November 2009 - Inkscape Devel

please provide support for graphicsmagick
by Dennis Heuer 29 Nov '09

29 Nov '09

hello inkscape supports imagemagick, which is nowadays usable but had a lot of issues. this is why i switched to graphicsmagick, a faster and more reliable (maintained) port of it. please consider supporting graphicsmagick. except of the names, both expose the same api. many thanks -- GorgonZola <gorgonzola@...1955...>

3 2

inkscape vs. vanilla system
by unknown＠example.com 29 Nov '09

29 Nov '09

seems that inkscape doesn't like to install on an up-to-date vanilla system. it relies too much on distro defaults. first, python is not found because the path searched at is not existing. it is not mentioned in any file on my system. python-config doesn't spit it out either: configure:9578: g++ -o conftest -g -O2 -fopenmp -Werror=format-security -Wall -Wformat -Wformat-security -W -D_FORTIFY_SOURCE=2 -Wl,-z,relro conftest.cpp -lgc /opt/development/python-2.5/lib/python2.5/config/libpython2.5.so -lpthread -ldl -lutil >&5 g++: /opt/development/python-2.5/lib/python2.5/config/libpython2.5.so: No such file or directory the point is that "python2.5/config/" is a redundant fiction. also, i re-installed poppler with support for the unsupported xpdf headers. inkscape still didn't compile. then i turned off poppler support, which was also confirmed in the configuration overview. however, it is still used. and, the way it is used seems to be targeting at an older version: extension/internal/pdfinput/pdf-parser.cpp: In member function 'void PdfParser::opSetExtGState(Object*, int)': extension/internal/pdfinput/pdf-parser.cpp:812: error: no matching function for call to 'GfxColorSpace::parse (Object*)' /usr/include/poppler/GfxState.h:182: note: candidates are: static GfxColorSpace* GfxColorSpace::parse(Object*, Gfx*) extension/internal/pdfinput/pdf-parser.cpp: In member function 'void PdfParser::opSetFillColorSpace(Object*, int)': extension/internal/pdfinput/pdf-parser.cpp:1012: error: no matching function for call to 'GfxColorSpace::parse (Object*)' /usr/include/poppler/GfxState.h:182: note: candidates are: static GfxColorSpace* GfxColorSpace::parse(Object*, Gfx*) extension/internal/pdfinput/pdf-parser.cpp:1014: error: no matching function for call to 'GfxColorSpace::parse (Object*)' /usr/include/poppler/GfxState.h:182: note: candidates are: static GfxColorSpace* GfxColorSpace::parse(Object*, Gfx*) extension/internal/pdfinput/pdf-parser.cpp: In member function 'void PdfParser::opSetStrokeColorSpace(Object*, int)': extension/internal/pdfinput/pdf-parser.cpp:1035: error: no matching function for call to 'GfxColorSpace::parse (Object*)' /usr/include/poppler/GfxState.h:182: note: candidates are: static GfxColorSpace* GfxColorSpace::parse(Object*, Gfx*) extension/internal/pdfinput/pdf-parser.cpp:1037: error: no matching function for call to 'GfxColorSpace::parse (Object*)' /usr/include/poppler/GfxState.h:182: note: candidates are: static GfxColorSpace* GfxColorSpace::parse(Object*, Gfx*) extension/internal/pdfinput/pdf-parser.cpp: In member function 'void PdfParser::opSetFillColorN(Object*, int)': extension/internal/pdfinput/pdf-parser.cpp:1104: error: no matching function for call to 'GfxResources::lookupPattern (char*)' /usr/include/poppler/Gfx.h:113: note: candidates are: GfxPattern* GfxResources::lookupPattern(char*, Gfx*) extension/internal/pdfinput/pdf-parser.cpp: In member function 'void PdfParser::opSetStrokeColorN(Object*, int)': extension/internal/pdfinput/pdf-parser.cpp:1148: error: no matching function for call to 'GfxResources::lookupPattern (char*)' /usr/include/poppler/Gfx.h:113: note: candidates are: GfxPattern* GfxResources::lookupPattern(char*, Gfx*) extension/internal/pdfinput/pdf-parser.cpp: In member function 'void PdfParser::opShFill(Object*, int)': extension/internal/pdfinput/pdf-parser.cpp:1546: error: no matching function for call to 'GfxResources::lookupShading (char*)' /usr/include/poppler/Gfx.h:114: note: candidates are: GfxShading* GfxResources::lookupShading(char*, Gfx*) extension/internal/pdfinput/pdf-parser.cpp: In member function 'void PdfParser::doImage(Object*, Stream*, GBool)': extension/internal/pdfinput/pdf-parser.cpp:2510: error: no matching function for call to 'GfxColorSpace::parse (Object*)' /usr/include/poppler/GfxState.h:182: note: candidates are: static GfxColorSpace* GfxColorSpace::parse(Object*, Gfx*) extension/internal/pdfinput/pdf-parser.cpp:2595: error: no matching function for call to 'GfxColorSpace::parse (Object*)' /usr/include/poppler/GfxState.h:182: note: candidates are: static GfxColorSpace* GfxColorSpace::parse(Object*, Gfx*) extension/internal/pdfinput/pdf-parser.cpp: In member function 'void PdfParser::doForm(Object*)': extension/internal/pdfinput/pdf-parser.cpp:2770: error: no matching function for call to 'GfxColorSpace::parse (Object*)' /usr/include/poppler/GfxState.h:182: note: candidates are: static GfxColorSpace* GfxColorSpace::parse(Object*, Gfx*) i now tried the compilation process several times, always getting stuck, and always getting stuck after about half an hour. possibly you should port inkscape to "go" to make it break faster. also, if anybody wants to help me in this case, your surname should not be alexandre. many thanks. -- GorgonZola <gorgonzola@...1955...>

