- Inkscape Devel - Inkscape Mailman

Re: [Inkscape-user] Gradient Editor design and Macromedia Freehand
by Jon Phillips 29 Jan '05

29 Jan '05

Jonathan Leighton wrote: > Hi Jon, > > I posted to the list saying I could do this also, but it doesn't seem to > have showed up yet (it's annoying how slow they are!). Anyway, I'm not > bothered either way, but I wanted to make sure we don't both do the same > thing and waste our time! Let me know whether you're going to do this, > or would like me to. As I say, it doesn't matter which. Why don't you go ahead and do -- it is a simple, but helpful task. You can see an example of what I did previously here: http://rejon.org/projects/inkscape/reference/ I took screenshots of gimp and adobe illustrator for ref. Jon > > Jon Phillips wrote: > >> Bryce Harrington wrote: >> >>> On Thu, 16 Dec 2004, Jozsef Mak wrote: >>> >>>> Among all the programs I�ve ever used, Freehand has the best >>>> implementation of gradients and color management; plus the finest >>>> interface. >>>> >>>> From the gradient options you can chose Linear, Radial, Logarithmic, >>>> Contour and Cone. You can further modify each of these by applying >>>> Normal, Repeat, Reflect and Auto size modifiers to the gradient >>>> styles. In addition, the gradients allow you to interactively modify >>>> the style within the object using small handles. With this you can >>>> create a great variety of patterns including abstract ones and also >>>> 3D effects. (Freehand also has a sophisticated 3D tool, as well, >>>> which is similar to Corel�s but more advanced). >>> >>> >>> >>> >>> From the above it sounds like Freehand should be analyzed for ideas on >>> redesigning the Gradient Editor. >>> >>> Does anyone happen to have a copy of this, that they could make some >>> screenshots or elaborate on Jozsef's comments above? >>> >> >> I have a copy of MX. I will take some screenshots and post them on my >> site like I did for illustrator. I'm taking requests.... >> >> Jon >> >> >>> >>> ------------------------------------------------------- >>> This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting >>> Tool for open source databases. Create drag-&-drop reports. Save time >>> by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. >>> Download a FREE copy at http://www.intelliview.com/go/osdn_nl >>> _______________________________________________ >>> Inkscape-user mailing list >>> Inkscape-user(a)lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/inkscape-user >>> >>> >>> >> >> > -- Jon Phillips USA PH 510.499.0894 jon@...235... http://www.rejon.org Inkscape (http://inkscape.org) Open Clip Art Library (www.openclipart.org) CVS Book (http://cvsbook.ucsd.edu) Scale Journal (http://scale.ucsd.edu)

6 10

(no subject)
by unknown＠example.com 29 Jan '05

29 Jan '05

Hi, <snip> > Ha, I use 6.4, which may be why I didn't see it taking more than 2 > minutes. Please compile 6.4 and see if it fixes it for you. This will > be an important result if it does. > > Just tried CVS with your fix, it does improve the load time but not by > much (was 1:50, now 1:39). I just upgraded to boehm-gc 6.4 - and now the file loads in about 35s. Moreover, I can see the whole file unlike in the other programs I've tried. I'll also try to upgrade to the CVS version when it appears in a snapshot (I don't think it's there yet?) Thanks, gav. -- Gavin Band <gavinband@...663...> ___________________________________________________________ Book yourself something to look forward to in 2005. Cheap flights - http://www.tiscali.co.uk/travel/flights/ Bargain holidays - http://www.tiscali.co.uk/travel/holidays/

4 6

Gradient Editor design and Macromedia Freehand
by Bryce Harrington 28 Jan '05

28 Jan '05

On Thu, 16 Dec 2004, Jozsef Mak wrote: > Among all the > programs I�ve ever used, Freehand has the best implementation of gradients > and color management; plus the finest interface. > > From the gradient options you can chose Linear, Radial, Logarithmic, Contour > and Cone. You can further modify each of these by applying Normal, Repeat, > Reflect and Auto size modifiers to the gradient styles. In addition, the > gradients allow you to interactively modify the style within the object > using small handles. With this you can create a great variety of patterns > including abstract ones and also 3D effects. (Freehand also has a > sophisticated 3D tool, as well, which is similar to Corel�s but more > advanced). >From the above it sounds like Freehand should be analyzed for ideas on redesigning the Gradient Editor. Does anyone happen to have a copy of this, that they could make some screenshots or elaborate on Jozsef's comments above? Bryce

