- Inkscape Devel - Inkscape Mailman

Problem with gtk?
by Joshua Facemyer / Impressus Art 27 Jan '07

27 Jan '07

I've had a problem with inkscape fairly frequently when I start it the first time after starting X (I use XFCE on gentoo). It doesn't happen every time, but frequently, and if I restart X, it usually goes away. The problem is that I can't actually edit anything on the canvas, whether I open a new file or an existing one. All the buttons and dialogs behave correctly - except they don't do anything on the canvas. Is this a known problem? It's persistent for me through several versions, and I'm using both .44 and .45-pre1. Right now, however, I've just upgraded to XFCE4.4 and gtk2+-2.10.9 and I can't edit the canvas at all in either version, even after rebooting the whole computer. I'm not sure if I should recompile inkscape, but it doesn't seem right (I upgraded gtk from a previous 2.10 version, not sure exactly which). I searched bugs and didn't see anything like this. Thanks. JF

2 2

textual problems in release 0.45 branch
by Arpad Biro 27 Jan '07

27 Jan '07

Hi, Found more textual problems in the release branch. I also have a few questions regarding certain strings. untranslatable strings ---------------------- "Note: The file extension is appended automatically." ("Extract One Image" extension) "This effect measures the length of the selected path..." ("Measure Path" extension) "Requires two selected paths. The second must be exactly four nodes long." ("Envelope" extension) "Fractalize" ("Fractalize" extension) "Subdivisions" "Smoothness" "This effect bends a pattern object..." ("Pattern along path" extension) "Single" "Single, stretched" "Repeated" "Repeated, stretched" "Snake" "Ribbon" appears in English, even if translated -------------------------------------- "None" (fill/stroke widget on toolbar, status bar and in prefs) "Unset" "The following functions are available:..." ("Function Plotter" extension) questions --------- "Trace along the boundaries of reduced colors" -- does "reduced colors" mean "less colors" here? "RGB Barrel" -- what does it mean? "Isotropic scaling (uses smallest: width/xrange or height/yrange)" -- does this mean: "use the smaller of those two values"? "Scale Factor (Drawing:Real Length) = 1:" -- what does "(Drawing:Real Length) = 1" mean? "Text Outline File" -- what's a "text outline"? Arpad Biro ____________________________________________________________________________________ We won't tell. Get more on shows you hate to love (and love to hate): Yahoo! TV's Guilty Pleasures list. http://tv.yahoo.com/collections/265

4 4

Inkscape Booth at SCALE
by jtaber 27 Jan '07

27 Jan '07

First, does anyone else who cannot make it have any good slides they would like us to show at either the booth or BOF ? Especially on advanced features ? Booth notes: 1) Let's remember to bring a digital camera this year to post some booth photos (I'll try to remember to bring mine). 2) Any luck with drawing tablets ? 3) I'll bring my old LCD projector - does anyone have a better one ? 4) Let's all remember to bring power strips. 5) Does anyone have a 19" monitor ? If Wal-Mart still has them on sale for $199 maybe I'll get one. 6) our BOF is scheduled for Sat night 19:00 - 20:00. Shall we plan our dinner for Fri or Sat after BOF ? or both :) 7) We need to turn in our list of booth (free pass) volunteers. So far it looks like Ted, Josh, and myself. Anyone else coming ? Jon Cruz ? Ted, did you need a booth pass or do you get one as a featured speaker ? Josh, does your wife need a full pass or just an expo pass ?

5 5

Inkscape 0.45-pre2 Released
by Bryce Harrington 27 Jan '07

27 Jan '07

The second preview release of Inkscape 0.45 is now released. The changes between pre1 and pre2 are mostly translations plus a few bugfixes. Hopefully we will not need any further pre-releases before the final release. Bryce On Fri, Jan 19, 2007 at 04:35:41PM -0800, Bryce Harrington wrote: > Hi all, > > Our first official preview release of Inkscape 0.45 is now available for > download: > > https://sourceforge.net/project/showfiles.php?group_id=93438&package_id=991… > > Note that I've just posted the source package; hopefully soon packagers > will begin uploading packages for specific platforms. > > This release is intended for beta testers. There will be no further > functional change between this and the 0.45 final release. Expected > changes after this include translations, bug fixes, and packaging > cleanup. > > Please give it a try, and if you spot issues please make sure they are > listed in our bug tracker. > > Thanks! > Bryce

1 0

Re: [Inkscape-devel] Xara and Inkscape comparison on Linux ActionShow
by Jon Phillips 26 Jan '07

26 Jan '07

Yes, this would be superior functionality. Also, would be good for the color of the mask outline to correspond to a generic layer color. So, similar to illustrator, each of our layers should have corresponding selection color which we could use for this type of notification. Also would be great to have ui to allow for selection of this layer selection color. What do you guys think? Jon -----Original Message----- From: "MenTaLguY" <mental@...3...> To: "bulia byak" <buliabyak@...400...> Cc: "Joshua A.Andler" <joshua@...533...>; "Jon Phillips" <jon@...235...>; "Inkscape Devel List" <inkscape-devel(a)lists.sourceforge.net>; "Bryce Harrington" <bryce@...961...> Sent: 1/25/2007 11:03 AM Subject: Re: [Inkscape-devel] Xara and Inkscape comparison on Linux ActionShow On Thu, 25 Jan 2007 14:40:45 -0400, "bulia byak" <buliabyak@...400...> wrote: > In a similar vein, we should enable the Node tool to edit both the > object itself and its clipping path at the same time, probably > displaying the clippath with a different color/shape of nodes. I really like this idea. We should probably also draw the outline of the clipping path shape when editing. -mental

3 2

Gradient tool
by unknown＠example.com 26 Jan '07

26 Jan '07

If you find yourself with some offtime, I'd like you to check out my work on the gradient tool for 0.46. I fixed the crashes, so it's actually worth a look now! :D Go to the wiki page Josh made, and add whatever you like. http://wiki.inkscape.org:8080/wiki/index.php/Inkscape/gradientgoodness (I reckon a complete clean build is necessary after patching with my diff, but not sure) Cheers, Johan

4 5

Re: [Inkscape-devel] [Inkscape-translator] Inkscape 0.45 Hard Freeze & String Freeze
by Arpad Biro 26 Jan '07

26 Jan '07

Hi, > I would also like at this time to declare String Freeze, to assist > translators in finalizing their translations. If there are any > remaining string issues such as non-translatable strings or fixes to > existing strings, please send patches in ASAP. I made a bug report of all string problems I'm aware of: http://sf.net/tracker/index.php?func=detail&aid=1645093&group_id=93438&atid… Could other translators please check if they also see the "string translated, but appears in English" problems described there? Plus I have the following questions for translation: "Trace along the boundaries of reduced colors" (in "Trace bitmap" dialog) -- does "reduced colors" mean "less colors" here? "Isotropic scaling (uses smallest: width/xrange or height/yrange)" (in "Function Plotter" extension) -- does this mean: "use the smaller of those two values"? "Scale Factor (Drawing:Real Length) = 1:" (in "Measure Path" extension) -- what does "(Drawing:Real Length) = 1" mean? "Text Outline File" (in "Outline 2 SVG" extension) -- what's a "text outline"? Arpad Biro ____________________________________________________________________________________ Finding fabulous fares is fun. Let Yahoo! FareChase search your favorite travel sites to find flight and hotel bargains. http://farechase.yahoo.com/promo-generic-14795097

2 1

Inkscape 0.45 Release Plan
by Bryce Harrington 26 Jan '07

26 Jan '07

With the completion of the Bug Hunt, we are nearly ready to move to Feature Freeze, however there are a few tasks we must complete first: Frost: *** + (DONE) Wrap up development work + Select an about screen + Release Notes is 90% filled in + (DONE) Bug Hunt: 300 points + Identify the Release Wardens for 0.45 + Post inkscape-0.45pre0.tar.gz Feature Freeze: + SVN is branched + No further development work on release branch + Focus on critical bug fixing + Finalize all tutorials, docs, extensions, etc. + Translators create translations + Inkscape must pass 'make distcheck' + Packagers encouraged to test package creation + Post inkscape-0.45pre1.tar.gz Hard Freeze: + Focus on 'MUST FIX' bug fixing + Finalize translations + Finalize release notes + Test installation of packages for all major platforms + Post inkscape-0.45pre2.tar.gz Release + Final verification of late work, packaging, release notes, etc. + Post inkscape-0.45.tar.gz + Post packages for major platforms + Post official announcements Bryce

7 12

attention windows packagers
by bulia byak 26 Jan '07

26 Jan '07

There are two issues that must be addressed in the next prerelease. 1. We need GTK at least version 2.10.7. Reason: in that version they fixed bug which causes a pretty bad crash in Inkscape: 374378 Crash as GTK tries to blink cursor in defocused spinbutto... Take the latest from http://ftp.gnome.org/pub/GNOME/sources/gtk+/2.10/. 2. We really need to package numpy (numeric python) with python on windows, otherwise the perspective extension does not work. Thanks! -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org

3 9

Re: [Inkscape-devel] Xara and Inkscape comparison on Linux ActionShow
by MenTaLguY 25 Jan '07

25 Jan '07

On Thu, 25 Jan 2007 13:10:01 -0600, Aaron and Sarah Spike <spike@...749...> wrote: > The ability to draw those outlines will also be useful for blurred > objects and objects that have live path effects applied. :-) One thing we will need to be aware of, though, is that the render-only-the-displayed-portion-of-the-path optimizations apply only to NRArenaShape, not SPCanvasBPath (which is currently what we have to use for "annotations" like nodes and these hypothetical outlines). Kind of a shame since the two classes do essentially the same thing, and one of the reasons I think the canvas code needs to have the two layers unified somehow. -mental

3 3

Re: [Inkscape-devel] Xara and Inkscape comparison on Linux ActionShow
by bulia byak 25 Jan '07

25 Jan '07

On 1/25/07, Aaron and Sarah Spike <spike@...749...> wrote: > The ability to draw those outlines will also be useful for blurred > objects and objects that have live path effects applied. :-) Yes, and it's been in a todo list for a long time as well. Should not be terribly difficult though, we already have the necessary building blocks, just combine them. -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org

1 0

INX definition of description text
by unknown＠example.com 25 Jan '07

25 Jan '07

Clearifying labels in an extension's UI are now defined in INX like: <_param name="cmdlinename" type="description">The description</_param> The external program, e.g. python, is called with a list of commandline options, among which: --cmdlinename="The description" I think this is not desired and that there are no cases where this cmdline option is actually used. funcplot.inx for example has a huge description parameter. The description isn't really a parameter; should we recode this to enable a syntax like: <_description>The description</_description> Or <label> or something else. (underscores to make it translatable, which is sometimes not necessary, e.g. in the case of funcplot.inx's help function listing) The easier solution is to add a check whether the param is a description and not add it to the cmdline. This would also benefit the notebook parameter whose cmdline text is also often superfluous (the cmdline specification of which notebook tab was selected). Implementing this is peanuts. Ideas? Johan

2 1

Numerical input of node coordinates
by Aron Stansvik 25 Jan '07

25 Jan '07

Hello Inkscape developers. I recently started looking at how to add support for numerical input of node coordinates when editing a path, and it seems it will be a bit trickier than I initially though. My first question is how would you want this feature to work? There are two approaches that I can see: * Inputs in node editing tool bar - Values are updated while dragging a node? - Values are updated when a node is released after dragging? * Inputs in a dialog - Dialog is shown when double clicking a node? - Dialog is shown by pressing a button in the tool bar? After mentioning this on IRC, it seems the first approach is the favored one. So a couple of questions regarding this approach: 1) What's the best way to make the node editing tool bar aware of what goes on in nodepath.cpp (node selected, moved, N of selected nodes et.c.). Can I fire off signals and the tool bar will see them? The approach that the select tool bar uses to get notified of object modifications does not really seem to work for this (though I'm not sure). 2) Is it really important that the input values are updated _while_ dragging a node (like with object dragging), and not when dragging stops? (Latter seems easier to implement). Any advice and pointers from people more familiar with this part of the Inkscape code is appreciated, since this is my first stab at hacking Inkscape and I might be poking at the wrong places. Best regards, Aron Stansvik PS. ACSpike on IRC suggested that bbyak is probably the man I'm after. You there bbyak? :) DS.

2 9

Re: [Inkscape-devel] Inkscape 0.45 Release Plan
by Arpad Biro 25 Jan '07

25 Jan '07

Hi, > 2. For committing translations during the Hard Freeze, Aaron and I > would like to have an official Translations Integrator to handle > committing of all the translation patches. Arpad, do you have time > to take this role again this release? If not, then Cornelius, would > you be willing to take the role? OK for me. Still better would be to have both of us (Cornelius and me) in that role... Arpad Biro ____________________________________________________________________________________ Food fight? Enjoy some healthy debate in the Yahoo! Answers Food & Drink Q&A. http://answers.yahoo.com/dir/?link=list&sid=396545367

2 1

+ Inkscape::SVG::PathString
by MenTaLguY 24 Jan '07

24 Jan '07

I've noticed a number of places in the codebase where people have been painstakingly building SVG path strings by hand. There had to be a better way. And now there is: Inkscape::SVG::PathString. It accumulates SVG path operations and is convertable to a Glib::ustring. Inkscape::SVG::PathString str; str.moveTo(0, 0).lineTo(100, 0) .lineTo(100, 100).lineTo(0, 100) .closePath(); return str.c_str(); (You don't have to do all the operations in one go, but you can if you want.) Check out the before and after of using it in sp-ellipse.cpp: http://svn.sourceforge.net/viewvc/inkscape/inkscape/trunk/src/sp-ellipse.cp… So, the next time you're tempted to break out a raw SVGOStringStream (or worse, sprintf) to build a path string, consider SVG::PathString instead. -mental

2 2

Path optimizations?
by MenTaLguY 24 Jan '07

24 Jan '07

Now that we've got all our path building going through one class (SVG::PathString), we've got the opportunity to do some syntactic optimizations if we want -- for instance, using H or V instead of L for axis-aligned segments. Think that's worthwhile? Any other optimizations you all would like to see? -mental

2 1

Fwd: SVG icon proposal
by ryan lerch 23 Jan '07

23 Jan '07

just checked it up, and yes they did decide on a winner: http://svglogo.com/finalists.html cheers, Ryanlerch On 1/23/07, Jon Phillips <jon@...235...> wrote: > On Tue, 2007-01-23 at 08:45 +1000, ryan lerch wrote: > > on a somewhat different note, a couple of months back, rejon and > > myself whipped up a few idea for an SVG logo that could be used on the > > web similar to the RSS feed icon and such.... > > The ideas can be viewed on the openclipart libarary... > > > > http://openclipart.org/cchost/media/files/ryanlerch/1029 > > > > cheers, > > > > ryanlerch > > Didn't stelt and SVG crew come up with a final winner in that SVG logo > debate? Stelt, maybe you can comment... > > Jon > > > On 1/23/07, Alan Horkan <horkana@...44...> wrote: > > > > > > On Mon, 22 Jan 2007 J.B.C.Engelen@...1578... wrote: > > > > > > > Date: Mon, 22 Jan 2007 15:25:22 +0100 > > > > From: J.B.C.Engelen@...1578... > > > > To: fede.caceres@...400..., inkscape-devel(a)lists.sourceforge.net > > > > Subject: Re: [Inkscape-devel] SVG icon proposal > > > > > > > > Federico Caceres wrote: > > > > > You will find a preview of the icon along with an icon ".ico" > > > > > file available for download at the following address: > > > > > http://fredpyo.pandela.net/inkscape/index.htm > > > > > > > > I like it :) However, I would remove 'inkscape' to make it more generic. > > > > Maybe add a little color? > > > > > > I must agree, Text in an icon is not generally a good idea. > > > > > > The icon does have the advantage of looking quite simliar to those used by > > > Adobe Illustrator (although there is some reserve snobbery and some wont > > > like it for the same reason). > > > > > > The 16x16 size is unusable, it would be better to have a different simpler > > > icon for that size. > > > > > > -- > > > Alan > > > > > > ------------------------------------------------------------------------- > > > Take Surveys. Earn Cash. Influence the Future of IT > > > Join SourceForge.net's Techsay panel and you'll get the chance to share your > > > opinions on IT & business topics through brief surveys - and earn cash > > > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > > > _______________________________________________ > > > Inkscape-devel mailing list > > > Inkscape-devel(a)lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/inkscape-devel > > > > > > > ------------------------------------------------------------------------- > > Take Surveys. Earn Cash. Influence the Future of IT > > Join SourceForge.net's Techsay panel and you'll get the chance to share your > > opinions on IT & business topics through brief surveys - and earn cash > > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > > _______________________________________________ > > Inkscape-devel mailing list > > Inkscape-devel(a)lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/inkscape-devel > -- > Jon Phillips > > San Francisco, CA > USA PH 510.499.0894 > jon@...235... > http://www.rejon.org > > MSN, AIM, Yahoo Chat: kidproto > Jabber Chat: rejon@...896... > IRC: rejon@...897... > >

5 5

command line operation to reduce document boundry
by ryan lerch 23 Jan '07

23 Jan '07

i am wondering if there is a command for the inkscape command line that allows an svg's document boundry to be reduced to fit tight around all the elements. If there is not one, it sure would be handy for us over at the openclipart library... cheers, ryanlerch

5 7

Icon proposal update
by Federico Caceres 23 Jan '07

23 Jan '07

I have updated the icon proposal, now I have added color to the icon, please share your comments and thoughts. http://fredpyo.pandela.net/inkscape/ Thanks

4 4

Status of inkboard feature
by Denis Leroy 23 Jan '07

23 Jan '07

What is the status of the inkboard feature ? Is it considered stable ? More importantly, is it considered safe (from a security standpoint) ? We had requests in Fedora to have the feature enabled and so am doing some testing on my side. It was originally turned off because it was pretty unstable and would often crash in the loudmouth library, but that was a while ago... thx! -denis

8 10

Re: [Inkscape-devel] [Inkscape-user] version `GCC_3.4' not found
by Aaron Spike 23 Jan '07