2 1

lp:inkscape should be operational
by Ted Gould 29 Nov '09

29 Nov '09

Hey all, Sorry to take so long on this. But, it turns out when you mess up one little thing -- you need to regen everything -- and that sucks :) Currently there is a trunk branch from SVN in Launchpad and associated with the name "lp:inkscape". The other branches are currently uploading, and are likely to be available tonight. I created a group for Inkscape developers: inkscape.dev[1]. Anyone in that group should have access to trunk. Anyone in the inkscape.admin[2] team should be able to add people, so if you have commit access in SF currently, grab someone on Jabber/IRC and get added to the inkscape.dev group. If you want, you can get the same effect of the -cvs mailing list by subscribing to the trunk branch. You can then edit your e-mail settings for what mail you want to get.[3] Lastly, some people might find the 5-minute tutorial on Bazaar.[4] --Ted [1] https://launchpad.net/~inkscape.dev [2] https://launchpad.net/~inkscape.admin [3] https://help.launchpad.net/Code/FindingAndDownloading#Staying%20up% 20to%20date [4] http://doc.bazaar-vcs.org/latest/en/mini-tutorial/index.html

2 2

need help: trying to compile 047 X11 for Tiger
by Wolf Drechsel 29 Nov '09

29 Nov '09

Hello everybody, people who asked me to compile 0.47 X11 for Tiger did probabely not know what a bad idea that was - because things tend to be done much faster by oneself than when teaching a complete ignorant is required… - Nevertheless, I feel honoured by the request and regret having to bother all you with another set of childish questions. What I did up to now: I set up my machine and compiled 0.47 aqua, the description given here: http://wiki.inkscape.org/wiki/index.php/ CompilingMacOsX#Building_Aqua_November_2009 should be fairly accurate. Now I'd like to set up another tree for a X11 version, trying to follow this: http://wiki.inkscape.org/wiki/index.php/ CompilingMacOsX#Installing_a_second_Macports_tree_. 28recommended_approach.29 - but just the other way round - as my aqua building environment was the first in place. This is what the instructions say: > Installing a second Macports tree (recommended approach) > Rather than deactivating and reactivating ports, you can also keep > two MacPorts trees side by side, provided you install the second > one from source. Let say I want to install a new tree for native > versions in /opt/local/native, I would do > Right. I created a /opt/local/x11 instead > export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin > cd ~/MacPorts-1.x.x/ This is the first place to stumble - I dont have a ~/MacPorts- whatever, allthough the latest macports is installed. What's going wrong here? > ./configure --prefix=/opt/local-native --with-tclpackage=/Library/ > Tcl/macports-native make sudo make install Next stumble - I learned that the osx-build.sh script can do nearly everything. So does it make sense to call configure? > You can set this second tree up to always build packages with > specific variants. For example, you can edit the /opt/local-native/ > etc/macports/variants.conf file to have the following line: > > +universal +no_x11 +quartz O.k. - created a /opt/x11/etc/macports/variants.conf containing +x11 > You can remove the +universal if you only want to build inkscape > for your host architecture. You may also need to set alternate > applications_dir and frameworks_dir variables in the /opt/local- > native/etc/macports/macports.conf > There is not such a file. I can create /opt/x11/etc/macports/ macports.conf, but > file so that applications and frameworks install by this macports > (for example by python) don't clash with your standard macports tree. > … not the shadow on an idea what that means… > Then you need to have only one version of the port command in the > path at any time so you need to setup your .bashrc > (or .bash_profile or .profile) accordingly. I use shell aliases to > quickly and temporarily switch to the universal version: > > alias portpathregular="export PATH=/opt/local/bin:/opt/local/sbin:/ > Developer/Tools:/usr/local/bin: \ /usr/X11R6/bin:/bin:/sbin:/usr/ > bin:/usr/sbin" alias portpathnative="export PATH=/opt/local-native/ > bin:/opt/local-native/sbin:/Developer/Tools:/usr/local/bin: \ /usr/ > X11R6/bin:/bin:/sbin:/usr/bin:/usr/sbin" o.k. - that was easy. Inbetween I try to install the x11 variants of cairo +x11 pango +x11 poppler +x11 gtk2 +x11… As the patient reader, who came down to this place in my opus may have noticed - there is a big lack of fundamental knowledge here. So if anybody would be kind enough to give me further instructions on the questions mentioned above, mainly in what way the osx-build-sh can be part of it - I'd be grateful. Yours, Wolf