3 3

Re: [Inkscape-user] new screenshot
by bulia byak 28 Jan '05

28 Jan '05

On Sun, 23 Jan 2005 10:35:55 +1000, Adam Pearson <addon@...666...> wrote: > Is this one of any interest to you? I am really a beginner with Inkscape > and have set out to learn how to do drawings like the attached. 8-) Sorry for not responding before. Ideally, a screenshot must be both: (1) visually stunning and (2) demonstrating some new feature for the release. Yours is nice visually (is it your artwork?) but I'd like it to show not just the layer menu but the newest layer menu which would show some of the layers grayed out (hidden) and some in [] (locked). Can you please do that? Best of all in 1280x1024 resolution which is what other screenshots use, but this is not necessary. And a request for everyone: One feature we really need showcased for 0.41 is the color tracing. Can someone please do it? Ideally it would show several trace modes, different number of colors, etc., with brief captions as on this one: http://inkscape.org/screenshots/gallery/inkscape-0.40-CVS-linux-trace.png Make sure the original photo is free to reproduce.

2 1

HIG - Access keys in dialogs
by Bryce Harrington 28 Jan '05

28 Jan '05

Jizzbug, In reading the HIG I notice it specifies that labeled widgets in dialogs must have access keys in their labels. See for example, http://developer.gnome.org/projects/gup/hig/2.0/images/controls-spin-box.png http://developer.gnome.org/projects/gup/hig/2.0/images/controls-text.png In each, the first letter of the widget is underlined to provide use of access keys. To my knowledge, this has not been done for any of the Inkscape dialogs so far, but it seems like a good usability enhancement. Bryce

1 0

Re: [Inkscape-devel] Re: [Inkscape-user] loading large files
by unknown＠example.com 28 Jan '05

28 Jan '05

Hi, Thanks very much for looking into this further. I re-emerged inkscape and tried loading the file again but, I'm afraid, gave up after 12 minutes or so. <snip> > > Your file did eventually load, although I think it may have taken as > > > much as half an hour to do so on my machine. > > > > Wow, it was under 2 minutes on mine :) (I'm speaking about > > 1236745up.svg, is this what you tried?) > > Yep. I was also starting to swap a bit towards the end, which may have > contributed. > > Mine didn't get to the point of swapping, instead (watching top) I see that it rapidly uses up 55.5% or so of memory and then stops using any more (at least until I killed it). What machines you are running on? Mine is a 1700MHz Pentium M, 512Mb ram. <snip> > > Just FYI, Batik ran out of memory on that document, and Adobe never > > loaded it either (maybe it would if I waited long enough, but I doubt > > that). So Inkscape was the only software capable of loading and even > > editing it. > > Yes, Batik failed for me as well. I didn't have Adobe handy. > > w.r.t singly-linked-lists, does Sodipodi store these structures differently? Sodipodi opens this file in about 30 seconds on my machine. However, both sodipodi and my colleague's copy of Adobe, which also loads the file, seem to chop off the image (which is very wide) at its left and right extents - so perhaps they don't really load the whole file. Perhaps I'm just asking too much & should make my files smaller? Thanks again, gav. P.S. Incidentally, Adobe has a nice feature - a progress bar while it's loading... ___________________________________________________________ Book yourself something to look forward to in 2005. Cheap flights - http://www.tiscali.co.uk/travel/flights/ Bargain holidays - http://www.tiscali.co.uk/travel/holidays/

