________________ > >> > Inkscape-devel mailing list > >> > Inkscape-devel(a)lists.sourceforge.net > >> > https://lists.sourceforge.net/lists/listinfo/inkscape-devel > > > ------------------------------------------------------------------------------ > > _______________________________________________ > Inkscape-devel mailing list > Inkscape-devel(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/inkscape-devel > >

2 1

Hackfest catering and venue information
by Alex Valavanis 04 Apr '16

04 Apr '16

[Can ignore if you're not attending the Hackfest!] Hi All, Some information about the Hackfest venue, and a request for your dietary requirements... == Venue == The Hackfest venue will be in the Evans Room at Devonshire Hall in the Hyde Park area of Leeds [1]. It is a traditional "Oxbridge style" stone-built hall. Our meeting room will accommodate 10 delegates. == Catering == A buffet lunch will be provided each day. I will suggest that we break for lunch at 1300 each day, unless there are any objections. Please let me know by tomorrow if you have any special dietary requirements. There will also be an unlimited supply of tea, coffee and biscuits. Sugar, milk and soy milk will be provided. == Facilities == * Wireless networking * UK mains power (remember to bring your own socket adapters if you're coming from outside the UK!!) * Data projector & screen * Flipchart and pens == Nearby amenities == There are a few pubs, bars, cafes and coffee shops 5 minutes walk away from the venue if we want a change of scenery. There is also a small convenience store. The venue is located on the Woodhouse Ridge nature trail if you want to step out for some fresh air [2]. == Local contact == I live within walking distance of the venue. Send me a message if you get stuck! I'll also be free on the Sunday evening before the Hackfest if anyone would like to meet for food/drink in Leeds City Centre. Best wishes, Alex [1] http://www.meetinleeds.co.uk/devonshire-hall [2] http://www.woodhouseridge.org.uk/

5 10