23 Jan '07

Karol Krenski wrote: > Just tried the new inkscape-0.45pre1.x86.package that is advertised on > www.inkscape.org. I am getting these errors when trying to launch: > > [mimooh@...1641... ~]$ inkscape > inkscape: /lib/libgcc_s.so.1: version `GCC_3.4' not found (required by inkscape) Well that is pretty depressing. Don't give up on me. I'll let you know when I've got a new package for you to test. And I will need help testing to make sure this gets fixed. In the meantime, anybody got any clues about libgcc_s.so.1? Aaron Spike

1 0

Post-0.45 development efforts?
by Bryce Harrington 23 Jan '07

23 Jan '07

It's been a while since the roadmap got a good review, and it's grown a bit out of date and massively needs re-prioritization. Fortunately, so much progress has been made since the last time we did a major update, that huge chunks of it can be crossed off. :-) I've cleaned off all the finished tasks, and categorized all the remaining items. Can you review and let me know if there is anything missing? New/Changed Dependencies: * Gtk 2.8 Architectural Refactoring Effort: * Eliminate all use of sp_repr_new in favor of XML::Document::* classes * Migrate SPObject to native C++ classes * Implement [http://grin-optics.org gradient] UI "release" handler to deal with gradient garbage collection (see bug 984854) * 2geom Integration * Eliminate use of the style.h types in as much of codebase as possible, particularly display/*. * Create an SPObject API for tracking references and avoiding id clashes on import and interdocument copy/paste. What we need are a void SPDocument::importCopies([set of SPObjects]), and an [set of SPObjects] SPObject::dependencies() method. * Replace style.cpp entirely, with a clearer and cleaner version. * Cairo Adoption Effort: ** Prereq: Is renderer immune to the same kinds of numerical problems we see with our new renderer, libnr, or libart? ** Will the new renderer improve performance for most users? ** Integrate a Cairo-based SVG Canvas library Codebase Cleanup Effort: * Change to use of GQuarks instead of #defines where feasible * Learn and use autoscan and autoreconf to find out which configure tests are still needed. * Clean up configure.in * (PARTIALLY DONE) [http://inkscape.org/cgi-bin/wiki.pl?DirectoryReorgProposal Directory Reorganization] * Convert all tabs into spaces (convert tabs to 4 spaces) * Rename all '[[SPFooBar]]' routines to '[[FooBar]]' and put into namespaces ** (DONE) dialogs folder File Format Support Effort: * PDF Import/Export ** Identify remaining problems with the Cairo-based PDF tool * Native Adobe Illustrator file Import/Export ** Requires good PDF Import/Export * Visio support ** Add extension for use of [[VDX2SVG]] (http://vdxtosvg.sourceforge.net/) ** Add extension for use of [[PDF2SVG]] (http://www.solidcode.net/pdf2svg/ - this doesn't actually link to a useful page) * DXF import/export * gdkpixbuf(?) - would give JPEG support Extensions Effort: * Implement extension API * Implement extension registry * Complete Extension preferences dialog * Dia-like smart shapes support User Interface Effort: * Object-to-object snapping * Enhanced grid system * improvement of svg patterns UI - make it similar to gradient-drag, instead of piggybacking knotholder * Palettes ** Custom palettes like from Gnome ** Ability to load 3rd-party palettes (e.g. Pantone, Trumatch, Focoltone, Toyo, etc.) * Implement [[LittleCMS]] as color management system * Implement iso & hex grid * Editable toolbars (libegg) * Reenable fuzzy font matching [bb] * Improve freehand curve smoothness [pjrm, paraprax] * Geometrical constraints ** "Perpendicular-to", "Parallel-to", etc. * Path trimming/extending/offset * Filleting tool Desktop Integration Effort: * [[WebDAV/FTP]] support via GNOME-VFS, Neon, or the like * Make printing work more efficiently and reliably * Inter-application cut-and-paste * Inter-application drag-and-drop * Clipart manager GUI Testing Effort: * Include some rendering tests in `make check'. * Get 'make check' to pass on Win32 and OSX * Investigate performance measurement testing for Inkscape Animation Effort * Prereq: We need a conceptualization of how it should work * Currently, part of the concept discussion is at [[Animation-(Timeline)|here]] SVG Feature Compliance Effort: * Implement perspective transformations via [[PerspectiveObject]] * Scripting * Path editing * Shaped strokes * Markers ** Inherit stroke properties like color ** On-canvas editing ** Fix snapping issue * Masking/clippaths ** on-canvas editing ** Should work like gradient tool to apply transparency * hyperlinking * Ensure Inkscape does not throw away the internal DTD subsets of documents it reads

2 1

SVG icon proposal
by Federico Caceres 22 Jan '07

22 Jan '07

Hello, I wanted to share this icon proposal with anyone that's interested, mainly for those that don't have another icon for the ".svg" filetype, and that work almost exclusively with Inkscape on this filetype. You will find a preview of the icon along with an icon ".ico" file available for download at the following address: http://fredpyo.pandela.net/inkscape/index.htm Hope that you find it useful.

6 6

more textual problems
by Arpad Biro 22 Jan '07

22 Jan '07

Hi, A few more textual problems in 0.45 branch. typo ---- "exctly" ("Envelope" extension) appears in English, even if translated -------------------------------------- "Fractalize" ("Fractalize" extension) "Subdivisions" "Smoothness" "Single" ("Pattern along Path" extension) "Single, stretched" "Repeated" "Repeated, stretched" "Snake" "Ribbon" Arpad Biro ____________________________________________________________________________________ 8:00? 8:25? 8:40? Find a flick in no time with the Yahoo! Search movie showtime shortcut. http://tools.search.yahoo.com/shortcuts/#news

1 0

Do you imagine if InkScape Develpers...
by Esteban Barahona 22 Jan '07

22 Jan '07

meet on Real Life (TadeMark_Sign)?!

3 4

Re: [Inkscape-devel] textual problems in release 0.45 branch
by Arpad Biro 22 Jan '07

22 Jan '07

Hi, > > "Text Outline File" -- what's a "text outline"? > > I think this means: "Textual file describing outline" What do you mean by "outline"? (Do you mean "draft"?) Arpad Biro ____________________________________________________________________________________ The fish are biting. Get more visitors on your site using Yahoo! Search Marketing. http://searchmarketing.yahoo.com/arp/sponsoredsearch_v2.php

5 4

sp_repr_new deprecated
by MenTaLguY 21 Jan '07

21 Jan '07

Whoa. What? Yeah. Here's the deal: the new-style (Inkscape::)XML::* APIs were originally created with the intent to allow alternate internal document representations. For instance, one document might have a simple in-memory document based on in-memory XML::SimpleNodes, while another might have nodes backed by a remote database (with its own wrapper XML::Node subclasses). This ability would be beneficial for things like inkboard, as well as properly implementing DOM. The problem is that the continuing use of sp_repr_new prevents us taking advantage of this ability. As long as nodes are created independently of the document they'll ultimately be added to, all documents have to be using the same node classes so that nodes are interchangeable. So, the plan is to begin creating all nodes via XML::Document::createElement, XML::Document::createTextNode, and XML::Document::createComment. In theory you should be able to get the right XML::Document * from the parent node you intend to attach the new node to (via XML::Node::document), but because of the behavior required by sp_repr_new, not all parents are guaranteed to have a valid document, preventing us from doing things the simple way. So, right now, you've got several places you can potentially get the required XML::Document * from, in order of roughly decreasing preference: SPDocument *, using sp_document_repr_doc() SPObject *, via the SPDocument * you get from SP_OBJECT_DOCUMENT SPDesktop * (SPView *), via the SPDocument * from ->doc() SPEventContext *, via the SPDocument * from SP_EVENT_CONTEXT_DOCUMENT Thankfully, it won't be this bad forever. Once sp_repr_new is gone and some other changes are made, we'll be able to get document pointers in more convenient ways. -mental

1 0

Re: [Inkscape-devel] textual problems in release 0.45 branch
by Arpad Biro 21 Jan '07

21 Jan '07

Hi, > Would it hurt anything for me to commit the updated po's right now, or > should we only do it at the point of string freeze? The PO files were updated a few hours ago, but of course they can be updated at any time -- provided we "svn update" before that. Arpad Biro ____________________________________________________________________________________ Now that's room service! Choose from over 150,000 hotels in 45,000 destinations on Yahoo! Travel to find your fit. http://farechase.yahoo.com/promo-generic-14795097

1 0

UI string that needs to be split
by Arpad Biro 21 Jan '07

21 Jan '07

Hi, > > same string, different meaning (should be split) > > ------------------------------------------------ > > > > "Clone" (as selection describer: noun -- in undo history: verb) > > I don't know how to split it, please submit a patch Taking a look at previously split strings, this is the difference between a normal and a split string (both from clonetiler.cpp): radio = gtk_radio_button_new_with_label (gtk_radio_button_group (GTK_RADIO_BUTTON (radio)), _("B")); //TRANSLATORS: only translate "string" in "context|string". // For more details, see http://developer.gnome.org/doc/API/2.0/glib/glib-I18N.html#Q-:CAPS radio = gtk_radio_button_new_with_label (gtk_radio_button_group (GTK_RADIO_BUTTON (radio)), Q_("clonetiler|H")); So my guess is we need Q_("noun|Clone") instead of _("Clone") where used as selection describer, and the same for "verb|Clone" where used as a verb. Arpad Biro ____________________________________________________________________________________ Cheap talk? Check out Yahoo! Messenger's low PC-to-Phone call rates. http://voice.yahoo.com

1 0

Inkscape 0.45-pre1 Released
by Bryce Harrington 21 Jan '07

21 Jan '07

Hi all, Our first official preview release of Inkscape 0.45 is now available for download: https://sourceforge.net/project/showfiles.php?group_id=93438&package_id=991… Note that I've just posted the source package; hopefully soon packagers will begin uploading packages for specific platforms. This release is intended for beta testers. There will be no further functional change between this and the 0.45 final release. Expected changes after this include translations, bug fixes, and packaging cleanup. Please give it a try, and if you spot issues please make sure they are listed in our bug tracker. Thanks! Bryce

3 2

delete page clutter
by Esteban Barahona 20 Jan '07

20 Jan '07

I want a simple feature negative request... it's to delete the fake.page it's just useless clutter... it takes valuable white space when it's needed the most.

2 1

PDF for 0.45 [done]
by MenTaLguY 20 Jan '07

20 Jan '07

I've finished re-enabling the legacy PDF support, and disabling the cairo output extensions. -mental

2 1

0.45-release-branch problems:
by Tavmjong Bah 20 Jan '07

20 Jan '07

Hi, Here are some problems I see with an hour old 0.45-release-branch install (Fedora Core 6): 1. Installation fails with error: make[2]: *** No rule to make target `about.bg.svg', needed by `all-am'. Stop. See same problem with trunk. 2. Page format: Banner 468x60 is actually 60.0 x 468.0 px 3. Could not set custom page size (perhaps because of installation problem). 3. Envelope (aka Summer's Night) effect seems broken (also broken in SVN and 0.44). The generated path is not inside the target quadrilateral. I seem to remember that the y-axis was flipped internally at some point... could this have broken it? The effect also generates error messages of the following type: ** (inkscape:20971): WARNING **: Unimplemented style property SP_PROP_ENABLE_BACKGROUND: value: accumulate ** (inkscape:20971): WARNING **: Unimplemented style property SP_PROP_ENABLE_BACKGROUND: value: accumulate ** (inkscape:20971): WARNING **: Format autodetect failed. The file is being opened as SVG. 4. Perspective effect: The orientation of the output image is rotated 90 degrees from what I would have expected. Take two quadrilaterals with the first nodes in the paths at the upper left. When one quadrilateral is embed in the other, the embed quadrilateral's first node is at the upper right. The new path is also not closed. Perspective effect generates same error messages as Envelope effect. Tav

6 10

[Fwd: BoF Accepted] SCALE
by jtaber 19 Jan '07

19 Jan '07

The Inkscape BOF is on Sat 10th 19:00. Come one, come all. -------- Original Message -------- Subject: BoF Accepted Date: Thu, 18 Jan 2007 22:37:15 -0800 From: Gareth J. Greenaway <g@...1153...> Organization: Southern California Linux Expo To: jtaber <jtaber@...480...> John, I just wanted to let you know that SCALE accepted your BoF submission. The schedule for BoFs is now online at: http://www.socallinuxexpo.org/scale5x/events/bof.php Thanks and we'll see you at SCALE! Gareth -- Gareth J. Greenaway | g@...1153... Voice - 877-831-2569 x130 Southern California Linux Expo http://www.socallinuxexpo.org

1 0

Patch for 0.45: Tangoified icon
by Josef 'cornelius' Vybíral 18 Jan '07

18 Jan '07

Hi fellow developers, there is one "patch" in the tracker[1] I would like to know if it can be included in upcoming 0.45 version. It is tangoified icon by Andreas Nilsson for Inkscape, based on a cleaned version of the official logo. The reworked icon looks really nice imho and it would be good to have it in. It can make Inkscape fit the currently redrawn gnome-icon-theme (and not only this one, but it fits well among other icons on other desktops like MS Windows or MacOS X). Besides the good look, I see another advantage also that it can be more easily recognisable on light as well as on dark backgrounds then the actual one. So, what do you think? Sincerely Josef Vybíral a.k.a. cornelius [1] http://sourceforge.net/tracker/index.php?func=detail&aid=1590179&group_id=9… -- Josef Vybíral a.k.a. cornelius ------------------------------ web: http://cornelius.gimp.cz mail: cornelius@...1135... jabber: cornelius@...1136...

5 10

textual problems in trunk
by Arpad Biro 18 Jan '07

18 Jan '07

Hi, A few textual problems with "0.44+devel, built Jan 13 2007". possible typo ------------- "Star: Change spike ratio" (I guess it should be "spoke", like in "Spoke ratio:") untranslatable strings ---------------------- "Stroke:" (in fill/stroke widget on toolbar and in prefs) "Fill:" (in fill/stroke widget on toolbar and in prefs) "clipped" (in status bar message) appears in English, even if translated -------------------------------------- "Use the pressure of the input device to alter the width of the pen" "Use the tilt of the input device to alter the angle of the pen's nib" same string, different meaning (should be split) ------------------------------------------------ "Clone" (as selection describer: noun -- in undo history: verb) tooltips don't show up ---------------------- Calligraphy toolbar tooltips are not displayed. questions --------- "Source left bound" -- does this mean "left edge of source"? "Nudge" -- what does it mean? "Make connectors with end-markers (arrows) point downwards" -- what does this function do? Arpad Biro ____________________________________________________________________________________ Need Mail bonding? Go to the Yahoo! Mail Q&A for great tips from Yahoo! Answers users. http://answers.yahoo.com/dir/?link=list&sid=396546091

2 1

Re: [Inkscape-devel] [Patch] Make TOOLS_NODE mode selected when creating an offset
by MenTaLguY 18 Jan '07

18 Jan '07

On Thu, 2007-01-18 at 14:11 +0100, David Douard wrote: > The actual behaviour being IMHO very disappointing. > When in selection mode, by example, creating a linked offset just seem > to do nothing. I mean nothing happen on the screen. One have to change > to Node Selection mode to notice that the selected item only have one > node handle (the one for setting the offset radius). Yeah, I've noticed this too. I've applied your patch to trunk; let's see how it works out. -mental

1 0

help me, please
by flame flame 18 Jan '07

18 Jan '07

Hi, When I compile inkscape source code got by CVS on Ubuntu Linux, I get a compilation error: ./configure make ... ui/dialog/align-and-distribute.cpp: In member function \u2018std::_List_iterator<SPItem*> Inkscape::UI::Dialog::AlignAndDistribute::find_master(std::list<SPItem*, std::allocator<SPItem*> >&, bool)\u2019: ui/dialog/align-and-distribute.cpp:1029: error: conversion from \u2018int\u2019 to non-scalar type \u2018std::_List_iterator<SPItem*>\u2019 requested ./util/glib-list-iterators.h: In member function \u2018T* const& Inkscape::Util::GSListConstIterator<T*>::operator*() const [with T = SPItem]\u2019: /usr/lib/gcc/i486-linux-gnu/4.1.2/../../../../include/c++/4.1.2/bits/stl_list.h:1117: instantiated from \u2018void std::list<_Tp, _Alloc>::_M_insert_dispatch(std::_List_iterator<_Tp>, _InputIterator, _InputIterator, __false_type) [with _InputIterator = Inkscape::Util::GSListConstIterator<SPItem*>, _Tp = SPItem*, _Alloc = std::allocator<SPItem*>]\u2019 /usr/lib/gcc/i486-linux-gnu/4.1.2/../../../../include/c++/4.1.2/bits/stl_list.h:830: instantiated from \u2018void std::list<_Tp, _Alloc>::insert(std::_List_iterator<_Tp>, _InputIterator, _InputIterator) [with _InputIterator = Inkscape::Util::GSListConstIterator<SPItem*>, _Tp = SPItem*, _Alloc = std::allocator<SPItem*>]\u2019 ui/dialog/align-and-distribute.cpp:125: instantiated from here ./util/glib-list-iterators.h:47: warning: dereferencing type-punned pointer will break strict-aliasing rules make[2]: *** [ui/dialog/align-and-distribute.o] Error 1 make[2]: Leaving directory `/home/flame/WorkDir/temp/inkscape/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/flame/WorkDir/temp/inkscape' make: *** [all] Error 2 It seems wrong type conversion, but I have no idea about it. I hope your help. Thanks! Flame _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

2 1

Thrice-daily Inkscapes
by Daniel Díaz 17 Jan '07

17 Jan '07

Hello! I'm happy to announce that the Bleeding-Edge Inkscape Factory is up and running again! Inkscape is being cross-compiled to Windows three-times a day, and the resulting packages are being uploaded to Modevia's Inkscape site (thanks again, Mike!). You can find them here: http://inkscape.modevia.com/win32-snap/ There are ZIP, 7z, and .exe installers for each successful build. I would like to hear some feedback on whether the ZIP files are useful, since they take 47 MB of disk space each (47*3 = 141 MB daily!). And also I wanted to know if the "à la carte" directory was useful and if it would be worth reinstalling it. Greetings, then! Daniel Díaz yosoy@...31...