3 5

Re: Bug Status for 0.41 -- 1/26
by Bryce Harrington 27 Jan '05

27 Jan '05

Thanks go both to Arpad for organizing translators, and to Josh for bringing the AUTHORS file up to date. Now is also a good time to take a look at the tutorials and man page for any updates needed. Browsing through the crit-9 bugs, none look to me to be show stoppers. Number 1107922 looks like it could be bad if anyone can replicate it. Does anyone else see any particular ones that they think must be fixed before the release? Bug ID# PRI Owner Description ------------------------------------------------------------------------ 1108620 9 joncruz Drag and drop case sensitive 1107775 3 pjrm wrong paper sizes 1105787 9 johncl Installation problem: libatk-1.0-0.dll not found 990677 6 ted readme needed for extensions 1107562 9 bulia Node Align Crash 1101210 3 bulia CVS: Flowtext not working 1103001 3 ted Grid is shown non-uniform 1102318 9 kees Crash on "save as" 1104741 6 bulia Printout 25% too large 1105352 6 pjrm Markers are not shown in Plain-SVG-Export 1075860 9 pjrm WIN: assert when doing stamping during move 1080252 9 bryce crash on intersectiion 1068116 6 mental complie error in gc.cpp with inkscape-20041116 1076872 6 kees ngettext isn't used 933461 6 kees Win32 Install Directories 1068299 6 kees Build failure on mips(el) 1100675 6 mental svg tag requires xmlns attribute in CVS2005-01-10 1097652 9 pjrm crash on whitespace property value ------------------------------------------------------------------------ Current: 120 Goal: 150 Feature Freeze - Jan 26 Hard Freeze - Feb 1 Release - Feb 5-6 Bryce On Sat, 8 Jan 2005, Bryce Harrington wrote: > Okay, since there were no comments to the contrary, I suppose it's safe > to assume this proposal is acceptable to everyone. If not, lemme know. > We'll shoot for 150 points for low/med/high (3/6/9 pts) that are closed > as FIXED (i.e., no points for dups, won't fix, invalid, etc.) and that > are confirmed as present in 0.40 or in CVS. > > Bryce ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ Inkscape-devel mailing list Inkscape-devel(a)lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel

6 5

Feature Freeze for 0.41
by Bryce Harrington 27 Jan '05

27 Jan '05

Hi all, We will be entering feature freeze mode today, Jan 26th, as mentioned in the bug status message on 1/24, unless anyone has any objections. At this point, changes to the codebase should be restricted to bugfixing activity. If you have feature work still needing wrapped up, please try to do so today. For the next couple of weeks, if you wish to continue to do development work while the release is coming together, you're encouraged to do so on a branch or in the experimental module. See Wiki for details. Around Feb 1st, we'll switch to a hard freeze mode. At this point the focus will narrow to showstopper and packaging bugs. We'll be putting out release candidates at this point for folks to test out. The final release will probably come a few days after the hard freeze, assuming everything goes well. Thanks, Bryce

3 3

Re: [Inkscape-user] Re: Inkscape-user digest, Vol 1 #238 - 1 msg
by Bryce Harrington 27 Jan '05

27 Jan '05

Hi Lee, How's it going? Are you still having compile errors? We're closing in on a 0.41 release within a couple weeks, and I hope we've gotten your compile troubles squared away (or can do so easily if not). Thanks, Bryce On Tue, 23 Nov 2004, Lee McLain wrote: > Hi everyone, > I have been trying to compile Inkscape .40rc3 for about a week now > with no luck. I keep getting dependency errors. I am trying to compile > on both SuSE 9.0 and Fedora Core 3 with the same error...I am not at the > computers right now, so I can't remember the exact error. > The main problem is that I easily compiled .39 on the SuSE system, > but I don't know what I am missing with .40 and the subsequent > releases. What packages are needed when going from .39 to the future > versions? > > Thanks, > Lee > > > > ------------------------------------------------------- > SF email is sponsored by - The IT Product Guide > Read honest & candid reviews on hundreds of IT Products from real users. > Discover which products truly live up to the hype. Start reading now. > http://productguide.itmanagersjournal.com/ > _______________________________________________ > Inkscape-user mailing list > Inkscape-user(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/inkscape-user > >

1 0

Inkscape icons and resolution
by Ashwin Bharambe 27 Jan '05

27 Jan '05

Hi all, This is just a random thought: is it possible for the icons to be differently stroked depending on the resolution? For example, I think many of the icons look much crisper (to me, at least) if I decrease the stroke width. However, if I go to a higher resolution display, they will perhaps look too "broken". -Ashwin

5 5