- Inkscape Devel - Inkscape Mailman

inkboard abandoned files? cleanup needed.
by the Adib 01 Mar '09

01 Mar '09

I commited small patch in order to be able to compile using the "./configure --enable-inkboard" option: rev 20788 It looks that the files that I commented out have no effect in the code and are not in use. Could one please investigate in this? Using this patch inkscape opens the connect dialog. I can not prove that it works because I do not know how to connect. Thx, Adib. --- file: src/ui/dialog/Makefile_insert adib@...2145...:~/Projekte/Inkscape/inkscape_dev/src/ui/dialog$ svn diff Index: Makefile_insert =================================================================== --- Makefile_insert (Revision 20786) +++ Makefile_insert (Arbeitskopie) @@ -1,13 +1,13 @@ ## Makefile.am fragment sourced by src/Makefile.am. if WITH_INKBOARD -inkboard_dialogs = \ - ui/dialog/whiteboard-connect.cpp \ - ui/dialog/whiteboard-connect.h \ - ui/dialog/whiteboard-sharewithchat.cpp \ - ui/dialog/whiteboard-sharewithchat.h \ - ui/dialog/whiteboard-sharewithuser.cpp \ - ui/dialog/whiteboard-sharewithuser.h +## inkboard_dialogs = \ +## ui/dialog/whiteboard-connect.cpp \ +## ui/dialog/whiteboard-connect.h \ +## ui/dialog/whiteboard-sharewithchat.cpp \ +## ui/dialog/whiteboard-sharewithchat.h \ +## ui/dialog/whiteboard-sharewithuser.cpp \ +## ui/dialog/whiteboard-sharewithuser.h endif ink_common_sources += \

4 13

Re: [Inkscape-devel] [NEW] Icon theming
by Engelen, J.B.C. (Johan) 01 Mar '09

01 Mar '09

For clarity, my remarks are meant for Windows only. ----- Oorspronkelijk bericht ----- Van: J.B.C.Engelen@...1578... <J.B.C.Engelen@...1578...> Verzonden: woensdag 25 februari 2009 0:35 > -----Original Message----- > From: Krzysztof Kosiński [mailto:tweenk.pl@...400...] > Sent: dinsdag 24 februari 2009 23:09 > To: inkscape-devel(a)lists.sourceforge.net > Subject: Re: [Inkscape-devel] [NEW] Icon theming > > I guess you run Inkscape from the build tree without installing it. Of course. > Regardless where you run Inkscape from, it looks for icons > and other assets in the place it was installed. You need to > install a daily build from after the change so that the icon > files land in the appropriate places. Pretty sure Inkscape's daily builds cannot be installed. (it's just a zip of the build dir, afaik). > Otherwise it won't > work, just the way it wouldn't work if you built Inkscape and > tried to run the built executable without having it installed > in the regular location as well. I can put in some hacks to > allow Inkscape to see the icons from the source tree, but > this could make testing harder. Inkscape never needed installing; let's keep it that way.

5 6

Wiki cleanups
by Krzysztof Kosiński 27 Feb '09

27 Feb '09

I'd like to clean up the main page of the wiki a bit. It contains links to lots of outdated information. Some pages are also not needed anymore and can cause confusion, so I'd like to remove them. Can I have administrator access to the wiki? My login is "Tweenk". Regards, Krzysztof Kosiński -- View this message in context: http://www.nabble.com/Wiki-cleanups-tp22230154p22230154.html Sent from the Inkscape - Dev mailing list archive at Nabble.com.

2 2

Re: [Inkscape-devel] Guide editing by mouse
by LucaDC 26 Feb '09

26 Feb '09

Maximilian Albert-2 wrote: > > Hi, > > as a kind of test for some other things I have in mind I added better > support for editing guides by mouse. You will notice that the anchor > point of guides is now displayed on canvas as a small dot. You can > still move guides as you used to, but now you can also rotate them > around the anchor as well as move the anchor along the guide. What I'm > not really happy with, though, is the way in which the various > functionalities are accessed. So I'd like your help in this respect. > Currently it works as follows: > > 1) dragging the anchor moves the whole guide (and the anchor with it) > 2) pressing Shift and dragging the anchor moves it along the guide > (while the guide itself stays in place) > 3) dragging the guide anywhere outside the anchor rotates it around the > anchor > 4) pressing Shift and dragging the guide outside the anchor bypasses > rotation and moves the whole guide (as in 1.) > > Does this make sense to you? Do you have better suggestions as to > which functionality should be accessed in which way/with which > modifier? > > Thanks for your feedback, > Max > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by: > SourcForge Community > SourceForge wants to tell your story. > http://p.sf.net/sfu/sf-spreadtheword > _______________________________________________ > Inkscape-devel mailing list > Inkscape-devel(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/inkscape-devel > > These are my suggestions: 1) "normal"-selecting and dragging moves the whole guide (and the anchor with it); 2) shift-selecting the guide (in any place along it) moves the guide as in 1) but placing the anchor under the pointer, so you can snap it and place it wherever you want; 3) alt-selecting the guide outside the anchor rotates the guide around it (with ctrl fixed angles snapping); 4) alt-selecting the guide on the anchor moves it along the guide; 5) ctrl-clicking the guide, deletes it. Point 1) is intended to preserve the usual behavior. Point 2) is intended to make it easier to grab the anchor: guides are so "thin" for selecting that having also to get the little circle (not zoomable...) is a pain. And what about if some guides have their anchor all snapped to the same point? How could you select the one you want? Point 3) is for the great feature of rotating guides (with snapping!). Ctrl should be pressed after initiating the rotation, to distinguish from point 5) (deletion): if you start rotating a guide it means you don't want do delete it, don't you? Point 4) is not so essential to me, but could be useful and maybe not so difficoult to implement. Point 5) is the current behavior and should be kept as is. Tanks for all the improvements. -- View this message in context: http://www.nabble.com/Guide-editing-by-mouse-tp21666562p22180095.html Sent from the Inkscape - Dev mailing list archive at Nabble.com.