3 2

Re: [Inkscape-devel] [Inkscape-user] About Screen for 0.45 - Results
by momo 17 Jan '07

17 Jan '07

Hello, I have a problem with the about screen. The blurs seem to be clipped and there is nothibng I can do about it. Looks like the blur problem is still persisting on my system (altough it's a clean install of 0.45 pre0). I attach the about screen file, along with another SVG (10.svg) showing the same problems and screenshots of the way these files are rendered on my system. Can anyone not having this blur rendering bug undertake the about screen finition please? - redraw the glare under the sharpest ball so it look normally, not as if it was clipped. If you don't have the same rendering as me, then just try to resave the SVG and send it to me, I'll see if the file saved by another system shows differently on mine... - slightly unblur the sharpest ball so it looks more realistic (now it's set to 3.5%, and needs to be reduced to 1-1,5%. I cannot do it because of bug [ 1617082 ] Blur UI: value quantization, slider behavior] ) Apologizes for the bunch of attachments. Many thanks. Molumen *************************************** files attached: - 10.svg is a test svg created in 0.45 devel+ from 07-01-2007 - screenshot_of_rendering.jpg is a screenshot of 10.svg rendered in 0.45 pre0 - exported from Inkscape045pre0.png is a png exported from the file 10.svg by 0.45 pre0 - inkscapeabout0222.svg is the about screen that has to be finished - about_screen_rendered.jpg is a screenshot showing the way the flare is rendered (as if it was clipped) - About_screen_exported_from_0.45pre0.png is a PNG exported directly from 0.45pre0. Note that the third ball is exported without the flare under it. *************************************** ----- Original Message ----- From: "Jasper van de Gronde" <th.v.d.gronde@...528...> To: "Inkscape User Community" <inkscape-user(a)lists.sourceforge.net> Sent: Friday, January 12, 2007 4:19 PM Subject: Re: [Inkscape-user] [Inkscape-devel] About Screen for 0.45 - Results > Joshua A. Andler wrote: >> Nice move on my part... >> >> ARGH! I included the wrong link. The winning entry is at: >> http://www.deviantart.com/deviation/45363866/ > > The white glare on the flat surface under the second ball from the left > seems to be clipped, is that intentional? If not, can anything be done > about it? > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share > your > opinions on IT & business topics through brief surveys - and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > _______________________________________________ > Inkscape-user mailing list > Inkscape-user(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/inkscape-user >

4 9

po file error on trunk
by Aaron Spike 17 Jan '07

17 Jan '07

I was trying to test bbyak's fixes but I get the following error on win32: msgfmt po/it.po -o build/locale/it/LC_MESSAGES/inkscape.mo ============================= Make error: <msgfmt> problem: po/it.po:11672: duplicate message definition po/it.po:2915: ...this is the location of the first definition po/it.po:11682: duplicate message definition po/it.po:3821: ...this is the location of the first definition po/it.po:11693: duplicate message definition po/it.po:3843: ...this is the location of the first definition msgfmt: found 3 fatal errors Aaron Spike

2 1

does inkboard work?
by Aaron Spike 16 Jan '07

16 Jan '07

Thinking back, I can't remember successfully sharing a document since the rewrite of inkboard. I have on occation been able to connect to google talk and chat with the embedded pedro client. Today I installed a local wildfire server to remove as many variables as possible. Now I can't even connect. Inkboard gives "login: no second SASL challenge offered by server." So my question is this. Who has gotten inkboard to work recently? And how did you do it? Aaron Spike

5 5

Remaining critical bugs for 0.45
by Bryce Harrington 16 Jan '07

16 Jan '07

With the bug hunt out of the way, the last bit of bug fixing work is to attend any MustFix bugs. These are extremely serious bugs such as ones that cause frequent crashes, or that risk bad data loss. I've gone through the current (as of 1/8/07) bug list and separated out the ones that a) we don't have enough info to debug, b) are out of our hands anyway, or c) don't cause crashes or data loss. Please review this list and identify any you can show to be must fix bugs. For a bug to be nominated to be a MUST FIX bug, it must also include a willing owner who can work on it right now, and some form of a plan for what to do about it. (Otherwise, blocking on it may prove unproductive.) CRASHES OR DATA LOSS ------------------------------------------------------------------------ 1515192 make check failure 1630485 Inkview don't support blur / crashes 1630101 crash inkscape click in connectors network aling 1575829 Metadata are truncated at 4 chars and add a char 18 hexa 1464771 whiteboard: cannot connect to jabber server then crashses REQUIRES UPSTREAM ACTION ------------------------------------------------------------------------ 969321 "Dialogs on top" does not work on Windows REQUIRES MORE INFORMATION OR CONFIRMATION ------------------------------------------------------------------------ 1627110 Assertion hit in inkscape_get_repr when getting prefs 1612057 memory limit at 1GB 1538282 crash when switching to selection tool 1519462 OpenBSD: Inkscape hangs/segfaults 1418122 Conf corruption when opening files with non-UTF encoded 1507967 [INFO NEEDED] Cannot open svgz 1516476 build problems on Solaris 1395505 0.43 crash at startup on Win98se 1614820 Crash when moving nodes in XML Editor after duplicate. 1603579 Crash open file dialog start directory with 1513877 autopackage libcairo.so.2 dependency problem 1508157 GDKpixbufInput files to Init on SuSE 10.1 with 0.44pre4 1503564 win2003 SP1: crash on start 1467137 Shrinking a pattern causes lock-up 1624076 Crash after changing canvas size fields by click 1499971 detect and warn about installed libsmooth 1496718 Text paragraph display problem on OS X MISBEHAVIOR BUT NO CRASH OR DATA LOSS ------------------------------------------------------------------------ 1469554 fixed length toolbars prevent working on narrow screens 1494967 Text toolbar: too difficult to close fonts drop-down 1495039 whiteboard backtrace reveals sensitive information 1448618 Fonts weight variants selection 1441003 flowRoot error with inkscape's svg 937347 symbol fonts not supported? 1586421 Mandarin TEXT RENDERING problem 1584935 blur not exported to pdf 1519730 Linked offset performance issues 1513484 icc compile error 1441767 OpenType fonts with postscript outlines not supported. 1370904 isnan issue, sun Solaris 8 gcc 1143821 COPY/PASTE doesn't work with system clipboard 1505549 drag and delete line crash Inkscape 0.45devel (crash fixed) Bryce

7 12

0.45 Critical Bugs
by Bryce Harrington 16 Jan '07

16 Jan '07

Hi all, I've gone through all of the critical bugs (level 9) that are still open and knocked out all the ones that are still needing info or that don't lead to crashes/deadlocks/dataloss/etc. These are the bugs that remain: 1633884 make check failure in svg-color.cpp 1633685 Crash on undo connector 1630756 memory limit 1 GB 1630101 crash inkscape click in connectors network align 1624076 Crash after changing canvas size fields by click 1612057 memory limit at 1GB 1587063 Infinite loop / Deadlock on Windows 1576715 Crash when ungrouping connectors 1565938 crash in sp_font_selector_size_changed 1557355 Crash when clicking on the "Object style" button 1551606 Crash when selecting font 1547502 ** Inkscape crash when Text dialog called 1543598 Crashes when in Latin1 path name 1537529 CRASH with shape tool and popup menu mouse clicks 1503564 win2003 SP1: crash on start 1499971 detect and warn about installed libsmooth 1467137 Shrinking a pattern causes lock-up 1441003 flowRoot error with inkscape's svg It'd be a miracle if all of these were closed prior to the 0.45 release. There is only one bug that I am truly concerned with for the release (marked ** above), but even that one is not being hit by everyone (although I suspect one of the other font bugs is a dupe of it). What do others think? Are there any bugs above that you feel would ruin Inkscape 0.45 if we didn't fix in the release? Or any bugs that aren't listed, that you think should be? Bryce

4 3

Inkscape svn head unfrozen - return to regular development
by Bryce Harrington 16 Jan '07

16 Jan '07

With the 0.45 release branch now established, all developers may now return to regular unfrozen development on svn head. :-) Changes for the 0.45 (like translations, bug fixes, tutorial updates, etc.) will need to be committed to both HEAD and the release branch. Bryce

1 0

Inkscape 0.45 release branch established
by Bryce Harrington 16 Jan '07

16 Jan '07

Hi all, ACSpike and I have created the release branch for Inkscape 0.45. With this, we are now ready to move to into Feature Freeze. All further release work (translations, tutorial updates, bug fixes, etc.) will need to be done on the release branch. You can check it out like this: svn checkout \\ https://inkscape.svn.sourceforge.net/svnroot/inkscape/inkscape/branches/REL… \\ inkscape-0.45-release-branch Note that whereas in previous releases, the branch was made AFTER the feature freeze; this time we're doing it BEFORE the feature freeze. The reason for this is to enable svn HEAD to return to regular development. So please, if you have changes that must go into the release, be sure to commit to both the release branch -and- to svn HEAD. Bryce

1 0

Re: [Inkscape-devel] SCALE Inkscape BOF
by jtaber 16 Jan '07

16 Jan '07

Josh, I think showing off the improved gradients would be cool. Wear a black turtleneck :) Can you also demo how blur works ? Showing off the new about screen should really wow people (it certainly wowed me). You will have one of the free passes. ps: let's shoot for a group dinner - last year it was a lot of fun. john Joshua A. Andler wrote: > I'm waiting for my FSA refund to get my tickets and hotel. I believe > my wife will actually be flying out there with me too, but probably > not hanging at the event. > > Is there anything you guys would like for me to coordinate? Currently > I'm trying to obtain permission from some deviantart users to see if > we can print their stuff off to have at the booth in a binder or > something. > > Has anyone talked to Jon Cruz? Any word if he will attend? Ted, wrt > demoing... if you can talk tech (how it works), I can do demos. :) > > Would you guys be opposed to us showing stuff off that will be in > 0.46? I know we'll barely have 0.45 out the door by then, but the > improved gradient editing that Johan is working on is phenomenal! > > Let me know... > > -Josh > > > > Ted Gould wrote: >> On Sat, 2007-01-13 at 13:05 -0700, jtaber wrote: >>> Our BOF is on. I figure we can give 3-4 short demos (like 5 slides >>> or so) of different aspects. I have offered to do one on layers / >>> GIS usage. Here are some other suggestions for others: >> >> I don't know of anything that I could demo, but I'll be there to answer >> questions. >> >> Other SCALE stuff... >> >> - I talked Gareth about the possibility of they providing a couple of >> demo computers for the booth. He thinks they may be able to do that. >> >> - I've been trying to get a hold of Wacom again for tablets. But, I've >> been unsuccessful. CES and the holidays are some of the reasons, but >> I'm not optimistic right now. I'll continue the harassment for a little >> while longer though :) >> >> What else is up? I'm excited about SCALE! >> >> --Ted >> >> >> >> ------------------------------------------------------------------------- >> >> Take Surveys. Earn Cash. Influence the Future of IT >> Join SourceForge.net's Techsay panel and you'll get the chance to >> share your >> opinions on IT & business topics through brief surveys - and earn cash >> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV >> >> _______________________________________________ >> Inkscape-devel mailing list >> Inkscape-devel(a)lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/inkscape-devel >> >> > > >

1 0

"plain svg" is 1.2 not 1.0
by Alex Mac 15 Jan '07

15 Jan '07

saving as plain svg creates an svg document that claims to be svg 1.0 and yet contains things like flowRoot and flowRegion from 1.2 Is there any way to flatten an inkscape document to plain valid svg 1.1? Its a bit inconvenient to have to use "convert to text" on each text flow in the document

3 3

SCALE INkscape BOF
by jtaber 15 Jan '07

15 Jan '07

Our BOF is on. I figure we can give 3-4 short demos (like 5 slides or so) of different aspects. I have offered to do one on layers / GIS usage. Here are some other suggestions for others: * Release .45 features * Showing gradient/blur features - the new about dialog is awesome - we need someone artistic that can show how this is done (Josh ?). Maybe this can show the use of a tablet as well. * any other favorite features I think it's important to keep the demos short so there is lots of time for questions John

2 2

Effect->Color->Brighter
by Tavmjong Bah 15 Jan '07

15 Jan '07

Hi, I am having trouble understanding the logic of the Color Brighter effect. The Color Darker effect is quite simple... it takes each RGB component and multiplies it by 0.9 resulting in moving the color 10% of the distance towards black. I would have thought that the Brighten effect would move a color 10% of the distance towards white. Instead it has logic that changes Black (0,0,0) to (10,10,10), any R, G, or B value less than 10 to 11, and any R, G, or B value greater than 10 gets divided by 0.9. This results in a greater change, the brighter the source color. A simple replacement for the current Brighter effect would be: r=int( (25.5 + 0.9 * r); g=int( (25.5 + 0.9 * g); b=int( (25.5 + 0.9 * b); One can see easily see that these equations have the right limits for what I would have expected. Tav

3 2

arrowhead color bug
by jtaber 13 Jan '07

13 Jan '07

Arrowheads that remain black regardless of line color remains a problem. There are various bug postings for this - some showing closed others showing open. All have been given a priority of 5. Yet this is a real usability issue. I've tried to look at the code without success but it seems that the arrowhead takes the alignment from the line so it should also be able to take the color. Can someone have a go at this before .45 ?

2 1

"flood-color" attributes fail in make check
by Bryce Harrington 13 Jan '07

13 Jan '07

We're making good progress through the make check errors. This one I'm not sure about so if anyone has some ideas please shoot. make[2]: Entering directory `/home/bryce/src/Inkscape/inkscape/src' Running 75 tests........................................................... In AttributesTest::testAttributes: ./attributes-test.h:489: Warning: "flood-color" ./attributes-test.h:489: Warning: "flood-opacity" ./attributes-test.h:493: Error: Assertion failed: !found ............... Failed 1 of 75 tests Success rate: 98% FAIL: test-all Does anyone know what is going wrong here? Bryce

3 2

HOW TO AVOID :
by P.L. MALUTAN - WEBAdmin 12 Jan '07

12 Jan '07

Dear members I have a generated Svg which when I edit it I loss it's functionality because inkscape remove from my file when the svg is it opened <?xml version="1.0" standalone="no"?> <!DOCTYPE svg> <?xml-stylesheet href="mystyle.css" type="text/css"?> <?AdobeSVGViewer save="snapshot"?> <svg version="1.1" width="21cm" height="29.7cm" viewBox="0 0 744 1052" id="SVGTest" onload="fixreferences();" preserveAspectRatio="xMidYMid meet" zoomAndPan="magnify" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg"> <script type="text/javascript"> ... and all onmouseout="parent.on_mouse_out('1');" or onmouseout or onmouseclick events ... in the group elements... <g id="grp_ref_1" onmouseover="parent.on_mouse_over('1');" onmouseout="parent.on_mouse_out('1');" onclick="parent.on_mouse_click('1');"><rect x="40" y="40" width="40" height="40" fill="#FFCC00" fill-opacity="0.4" text-anchor="middle"/><text x="60" y="68" fill="#000000" fill-opacity="1" text-anchor="middle" font-size="20px" font-family="Arial" startOffset="0">1</text></g> .... HOW TO AVOID THESE MODIFICATION PLEASE ? With kind regards Petronel

3 2

About Screen for 0.45 - Developer Voting Time
by Bryce Harrington 12 Jan '07

12 Jan '07

The community has selected the following about screens as the three best: - http://www.deviantart.com/deviation/45363866/ - http://www.deviantart.com/deviation/45360907/ - http://www.deviantart.com/deviation/44792424/ All eligible developers are encouraged to cast a vote for one of these three entries. To vote, simply reply to this message on-list, and indicate which of the above three choices you think is best for our release. Josh "ScislaC" Andler will be collecting the votes starting now. All votes must be cast by noon Friday the 12th, UTC. Eligible voters include anyone with their name in the Inkscape AUTHORS or TRANSLATORS file, or who is a registered member of the Inkscape SourceForge project. Bryce

14 16

Fw: [Inkscape-user] About Screen for 0.45 - Results
by momo 12 Jan '07

12 Jan '07

> The white glare on the flat surface under the second ball from the left > seems to be clipped, is that intentional? If not, can anything be done > about it? It's not clipped, it was just rendered this way in and old 0.45devel version (the one it was actually made in). I'll check that, thanks for reporting. Molumen

1 0

rewrite of the filename_add_extension() in src/dialogs/export.cpp
by Muthiah Annamalai 12 Jan '07

12 Jan '07

Hello there, I have made a rewrite of the filename_add_extension() in src/dialogs/export.cpp based on the FIXME comment there. I have test script and the patch attached. Thanks, Muthu

2 2

svg-color.cpp - make check error
by Bryce Harrington 12 Jan '07

12 Jan '07

Hi all, There appears to be just a single make check error (at least, on my box): g++ -Wall -W -Wpointer-arith -Wcast-align -Wsign-compare -Woverloaded-virtual -Wswitch -Wno-unused-pa svg/libspsvg.a(css-ostringstream.o): In function `CSSOStringStream': /usr/lib/gcc/i686-pc-linux-gnu/3.4.6/include/g++-v3/bits/ios_base.h:629: undefined reference to `prefs_' /usr/lib/gcc/i686-pc-linux-gnu/3.4.6/include/g++-v3/bits/ios_base.h:629: undefined reference to `prefs_' svg/libspsvg.a(stringstream.o): In function `SVGOStringStream': /usr/lib/gcc/i686-pc-linux-gnu/3.4.6/include/g++-v3/bits/ios_base.h:629: undefined reference to `prefs_' /usr/lib/gcc/i686-pc-linux-gnu/3.4.6/include/g++-v3/bits/ios_base.h:629: undefined reference to `prefs_' svg/libspsvg.a(svg-color.o): In function `sp_svg_write_color(char*, unsigned int, unsigned int)': svg/svg-color.cpp:429: undefined reference to `prefs_get_int_attribute(char const*, char const*, long l' collect2: ld returned 1 exit status make[2]: *** [svg/test-svg] Error 1 I've doublechecked the header file that defines prefs_get_int_attribute, and it has to gchar* args and a long long. I experimented with casting the args for this call of that routine, but always got the same error. Anyone else got a better idea? Bryce

1 0

Alt-Click shortcut
by Bryce Harrington 12 Jan '07

12 Jan '07

Currently Inkscape uses Alt-Click for various things (select-under, randomize star, etc.) However, generally this shortcut is taken by the desktop environments. In fact we have a bug in our tracker and in Ubuntu's tracker: http://sourceforge.net/tracker/index.php?func=detail&aid=1250110&group_id=9… It is possible for the user to recover this shortcut for Inkscape by disabling it in the desktop environment's configuration settings, but this has the obvious downside of disallowing the shortcut for other programs beyond Inkscape. In playing around with it a little, I notice that Alt-Ctrl-LeftClick appears to produce the same behavior as Alt-LeftClick. Since Alt-Ctrl-LeftClick is not taken by the desktop environment, there is no conflict. Thus it would seem that we could address the bug easily without any code change to Inkscape, by simply altering the documentation to indicate use of Alt-Ctrl-LeftClick instead of Alt-LeftClick. For users who prefer the Alt-LeftClick behavior, that will remain working so no functionality is lost. What do others think of this approach? Bryce

7 14

A brazilian wiki with scripts tutorials and gallery
by Popolon 12 Jan '07

12 Jan '07

Didn't know this before. Yemanja say there was a good brasilian wiki about inkscape. She has the project to do another in french, with same spirit : http://twiki.softwarelivre.org/bin/view/InkscapeBrasil/WebHome There are cool SVG (galeria section), some nice tutorials (screenshot should be enough for people knowing inkscape but that doesn't understand portuguese). And some inkscape scripts from a guy linked in the gallery. Inkmoz a script using mozilla gecko to apply javascript on svg documents (english + portuguese): http://colibre.com.br/bin/view/Aurium/InkMoz Only described in portuguese, a script for designer that cuts a svg for webpage : http://colibre.com.br/bin/view/Aurium/InkscapeAreaCuter (sorry only understand words that are near from french ones). I will post another message when the fr wiki will be OK.