2 1

Release Notes for 0.48
by Joshua A. Andler 29 Nov '09

29 Nov '09

Hey All, As usual, if you add new features or fix really noteworthy bugs, please add appropriate information to the Release Notes page. I started the 0.48 page here: http://wiki.inkscape.org/wiki/index.php/ReleaseNotes048 Cheers, Josh

1 0

Re: [Inkscape-devel] [Inkscape-user] Inkscape 0.47 is released!
by JiHO 28 Nov '09

28 Nov '09

On Wed, Nov 25, 2009 at 02:12, Gary Hawkins <dragonlord666@...400...> wrote: > I know it's known of, just wondering if a solution was n the horizon. > I did try installing python but guess I don't know what I'm doing as it > didn't work LOL I will try to fix that next week. JiHO --- http://maururu.net

2 1

Re: [Inkscape-devel] lp:inkscape should be operational
by Josh Andler 28 Nov '09

28 Nov '09

Woohoo! Thank you Ted! I have added most of our regular contibutors already to the dev team on lp. Going to go checkout... On Nov 28, 2009 12:42 PM, "Ted Gould" <ted@...11...> wrote: Hey all, Sorry to take so long on this. But, it turns out when you mess up one little thing -- you need to regen everything -- and that sucks :) Currently there is a trunk branch from SVN in Launchpad and associated with the name "lp:inkscape". The other branches are currently uploading, and are likely to be available tonight. I created a group for Inkscape developers: inkscape.dev[1]. Anyone in that group should have access to trunk. Anyone in the inkscape.admin[2] team should be able to add people, so if you have commit access in SF currently, grab someone on Jabber/IRC and get added to the inkscape.dev group. If you want, you can get the same effect of the -cvs mailing list by subscribing to the trunk branch. You can then edit your e-mail settings for what mail you want to get.[3] Lastly, some people might find the 5-minute tutorial on Bazaar.[4] --Ted [1] https://launchpad.net/~inkscape.dev [2] https://launchpad.net/~inkscape.admin [3] https://help.launchpad.net/Code/FindingAndDownloading#Staying%20up% 20to%20date [4] http://doc.bazaar-vcs.org/latest/en/mini-tutorial/index.html ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Inkscape-devel mailing list Inkscape-devel(a)lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel

1 0

Local Coordinates for group transformations?
by Rob Antonishen 28 Nov '09

28 Nov '09

Does the SVG specification limit local co-ordinate systems for transformations, or is it a function of the UI (i.e. Inkscape itself). Specifically, if I take a number of objects and group them, then scale, rotate, and/or skew the group, I would like to be able to step into the group and perform operations that also run through the same transforms. For example, if I group several orthogonal squares together, then rotate the group, I would like to be able to step into the group, select one of the squares and scale it non-uniformly into a rectangle. Currently, it will deform into a rhombus. The results I am looking for can be achieved in the current Inkscape be making a clone of the group, then scaling, rotating and/or skewing the clone. I can then go back and modify the source and the expected result happens. This, however, is very awkward, as I need to keep the originals all parked off page and can't accurately change the shapes by eye to get things lined up. SVG spec supports viewports and I got real close by following these steps: I opened up the xml editor and selected the group node for layer 1 and added a new "element node" that I set as svg:svg i then dragged the group I want to transform INTO the node. You can select the svg:svg element and apply a rotation (or translation, but only one...so use rotation). Now right click and enter svg2912. Click into the group object. You can now translate or scale the elements of the group orthogonally! I.e. if you cursor right, it moves in positive X direction of the original object, not the rotated one. Essentially everything inside the svg:svg element has a different axis than the page. Now the big problem. Inkscape will not respect the rotation of the svg:svg node when loading the savd file, so the object moves. Any suggestions? Is this a feature request? is support of the svg:svg viewport element? Thanks in advance- -Rob A>

2 1

Re: [Inkscape-devel] https://bugs.launchpad.net/inkscape/+bug/375176
by unknown＠example.com 27 Nov '09

27 Nov '09

<snip> 2009/11/25 <gorgonzola@...1955...>: > the described error still occurs with inkscape 0.47 and all newest dependencies. any hints? I think you might have an obsolete version of poppler headers in /usr/local. It is a build system bug that Inkscape configures at all in such a situation... Regards, Krzysztof </snip> many thanks so far i deleted the old installation and installed the latest version. now i get this error: In file included from extension/init.cpp:39: extension/internal/pdfinput/pdf-input.h:38:20: error: PDFDoc.h: No such file or directory dennis

5 15

dmg for Snow Leo
by Alexandre Prokoudine 27 Nov '09

27 Nov '09

Hi, A user asks if there will be a DMG for Snow Leopard. He has 10.6.2 and latest X11 from Apple. 0.47 crashes upon start for him. Alexandre

3 2