1 0

Tooltip on snapindicator is now zoom dependent?
by Diederik van Lierop 25 Feb '09

25 Feb '09

In rev. #20773 the distance of the snap-tooltip to the snap-indicating-cross has been made zoom-dependent by "speleo3". Now when I zoom in, snapping might occur at one end of the screen whereas the tooltip might show up at the other end of the screen. I think it should appear at a fixed distance from the snap-indicator, i.e. measured in hard screen pixels. Could you please explain why you think this is better? PS: Sorry for forgetting your real-name :-(. That's why I'm sending this to the dev-list. Diederik

2 2

Absence from Inkscape work
by Maximilian Albert 25 Feb '09

25 Feb '09

Dear fellow Inkscapers, on rather short notice I need to inform you that I won't be able to do any development work during the next 2-3 months. Also, I will have very little internet access (if at all) and therefore won't be receiving emails from the -devel list. I am aware that there are a couple of - in part quite substantial - things which I leave unfinished in the SVN repository and I truly apologize that due to my broken laptop (which left me with no personal computer at all during the last half-year) and both major upcoming changes in my life and a lot of very urgent research work for university, I so far haven't completed the tasks I was working on. I very much hope and am positive that things are going to be better in the second half of 2009 and I promise that I will complete all the unfinished stuff as soon as I can resume coding. Until then, please feel free to remove any code of mine which is not functional or not tidied up. You are also welcome to improve it but I will also do so when I'm back at my regular Inkscape work. For the guides stuff I committed a short while ago, I'm attaching a patch of recent work in progress which (partly) implements selecting and editing of multiple guides. You are welcome to clean it up and commit it - or to ignore it for now. Again, sorry for all the inconvenience. I'm very much looking forward to getting back up to speed with my work. Best regards, Max

4 3

svg filters crash
by Alexandre Prokoudine 25 Feb '09

25 Feb '09

Hi, For last couple of days Inkscape crashes whenever an SVG Filter from Filters menu is chosen. https://bugs.launchpad.net/inkscape/+bug/334050 BTW, we have 37 more bugs tagged with "crash". If we are planning to do a release this year, maybe we should encourage ourselves to clean up the mess or at least leave several wet floor signs around :) Alexandre

4 4

Export, Publish and Save As
by Martin Owens 25 Feb '09

25 Feb '09

Hi inkscapers, I was looking at a few bugs (#168504 and #168958) and thinking about some of my own personal grievances with the whole business of exporting and saving as. Currently in inkscape 0.46 (Ubuntu 8.10) there are a whole boat full of exporting, saving, loading menus in the File menu. Most of which seem to follow this logic: 1) File New/Load/Save * New > * Open ... * Open Recent > * Revert * Save * Save As ... * Save a copy ... 2) Import/Export * Import ... * Export Bitmap ... * Import from Open Clipart ... 3) Print ... 4) Vacuum Defs 5) Preferences * Document Properties ... * Document Meta Data ... * Inkscape Preferences ... * Input Devices ... 6) Application * Close * Quit This seems a bit of a mess, although I don't know if you've changed much for 0.47 so apologies if this has already been put through for refinement. My suggestions would be as follows: * Move Revert to Edit and have it as a function of the undo system. And/Or rename it to 'Reload from File' * Remove Save a Copy and replace with 'Publish ...' which would have a dialog specifically designed to export to pdf, plain svg or png and with options that make sense such as v1.1 svg, clean defs and no personal data (such as paths). * The document properties and meta data seem out of place, since they're more to do with the document object than the file object. Maybe a top level document menu? One that includes some of the edit menu items specific for the document? * Vacuum Defs seems like a plugin or something that could be a part of publish, or the doc menu. * Import and Export make sense, but perhaps having plugins that allow imports and exports to various places and removing the specific link for open clipart. Thoughts? Flames? Regards, Martin Owens

6 9

Conversion of circular arc to Bezier curve
by Alvin Penner 25 Feb '09

25 Feb '09

This is a follow-up to LP332735. In the file \src\sp-ellipse.cpp there is a formula for calculating the length of a Bezier arm when converting a circular arc to a Bezier curve. The formula reads: len = 0.552*(e-s)/M_PI_2 where (e-s) is the angle of the arc. I think the formula should read: len = 4*tan((e-s)/4)/3 I've created a patch for this, at https://bugs.launchpad.net/inkscape/+bug/332735 , but I'm reluctant to commit it, because I don't actually compile the code myself, I work only from the Windows nightly builds, so it may be a few days before I can test it. Would anyone be willing to confirm that this patch will not cause a crash, or is it okay if I just commit it? (As to the formula itself, it has already been tested in the file cubicsuperpath.py and it behaves as desired.) http://www.nabble.com/file/p22179587/sp-ellipse.diff sp-ellipse.diff -- View this message in context: http://www.nabble.com/Conversion-of-circular-arc-to-Bezier-curve-tp22179587… Sent from the Inkscape - Dev mailing list archive at Nabble.com.

3 3

Re: [Inkscape-devel] website
by Jarosław Foksa 24 Feb '09

24 Feb '09

Hey, I've been working on inkscape.org mockup, but just like Joshua I somehow couldn't finish it for several months... >Do we have a new design? Do we have anybody to work on new >website? It's still work in progress: http://wstaw.org/p/4e95/ Please give me 1 week to finish header and main menu icons, maybe this will make it look a bit cleaner. If you have any ideas how this layout could be improved further then feel free to share them here.

2 1