- Inkscape Devel - Inkscape Mailman

Blur spinner digits
by Guillaume Pothier 21 Nov '07

21 Nov '07

Hi, I've just checked out the SVN trunk to play with the new "huge bitmap export" feature, which is really cool! So, I have a rather large page (70x150cm) which I'm exporting at 100dpi. There is an image in my drawing, which is relatively low resolution compared to what I am exporting, so I want to blur it a bit so that it doesn't appear so pixellized in the output. The issue is that the blur control in the Fill & stroke dialog doesn't let me enter very low blur values. Or to be more precise, I can enter a small value like 0.03, the drawing is repainted with the exact level of blurring I want, but then when I do anything else the blur value goes back to 0. This is because the precision of the blur's spin is set to 1 digit (filter-effect-chooser.cpp:28). I changed it to 2 digits, and it now lets me enter a low blur value. Is it a good idea? Should I submit a patch? g

1 0

Re: [Inkscape-devel] [Inkscape-user] NEW: Live Path Effects
by unknown＠example.com 21 Nov '07

21 Nov '07

I just renamed the Path along Path LPE to Bend Path. I also changed this name in the Inkscape SVG representation. This means that your old files that used this effect no longer work. Reapplying the effect will not work as it will reinitialize some things. What you should do is go to the effect in the XML editor (in the defs section) and reset the effect attribute from 'path_along_path' to 'bend_path'. Sorry for the inconvenience :/ (note that the LPE still change a bit because of bug fixes. e.g. recently translation of things was changed, so your paths would be in the wrong place) - Johan > -----Original Message----- > From: bulia byak [mailto:buliabyak@...400...] > Sent: woensdag 21 november 2007 22:38 > To: Inkscape User Community; Engelen, J.B.C. (Johan) > Subject: Re: [Inkscape-user] NEW: Live Path Effects > > On Nov 21, 2007 5:25 PM, <J.B.C.Engelen@...1578...> wrote: > > About the naming: perhaps I can at least settle on renaming 'path > > along path' to 'bend'. (the two names are so similar at the moment > > that even I misread things often...) > > Me too :) > > And please rename "stitch subcurves" - we don't have > subcurves in Inkscape, we have subpaths. > > -- > bulia byak > Inkscape. Draw Freely. > http://www.inkscape.org >

1 0

lib2geom status
by Ted Gould 21 Nov '07

21 Nov '07

Hey, Now that we're including a large part of lib2geom for LPE anyway; what else can we use it for? I'm unsure of the status of the whole library. One feature that I hear alot about when talking to people is the inset/outset function in Inkscape being "less than perfect." I think this was on the TODO for lib2geom, is it done? Thanks, Ted

5 11

Names of LPEs
by unknown＠example.com 21 Nov '07

21 Nov '07

Hi all, Because people are starting to use LPE and perhaps make tutorials? ;) I'd like to settle on the names for these two effects: They are now called: Path along path and Pattern along path in SVN. I think I'll keep one named Pattern along path (in svg now it is called "skeletal"); this one mimics the extension. The original path is some curved path. And it has a path *parameter* that is taken as a pattern and bent along the original path. The other one, I am thinking about "Bend path". The original path is the fish. And it has a path parameter that defines the curvature / the path along which to bend the fish, i.e. the now called 'bend path' parameter. Picking a sensible name is important for inkscape's svg. The UI text can be changed, the SVG text not. (because it would break people's files) Thanks a lot for your input, Johan

4 10

libwpg error in compile
by Joshua Facemyer / Impressus Art 21 Nov '07

21 Nov '07

Anyone know why I get this error during compile? Make[2]: *** No rule to make target `extension/internal/libwpg/Makefile_insert', needed by `Makefile.in'. Stop. pygmee mentioned on irc today he was getting the same thing. I know libwpg was separated out a few weeks ago - how do I get around this? JF

