- Inkscape Devel - Inkscape Mailman

Re: [Inkscape-devel] Regarding memory usage when embedding pictures
by Mahen 07 Feb '11

07 Feb '11

Thanks a lot for replying, Jon ! Well indeed I tried to embed the pictures in the SVG. Let's say they'are about 2560*1920 resolution (some less some more). So : 2560 * 1920 * 4 * 35 (number of pictures) / 1024 / 1024 = 656.25 MB and 70 MB (size on disk) * 4 / 3 = 93.3 MB Total = about 750 MB Which is indeed the memory amount taken by OO.org, but Inkscape quickly fills my 4 GB of ram (minus what is eaten by KDE of course) Well, this may be an expected behaviour actually, I just wanted to check if it had to be reported. Thanks again ! Mahen Le 07/02/2011 02:45, Jon Cruz a écrit : > On Feb 6, 2011, at 4:01 AM, Mahen wrote: > >> I tried to load my document again, and noticed Inscape was almost >> filling my 4 GB of ram. I tried to do the very same thing with >> OpenOffice draw and the memory usage was "only" of 0.7 GB. >> >> I definitely guess Inkscape is not meant for importing tons of pictures, >> but I was wondering whether there was some kind of memory leak or waste >> triggered by this particular scenario and if you think I should make >> another bugreport ? > > Yes, memory use was a major factor discussed when we were going over linked vs. embedded. If you were seeing this while linking in the images, we'll have a larger problem. On the other hand if the images were actually embedded, some such bloat was expected. This is part of why the consensus was to avoid switching to always embedding until we had such issues covered, but someone went ahead and flipped things in the code anyway. > > To get a rough idea of memory use, just multiple image width in pixels by height in pixels times four and you get the rough minimum buffer needs. Also add in on-disk image file size times four and divided by three. This gives the string size needed for the XML string embed itself. > > > So the first question is are they linked or are they embedded. Second question is if you calculate the rough memory needs for all of those 35 images do they start to hit the limits of your machine? > > >

1 1

Inkscape 0.48.1 Source Packages
by Ted Gould 07 Feb '11

07 Feb '11

Hey all, I finally found the time to make all of the source packages for 0.48.1, sorry about the delay. They're uploading to Source Forge here: https://sourceforge.net/projects/inkscape/files/inkscape/0.48.1/ As per-usual please don't do mass announcements of the release until packagers for the various platforms have a chance to build installable images and upload them. Here are the hashes for the paranoid :) == MD5 == 430fa43bba96ba19a98acdd163fd86d5 inkscape-0.48.1.tar.bz2 5f744c9da0e51069994d9b6ea1e5f953 inkscape-0.48.1.tar.bz2.asc 3c179eb998d49d1c312822e15773bf6d inkscape-0.48.1.tar.gz 2df7c0bf0096b2eab0e2a79ac71328ab inkscape-0.48.1.tar.gz.asc 331fab5a407a4b016eaa35bd61eac872 inkscape-0.48.1.zip f974e2ac553571261207ec960d5b75ed inkscape-0.48.1.zip.asc == SHA1 == 9727ed11cef31c2790bf2affbddf6a6ef352753f inkscape-0.48.1.tar.bz2 e578a31f3ef37df72cb90599e3399afff9c764e5 inkscape-0.48.1.tar.bz2.asc a43467119925aee70d1d63d746f9846abb4dea91 inkscape-0.48.1.tar.gz 09bb42eabd4401e7eb4aa639393465abc916ebe5 inkscape-0.48.1.tar.gz.asc 6ae30c4d70e506e4b6437b27d88ea24404420b92 inkscape-0.48.1.zip 596e1a55486ee36afb2b28177061f12909a8b99e inkscape-0.48.1.zip.asc Thanks all! --Ted