1 0

Fwd: About Screen for 0.45 - Developer Voting Time
by john cliff 11 Jan '07

11 Jan '07

On 1/11/07, Aaron Spike <aaron@...749...> wrote: > Bryce Harrington wrote: > > - http://www.deviantart.com/deviation/45360907/ > > Even though I don't think this example exercises blur as much as we > would like, I can't help but love the mountain. It get's my vote. > > Aaron Spike > Ditto, may not be as obviously blurred, but i love the image, gets my vote Sim.

1 0

Buildtool fix
by Bob Jamison 11 Jan '07

11 Jan '07

Hi, Everyone who is building on win32 will want to 'svn up' and recompile buildtool.cpp: g++ buildtool.cpp -o btool Johan pointed out a bug to me where the .mo files in /locale were being copied to the wrong place. That is now fixed. This is -very- important to have before 0.45. Thanks, Johan! bob

1 0

Re: [Inkscape-devel] Building Inkscape on Win32
by unknown＠example.com 11 Jan '07

11 Jan '07

Johan wrote: > Currently we use 'buildtool' to build Inkscape on windows, > which works perfect. Should we therefore still keep > Makefile.mingw and its friends up to date? > I cannot 'make' Inkscape with gtk210 because > "-I$(GTK)/include/cairomm-1.0 \" > is missing in the include paths. When added it works fine, > for the first files, but compilation stops at > /dom/io/socket.cpp (plus i get a GLIBMM_DLL redefinition > warning for a lot of files) > > Also, I tried the latest build from > http://inkscape.modevia.com/ and it crashes when the global > pref window is opened. > > Lots of build problems right before the release :S > > Note that when I do 'buildtool dist' I get no errors and a > nice working Inkscape distribution (that does not crash on > opening pref dialog), but with the locale language files not > properly copied. > > 1. Should 'make' be made to work properly on Windows. If yes, > with gtk2.10 of gtk2.8? > 2. inkscape.modevia.com crosscompiles I think; does that > cause the crashes on pref. dialog? Note that it is not that hard to get correct builds from 'make': only Makefile.mingw.common has to be updated a bit which was real easy. My question is therefore: should this be done in future and be committed to SVN? Maybe only for this release for the last time? And then after the release, delete all mingw makefiles, so there is no confusion anymore?

4 5

Schedule for 0.45 release branch
by Bryce Harrington 11 Jan '07

11 Jan '07

For this release, we're doing things a little differently in that we'll be tagging the release branch earlier in the process than usual. This is primarily to enable developers not focusing on the release process to continue with development work. During hard freezes we require use of the patch tracker instead of svn anyway, so it shouldn't hurt to return svn to regular developer access anyway. So, we're planning on tagging the release branch this weekend - perhaps as early as Friday. The main requirement is that we want to be able to pass 'make check'. Ideally, I'd like to see us pass on all platforms (Linux, Win32, and OSX), but at least we must pass on Linux. Bryce

1 0

NEW: perspective extension
by bulia byak 11 Jan '07

11 Jan '07

I have committed the Perspective extension from our patch tracker. Like Envelope, it morphs one path to fit another path with 4 nodes, but it does it differently using with perspective distortions. One thing it requires is the Numeric Python package. Since we're carrying our own Python on Windows, can we add it to the package too? Otherwise this extension is unusable on Windows. There are more issues with this extension, such as it not working properly for me :) http://sourceforge.net/tracker/index.php?func=detail&aid=1600298&group_id=9… Also it displays a window with some Python/Inkscape warnings after it is run. However I decided to commit it, since being an extension it will not destabilize the program, and because more people will find it and test it and hopefully fix it. -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org

1 0

how to detect a selected node in an extension
by unknown＠example.com 11 Jan '07

11 Jan '07

Hello, I try to do some manipulations on paths within a python extension. As I saw a selected object is passed as argument with its id to the python script. Now I am interested in finding out which node of a path is selected in single-node-manipulation mode (don't know the exact name in English). Is there a way to get an list of selected indices or something like that? Thanks Werner Arnhold

2 1

Building Inkscape on Win32
by unknown＠example.com 11 Jan '07

11 Jan '07

Currently we use 'buildtool' to build Inkscape on windows, which works perfect. Should we therefore still keep Makefile.mingw and its friends up to date? I cannot 'make' Inkscape with gtk210 because "-I$(GTK)/include/cairomm-1.0 \" is missing in the include paths. When added it works fine, for the first files, but compilation stops at /dom/io/socket.cpp (plus i get a GLIBMM_DLL redefinition warning for a lot of files) Also, I tried the latest build from http://inkscape.modevia.com/ and it crashes when the global pref window is opened. Lots of build problems right before the release :S Note that when I do 'buildtool dist' I get no errors and a nice working Inkscape distribution (that does not crash on opening pref dialog), but with the locale language files not properly copied. 1. Should 'make' be made to work properly on Windows. If yes, with gtk2.10 of gtk2.8? 2. inkscape.modevia.com crosscompiles I think; does that cause the crashes on pref. dialog?

2 1

Inkscape 0.45-pre0 released
by Bryce Harrington 11 Jan '07

11 Jan '07

This is the first pre-release of Inkscape 0.45. The purpose of this release is to give packagers a package to test their procedures on, so we can identify where problems are in time for the pre1 release. Much work still remains before Inkscape 0.45 can be finalized. Download here: http://sourceforge.net/project/showfiles.php?group_id=93438&package_id=9911… Please experiment with creating packages (rpms, debs, zips, etc.) of this package and report any problems to the bug tracker. Here's the issues I already know about: * NEWS - release notes are not yet complete; we'll replace this with the finalized version later * About screen is missing. Pending contest. * keys.de.html is empty. This file was missing, and I created a 0-byte file just so make distcheck will pass. There is a bug in the bug tracker about this. * For win32 there is a new 'buildtool' for building Inkscape, however the dist packaging notes in Wiki still reflect the old build approach. If other steps should be performed, someone please update the wiki to document the correct steps for the new system. Bryce

3 3

compilation errors
by flame biz 11 Jan '07

11 Jan '07

hello everyone i use MinGW 4 and GTK 2.10 to compile inkscape project snapshot inkscape-20070107-1900, there are some errors: c:/gtk210/include/pangomm-1.4/pangomm/context.h:42:29: error: cairomm/context.h: No such file or directory c:/gtk210/include/pangomm-1.4/pangomm/context.h:43:33: error: cairomm/fontoptions.h: No such file or directory i hava to copy folder c:\gtk210\include\cairomm-1.0\caromm to c:\gtk210\include, the errors listed above did not appear but some new error appeared: dom/io/socket.cpp:61: error: expected constructor, destructor, or type conversion before 'namespace' how can i solve it ? flame _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

1 0

Postscript input extension and skencil
by Denis Leroy 11 Jan '07

11 Jan '07

Hi, The current PostScript input extensions are dependent on the skconvert utility (it uses pstoedit -f sk to produce sketch format), itself part of Skencil, a "competing" (? :-) ) vector drawing project. As the Fedora inkscape maintainer, this dependency is somewhat problematic. From a distribution/packaging perspective, it is difficult to justify a hard dependency between inkscape and skencil as skencil is itself another desktop application and also fairly large. It is also somewhat non-intuitive and confusing to the end-user (and as a side-note, skencil might be dropped eventually because it's still based on gtk1). Now, I would still like to have PostScript import work out of the box as that's a feature that was requested by several users. So my questions: why the skconvert dependency ? Are there any alternatives ? pstoedit has many output formats (such as plot-svg using GNU libplot), is it possible to use a different one to achieve the same result ? -denis

7 17

interruptible display
by Alexandre Prokoudine 10 Jan '07

10 Jan '07

Hi, While testing current Inkscape from trunk I immediately ran into a feature that can easily be perceived as a bug: dragging a gradient slider on 200/400% I see rectangles inside an object come and go all the time. On #inkscape I was told that this is the result of interruptible display introduced to improve responsiveness. My guess is that users might not understand that this is a feature. I see two ways to minimize public confusion: 1. Provide a better explanation in Release Notes. 2. If possible, make this behavior toggleable, ideally -- introduce a Xara-like "Rendering tradeoff" slider ;-) What do you think? Alexandre

4 10

filter bug #1632748
by MenTaLguY 10 Jan '07

10 Jan '07

FYI, there's a filter bug we need to fix: http://sourceforge.net/support/tracker.php?aid=1632748 All SPFilter children are getting cast to SPGaussianBlur regardless of their actual type. Incorrect rendering + potential crash. -mental

1 0

Inkscape 0.45 About Screen Contest - Community voting results
by Joshua A. Andler 10 Jan '07

10 Jan '07

Hey there developers... I'm really sorry for how overly-complex I'm probably making this. Hopefully my reasoning will make sense. Following are the top voted items in order of most to least votes. As I figured would happen for the voting (which is why I asked for a "runner-up" vote), we had a tie for a number one pick. The interesting thing is the difference between including the secondary votes... #3 becomes #1, and one of the two that tied for first (#1 in the single) becomes #4. For note, I will be asking the artists for the runner-up entries if we can get them to create screenshots for us with their work. So either way the work won't be "lost" and will be on shown. People did some really great stuff that would be a nice addition to the screenshot page. :) The results based on only going by people's 1st vote (you'll see the tie): 1 - http://www.deviantart.com/deviation/44792424/ - 10 votes 1 - http://www.deviantart.com/deviation/45360907/ - 10 votes 3 - http://www.deviantart.com/deviation/45363866/ - 9 votes But when you take the secondary votes into consideration, the results are a bit different: 1 - http://www.deviantart.com/deviation/45363866/ - 20 votes 2 - http://www.deviantart.com/deviation/45360907/ - 16 votes 3 - http://www.deviantart.com/deviation/45537505/ - 15 votes 4 - http://www.deviantart.com/deviation/44792424/ - 13 votes 5 - http://www.deviantart.com/deviation/45681921/ - 12 votes I included 1-5 there because what was #1 (tied) in the single was #4 when including the secondary... and hrum's pen was worthy to be included too. ;) So... before voting begins... single or double vote roster? The real difference is it's a top 3 or top 5 we're choosing from (I say 5 choices is better). -Josh

4 5

Release Wardens for Inkscape 0.45
by Bryce Harrington 10 Jan '07

10 Jan '07

Every release we identify two 'Release Wardens' for the release. We invest these two individuals with nigh-absolute dictatorial authority over the codebase until the release is cut. This way, we as a project can benefit from the control of a central authority temporarily in the critical phases of a release, while being able to remain freeform and decentralized for the vast bulk of our development phases. The pair is always composed of one person from the prior release, and one new person. Aaron Spike was one of the wardens for 0.44, and so would be welcome as the senior warden for 0.45. I would like to volunteer as the junior warden for this release; although I've always been involved in releases, I have not served as a warden before. Bryce

4 4

2 million downloads
by bulia byak 10 Jan '07

10 Jan '07

In other news, some days ago Inkscape has passed the 2 million total downloads mark: http://sourceforge.net/project/stats/detail.php?group_id=93438&ugn=inkscape… (Could someone publish a front page news item on this?) -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org

2 1

bounding boxes
by MenTaLguY 10 Jan '07

10 Jan '07

I've been giving bounding boxes more thought, and it seems like there are actually three different kinds of bounding boxes required in Inkscape: - GEOMETRIC: the bounding box of the path data, without stroking -- this is what the SVG standard means by "bounding box"; it is not reduced by clipping - INTERACTION: the bounding box with stroke, plus (maybe) visual things like the filter effects region; it _may_ be reduced by clipping - VISUAL: the bounding box with stroke, _including miter joins_, and things like the filter effects region, it has to be be reduced by clipping The idea is that GEOMETRIC will be used to satisfy the SVG specification, while INTERACTION defines the region that a user can "grab on to", and VISUAL defines the region within which e.g. all affected pixels fall. -mental

3 3

tutorials cleanup: help needed
by bulia byak 10 Jan '07

10 Jan '07

We have tutorial-calligraphy.pt_BR.svg in share/tutorials, but no corresponding xml file in the doc-docbook module in SVN. Please _everyone_ who has ever translated the tutorials, upload the docbook xml sources to that module, or send them to someone with SVN commit rights asking him to upload it for you. Without that, we can't for example fix the tutorial-calligraphy.pt_BR.svg file which is badly broken. Also, we have much more tutorial translations in SVG than we have HTML tutorials here: http://inkscape.org/doc/index.php. Please remember that if you submit a new translation, you need to generate not only SVG but also HTML (use the make-html script) to be put up on the web site and linked from that page. (Again, if you don't have commit rights for the web site, ask someone to do it for you.) Volunteers are welcome and encouraged to help us sync this all up for the release. Thanks! -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org

1 0

Announce: Scribus 1.3.3.7 Release
by Plinnell 09 Jan '07

09 Jan '07

The Scribus Team is pleased to announce the release of Scribus 1.3.3.7 This release is purely a further bug fix release to the recently released 1.3.3.6. This release adds more translation updates, some bugs were found and fixed, many improvements to the SVG importer. A new splash screen and other artwork were contributed by Kevin Young. One of two major additions to this release is the porting of Scribus to OS/2 by Paul Smedley. This port is lightly tested and there are some known issues noted in the readme for OS/2, along with notes on installation. No major code changes were required and in testing it has been fairly stable. The other is the availability of a new OpenSuse rpm download repository for all Suse versions 9.3+, including SLED 10. To download add: http://software.opensuse.org/download/home:/mrdocs/ to your yast/apt/smart source list for the corresponding Suse version. We hope have this for Mandriva and Fedora 5+ shortly. As we announced previously, there will be no more development or bug fixes to 1.2.x series. We now recommend all distributions package only Scribus 1.3.3.x The Scribus Team would also like to thank - Anduin.net/Øverby Consulting and Cardia AS for their continued hosting of all of the Scribus websites. The Scribus Team would also like to thank the many end users, translators, testers and contributors who helped us with this release. About Scribus Scribus is a cross-platform open source page layout application with a focus on high quality commercial grade PDF and postscript export. Originally developed on Linux, Scribus now runs natively on MacOSX, OS/2, many forms of Unix and Windows 2000/XP. Underneath the modern and user friendly interface, Scribus supports professional publishing features, such as CMYK color, spot colors, separations, ICC color management and versatile PDF creation. Scribus was the first page layout application on the planet to directly support PDF/X-3 output, a rigorous ISO standard. Scribus did so by almost a year. The Scribus Team is made up of a diverse group of developers with significant experience in pre-press and newspaper publishing. Commercial support for Scribus is available for companies and institutions for implementation, training and migration.