4 7

Re: [Inkscape-devel] Inkscape demo import
by Bryce Harrington 21 Nov '07

21 Nov '07

On Wed, Nov 21, 2007 at 01:44:32PM +0900, James Henstridge wrote: > [adding inkscape-devel back to the CC list] > > On 19/11/2007, James Henstridge <james@...1829...> wrote: > > On 15/11/2007, James Henstridge <james@...1829...> wrote: > > > On 15/11/2007, Bryce Harrington <bryce@...961...> wrote: > > > > Hi James, > > > > > > > > Hope your flight home wasn't too insane (but I'm guessing it was!) > > > > I just wanted to check in with you on the Inkscape import, and see if > > > > there's anything more we could do to assist. > > > > > > I took a few days off after allhands, so only arrived back home this > > > morning. I'll try and get you a new demo import soon. The main tasks > > > are: > > > 1. figure out what happened to the rest of the bug reports > > > 2. modify the importer to match your status/importance/category usage. > > > > Hi Bryce, > > > > I've updated the demo import of the Inkscape bugs. The missing bugs > > were due to a faulty download of one SF.net bug report that I did not > > catch. > > > > I've updated the group, importance and status handling to match your > > requirements. Please tell me whether it looks okay now. > > > > https://bugs.demo.launchpad.net/inkscape/ Hi James, I did some spot checks, and yes it now looks okay. The bug counts look like they now match up fine, and the bug states look like they've mapped well. > Assuming this import looks okay, what sort of time frame do you want > for the migration? We're now ready to go forward at your convenience. > There are a few timing constraints on our side that need to be taken > into account: > > 1. We are rolling out a new version of the Launchpad code base this > week, and I don't think there will be time to complete a migration > before that happens. So the earliest will be next week. Understood. > 2. The migration process depends on screen scraping SourceForge.net. > If you scrape SF.net too fast, they block your IP address. So it will > take a number of hours to get a fresh dump (I won't have to > re-download the attachments this time though). > If it is possible to disable filing of new bugs before the migration, > that would also be help reduce the chance of lost bug reports. Certainly. I've looked into this. It is possible to cause the bug tracker (and RFE's, patches) to be "hidden" so people can no longer submit to them. It does not appear to be possible to "lock" them but leave them visible. Because of this, I think the best approach would be for you to give me an indication of roughly when you'll be able to start the migration. I will then plan on hiding all of SourceForge's trackers for Inkscape and then email you a go-ahead. You can then run the screen scrapers and then bring up the new bug tracking at Launchpad. Meanwhile, we can let our users know of the downtime, and work on repointing our website bug tracker links to Launchpad. Hopefully then we'll be good to go! Thanks again! Bryce

1 0

separate RSS feeds
by Alexandre Prokoudine 20 Nov '07

20 Nov '07

Hi, Not sure this is the right list, but here goes: is it possible to have a separate RSS feeds for each available langauge? Currently news are available in cs, de, en, es, fr, it and ru. Alexandre

1 0

windows tablet bug
by bulia byak 20 Nov '07

20 Nov '07

Look at this diff: http://wiki.inkscape.org/wiki/index.php?title=FAQ&curid=140&diff=16864&oldi… Does anyone have any idea for fixing this? Has anyone contacted GTK folks? I'm not in the game as I don't develop on Windows, and when I reboot into win2000 my tablet works just fine. -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org

2 2

win23 build broken: poppler link problem
by unknown＠example.com 20 Nov '07

20 Nov '07

Hi all, I am trying to clean build 16528 but I get the following linker error: Make error line 373: LINK problem: build\libinkscape.a(pdf-input.o):pdf-input.cpp:(.text+0x2c8): undefined reference to `poppler_document_get_page' build\libinkscape.a(pdf-input.o):pdf-input.cpp:(.text+0x2d6): undefined reference to `poppler_page_render' build\libinkscape.a(pdf-input.o):pdf-input.cpp:(.text+0x2ba8): undefined reference to `poppler_document_new_from_file' build\libinkscape.a(pdf-input.o):pdf-input.cpp:(.text+0x4f7b): undefined reference to `poppler_document_new_from_file' collect2: ld returned 1 exit status I am using the latest devpackage from modevia.com: http://inkscape.modevia.com/win32libs/devlibs-2.12-071115.7z -Johan

3 4

Broken Autopackage builds
by Nicu Buculei 20 Nov '07

20 Nov '07

Since I upgraded my system to Fedora 8 a couple of weeks ago I am unable to use the Autopackage development builds anymore. It installs, claim the dependencies are satisfied but won't start due to missing libraries, here are a few examples: - it want libMagick++.so.9 (and I have libMagick++.so.10); - it want libMagick.so.9 (and I have libMagick.so.10); - it want libWand.so.9 (and I have libWand.so.10); - it want libtiff.so.4 (and I have libtiff.so.3) and maybe some more, I just gave up at libjasper-1.701.so which I don't have at all (I have only libjasper.so). Wasn't Autopackage supposed to have some kind of dependency checker? -- nicu :: http://nicubunu.ro :: http://nicubunu.blogspot.com Open Clip Art Library: http://www.openclipart.org my cool Fedora wallpapers: http://fedora.nicubunu.ro/wallpapers/ my clipart collection: http://clipart.nicubunu.ro/

1 0