- Inkscape Devel - Inkscape Mailman

Re: [Inkscape-devel] How to change visible selections in EnumParam
by Jabier Arraiza 19 Jun '17

19 Jun '17

hi: On Sun, 2017-06-18 at 16:54 +0200, Michael Soegtrop wrote: > Dear Inkscape Team, > > my bool op LPE has classical bool operations suitable for closed > paths > and line cutting operations suitable for one open and one closed > path. I > wanted to adjust the options shown in the EnumParam depending on the > path type, but couldn't find out how. Also it would be interesting to > know if there is way to know when the path in a PathParam is set, > because at this point I need to adjust the options shown. Otherwise I > would make the decision on the main path and always require that the > operand path is closed (and give a warning if not). You need a header var "Geom:Pathvector older_pv" asigning it in the end of "do_before effect" and finaly compare it with current path You also need the definition of the header put the select widget to be available in all LPE, for this you redefine the "effect::widget" like in a lot of effects, perspective envelope, Laticce 2.... > Or do you think it makes more sense to have two LPEs, one classical > bool > LPE which only works for closed paths and one path trimming LPE to > trim > sets of open paths with a closed path. I think separating the two > might > be more obvious to the user. Not sure [UX] team? > Best regards, > > Michael Chers

2 1

Some help needed with making operand path invisible in bool op LPE
by Michael Soegtrop 17 Jun '17

17 Jun '17

Dear Inkscape Team, with my recent pull request, the bool op LPE should work properly. A few notes / questions: 1.) The operand (other) path is not made invisible. I typically have my operand paths in an invisible layer. Is this ok, or should the bool op LPE make the operand path invisible? If so, I wonder how this could be done. The main problem is that I have no idea how I could re-enable the operand path when the bool op LPE is disabled (with the eye button in the bool op list). As far as I can tell, the bool-op code doesn't run at all when the bool-op is disabled, only when it is enabled. Or should I change the bool op so that it works on groups of paths (as created with Ctrl+K)? This would obviously solve the problem, but then I would need a grouping LPE, because one of my operand paths is typically a result of an LPE stack, while the other isn't 2.) The cut boolops only make sense if one path is an open path and one path is a closed path. Should I disable the cut options, if this is not the case? How can I detect this? 3.) The LPE only works on paths, not on objects. Is this ok? I guess this is the case for all LPE. 4.) The LPE has options for the fill type (odd-even, non-zero, positive). For the operand path (the other path) I can find out the inherent fill type of the path. The problem is somehow that the fill type is stored in SPItem objects, but the LPEs operator on SPCurve. The closest point upstream in the call stack is SPLPEItem::performPathEffect, but the SpItem is not passed down the the specific LPE code. Any ideas? Btw.: fill type negative would be nice to have. Best regards, Michael

2 2

Marketing/Advocacy/Outreach Team - Proposed Objectives
by Ryan Gorley 17 Jun '17

17 Jun '17

As perhaps a primer to forming a new team to serve the Inkscape project, I would put forward for discussion the following *objectives* for such a team: 1. *Increasing the project's contributor base,* as measured by code commits, non-technical contributions, cash contributions, etc. 2. *Improving the market position of Inkscape*, as measured by user and target-user opinion studies, favorable press coverage, increased usage, etc. 3. *Increasing community loyalty and engagement*, as measured by participation in physical meetups, online discussions, social sharing, etc. Finding consensus about objectives seems more productive at this stage than strategy and tactics. I'd love to hear what you all think or would add/remove/edit. *(Bryce: I had this largely written prior to your response to the other thread, so feel free to steer this conversation in a different direction if you wish)*

7 19

Social Media Management
by Robert Sterbal 17 Jun '17

17 Jun '17

I'm interested in helping with the social media management of the project. I didn't see who to contact to help with social media on this link: https://inkscape.org/en/contribute/to-do-list/ Who do I ask, and how do I contact them? Thanks, Robert Sterbal robert@...3541... 412-977-3526 call/text

7 17

Join Us to Discuss Marketing Inkscape
by Ryan Gorley 17 Jun '17

17 Jun '17

If you're interested in volunteering your time and talent to help promote Inkscape, join us on the Freenode #inkscape-devel IRC channel ( https://inkscape.org/en/*developer/chat/), next *Tuesday 20 June @ 20:00 GMT*. This will be an informal meet-and-greet and a chance to take an inventory of who is interested and what experience we can bring together to spread the word about this amazing project. If you can't make it but wish to be involved, don't worry, we'll also organize a follow-up meeting in July. I look forward to meeting you all there! Ryan Gorley @ Dijt <https://dijt.co/>

2 1

svg-2 text gsoc project?
by Boudewijn Rempt 15 Jun '17

15 Jun '17

Hi, We're currently working really hard to improve interoperability between inkscape and Krita by rewriting all our vector support to svg. We're also doing a new text object, based on svg instead of odg. So we're really interested in following along the 2017 svg-2 text gsoc project to see what we can learn. Is there already a branch and a wiki page for this project we can follow? -- Boudewijn Rempt | http://www.krita.org, http://www.valdyas.org

2 2

CI timeout for merge request
by Maximilian Gaukler 14 Jun '17

14 Jun '17

Hi, as I saw you are migrating to gitlab, I wanted to submit a merge request for a patch I already proposed on launchpad. Unfortunately, the build takes way longer than the 1 hour timeout and therefore all my commits are flagged as "build failed": https://gitlab.com/mgmax/inkscape/builds/18388005 The first run made it to 77%, the second run to 39% of the build :-( Greetings, Max

3 3

Git submodule policy / address sanitizer
by Michael Soegtrop 14 Jun '17

14 Jun '17

Dear Inkscape Team, since gitlib is up and running, the question arizes if we want to use submodules, and if so which folder structure should we use. I want to add address / memory sanitizer support and use https://github.com/arsenm/sanitizers-cmake. It is just a few files and I could copy them verbatim, but it would make sense to add it as a submodule. In case you don't know what address/memory sanitizer is: it creates instrumented builds (about 2x slower) which check for all sorts of invalid memory usage, like access to freed memory or reading uninitialized variables. The cmake scripts above enable this by a cmake define, similar to switching between debug and release builds. In my experience it saves a lot of time in tracking down obscure bugs in complex C++ code. I right now have a debug/release deviation I want to track down. Best regards, Michael

7 8

[GitLab Migration] Make old repository read-only
by Eduard Braun 14 Jun '17

14 Jun '17

2 1

GitLab Issues Tracker
by Martin Owens 14 Jun '17

14 Jun '17

Dear Bug hunters and Developers, GitLab contact Connor Shea has asked us what we might need in the GitLab issues tracker to consider using it as our bug tracker instead of launchpad. After talking with su_v and bryce on IRC, I've drafted this possible email detailing some of the issues: https://inkscape.org/en/paste/11094/ We need your input too, if there are things that the launchpad system does, or even if there are things you wish it did but GitLab could do. Or if there are specific issues with the GitLab user interface. We can detail them here and send them to GitLab. I've love specifically to hear more from Mc and jazzynico as they've done a lot of bug work. Thanks for your help. Best Regards, Martin Owens

5 5