1 0

WIN XP: Preferences dialog crashes
by bulia byak 09 Jan '07

09 Jan '07

On XP, the two latest builds: http://inkscape.modevia.com/win32/Inkscape0701071623.7z http://inkscape.modevia.com/win32/Inkscape0701061515.7z crash when trying to open Preferences dialog. Previous builds are OK. Unfortunately the backtrace I could get on Windows is less than helpful, but on one try I got a message "failed to allocate 1024 bytes"; on other tries it just died silently. Anyone else seeing this? -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org

3 2

Python extensions breakage when built against Python 2.5 & later
by Muthiah Annamalai 09 Jan '07

09 Jan '07

This is w.r.t the bug report http://sourceforge.net/tracker/index.php?func=detail&aid=1629444&group_id=9… which complains python extensions break on the new python2.5+ SVN (python's) on the inkscape. It leads from a autogen SWIG script. I dont know if this is the right thing, but I am submitting a diff against the files in /src/extensions/script/inkscape_py_wrap.cpp which fixed the problem for me, on the svn trunk. Cheers Muthu

2 1

PNG export of SVG with Blur
by Nicu Buculei 09 Jan '07

09 Jan '07

I have a not very complex SVG (7 layers, under 20 blurred objects) and it proved impossible to export it as PNG at 1600x1200. CPU usage climbs to 100% (Athlon XP 1800+) and stay here, Inkscape becomes unresponsive. I had to kill it after 30 minutes. Exporting a thumbnail at 128x96 work OK, but the full image not. I tried a workaround: separate the file in 7 different files (one for each layer), export them as PNG and put together in GIMP. It is doable for 6 of the 7 layers (but not nice with some of them). The last layer remaining (attached) is the worst: I can't export it as PNG. It contains only two shapes, each of them with a blur filter. Export to PNG at 1600x1200 freeze Inkscape and I killed it after 30 minutes. Is there a way for me to get the PNG? I guess I can leave it over night to export, but this is ridiculous for such a small and simple file. Used the autopackage version 20070101 (after I got the same bad performance with a slightly older autopackage version). -- nicu

5 10

Tamil translation
by Muthiah Annamalai 08 Jan '07

08 Jan '07

Hello there! I am currently trying to translate parts of Inkscape in Tamil (the ta.po), and I am going to post this later this week. Cheers, Muthu

1 0

Bug Hunt Finished!
by Bryce Harrington 08 Jan '07

08 Jan '07

Today Inkscape achieved the 300 point Bug Hunt goal, thanks to work from Bulia Byak, Johan Engelen, Gustav B, and others. The number of critical bugs has dropped to 20. Due to these efforts, we are now ready to move to the next phase of the release cycle. ID Pts Description Assignee ------------------------------------------------------------------------ 1517414 9 Node join crash: delete segment left subpath bbyak 1630193 9 crash when joining an orphan node bbyak 1591411 9 Paths w/ spaces need to have double quotes johanengelen 1502439 9 Crash :Gtk-CRITICAL **: gtk_style_detach gustav_b 1629994 9 SEGV on CTRL + with nothing selected johanengelen 1620741 3 commit 12417 contains C99 strtof bbyak 1623869 6 clip mask with gradient fill makes objects disappear bbyak 1629384 3 The Post Dates are Wrong cwebb 1537876 6 tutorials in Russian not available nodoby 1628254 9 Localized tutorials do not load nobody 1628295 6 Bottom of the web site page cwebb 1505549 9 drag and delete line crash Inkscape 0.45devel bbyak 1628173 6 Gradient tool not working for flowed text bbyak 1580903 9 crash adjusting slider when spinbutton has focus bbyak 1538282 9 crash when switching to selection tool bbyak 1332888 12 Clones: moving two adjoining objects in chain moves bbyak 1593499 6 Tablet cursor drift when dragging bezier gustav_b 1624880 9 download page ishmal 1588594 9 Link broken - Daniel's Thrice Daily builds bryce 1628085 3 PNG file not created/not recognized by WINXP johanengelen 1598192 6 Download Page Instructions Need Updating bryce 1617112 9 Blur is applied after transform, not before bbyak 1488128 9 Aligning (Snapping) to Grid or Guides does not work nobody 1349761 9 Inkboard: inkscape crashes when trying to connect dwyip 1507710 9 crash after leaving an isolated node handle nobody 1605927 9 Path combine (and other ops) lose transform johanengelen 1610103 6 font-size px missing after font family change johanengelen 1590980 9 CRASH: Markers to Stroke Paint bbyak 1625278 9 Crash when trying to load a SVG file bryce 1501553 3 Can't rotate with transform dialog box bryce 1520625 6 Linked clone as clip path does not update nobody 1516933 9 text stroke crash inkscape nobody 1575685 6 web redirects inkscape.org/faq/ kidproto 1565162 3 Gradient stop color not updated in list nobody 1595030 6 Stroke width after Union changed in a strange way nobody 1620066 6 Lost dialog for exporting and color nobody 1598337 9 Crash when trying to delete invisible layer cyreve 1561416 6 EPS export broken theadib 1597605 6 Fontnames containing spaces are incorrectly written theadib 1572450 3 Dialogs pop up off screen nobody 1604391 3 MouseWheel NodeSelection > Undo = Floating Node nobody 1513218 6 Win32: ask if old menus.xml should be kept when... theadib 1612814 3 Guides ans Gridlines vanish on corresp. alpha... nobody 1576258 3 Color artifact in SVN gaussian blur nobody ------------------------------------------------------------------------ Total 303 Done! Bryce

2 2

Please update Release Notes for Inkscape 0.45
by Bryce Harrington 08 Jan '07

08 Jan '07

One of our most important documents for the release is our Release Notes. Please take a moment to review and ensure that they reflect any noteworthy work you've done for this release: http://wiki.inkscape.org/wiki/index.php/ReleaseNotes045 In particular, we need info added to that page for the following: * [color markers to match stroke - acspike] * [axonometric grid] * [new Help commands] * [sculpt profiles - bbyak] * [new toolbar: squeezable, expansion menu, right-click menus - joncruz] * [union of a single object - acspike] Please edit the wiki page to add info to explain the above changes. Also be sure we have adequately accounted for all "Known Issues" (see the end of the release notes for the list.) Thanks, Bryce

1 0

Translator credits in about dialog
by Luca Bruno 07 Jan '07

07 Jan '07

Hi all, actually the translators list in our about dialog is hardcoded in src/ui/dialog/aboutbox.cpp. It looks quite outdated and without any changes for a while, plus I think it is quite difficult to maintain it as-is and update with latest right data and copyroght at each release. So I propose to adopt the mechanism of "translator-credits" as in use and widespread across the gnome framework, because each contributor knows all local contributors better than us. (see http://www.gnome.org/~malcolm/i18n/tips.html ) I've made a patch for it, but as I'm not a programmer I'm asking for comments/corrections. It's attached here. Any opinions on it? May I commit it now (we aren't yet in string freeze) or should I better wait post-0.45? Cheers, Luca -- .''`. ** Debian GNU/Linux ** | Luca Bruno : :' : The Universal O.S. | luca.br(AT)uno.it `. `'` | GPG Key ID: 3BFB9FB3 `- http://www.debian.org | Proud Debian GNU/Linux User

5 5

RFC: SVG filter transformations
by MenTaLguY 07 Jan '07

07 Jan '07

Well, it looks like Inkscape's behavior is non-compliant at the moment, but only under certain combinations of transformations (generally, rotation + non-uniform scaling). bulia and I have been discussing this, and since reworking filters will take a while, we think we have two options for this release: 1. leave the behavior as it is 2. disable filter rendering when the output would be non-compliant #1 has the advantage that the bug would be less noticeable (fewer user complaints until the next release when it's fixed), and it has the disadvantage that the bug would be less noticeable (people getting bitten when the rendering behavior changes in the next release). #2 has the advantage that it actively discourages people from using filters in situations where Inkscape can't currently render them properly. It has the disadvantage that it might actively discourage them from using filters. Which one should we go with? Other suggestions? -mental

5 15

Bug Hunt for Inkscape 0.45
by Bryce Harrington 07 Jan '07

07 Jan '07

Wow, we're within sight of the end - over 80% of the way there. Bulia closed the first "over a year old" bug. I wonder who'll close the bug that puts us over the 300pt mark? 1537876 6 tutorials in Russian not available nodoby 1628254 9 Localized tutorials do not load nobody 1628295 6 Bottom of the web site page cwebb 1505549 9 drag and delete line crash Inkscape 0.45devel bbyak 1628173 6 Gradient tool not working for flowed text bbyak 1580903 9 crash adjusting slider when spinbutton has focus bbyak 1538282 9 crash when switching to selection tool bbyak 1332888 12 Clones: moving two adjoining objects in chain moves bbyak 1593499 6 Tablet cursor drift when dragging bezier gustav_b 1624880 9 download page ishmal 1588594 9 Link broken - Daniel's Thrice Daily builds bryce 1628085 3 PNG file not created/not recognized by WINXP johanengelen 1598192 6 Download Page Instructions Need Updating bryce 1617112 9 Blur is applied after transform, not before bbyak 1488128 9 Aligning (Snapping) to Grid or Guides does not work nobody 1349761 9 Inkboard: inkscape crashes when trying to connect dwyip 1507710 9 crash after leaving an isolated node handle nobody 1605927 9 Path combine (and other ops) lose transform johanengelen 1610103 6 font-size px missing after font family change johanengelen 1590980 9 CRASH: Markers to Stroke Paint bbyak 1625278 9 Crash when trying to load a SVG file bryce 1501553 3 Can't rotate with transform dialog box bryce 1520625 6 Linked clone as clip path does not update nobody 1516933 9 text stroke crash inkscape nobody 1575685 6 web redirects inkscape.org/faq/ kidproto 1565162 3 Gradient stop color not updated in list nobody 1595030 6 Stroke width after Union changed in a strange way nobody 1620066 6 Lost dialog for exporting and color nobody 1598337 9 Crash when trying to delete invisible layer cyreve 1561416 6 EPS export broken theadib 1597605 6 Fontnames containing spaces are incorrectly written theadib 1572450 3 Dialogs pop up off screen nobody 1604391 3 MouseWheel NodeSelection > Undo = Floating Node nobody 1513218 6 Win32: ask if old menus.xml should be kept when... theadib 1612814 3 Guides ans Gridlines vanish on corresp. alpha... nobody 1576258 3 Color artifact in SVN gaussian blur nobody ------------------------------------------------------------------------ Total 246 Bryce

1 0

Extension Question: Multi-line text box for user input?
by Dustin Vaselaar 07 Jan '07

07 Jan '07

Hello, I'm looking at making a custom extension for Inkscape and would like to know if there is a way to have the user input window for the extension contain a multi-line text box for user input? Basically, I would like a text box that can pass a more complex variable, complete with line-ends. I've looked through the extension documentation, however I can't see a way of creating more that a simple one line user input text box. FYI: I wasn't quite sure if this was the correct mailing list for posting this type of question, if I should be asking a different list please let me know. -Dustin

2 1

Dialog decoration inconsistency
by unknown＠example.com 05 Jan '07

05 Jan '07

There is an inconsistency between decorations of dialogs due to old-C-style dialogs and new C++-style ones. Decorations are the minimize, maximize and close buttons. The old dialogs (eg. Fill&Stroke) have all 3, the new dialogs (eg. Transform) only have the close button. What is the desired decoration style? I vote for only the close button, and perhaps a button to 'collapse' it (minimizing on the spot). - Johan

5 5

docs category in bugs tracker
by Alexandre Prokoudine 04 Jan '07

04 Jan '07

Hi, Bugs tracker now has a new category: "Documentation". Please use it, if you see mistakes in text, tutorials not loading etc. Alexandre

1 0

Bug Stats for 0.45 release
by Bryce Harrington 04 Jan '07

04 Jan '07

Bug fixing activity is really picking up lately. Thanks everyone that's helping on this! We've knocked the total number of critical bugs down to 27. 1593499 6 Tablet cursor drift when dragging bezier gustav_b 1624880 9 download page ishmal 1588594 9 Link broken - Daniel's Thrice Daily builds bryce 1628085 3 PNG file not created/not recognized by WINXP johanengelen 1598192 6 Download Page Instructions Need Updating bryce 1617112 9 Blur is applied after transform, not before bbyak 1488128 9 Aligning (Snapping) to Grid or Guides does not work nobody 1349761 9 Inkboard: inkscape crashes when trying to connect dwyip 1507710 9 crash after leaving an isolated node handle nobody 1605927 9 Path combine (and other ops) lose transform johanengelen 1610103 6 font-size px missing after font family change johanengelen 1590980 9 CRASH: Markers to Stroke Paint bbyak 1625278 9 Crash when trying to load a SVG file bryce 1501553 3 Can't rotate with transform dialog box bryce 1520625 6 Linked clone as clip path does not update nobody 1516933 9 text stroke crash inkscape nobody 1575685 6 web redirects inkscape.org/faq/ kidproto 1565162 3 Gradient stop color not updated in list nobody 1595030 6 Stroke width after Union changed in a strange way nobody 1620066 6 Lost dialog for exporting and color nobody 1598337 9 Crash when trying to delete invisible layer cyreve 1561416 6 EPS export broken theadib 1597605 6 Fontnames containing spaces are incorrectly written theadib 1572450 3 Dialogs pop up off screen nobody 1604391 3 MouseWheel NodeSelection > Undo = Floating Node nobody 1513218 6 Win32: ask if old menus.xml should be kept when... theadib 1612814 3 Guides ans Gridlines vanish on corresp. alpha... nobody 1576258 3 Color artifact in SVN gaussian blur nobody ------------------------------------------------------------------------ Total 180 It's nice to see that most of the critical bugs left are older ones (over 6 months). Also, a few of those may already be fixed, but just need confirmation. Please take a few minutes to go through the level-9 bugs for your platform and see if you can get the same results or not. Bryce

1 0

WIN32 locale setting infiltrates Inkscape UI
by momo 04 Jan '07

04 Jan '07

Hi, Not sure if this is closely related to bug [ 1250581 ] "WIN32: Inkscape uses locale settings for determining UI lang" so I post it to the list. On an ENGLISH WinXP system with Russian locale set I get russian buttons in Inkscape dialogs (all the rest of Inkscape's UI is in English as it should). I post a screenshot of the bug attached to this mail. Is this an Inkscape bug, or a GTK one? Thanks! Molumen

1 0

Bug confirmation needed
by Bryce Harrington 04 Jan '07

04 Jan '07

Hi all, I've added two new categories 'NEEDS CONFIRMATION' and 'NEEDS CONFIRMATION ON SVN HEAD' to our bug tracker, and have begun marking a few bugs that need this. If you have a recent inkscape installation and are on either Win32 or OSX, you can help greatly by seeing if you can recreate these bugs. Please go to this page: http://sourceforge.net/tracker/?group_id=93438&atid=604306 Search on Category = NEEDS CONFIRMATION ON SVN HEAD, and set the Group to the platform you're on. Also look in Groups 'Any' or 'All Platforms'. Try to recreate the problem, and then please write in the comment section if you could or could not reproduce the problem. Some of these are very, very old bugs, so just having people confirm that the bugs are no longer present would be extremely helpful in enabling us to focus on bugs that really need our attention. Thanks! Bryce

2 1

Tutorials
by Daniel Pope 04 Jan '07

04 Jan '07

I notice in general that the tutorials in the SVN package do not correspond at all well to the current Inkscape feature set. We don't really have a tutorial for the more complicated features (cloning, clipping, masking, blurring) and tutorial-tips.svg explicitly mentions that we don't support blur yet. Attached is an SVG highlighting some of the effects that can be achieved using Inkscape 0.45. Perhaps something along these lines would be a useful thing to bundle? Dan

6 9

Bug Hunt for 0.45
by Bryce Harrington 03 Jan '07

03 Jan '07

1488128 9 Aligning (Snapping) to Grid or Guides does not work nobody 1349761 9 Inkboard: inkscape crashes when trying to connect dwyip 1507710 9 crash after leaving an isolated node handle nobody 1605927 9 Path combine (and other ops) lose transform johanengelen 1610103 6 font-size px missing after font family change johanengelen 1590980 9 CRASH: Markers to Stroke Paint bbyak 1625278 9 Crash when trying to load a SVG file bryce 1501553 3 Can't rotate with transform dialog box bryce 1520625 6 Linked clone as clip path does not update nobody 1516933 9 text stroke crash inkscape nobody 1575685 6 web redirects inkscape.org/faq/ kidproto 1565162 3 Gradient stop color not updated in list nobody 1595030 6 Stroke width after Union changed in a strange way nobody 1620066 6 Lost dialog for exporting and color nobody 1598337 9 Crash when trying to delete invisible layer cyreve 1561416 6 EPS export broken theadib 1597605 6 Fontnames containing spaces are incorrectly written theadib 1572450 3 Dialogs pop up off screen nobody 1604391 3 MouseWheel NodeSelection > Undo = Floating Node nobody 1513218 6 Win32: ask if old menus.xml should be kept when... theadib 1612814 3 Guides ans Gridlines vanish on corresp. alpha... nobody 1576258 3 Color artifact in SVN gaussian blur nobody ------------------------------------------------------------------------ Total 138 (Goal: 300) We're almost halfway there! I notice that due in part to our bug activity, Inkscape has gone up to rank #20 on SourceForge's most active list. Still, there are 30 level-9 critical bugs still open. I don't see any that are absolute release killers, but the fewer of those left in inkscape when we release, the better. Bryce

1 0

Re: [Inkscape-devel] Inkscape - hyperlinking xlink
by Jon Phillips 03 Jan '07

03 Jan '07

On Tue, 2006-12-19 at 17:31 +1100, Phil Rhoades wrote: > Jon, > > > On Mon, 2006-12-18 at 17:14 -0800, Jon Phillips wrote: > > On Tue, 2006-12-19 at 03:14 +1100, Phil Rhoades wrote: > > > Jon, > > > > > > > > > > Date: 2006-12-15 12:02 > > > > Sender: kidproto > > > > Logged In: YES > > > > user_id=914868 > > > > Originator: YES > > > > > > > Phil, please contact me and/or on the inkscape-devel mailing list > > > > about this. I'm jon@...235... (jon phillips). > > > > > > > Great! > > > > > > > > > Have you got any idea what this might take in time/cost? > > > > > > Regards, > > > > > > Phil. > > > > > > Could you give me a bit of background? I can help put you in touch with > > inkscape developers who could put the work with the $$$... > > > Your comment: "it would be killer to be able to click on an area and it > zooms/pans you to another part of the document...or to another > document." pretty much sums up what I want. The actual application I > have in mind is something resembling a "mind map" or "concept map" for > organising my various projects, which are all related to Life Extension > of some sort (ie Biomedical/Scientific Research and Commercial). I have > looked around at available software but I particularly want to use > Inkscape and Ruby on Rails so it looks like I need to do it myself . . I > could generate the svg from the DB but it would not be as nice, flexible > and easy as drawing the relationships in Inkscape and linking objects to > the data pages. Yes, I agree. This hyperlinking is what you want. It is useful for a lot of things...would you like to work on this? > > > linking is already in the codebase, but there are some specifics which > > need to be enabled for what you want... > > > I tried manually putting in the xlinks in the svg but it causes > namespace problems - in any case, I would immediately lose anything that > was added manually if I wanted to use Inkscape to re-edit the svg. It > seems like such a useful addition to Inkscape that I thought it might be > worth paying for . . depending on the cost. I'm cc'ing the inkscape-devel list to see if others have played with this. Yes, someone in Inkscape would be interested in coding and/or working for pay ;) > The first (easier) step would be just to link to an external page which > would do what I want immediately but your extended idea of zooming and > panning within the svg would be an attractive second stage. > > Is this what you need? Yes, sounds great! Jon > Regards, > > Phil. -- Jon Phillips San Francisco, CA USA PH 510.499.0894 jon@...235... http://www.rejon.org MSN, AIM, Yahoo Chat: kidproto Jabber Chat: rejon@...896... IRC: rejon@...897...

