- Inkscape Devel - Inkscape Mailman

restrict directory access in kiosk mode?
by Stan 17 Nov '08

17 Nov '08

What is the best way to restrict opening/saving files to one directory in kiosk mode on a Linux console? I can edit and recompile if necessary. Thanks, Stan

2 1

Difficulties in backtracing a crash on XP
by Diederik van Lierop 17 Nov '08

17 Nov '08

Hi, Bug 292077 is giving me quite some difficulties in pin-pointing it. It crashes Inkscape, but I can only reproduce it on Windows (not on Linux), and only when I'm _not_ running gdb. To make things worse it even requires quite some patience to reproduce it. How does one find the cause of such a bug? I've tried attaching gdb after the crash (is that possible at all?), and sprinkled around lot's of std::couts, but I didn't get any closer. I could use some pointers here :-( Apparently it only crashes when snapping is enabled, but it looks like it's not the snapping code itself that's crashing. The bug report is here: https://bugs.launchpad.net/inkscape/+bug/292077 It's been around at least since v0.46, according to this report. Thanks, Diederik PS: If you want to have a try at reproducing it yourself, then please use revision 20049 or older. Newer revisions snap less often and are therefore more difficult to break.

5 9

Parallel build on Windows
by Diederik van Lierop 16 Nov '08

16 Nov '08

Hi, Can anyone tell me how to do a parallel build using mingw32 and btool on Windows? I've tried adding -j4 to build.xml, but that parameter is not being accepted. I'm bisecting, but this could be so much faster on my quadcore... Diederik

4 3

darme de baja
by Emilio Roberto Brizuela 16 Nov '08

16 Nov '08

desearía que me den de baja de esa lista. gracias Yahoo! Cocina Recetas prácticas y comida saludable http://ar.mujer.yahoo.com/cocina/

3 2

Inkscape cannot open *.svgz (compressed Inkscape) through File -> Open (command-line works ok though)
by Michael Park 15 Nov '08

15 Nov '08

Hi there, I noticed that Inkscape bails w/ an error message 'Failed to load the requested file <filename>.svgz' when trying to open a compressed Inkscape file through the GUI. However, it can still load the same file just fine if I pass it to inkscape through the command-line: $ # this works ok $ inkscape myfile.svgz ...when it errors out, I get the following error message on the command line: Entity: line 1: parser error : Start tag expected, '<' not found � ^ To reproduce: 1 - create a new file 2 - add a shape (I just did a simple red square) 3 - save as 'Compressed Inkscape SVG (*.svgz)' 4 - close and re-open inkscape GUI 5 - in the GUI, File -> Open <your saved file> // this will result in the error 6 - open same file through command-line // this will open ok I don't know how long this behavior has been around, I only started using compressed SVG's recently, but I see the behavior as far back as rev 20150.. I also keep rev 19967 handy (there seems to have been a performance regression since this build, when zooming in/out.. the canvas seems to refresh slower... but that's another matter altogether), and it suffers the same problem BOTH through the GUI and command-line. I'll try bisecting down to the neighbor revs that fixed the command-line opening problem when I get some time later on tomorrow. --Mike

2 5

Re: [Inkscape-devel] Adjusting DPIs for a document (S?bastien)
by Guillermo Espertino 15 Nov '08

15 Nov '08

Sebastien: You can work with inkscape's default units (px) and export your artwork at 90dpi from the png exporter and you'll get 1:1 conversion of vector pixels to raster pixels. The same applies to the image imports, inkscape will take the real pixels and place them on the work area using 90 dpi. Of course the feature that you're proposing is interesting and would be very helpful in several situations. This has been already discussed and if I remember correcly, there is a similar suggestion in the wishlist. Could you please check in the bug tracker if it has been already reported? If not, you can create a detailed feature request. Gez.

1 0

Darme de baja de la lista
by Emilio Roberto Brizuela 14 Nov '08

14 Nov '08

Hola. Desearía que me den de baja de esta lista. Gracias. ____________________________________________________________________________________ ¡Buscá desde tu celular! Yahoo! oneSEARCH ahora está en Claro http://ar.mobile.yahoo.com/onesearch

1 0

Grid snapping slowing down operations
by Sébastien 14 Nov '08

14 Nov '08

Hello, I'm using Inkscape grids extensively and some operations like resizing a rectangle or drawing a line using the pen tool push my CPU to 100% for 10 to 30s. The grid setup I use it the following: - Pixels - Origin: x=0.0, y=-15.0 - Spacing: x=2.0, y=2.0 - Step: 10 lines And then snapping is turned on for nodes and snaps to paths, nodes and guides with a distance of 1. I've been experiencing these slowdowns on two Ubuntu machines, and the problem still shows with the latest realase (8.10). I'm running Inkscape 0.46, built Oct 24 2008. -- Sébastien

2 1

Adjusting DPIs for a document
by Sébastien 14 Nov '08

14 Nov '08

Hello, I'm doing UI design using Inkscape and it is important for me to be able to adjust the DPI on a per-document basis. In practice, I want to be able to adjust the number of pixels per inch (or cm) so that I can make UI wireframes bigger or smaller without losing the pixel-precision. -- Sébastien

1 0

Re: [Inkscape-devel] Parallel build on Windows
by Diederik van Lierop 13 Nov '08

13 Nov '08

Hi Jasper, Probably you intended to send this message to the dev-list too? Thanks for your info on gcc vs. make. Probably Bob will comment on this. Anyway, Eclipse already has the automatic build option you described. When I first tested it two years ago it didn't run very smoothly for large projects such as Inkscape, but things might have improved (at least my CPU has), so maybe I should try it again. Diederik > -----Original Message----- > From: Jasper van de Gronde [mailto:th.v.d.gronde@...528...] > Sent: 2008 nov 13 9:18 > To: mail@...1689... > Subject: Re: [Inkscape-devel] Parallel build on Windows > > Diederik van Lierop wrote: > > Hi, > > > > Can anyone tell me how to do a parallel build using mingw32 and btool on > > Windows? I've tried adding -j4 to build.xml, but that parameter is not > > being accepted. > > I think this is actually a parameter of make, not gcc. That means that > buildtool should be modified to allow for running multiple processes > simultaneously. Not impossible, but definitely tricky (ideally you'd > have to handle the GCC output gracefully for example). > > > I'm bisecting, but this could be so much faster on my quadcore... > > I know what you mean :) I'm currently in a similar situation with > Matlab, it's so frustrating to have it only run one test at a time... > (Especially since the full set of tests takes more than a week to complete.) > > On a related note, I've often wondered whether there isn't some build > system that tries to keep your build up-to-date while you're editing. So > something that sits in the background, keeping an eye on all the source > files, and once something is saved it tries to compile it (and/or > anything that depends on it). > > Obviously compiling would not actually be faster, but it might reduce > the time you have to wait, especially if you're making large changes > (editing multiple files), as you can just continue to do all sorts of > other things while the build is being kept as up-to-date as possible > behind your back.

2 1