7 13

Regarding memory usage when embedding pictures
by Mahen 07 Feb '11

07 Feb '11

Hi everyone ! First : thanks again to everyone involved for this great piece of software ! Sorry for all those bugreports about memory usage I made before (https://bugs.launchpad.net/inkscape/+bug/706294 regarding memory filled when using patterns and https://bugs.launchpad.net/inkscape/+bug/708274 regarding a slight memory increase without doing anything particular :-) But I may need to fill another one : I stumbled upon a particular situation yesterday, and I would like to know if you think this is an Inkscape issue, or just a twisted use case. I wanted to import about 35 jpg pictures (from an old digital camera, so not huge resolutions but still). Inkscape managed to import and display them. I moved them onto the canvas and worked for about 2 minutes and then my hardisk started spinning tremendously, and the kernel shot down Inkscape. (I have no SWAP and 4 GB or ram) I tried to load my document again, and noticed Inscape was almost filling my 4 GB of ram. I tried to do the very same thing with OpenOffice draw and the memory usage was "only" of 0.7 GB. I definitely guess Inkscape is not meant for importing tons of pictures, but I was wondering whether there was some kind of memory leak or waste triggered by this particular scenario and if you think I should make another bugreport ? (BTW, as I told suv, I would love to contribute to "bounties" to help improve Inkscape -- regarding tasks that wouldn't be performed otherwise, like tedious memory optimization... :-) Cheers ! Mahen

3 2

Regressions in Filters UI
by Ivan Louette 05 Feb '11

05 Feb '11

Please could we take a look at these regressions : These two ones are regressions and may cause problems to Filters Editor users when changing the values because a lot of efficient filters use much higher values than the maximum available and visible in Filters Editor : https://bugs.launchpad.net/inkscape/+bug/713056 https://bugs.launchpad.net/inkscape/+bug/713050 The following one is an older problem of the same category which has the same troublesome capacities for the user : https://bugs.launchpad.net/inkscape/+bug/713064 Thanks in advance, ivan

2 2

Re: [Inkscape-devel] Can not build inkscape-0.48
by Dmitry Shkirmanov 03 Feb '11

03 Feb '11

I installed newest version of imagemagick from source, ./configure finished without errors, but 'make' gives new error: th, std::allocator<Geom::Path> > Geom::read_svgd(const char* )': ./2geom/svg-path-parser.h:63: warning: ignoring return value of char* fgets(char*, int, FILE*)', declared with attribut e warn_unused_result CXX 2geom/svg-path.o CXX 2geom/sweep.o CXX 2geom/transforms.o CXX 2geom/numeric/matrix.o AR 2geom/lib2geom.a CXX inkscape-version.o AR libinkversion.a CXX main.o CXXLD inkscape libinkscape.a(adaptiveThreshold.o): In function `Inkscape::E xtension::Internal::Bitmap::AdaptiveThreshold::applyEffect(M agick::Image*)': /home/ya/Desktop/inkscape-0.48.0/src/extension/internal/bitm ap/adaptiveThreshold.cpp:21: undefined reference to `Magick: :Image::adaptiveThreshold(unsigned int, unsigned int, unsign ed int)' libinkscape.a(addNoise.o): In function `Inkscape::Extension: :Internal::Bitmap::AddNoise::applyEffect(Magick::Image*)': /home/ya/Desktop/inkscape-0.48.0/src/extension/internal/bitm ap/addNoise.cpp:29: undefined reference to `Magick::Image::a ddNoise(MagickLib::NoiseType)' libinkscape.a(channel.o): In function `Inkscape::Extension:: Internal::Bitmap::Channel::applyEffect(Magick::Image*)': /home/ya/Desktop/inkscape-0.48.0/src/extension/internal/bitm ap/channel.cpp:32: undefined reference to `Magick::Image::ch annel(MagickLib::ChannelType)' collect2: ld returned 1 exit status make[2]: *** [inkscape] Error 1 make[2]: Leaving directory `/home/ya/Desktop/inkscape-0.48.0 /src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/ya/Desktop/inkscape-0.48.0 ' make: *** [all] Error 2 Any suggestions? >What version of ImageMagick has been installed? Have the dev-libs ofImageMagick also been installed? > >It should also be possible to provide ./configure with a flag thattells it to compile without ImageMagick, IIRC, but I .don't know thesyntax of the top of my head. > >Kind regards, > >Diederik >>Hello, i can not build inkscape-0.48 on debian lenny../configurefinished without errors, but 'make' gives an error. >>Here is theextraction from the output: >># >># >>extension/internal/bitmap/level.cpp: In member function vir >>tual void Inkscape::Extension::Internal::Bitmap::Level::appl >>yEffect(Magick::Image*)': >>extension/internal/bitmap/level.cpp:23: error: class Magick >>::Image' has no member named level' >>make[2]: *** [extension/internal/bitmap/level.o] Error 1 >>make[2]: Leaving directory `/home/ya/Desktop/inkscape-0.48.0 >>/src' >>make[1]: *** [all-recursive] Error 1 >>make[1]: Leaving directory `/home/ya/Desktop/inkscape-0.48.0 >>' >>make: *** [all] Error 2 >># >># >>I searched through the Google but have not found solution. >>Help me please to build it.