2 1

Inkscape 0.45 About Screen Contest
by Joshua A. Andler 02 Jan '07

02 Jan '07

The contest begins today and the deadline is December 31st. As with the past few contests we've had, it is being done on DeviantART. You can find out more about it at: http://inkscapers.deviantart.com/journal/11071733/ Good Luck! -Josh

6 10

Inkscape and transient windows (on top dialogs)
by unknown＠example.com 02 Jan '07

02 Jan '07

Short introduction for the maillinglist: There is a discussion ongoing about transient dialogs (dialogs on top) in win32 builds of Inkscape. They do not work for current builds, but can be made to work with (afaik) only one drawback: when Inkscape's mainwindow is minimized while having a dialog on top, the mainwindow cannot simply be restored by clicking the taskbar button as this will give focus to the dialog that was opened. The dialog is not minimized when Inkscape is minimized which causes the problem. The mainwindow is restored by rightclicking the taskbar button and clicking on "Restore". The ongoing discussion is about how to solve this in a way that respects current standards. This mail is about a temporary solution that would greatly greatly greatly (I cannot stress enough) enhance Inkscape's useability. Bulia Byak wrote: > Johan wrote: > > The rightclick-'restore' procedure is not really annoying > > if known, but is very confusing for users and therefore I > > think a complete fix is needed before I can commit the > > #ifndef WIN32 removal. > > Yes, definitely. At the moment, the "dialogs on top" option does not work on win32 anyway, so we might as well remove it from win32 builds. However, I have a better idea: (Note this is for win32 builds only!!!) We could concatenate the options "Dialogs are hidden in taskbar" and "Dialogs on top" into one option "Dialogs on top (experimental)" (checkbox). If unchecked, Inkscape will use the old options "dialogs NOT hidden in taskbar" and "Dialogs on top: none", if checked Inkscape will use "dialogs hidden in taskbar" and "dialogs on top:normal". The "(experimental)" is added so that users know that it is likely to work dissatisfactory, and an explanatory text should be added on how to restore the main window when Inkscape was minimized (i.e. the 'rightclick-restore' procedure). Regards, Johan

1 0

First win32 build of the year
by Bob Jamison 02 Jan '07

02 Jan '07

Nothing important. It just looks good to have "070101". http://inkscape.modevia.com/win32/Inkscape0701011510.7z bob

4 3

Bug Hunt for 0.45
by Bryce Harrington 02 Jan '07

02 Jan '07

About a third of the way there now: 1590980 9 CRASH: Markers to Stroke Paint bbyak 1625278 9 Crash when trying to load a SVG file bryce 1501553 3 Can't rotate with transform dialog box bryce 1520625 6 Linked clone as clip path does not update nobody 1516933 9 text stroke crash inkscape nobody 1575685 6 web redirects inkscape.org/faq/ kidproto 1565162 3 Gradient stop color not updated in list nobody 1595030 6 Stroke width after Union changed in a strange way nobody 1620066 6 Lost dialog for exporting and color nobody 1598337 9 Crash when trying to delete invisible layer cyreve 1561416 6 EPS export broken theadib 1597605 6 Fontnames containing spaces are incorrectly written theadib 1572450 3 Dialogs pop up off screen nobody 1604391 3 MouseWheel NodeSelection > Undo = Floating Node nobody 1513218 6 Win32: ask if old menus.xml should be kept when... theadib 1612814 3 Guides ans Gridlines vanish on corresp. alpha... nobody 1576258 3 Color artifact in SVN gaussian blur nobody ------------------------------------------------------------------------ Total 96 Bryce

1 0

Bug Hunt for 0.45
by Bryce Harrington 01 Jan '07

01 Jan '07

More bugs fixed! About a quarter of the way there. Please remember to set the assignee to yourself (or whomever fixed it) when you close bugs, so we know who to give credit to. 1625278 9 Crash when trying to load a SVG file bryce 1501553 3 Can't rotate with transform dialog box bryce 1520625 6 Linked clone as clip path does not update nobody 1516933 9 text stroke crash inkscape nobody 1575685 6 web redirects inkscape.org/faq/ kidproto 1565162 3 Gradient stop color not updated in list nobody 1595030 6 Stroke width after Union changed in a strange way nobody 1620066 6 Lost dialog for exporting and color nobody 1598337 9 Crash when trying to delete invisible layer cyreve 1561416 6 EPS export broken theadib 1597605 6 Fontnames containing spaces are incorrectly written theadib 1572450 3 Dialogs pop up off screen nobody 1604391 3 MouseWheel NodeSelection > Undo = Floating Node nobody 1513218 6 Win32: ask if old menus.xml should be kept when... theadib 1612814 3 Guides ans Gridlines vanish on corresp. alpha... nobody 1576258 3 Color artifact in SVN gaussian blur nobody ------------------------------------------------------------------------ Total 87 It would be great if we could get 0.45 released before the end of January, so if you have some time, please help investigate open bugs! Bryce

2 1

Re: [Inkscape-devel] Pattern along path crashes
by Michèle Garoche 31 Dec '06

31 Dec '06

Le 30 déc. 2006 à 09:54, Bryce Harrington a écrit : > On Sat, Dec 30, 2006 at 09:37:29AM +0100, Mich?le Garoche wrote: >> Sorry if this is not the right mailing list to ask, just thought that >> there is more chance to touch Mac OS X users here. >> >> I've tried the new pattern along path extension from svn on Mac OS >> X 10.4. >> >> It crashes reproducibly. >> >> Did anyone else try it on Mac successfully? Or is the crash >> confirmed? >> >> Note: I've just copied the extension directory onto the old one from >> 0.44 installation via fink, it worked for all other extensions, >> but it >> could make a difference for this one. > > Please doublecheck that there is a bug in our bug tracker about this. > Attach any example files where the issue occurs, along with steps to > reproduce it. I did not find any bug in the tracker, so I've created one: <http://sourceforge.net/tracker/index.php? func=detail&aid=1625230&group_id=93438&atid=604306> The examples are taken from the extension author's web site (url in the tracker). But it is the same for any group of images. Cheers, Michèle <http://micmacfr.homeunix.org>

1 0

Pattern along path crashes
by Michèle Garoche 30 Dec '06

30 Dec '06

Sorry if this is not the right mailing list to ask, just thought that there is more chance to touch Mac OS X users here. I've tried the new pattern along path extension from svn on Mac OS X 10.4. It crashes reproducibly. Did anyone else try it on Mac successfully? Or is the crash confirmed? Note: I've just copied the extension directory onto the old one from 0.44 installation via fink, it worked for all other extensions, but it could make a difference for this one.

2 1

saving in windows friendly format
by tj 30 Dec '06

30 Dec '06

How can I save an inkscape svg file into a format that Windows can use? I tried saving it as an .eps, but Windows Paint Shop Pro barfed on it. Is there a linux native way to create a jpeg, bitmap, etc? tj

2 1

our filters may be incompatible with SVG
by bulia byak 29 Dec '06

29 Dec '06

I would like to discuss a potentially very serious compatibility issue with our filters implementation. The question is, If an object has a transform, do the filters apply to it _before_ or _after_ transfomation? To illustrate this, do the following: - draw a circle - blur it - squeeze it vertically (note the blur is also squeezed, i.e. x-blur is greater than y-blur) - rotate the object At this stage in Inkscape, the blur remains horizontal, so it is no longer parallel to the object itself, so the appearance of the object changes very visibly after the rotation. If however you now save your file and view it in Batik, you will see that it rotates the blur too, so the object looks exactly the same as before rotation. Note that Inkscape differs from Batik only after you add rotation. For non-uniform scaling, Inkscape emulates Batik's behavior by scaling the x and y deviations of the blur filter when applied to a scaled object. However, such emulation is not possible for rotation or shear, hence the discrepancy. Now, I could not find a definitive indication in SVG 1.1 standard as to which of the two behaviors is correct. (I may have missed it, of course.) Some arguments can be found in favor of both behaviors: Batik: - It is more visually consistent because rotation/shear does not alter the appearance of a filtered object in a confusing way - So far, we always considered Batik an authoritative renderer (though it may be in error too, of course) Inkscape: - The idea of transforming an already filtered object (i.e., in essence, a bitmap!) goes absolutely against our architecture, in which rasterization and filtering are always the last step after all things that can be done in vector (such as transforms) are done. If we try to fix this to match Batik, we will need to implement a separate bitmap transformer (!) which will have to be run for filtered objects _only_ (otherwise we'll end up with pixelated renditions of any scaled-up object). This will be a total mess from the programmer's viewpoint if you ask me. - Our behavior preserves the same appearance of a path regardless of whether its transform is embedded or given in a transform= attribute (but this is currently only true for rotations, not for non-uniform scales). This is a principle which we're kinda trying to uphold, although it's not always possible. I _think_ that even if our behavior is an error, it's not a reason enough to stop 0.45, because this only affects squeezed _and_ rotated objects. However it's still very serious because it's a visible rendering discrepancy. So I would like to discuss this issue and the approach we should eventually pursue. -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org

4 4

please test the proposed perspective extension
by bulia byak 27 Dec '06

27 Dec '06

We have a new Perspective extension in our patch tracker: http://sourceforge.net/tracker/index.php?func=detail&aid=1600298&group_id=9… It's very useful potentially, but for some reason, I can't make it work properly, although it reportedly works for the author and another user. I would appreciate if more people could try it out and report their results. Note that to use it, you will need to install Numeric Python: http://numpy.scipy.org (in addition to regular Python). To install the extension, place the inx and py file from perspective_v0.3.tgz into your extensions directory. Please share your experience - thanks! -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org

1 0

Bug Hunt for 0.45
by Bryce Harrington 27 Dec '06

27 Dec '06

Unfortunately the numbers haven't changed since the last time I posted them, but here's where we are: 1576258 3 Color artifact in SVN gaussian blur nobody 1612814 3 Guides ans Gridlines vanish on corresp. alpha... nobody 1513218 6 Win32: ask if old menus.xml should be kept when... theadib 1604391 3 MouseWheel NodeSelection > Undo = Floating Node nobody 1572450 3 Dialogs pop up off screen nobody ------------------------------------------------------------------------ Total 18 I'm a little concerned because we have a *lot* of high criticality bugs that lead to crashes. How can we get more of these closed? Bryce

4 6

Problems with configure file
by Pierre-Luc Auclair 27 Dec '06

27 Dec '06

Hi, I'm having problems with the configure file. I tried using --with-xft and --without-xft but it doesn't change a thing. Here's the problem: ############################################################# ############################################################# ## ## Error ## ########### ./configure: line 9675: syntax error near unexpected token `XFT,' ./configure: line 9675: ` PKG_CHECK_MODULES(XFT, xft, xft_ok=yes, xft_ok=no)' ############################################################# ############################################################# ## ## configure file ## ############ # Check whether --with-xft or --without-xft was given. if test "${with_xft+set}" = set; then withval="$with_xft" with_xft=$withval else with_xft=auto fi; if test "x$with_xft" != "xno" ; then PKG_CHECK_MODULES(XFT, xft, xft_ok=yes, xft_ok=no) if test "x$xft_ok" != "xyes"; then PKG_CHECK_MODULES(XFT, fontconfig, xft_ok=yes, xft_ok=no) if test "x$xft_ok" != "xyes"; then if test "${ac_cv_header_X11_Xft_Xft_h+set}" = set; then echo "$as_me:$LINENO: checking for X11/Xft/Xft.h" >&5 echo $ECHO_N "checking for X11/Xft/Xft.h... $ECHO_C" >&6 if test "${ac_cv_header_X11_Xft_Xft_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: $ac_cv_header_X11_Xft_Xft_h" >&5 echo "${ECHO_T}$ac_cv_header_X11_Xft_Xft_h" >&6 else # Is the header compilable? ############################################################# ############################################################# Thanks, Pierre-Luc

1 1

Update on www.inkscape.org performance issues
by Bryce Harrington 24 Dec '06

24 Dec '06

I've been continuing to investigate the problems we've been having with the website. The root issue is that we get so many hits to our website that it is overwhelming apache. Apache has been hitting its MAX_CLIENTS limit. Unfortunately, simply increasing MAX_CLIENTS isn't doable because we only have 1G of memory available. We've also been maxing out our ip_conntrack_count limit periodically (which is really bad, because it disables all the other sites sharing the box with us at OSUOSL). I've hooked up squid as a transparent caching proxy, which hopefully should help a good deal, as it'll cache our php pages and avoid reexecuting those scripts. Should make the site work faster too. Whether it'll actually solve the problem remains to be seen though, so please let me know if you notice the site down again. Bryce

2 2

Blur Radius Scales
by Daniel Pope 23 Dec '06

23 Dec '06

Hi, last weekend I took a moment to download an SVN build and posted a few observations to the tracker. One particular wishlist item which I suggested was tweaking the blur scale from linear to quadratic, which in my experimentation seemed to give me a much more even control over how much blur to apply, because I was finding the current scale, and certainly the slider, useless for the subtle effects. I've found as I've used Inkscape more over the course of the week that generally the upper 70% of the scale is useless for my purposes. I've uploaded a comparison of the current and my proposed blur scales[1] to the tracker and would like to request comments. Merry Xmas/whatever else you are celebrating, Dan [1] http://sf.net/tracker/download.php?group_id=93438&atid=604309&file_id=20833…

1 0

Re: [Inkscape-devel] Would it be possible to add support for opacity greater than 100%
by Kevin Baragona 22 Dec '06

22 Dec '06

It would be a straight multiplier to the alpha of the pixels, just like how (i think) it is now except you could also make something 'more' opaque than normal. This would be useful for say blurred objects that became too transparent. I am pretty sure this would invalidate the css according to w3c but isn't that why there is inkscape-svg and plain-svg? When saving to plain-svg a file with something like 250% opacity, it could be layered like 2 100% objects and a 50% object which I believe would then be ok. Thanks, Kevin

3 2

Layers Opacity %?
by John Bintz 22 Dec '06

22 Dec '06

I noticed that, while all of the other 0..1 ranges have been changed to 0..100%, the Layers Dialog opacity has not. I have the code to make this change almost ready, but I wanted to ask two things before I committed anything: 1. Since it's close to a release, should I hold off on this change? 2. The Fill & Stroke dialog for Opacity and Blur places the percent signs outside of the SpinButtons, in the labels. Should the Layer Opacity be the same (the label now becoming "Opacity %:") or should it be like the Zoom control (% in the SpinButton itself)? Thanks, John

3 2

[Fwd: SCALE to host Birds of a Feather Sessions!]
by jtaber 21 Dec '06

21 Dec '06

I don't think many of us were able to submit a paper/full presentation but how about an Inkscape BOF? It would be cool to have a few of us give 15 min demos of how we're using some Inkscape features in our line of work - I'll volunteer to show off how I'm using it with GIS (nodes, layers, potrace). Anyone else interested ? John -------- Original Message -------- Subject: SCALE to host Birds of a Feather Sessions! Date: Wed, 20 Dec 2006 11:23:00 -0800 From: Gareth J. Greenaway <g@...1153...> Organization: Southern California Linux Expo To: Gareth J. Greenaway <g@...1153...> “BoF”s are “Birds of a Feather” sessions. They're intended for those who would like to get together with others with interest in a similar subject. Linux Expo of SoCal would like to host your BoF at the Fifth Annual So Cal Linux Expo February 10th & 11th, 2007. The BoF sessions will be 45 minutes to 1 hour long. If you'd like to organize a BoF at SCALE, the Expo will publicize it and host it for you. Please send the following info for consideration to g@...1153...: - Title of the BoF - Brief description of BoF topic - Group hosting the BoF - Contact person for BoF (discussion leader/moderator,etc) Thank you and we look forward to seeing you at SCALE 5x Gareth -- Gareth J. Greenaway | g@...1153... Voice - 877-831-2569 x130 Southern California Linux Expo http://www.socallinuxexpo.org

3 3

Re: [Inkscape-devel] [Fwd: SCALE to host Birds of a Feather Sessions!]
by jtaber 21 Dec '06

21 Dec '06

Gareth J. Greenaway wrote: > I think this would make a good BoF, showing Inkscape and SVG in real life > situation so people can see an example of open source in the real world. > > Would someone mind emailing me the details that I had requested for in the > original email and I'll add this idea to the list of potential BoFs for > consideration? Thanks. > > Gareth > If someone else wants to take the lead here, fine. Otherwise, I'll set this up with Gareth. Josh, if you're coming, one of your tablet drawing demos would be great. Maybe someone could show off the gradient, filters stuff. btw, Happy Holidays to all

1 0

Re: [Inkscape-devel] [Fwd: SCALE to host Birds of a Feather Sessions!]
by Ted Gould 21 Dec '06

21 Dec '06

On Thu, 2006-12-21 at 09:06 -0800, Gareth J. Greenaway wrote: > I think this would make a good BoF, showing Inkscape and SVG in real life > situation so people can see an example of open source in the real world. > > Would someone mind emailing me the details that I had requested for in the > original email and I'll add this idea to the list of potential BoFs for > consideration? Thanks. John, Do you want to write this up? I'm putting in a vote for you being in charge ;) --Ted

2 1

release until January 12th ? was [Fwd: Inkscape auf c't-Software-DVD]
by Adib Taraben 20 Dec '06

20 Dec '06

Hello, the german computer mag "ct" wants to bundle inkscape again on one of their add CD. So the question is: Is there a chance to get the release out until January 12th ? I think the answer is NO but want to make shure and wait for your answer. Thx, Adib. -------- Original-Nachricht -------- Betreff: Inkscape auf c't-Software-DVD Datum: Tue, 19 Dec 2006 16:55:52 +0100 Von: Peter König <pek@...883...> An: Colin Marquardt <colin@...384...>, Adib Taraben <taraben.a@...50...> Hallo, ich weiß, die Lizenz erlaubt es auch ohne Nachfrage, und wir haben auch schon mal die generelle Freigabe bekommen, aber ich wollte doch gerne Bescheid geben: 8-) Die Heft-DVD der c't-Ausgabe 4/2007 soll wieder einmal eine aktuelle Version von Inkscape enthalten. "Einsendeschluss" der Software ist der 12.01.2007. Ist bis dahin ein neuer Build zu erwarten? (Leider erreiche ich gerade inkscape.org nicht, ist die Seite down?) Danke und mit vielen Grüßen, Peter König c't - Magazin für Computertechnik http://www.heise.de/ct/ Heise Zeitschriften Verlag GmbH & Co.KG phone: 0511-5352-763 Helstorfer Str. 7 fax: 0511-5352-417 D-30625 Hannover, Germany eMail: pek@...883...

4 3

Missing cairomm when cross-compiling
by Daniel Díaz 19 Dec '06

19 Dec '06

Hello, all! I think I downloaded the latest bundle for cross-compiling to win32, but I'm getting these errors. Since it's been a while since I last made a build, I'm sure I'm missing something but can't find exactly what. Here's an excerpt of the errors when compiling: -----8<----------8<----------8<----------8<----------8<----- make[1]: Entering directory `/home/inkscape/source/inkscape.win32/src' i686-pc-mingw32-g++ -Wall -g -O3 -mms-bitfields -DVERSION=\"0.45+devel\" -DXP_WIN -D_INTL_REDIRECT_INLINE -DHAVE_CONFIG_H -DWITH_INKBOARD -DHAVE_SSL -I. -I.. -I../.. -I../cxxtest -DGLIBMM_DLL -I/target/include/glibmm-2.4 -I/target/lib/glibmm-2.4/include -I/target/include/gtkmm-2.4 -I/target/lib/gtkmm-2.4/include -I/target/include/gdkmm-2.4 -I/target/lib/gdkmm-2.4/include -I/target/include/pangomm-1.4 -I/target/include/atkmm-1.6 -I/target/include/cairo -I/target/include/sigc++-2.0 -I/target/lib/sigc++-2.0/include -I/target/include/gtk-2.0 -I/target/lib/gtk-2.0/include -I/target/include/atk-1.0 -I/target/include/pango-1.0 -I/target/include/glib-2.0 -I/target/lib/glib-2.0/include -I/target/include -Wno-comment -I/target/perl/lib/CORE -I/target/python/include -I/target/include/libxml2 -I/target/include/freetype2 -I. -Idom -Idom/svg -Idom/js -Idom/js/fdlibm -Idom/io -Idom/odf -Idom/util -Ilibcroco -Idisplay -Iwidgets -Iextension -Iextension/internal -Iextension/internal/libwpg -Iextension/implementation -Iextension/script -Iremoveoverlap -Igraphlayout -Ilibnrtype -Isvg -Ilibcola -Ixml -Idebug -Iapplication -Ihelper -Idialogs -Ilibvpsc -Ilibvpsc/pairingheap -Itraits -Ipedro -Ilivarot -Ilibavoid -Itrace -Itrace/potrace -Iui -Iui/widget -Iui/dialog -Iui/view -Ijabber_whiteboard -Ijabber_whiteboard/dialog -Ialgorithms -Ilibnr -Iutil -Iinkjar -Iio -c -o application/editor.o application/editor.cpp In file included from /target/include/glibmm-2.4/glibmm/ustring.h:32, from ./document.h:29, from application/editor.cpp:31: /target/lib/glibmm-2.4/include/glibmmconfig.h:21:1: warning: "GLIBMM_DLL" redefined <command line>:7:1: warning: this is the location of the previous definition In file included from /target/include/gtkmm-2.4/gtkmm/widget.h:28, from /target/include/gtkmm-2.4/gtkmm/container.h:29, from /target/include/gtkmm-2.4/gtkmm/box.h:29, from ./ui/view/edit-widget.h:20, from application/editor.cpp:39: /target/include/pangomm-1.4/pangomm/context.h:42:29: cairomm/context.h: No such file or directory /target/include/pangomm-1.4/pangomm/context.h:43:33: cairomm/fontoptions.h: No such file or directory In file included from /target/include/gtkmm-2.4/gtkmm/widget.h:28, from /target/include/gtkmm-2.4/gtkmm/container.h:29, from /target/include/gtkmm-2.4/gtkmm/box.h:29, from ./ui/view/edit-widget.h:20, from application/editor.cpp:39: /target/include/pangomm-1.4/pangomm/context.h:333: error: `Cairo' has not been declared /target/include/pangomm-1.4/pangomm/context.h:333: error: expected `,' or `...' before '<' token /target/include/pangomm-1.4/pangomm/context.h:333: error: ISO C++ forbids declaration of `RefPtr' with no type /target/include/pangomm-1.4/pangomm/context.h:336: error: `Cairo' has not been declared /target/include/pangomm-1.4/pangomm/context.h:336: error: expected `,' or `...' before '&' token /target/include/pangomm-1.4/pangomm/context.h:336: error: ISO C++ forbids declaration of `FontOptions' with no type /target/include/pangomm-1.4/pangomm/context.h:339: error: `Cairo' has not been declared /target/include/pangomm-1.4/pangomm/context.h:339: error: ISO C++ forbids declaration of `FontOptions' with no type /target/include/pangomm-1.4/pangomm/context.h:339: error: expected `;' before "get_font_options" ----->8---------->8---------->8---------->8---------->8----- Where can I get this glib-/cairomm stuff? Thanks and greetings! Daniel Díaz yosoy@...31...

1 0

Feature request
by Vladimir Savic 18 Dec '06

18 Dec '06

Because of some, to me unknown reason, sourceforge wont let me log in. So, I'm going to post this to the list directly and ask someone to fill regular report in my name. If the idea is worth enough, of course. What I really need is one more information in secondary toolbar of selection tool. It's rotation angle. I know it's available through Transform dialog, but it's incapable of noticing any changes happening on using second click and rotating object(on-canvas editing). I see Transform dialog as a perfect tool for a technical drawings but not for casual illustrative jobs. Right now, if I accidentally rotate an object (line for example) it's practically impossible to bring it back into original position. Of course, I'm aware of Undo, but that's not really a solution. Thanks for your attention, Vlada

2 2

Require GTK 2.8+ for Inkscape 0.45
by Aaron Spike 18 Dec '06

18 Dec '06

If you think back to our last release a decision was made to hold back on inflating our GTK requirements until the 0.45 release. 0.45 time has come and we will now officially be requiring GTK 2.8+. Is this correct? If I am not mistaken GTK 2.8 requires Cairo. This is good for us. I've been researching creating runtime checks for cairo's availability. If we agree on GTK 2.8, I won't have to worry about that. We may, however, want to consider runtime checks for the PDF backend. I've been looking into relaytool as a method for doing this on linux. http://autopackage.org/apbuild-relaytool.php I would appreciate assistance investigating this. Aaron Spike

10 27

Pango and Inkscape.app on mac os x
by jiho 17 Dec '06

17 Dec '06

Hello, This question is more oriented toward Michael Wybrow or any other developper who helped with the packaging of Inkscape inside an .app bundle on Mac OS X. I am trying to use DarwinPorts rather than Fink to provide Inkscape with its dependencies and everything seems to work except for Pango. What I did to get osx-app.sh working with DarwinPorts was simply to: - change SW=/sw to SW=/opt/local (DarwinPorts install root) - change the version numbers of GTK and Pango (2.4.0 and 1.4.0) to those used in DarwinPorts (2.10.0 and 1.5.0) I checked the app bundle which seems to be OK: all dependecies were correctly pulled out DarwinPorts tree and copied into the bundle. The pango.modules, pangorc and pangox.aliases files are similar to those found in a working bundle produced with Fink, as are the files in .inkscape-etc and all only reflect the version change in Pango. To sum up, everything looks to be similar to what works with Fink. However, when starting Inkscape from inside the app bundle and I get this message: (inkscape-bin:18144): Pango-WARNING **: No builtin or dynamically loaded modules were found. Pango will not work correctly. This probably means there was an error in the creation of: '/opt/local/etc/pango/pango.modules' You should create this file by running pango-querymodules. [... many other Pango-WARNINGs about bad fonts...] and in Inkscape all UI fonts are replaced by rectangles. Before running Inkscape binary a shell script sets PANGO_RC_FILE to "$HOME/.inkscape-etc/pangorc" (and .inkscape-etc/pangorc points to the libs inside the bundle). My understanding is that it makes Pango libraries/modules independent from where they were compiled, and it works with Fink-provided Pango librairies. The reference to /opt/ local/ here makes me think that there is still a link between Pango libs inside the bundle and the place where they were compiled. Was anything else than setting PANGO_RC_FILE necessary to get Fink Pango libs to work from inside Inskcape.app? Any additional knowledge on the bundling process would probably help because I only know what gathered from the code and some Google searches. Thanks in advance. NB: the file '/opt/local/etc/pango/pango.modules' exists and is only root writable, hence the error. But this would be true for its Fink equivalent also and Inkscape.app should not try to write anything in this location anyway. JiHO --- http://jo.irisson.free.fr/

1 0

Book update
by Tavmjong Bah 16 Dec '06

16 Dec '06

Hello, I have uploaded a new version of my book "A Guide to Inkscape" to my web site. Although there is only a small amount of new material, there is one change of note: the html files now use the names of the chapters and/or sections. This will prevent breakage of links to the pages (e.g. from the mailing lists) when new material is added and the chapter or section numbers change. Recent links in the mailing lists should not be broken as I've included copies of the html files at the old addresses. There is also the beginnings of a Dutch translation by Tom Nijns. So far only the introduction is translated. I've set up a Lulu account where PDF versions of the book can be downloaded (both in A4 and Letter size). The downloads will be available for free for the next few days. After that I plan on charging for the PDF version of the book (probably $7.50), the web version will, of course, remain free. Please let me know of any problems with the downloads. Book's website: http://tavmjong.free.fr/INKSCAPE/ Lulu website: http://stores.lulu.com/tavmjong Tav

1 0

Hardware Technical Questions
by unknown＠example.com 16 Dec '06

16 Dec '06

Hi, all. I've been a regular Inkscape user since shortly after the fork from sodipodi. I love the program, transitioning from Xara on Windows to Inkscape on Linux has been good, if not always easy. So I'm always excited to get the newest releases of Inkscape with all kinds of great usable features. (Blur is a lifesaver for me - I've been using the nightly builds for a lot of work recently because of that!) I'm interested in helping the project, but I'm limited in what I can do. I'm not a coder, and I'd love to learn but don't have the time at the moment. I'm actually a graphic designer, which is why I use Inkscape heavily. Anyway, one of the ways that I would like to help, at least peripherally, is to write an article about building a Linux graphic workstation that's optimized for 2-d graphic apps, primarily Inkscape and the Gimp. I have been trying to understand the basics of how hardware rendering of graphic data really works in order to get a handle on this myself, but I haven't found anything readily available to tell me this info. That's why I want to write it. I'm wondering if any of you (singular or multiple people) would be interested in helping me understand some basics so that I can write a very useful article. Please contact me if you are interested in helping. Thanks.

5 4

Time to unpause 0.45 release?
by Bryce Harrington 16 Dec '06

16 Dec '06

Hi all, A few weeks back we decided to put the release on pause to give time for additional work on the PDF extension. Could someone outline the status of this work, and if it is still necessary for this to be blocking the release? If not, would anyone have an issue if we resumed the release process at this point? I find myself with some unexpected extra freetime this month that I could devote to assisting with the release. Bryce

4 11

Difference between inkview and inkscape -s?
by Tim Dwyer 15 Dec '06

15 Dec '06

Hi All, In the past I have found inkview to be a very handy tool for quickly looking at svg, but lately it seems horribly broken (see bug 1592467). Then I discovered that "inkscape -s" seems to be more or less the same thing... but it doesn't crash. What's the difference between inkview and "inkscape -s"? Do we really need the maintenance and bloat of two separate binaries? Sorry if I've missed any on-going discussion on this. Thanks heaps Tim

3 5

[Fwd: Re: [Inkscape-user] Inkscape 0.45 About Screen Contest]
by Jon Phillips 15 Dec '06

15 Dec '06

-------- Forwarded Message -------- > From: Jon Phillips <jon@...235...> > To: Inkscape User Community <inkscape-user(a)lists.sourceforge.net> > Cc: Inkscape Devel List <inkscape-devel(a)lists.sourceforge.net> > Subject: Re: [Inkscape-user] [Inkscape-devel] Inkscape 0.45 About > Screen Contest > Date: Fri, 15 Dec 2006 11:24:14 -0800 > > On Fri, 2006-12-15 at 12:14 -0700, Joshua A. Andler wrote: > > Jon Phillips wrote: > > > On Fri, 2006-12-15 at 11:47 -0700, Joshua A. Andler wrote: > > >> The contest begins today and the deadline is December 31st. As with the > > >> past few contests we've had, it is being done on DeviantART. You can > > >> find out more about it at: > > >> > > >> http://inkscapers.deviantart.com/journal/11071733/ > > >> > > >> Good Luck! > > >> > > >> -Josh > > > > > > What, I thought you were going to email me the announcement first before > > > launching this to coordinate? > > > > Hmmm... I had sent an email yesterday morning and since I had not heard > > back in 24 hours I went ahead and posted it to give people enough time > > before the end of the month. It doesn't look like it got returned > > either. :-/ > > > > Are there changes you'd like? > > > > -Josh > > I never received it...nor was I pinged...quoting the last email I > received from you: > > "If your end is ready to go, I'll shoot you a direct email with the > announcement prior to posting it so we can make sure everything looks > good. It never hurts to have another set of eyes look it over." > > I guess its done now and out...total bummer :( > > Jon > > > > > > > ------------------------------------------------------------------------- > > Take Surveys. Earn Cash. Influence the Future of IT > > Join SourceForge.net's Techsay panel and you'll get the chance to share your > > opinions on IT & business topics through brief surveys - and earn cash > > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > > _______________________________________________ > > Inkscape-user mailing list > > Inkscape-user(a)lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/inkscape-user -- Jon Phillips San Francisco, CA USA PH 510.499.0894 jon@...235... http://www.rejon.org MSN, AIM, Yahoo Chat: kidproto Jabber Chat: rejon@...896... IRC: rejon@...897...

1 0

[Fwd: Re: [Inkscape-user] Inkscape 0.45 About Screen Contest]
by Jon Phillips 15 Dec '06

15 Dec '06

-------- Forwarded Message -------- > From: Jon Phillips <jon@...235...> > To: Aaron Spike <aaron@...749...> > Cc: Inkscape User Community <inkscape-user(a)lists.sourceforge.net>, > Inkscape Devel List <inkscape-devel(a)lists.sourceforge.net> > Subject: Re: [Inkscape-user] [Inkscape-devel] Inkscape 0.45 About > Screen Contest > Date: Fri, 15 Dec 2006 11:32:30 -0800 > > On Fri, 2006-12-15 at 13:29 -0600, Aaron Spike wrote: > > Joshua A. Andler wrote: > > > Are there changes you'd like? > > > > Accept entries only if they are accompanied by the original SVG! We've > > lost way too much time in the past waiting on a usable format. (Wish I > > could remember if I had any other complaints. I should write this stuff > > down.) > > > > Aaron Spike > > ccHost totally can handle all these things and has it all built-in...I > think though since its already announced publicly, its too hard to > change... > > Jon > -- Jon Phillips San Francisco, CA USA PH 510.499.0894 jon@...235... http://www.rejon.org MSN, AIM, Yahoo Chat: kidproto Jabber Chat: rejon@...896... IRC: rejon@...897...

1 0

If a feature falls in a wood and no one hears it ... ?
by Alan Horkan 15 Dec '06

15 Dec '06

How many people knew Inkscape had spell checking? (Rhetorical.) https://sourceforge.net/tracker/index.php?func=detail&aid=1605259&group_id=… How can such a valuable feature be omitted and can it be enabled by default in time for the next release? Normally I avoid crossposting but I feel I am doing Inkscape users a service by informing or reminding them about this feature. Are there any other fantastic features like this hidden away and awaiting rediscovery? Sincerely Alan Horkan http://advogato.org/person/AlanHorkan/ http://alanhorkan.livejournal.com/

1 0

Bughunting
by Engelen, J.B.C. (Johan) 14 Dec '06

14 Dec '06

Bryce wrote: > 1576258 3 Color artifact in SVN gaussian blur > nobody > 1612814 3 Guides ans Gridlines vanish on corresp. alpha... > nobody > 1513218 6 Win32: ask if old menus.xml should be kept > when... theadib > -------------------------------------------------------------- > ---------- > Total 12 I've fixed another bug that (as far as I looked) is not in the bugtracker. Does that count? ;) When ungrouping, the transformation of the group was applied to the individual items, but not correctly written back to XML. Noticeable when undo+redo'ing. It's fixed now To see what I mean try: LaTeX render 'ab' ungroup ungroup undo redo Incidentally it meant fixing a "FIXME" in the code, of which there are a lot :S Happy hunting! Johan

2 1

Re: [Inkscape-devel] Bughunting
by John Bintz 14 Dec '06

14 Dec '06

Engelen, J.B.C. (Johan) said: > I've fixed another bug that (as far as I looked) is not in the bugtracker. > Does that count? ;) Along the same lines, I've gotten one in the bugtracker that is ready to be closed, but I don't have permissions to do so: [ 1604391 ] MouseWheel NodeSelection > Undo = Floating Node http://sourceforge.net/tracker/index.php?func=detail&aid=1604391&group_id=9… Thanks, John

2 1

autosave on crash
by Henning Lorenz 14 Dec '06

14 Dec '06

During an Inkscape crash a popup-window was displayed announcing that backups of the open files have been created automatically. This is a very nice feature, however I can't find the files on the system (I tried with locate after an update of its database). Is there a known problem with the function or the filename? Cheers, Hennig

2 1

closing bug [ 1513218 ] Win32: ask if old menus.xml should be kept when installing
by Adib Taraben 14 Dec '06

14 Dec '06

Just inform you all that I commited a patch that solves [ 1513218 ] Win32: ask if old menus.xml should be kept when installing priority 7 bug. I found the solution while installing latest vlc ;-) Adib.