4 3

Upgrading Inkscape's 2geom
by unknown＠example.com 02 Feb '11

02 Feb '11

Hi all, Now that 0.48.1 is 'out', shall I try and upgrade our 2geom copy? I am in a situation this month that I have time to do mindless search&replace operations, which will be necessary to do the 2geom upgrade. Cheers, Johan

4 12

Release Holdup + SVG Web question
by Daniel Hendrycks 02 Feb '11

02 Feb '11

Hi, .48.1 is supposed to be finished; someone was supposed to compile it. I am wondering, are you waiting for the site re-design to be finished, then you will release .48.1? Also, some of the SVGs I make don't show up correctly in the browser -- Daniel Hendrycks

3 2

Re : [Inkscape-translator] New translatable Keys and mouse reference
by Nicolas Dufour 02 Feb '11

02 Feb '11

Hello Leandro, Thanks for your suggestions! > De : Leandro Regueiro <leandro.regueiro@...400...> > Can you please convert the man page source to .po format as well? You > can use po4a: http://po4a.alioth.debian.org/ And please update >http://wiki.inkscape.org/wiki/index.php/DocumentationTranslation#Manual_pag… >9 It doesn't look too difficult. I'll take a look. > Can you please convert the NSH files for the Inkscape's Windows > installer to .po format? Right now is very difficult to translate and > update. >http://wiki.inkscape.org/wiki/index.php/InterfaceTranslation#Windows_instal… > Should work with po4a too. > Can you please convert the XML sources of Inkscape's user manual to > .po format in order to ease its translation? Please update > http://wiki.inkscape.org/wiki/index.php/DocumentationTranslation#User_Manual > as well. Well, the wiki really needs an update... The docbook Inskcape User Manual is no longer maintained. It was replaced in 2009 with an online manual on FlossManuals (http://en.flossmanuals.net/). Translation is possible, but the UI is not very convenient (the new booki project, currently work in progress, should bring some new tools). Please use the related mailing list (Discuss@...2558...) for details. Regards. -- Nicolas

1 0

Translation issues
by Jesper Öqvist 02 Feb '11

02 Feb '11

Hello, A couple months ago I submitted a new .po for the Swedish translation of Inkscape. Since then I've been unable to spend time on Inkscape. I would like to contribute to the source code proper but haven't had the time to do so. Anyway, I recently compiled the latest lp:inkscape version and noticed that there are several issues with translation strings not appearing properly in the GUI. One example is #: ../src/filter-enums.cpp:52 #, fuzzy msgctxt "Filter blend mode" msgid "Multiply" msgstr "Multiplicera" I have not worked with gettext before, but examining the filter-enums.cpp source reveals no reason why this string should not be correctly translated: 51 {Inkscape::Filters::BLEND_NORMAL, C_("Filter blend mode", "Normal"), "normal"}, 52 {Inkscape::Filters::BLEND_MULTIPLY, C_("Filter blend mode", "Multiply"), "multiply"}, 53 {Inkscape::Filters::BLEND_SCREEN, C_("Filter blend mode", "Screen"), "screen"}, 54 {Inkscape::Filters::BLEND_DARKEN, C_("Filter blend mode", "Darken"), "darken"}, 55 {Inkscape::Filters::BLEND_LIGHTEN, C_("Filter blend mode", "Lighten"), "lighten"} Note that "Screen" is correctly translated! So, anyone know why the original English string is displayed in the GUI? If this could be explained to me, perhaps I could fix other occurrences of missing translations which I've noticed. I'm assuming the same issue exists for other translations as well. I did do "btool clean" before I compiled this version, so this should rule out the possibility that I'm using some old version of the compiled translation, unless perhaps my main Inkscape installation is interfering? Another issue is that I could not find myself in the list of translators in the "About Inkscape" dialog. I would like to be listed there as I did spend a fair amount of time slugging through the Swedish translation. Best regards, Jesper

2 1

Poppler issues *again*
by Josh Andler 02 Feb '11

02 Feb '11

Hey All, As we know, I like my distro to be bleeding... With libpoppler 0.16.0 we're again broken with compilation. I really think that we need to work on a proper solution for this because it seems like every 6 months we have to add additional checks to compensate for how things change. Also, I noticed that libwpg 0.2 isn't detected either, I tried mucking w/ configure.ac and had no success. Cheers, Josh

4 5