2 1

Re: [Inkscape-devel] Inkscape 0.45 - About Screen and moving forward
by Joshua A. Andler 13 Dec '06

13 Dec '06

Jon Phillips wrote: > On Wed, 2006-12-13 at 12:00 -0700, Joshua A. Andler wrote: >> I know you said if I don't hear from you, which I didn't, so I just >> wanted to verify that I should I move forward with it. >> >> -Josh > > No, lets launch it through OCAl with the deviantart community. > > What will it entail... So you got CCHost up and running? On the DA end, basically all I need to do is announce it via both inkscape accounts and that would be all. If your end is ready to go, I'll shoot you a direct email with the announcement prior to posting it so we can make sure everything looks good. It never hurts to have another set of eyes look it over. -Josh

2 1

Re: [Inkscape-devel] Inkscape 0.45 - About Screen and moving forward
by Joshua A. Andler 13 Dec '06

13 Dec '06

I know you said if I don't hear from you, which I didn't, so I just wanted to verify that I should I move forward with it. -Josh Jon Phillips wrote: > Heya, give me till the end of the day to get ccHost up and running so we > can do through OCAL. If you don't hear from me, then we can move it onto > deviant art...cool? > > Jon > > > On Tue, 2006-12-12 at 15:04 -0700, Joshua A. Andler wrote: >> Hi All, >> >> I'm going to be setting up the About Screen contest on deviantART again. >> >> When should the deadline be? >> >> Any special requests for required new techniques/features other than >> using Blur in it? >> >> One more thing... before I can start this contest I need to make sure we >> have reasonably up-to-date packages available for the big 3 platforms. >> >> Win32 is 2 days old which is definitely okay. >> Linux Autopackage is 10 days old which isn't too terribly bad. >> OSX is a problem though as it's 2 months old as of today. >> >> Anyone know who to contact for the OSX stuff? >> >> The sooner I get responses, the sooner we can get the ball rolling on >> this. :) >> >> -Josh >> >> >> ------------------------------------------------------------------------- >> Take Surveys. Earn Cash. Influence the Future of IT >> Join SourceForge.net's Techsay panel and you'll get the chance to share your >> opinions on IT & business topics through brief surveys - and earn cash >> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV >> _______________________________________________ >> Inkscape-devel mailing list >> Inkscape-devel(a)lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/inkscape-devel

1 0

will there be new test versions for 0.45/win32?
by momo 13 Dec '06

13 Dec '06

Hello, Since the bug hunting has begun for the 0.45 version, I have a question about the download locations listed in http://www.inkscape.org/download/ - The versions at http://inkscape.modevia.com/win32-snap/?M=D are desperately old (25 oct 2005) - http://cortijodelrio.net/~inkscape/win32/ is dead for more than a month already - http://inkscape.modevia.com/win32/?M=D the most fresh version is from the 10 dec 2005 Will there be everyday compiled fresh win32 test versions to play with in the close future? Thanks! Molumen

4 3

svg fonts
by Alexandre Prokoudine 13 Dec '06

13 Dec '06

Hi, Just to make sure... http://wiki.inkscape.org/wiki/index.php/SVG_Tiny_Compliance states that massifr started working on support for SVG fonts a while ago. Is there any update on this? Alexandre

1 0

Inkscape 0.45 - About Screen and moving forward
by Joshua A. Andler 13 Dec '06

13 Dec '06

Hi All, I'm going to be setting up the About Screen contest on deviantART again. When should the deadline be? Any special requests for required new techniques/features other than using Blur in it? One more thing... before I can start this contest I need to make sure we have reasonably up-to-date packages available for the big 3 platforms. Win32 is 2 days old which is definitely okay. Linux Autopackage is 10 days old which isn't too terribly bad. OSX is a problem though as it's 2 months old as of today. Anyone know who to contact for the OSX stuff? The sooner I get responses, the sooner we can get the ball rolling on this. :) -Josh

3 2

Re: [Inkscape-devel] Inkscape 0.45 - About Screen and moving forward
by Joshua A. Andler 12 Dec '06

12 Dec '06

Sure man, no problem... :) Jon Phillips wrote: > Heya, give me till the end of the day to get ccHost up and running so we > can do through OCAL. If you don't hear from me, then we can move it onto > deviant art...cool? > > Jon > > > On Tue, 2006-12-12 at 15:04 -0700, Joshua A. Andler wrote: >> Hi All, >> >> I'm going to be setting up the About Screen contest on deviantART again. >> >> When should the deadline be? >> >> Any special requests for required new techniques/features other than >> using Blur in it? >> >> One more thing... before I can start this contest I need to make sure we >> have reasonably up-to-date packages available for the big 3 platforms. >> >> Win32 is 2 days old which is definitely okay. >> Linux Autopackage is 10 days old which isn't too terribly bad. >> OSX is a problem though as it's 2 months old as of today. >> >> Anyone know who to contact for the OSX stuff? >> >> The sooner I get responses, the sooner we can get the ball rolling on >> this. :) >> >> -Josh >> >> >> ------------------------------------------------------------------------- >> Take Surveys. Earn Cash. Influence the Future of IT >> Join SourceForge.net's Techsay panel and you'll get the chance to share your >> opinions on IT & business topics through brief surveys - and earn cash >> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV >> _______________________________________________ >> Inkscape-devel mailing list >> Inkscape-devel(a)lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/inkscape-devel

1 0

Re: [Inkscape-devel] [Inkscape-user] Inkscape site slow?
by Bryce Harrington 12 Dec '06

12 Dec '06

On Sun, Dec 10, 2006 at 03:40:23PM +0100, Jasper van de Gronde wrote: > Is it just me or do other people also experience rediculous load times > for the Inkscape site? (homepage and Wiki main page, I didn't dare go > any further) With rediculous I mean something like a minute, or even > several minutes. I noticed there were problems yesterday and restarted apache. Looking at it now, I see an error: [Sun Dec 10 05:59:12 2006] [error] server reached MaxClients setting, consider raising the MaxClients setting I went ahead and raised the MaxClients settings in the config by a factor of about 4 and restarted. Seems to be ok now. Please keep an eye on the site and report here if it again becomes a problem; getting things properly tuned could take a few iterations. Bryce

3 4

Faster gaussian blur
by Jasper van de Gronde 11 Dec '06

11 Dec '06

I have modified Inkscape's blur filter to operate in linear time using a method that gives a very good approximation of a gaussian blur using a small IIR filter (falling back on a heavily modified version of the old code for very small kernel sizes, as the IIR filter doesn't handle those well). This means that the time needed to compute a blur doesn't depend on the size of the kernel (except for the fact that larger borders are needed for larger kernels). I'm posting it here for feedback, if people think this is a good idea I'll clean up some last things and submit it to the patch tracker. Also, I wouldn't mind some testing, I only tested with a simple image with a blurred rectangle and gallardo.svgz (the latter has quite a nice collection of blurs). When rendering gallardo.svgz using the new code cuts the total time spent in FilterGaussian::render roughly in half (on my computer it is 30-40%, so 50% should be quite attainable), compared to the SVN implementation using average(!) quality, while being virtually indistinguishable from best(!) quality rendering. I have seen some differences on certain test drawings in my test application, but for a rendering of gallardo.svgz the maximum difference was 1 and didn't occur often (and could be due to slightly different rounding, numerical errors, etc.). In my patch I completely eliminated the old resampling stuff, but I could also imagine keeping it to let people speed up gaussian blur even more. Some things I know of that could be done to make it faster/smaller/etc.: - Currently it uses either the IIR filter or the FIR filter for both the X and Y directions, which could in theory result in bad performance on blurs where the deviation is high in only one direction. There is no technical reason preventing this decision to be made separately for the X and Y directions though (I just haven't come around to doing that). - Code for the X and Y directions could be merged, as they are so similar that only the bounds and some strides differ (might have a negative impact on performance though, would have to be timed). - A fixed-point format could be used for the intermediate values in the IIR filter (I already experimented with this in a test application, it works quite well and is slightly faster, probably more so on older hardware). - Currently temporary storage is used to store the intermediate values for an entire row/column for the IIR filter. This isn't strictly necessary (but probably provides slightly better quality and without it the values would need to be clipped when storing them, at least in my tests). BTW, I also made a small change to how the normal gaussian kernel is calculated which results in slightly higher quality blurs but can make direct comparison with the old code harder (the step size wasn't very accurate for small kernel sizes, resulting in a blur that could be quite visibly different from the correct one). So when evaluating the performance of the IIR filter it should be compared to the output of the FIR filter in the new code. Index: src/display/nr-filter-gaussian.cpp =================================================================== --- src/display/nr-filter-gaussian.cpp (revision 13436) +++ src/display/nr-filter-gaussian.cpp (working copy) @@ -6,13 +6,16 @@ * Authors: * Niko Kiirala <niko@...1267...> * bulia byak + * Jasper van de Gronde <th.v.d.gronde@...528...> * * Copyright (C) 2006 authors * * Released under GNU GPL, read the file 'COPYING' for more information */ +#include <algorithm> #include <cmath> +#include <complex> #include <glib.h> using std::isnormal; @@ -24,6 +27,37 @@ #include "libnr/nr-matrix.h" #include "prefs-utils.h" +// IIR filtering method based on: +// L.J. van Vliet, I.T. Young, and P.W. Verbeek, Recursive Gaussian Derivative Filters, +// in: A.K. Jain, S. Venkatesh, B.C. Lovell (eds.), +// ICPR'98, Proc. 14th Int. Conference on Pattern Recognition (Brisbane, Aug. 16-20), +// IEEE Computer Society Press, Los Alamitos, 1998, 509-514. +// +// Using the backwards-pass initialization procedure from: +// Boundary Conditions for Young - van Vliet Recursive Filtering +// Bill Triggs, Michael Sdika +// IEEE Transactions on Signal Processing, Volume 54, Number 5 - may 2006 + +// Number of IIR filter coefficients used. Currently only 3 is supported. +// "Recursive Gaussian Derivative Filters" says this is enough though (and +// some testing indeed shows that the quality doesn't improve much if larger +// filters are used). +const size_t N = 3; + +template<typename InIt, typename OutIt, typename Size> +void copy_n(InIt beg_in, Size N, OutIt beg_out) { + std::copy(beg_in, beg_in+N, beg_out); +} + +typedef double Value; // Type used for filter coefficients (can be 10.21 fixed point) +template<typename T> inline T sqr(T const v) { return v*v; } + +template<typename Tt, typename Ts> +Tt round_cast(Ts const& v) { + static Ts const rndoffset(.5); + return static_cast<Tt>(v+rndoffset); +} + namespace NR { FilterGaussian::FilterGaussian() @@ -45,211 +79,39 @@ { int length_x = _effect_area_scr_x(trans); int length_y = _effect_area_scr_y(trans); - return _max(length_x, length_y) * 2 + 1; + return std::max(length_x, length_y) + 1; } void FilterGaussian::_make_kernel(double *kernel, double deviation, double expansion) { - double length = deviation * 3.0; - int scr_len = (int)std::floor(length * expansion); - if(scr_len < 1) scr_len = 1; - double d_sq = deviation * deviation * 2; - double step = length / scr_len; + int const scr_len = (int)std::ceil(deviation * 3.0 * expansion); + double const d_sq = sqr(deviation * expansion) * 2; + // Compute kernel and sum of coefficients + // Note that actually only half the kernel is computed, as it is symmetric double sum = 0; - for ( int i = 0; i < scr_len * 2 + 1 ; i++ ) { - double i_sq = (step * i - length) * (step * i - length); - sum += (std::exp(-i_sq / d_sq) / std::sqrt(M_PI * d_sq)); + for ( int i = 0; i <= scr_len ; i++ ) { + kernel[i] = std::exp(-sqr(i) / d_sq); + sum += kernel[i]; } + sum = 2*sum - kernel[0]; // the sum of the complete kernel is twice as large (minus the center element to avoid counting it twice) - for ( int i = 0; i < scr_len * 2 + 1 ; i++ ) { - double i_sq = (step * i - length) * (step * i - length); - kernel[i] = (std::exp(-i_sq / d_sq) / std::sqrt(M_PI * d_sq)) / sum; + // Normalize kernel + for ( int i = 0; i <= scr_len ; i++ ) { + kernel[i] /= sum; } } int FilterGaussian::_effect_area_scr_x(Matrix const &trans) { - int ret = (int)std::floor(_deviation_x * 3.0 * trans.expansionX()); - if(ret < 1) ret = 1; - return ret; + return (int)std::ceil(_deviation_x * 3.0 * trans.expansionX()); } int FilterGaussian::_effect_area_scr_y(Matrix const &trans) { - int ret = (int)std::floor(_deviation_y * 3.0 * trans.expansionY()); - if(ret < 1) ret = 1; - return ret; + return (int)std::ceil(_deviation_y * 3.0 * trans.expansionY()); } -int FilterGaussian::_effect_subsample_step(int scr_len_x, int quality) -{ - switch (quality) { - case BLUR_QUALITY_WORST: - if (scr_len_x < 8) { - return 1; - } else if (scr_len_x < 32) { - return 4; - } else if (scr_len_x < 64) { - return 8; - } else if (scr_len_x < 128) { - return 32; - } else if (scr_len_x < 256) { - return 128; - } else if (scr_len_x < 512) { - return 512; - } else if (scr_len_x < 1024) { - return 4096; - } else { - return 65536; - } - break; - case BLUR_QUALITY_WORSE: - if (scr_len_x < 16) { - return 1; - } else if (scr_len_x < 64) { - return 4; - } else if (scr_len_x < 120) { - return 8; - } else if (scr_len_x < 200) { - return 32; - } else if (scr_len_x < 400) { - return 64; - } else if (scr_len_x < 800) { - return 256; - } else if (scr_len_x < 1200) { - return 1024; - } else { - return 65536; - } - break; - case BLUR_QUALITY_BETTER: - if (scr_len_x < 32) { - return 1; - } else if (scr_len_x < 160) { - return 4; - } else if (scr_len_x < 320) { - return 8; - } else if (scr_len_x < 640) { - return 32; - } else if (scr_len_x < 1280) { - return 64; - } else if (scr_len_x < 2560) { - return 256; - } else { - return 1024; - } - break; - case BLUR_QUALITY_BEST: - return 1; // no subsampling at all - break; - case BLUR_QUALITY_NORMAL: - default: - if (scr_len_x < 16) { - return 1; - } else if (scr_len_x < 80) { - return 4; - } else if (scr_len_x < 160) { - return 8; - } else if (scr_len_x < 320) { - return 32; - } else if (scr_len_x < 640) { - return 64; - } else if (scr_len_x < 1280) { - return 256; - } else if (scr_len_x < 2560) { - return 1024; - } else { - return 65536; - } - break; - } -} - -int FilterGaussian::_effect_subsample_step_log2(int scr_len_x, int quality) -{ - switch (quality) { - case BLUR_QUALITY_WORST: - if (scr_len_x < 8) { - return 0; - } else if (scr_len_x < 32) { - return 2; - } else if (scr_len_x < 64) { - return 3; - } else if (scr_len_x < 128) { - return 5; - } else if (scr_len_x < 256) { - return 7; - } else if (scr_len_x < 512) { - return 9; - } else if (scr_len_x < 1024) { - return 12; - } else { - return 16; - } - break; - case BLUR_QUALITY_WORSE: - if (scr_len_x < 16) { - return 0; - } else if (scr_len_x < 64) { - return 2; - } else if (scr_len_x < 120) { - return 3; - } else if (scr_len_x < 200) { - return 5; - } else if (scr_len_x < 400) { - return 6; - } else if (scr_len_x < 800) { - return 8; - } else if (scr_len_x < 1200) { - return 10; - } else { - return 16; - } - break; - case BLUR_QUALITY_BETTER: - if (scr_len_x < 32) { - return 0; - } else if (scr_len_x < 160) { - return 2; - } else if (scr_len_x < 320) { - return 3; - } else if (scr_len_x < 640) { - return 5; - } else if (scr_len_x < 1280) { - return 6; - } else if (scr_len_x < 2560) { - return 8; - } else { - return 10; - } - break; - case BLUR_QUALITY_BEST: - return 0; // no subsampling at all - break; - case BLUR_QUALITY_NORMAL: - default: - if (scr_len_x < 16) { - return 0; - } else if (scr_len_x < 80) { - return 2; - } else if (scr_len_x < 160) { - return 3; - } else if (scr_len_x < 320) { - return 5; - } else if (scr_len_x < 640) { - return 6; - } else if (scr_len_x < 1280) { - return 8; - } else if (scr_len_x < 2560) { - return 10; - } else { - return 16; - } - break; - } -} - /** * Sanity check function for indexing pixblocks. * Catches reading and writing outside the pixblock area. @@ -264,6 +126,155 @@ } } +static void calcFilter(double const sigma, double b[N]) { + assert(N==3); + std::complex<double> const d1_org(1.40098, 1.00236); + double const d3_org = 1.85132; + double qbeg = 1; // Don't go lower than sigma==2 (we'd probably want a normal convolution in that case anyway) + double qend = 2*sigma; + double const sigmasqr = sqr(sigma); + double s; + do { // Binary search for right q (a linear interpolation scheme is suggested, but this should work fine as well) + double const q = (qbeg+qend)/2; + // Compute scaled filter coefficients + std::complex<double> const d1 = pow(d1_org, 1.0/q); + double const d3 = pow(d3_org, 1.0/q); + double const absd1sqr = std::norm(d1); + double const re2d1 = 2*d1.real(); + double const bscale = 1.0/(absd1sqr*d3); + b[2] = -bscale; + b[1] = bscale*(d3+re2d1); + b[0] = -bscale*(absd1sqr+d3*re2d1); + // Compute actual sigma^2 + double const ssqr = 2*(2*(d1/sqr(d1-1.)).real()+d3/sqr(d3-1.)); + if ( ssqr < sigmasqr ) { + qbeg = q; + } else { + qend = q; + } + s = sqrt(ssqr); + } while(qend-qbeg>(sigma/(1<<30))); + printf("real sigma: %g, q: %g\n", s, qend); +} + +static void calcTriggsSdikaM(double const b[N], double M[N*N]) { + assert(N==3); + double a1=b[0], a2=b[1], a3=b[2]; + double const Mscale = 1.0/((1+a1-a2+a3)*(1-a1-a2-a3)*(1+a2+(a1-a3)*a3)); + M[0] = 1-a2-a1*a3-sqr(a3); + M[1] = (a1+a3)*(a2+a1*a3); + M[2] = a3*(a1+a2*a3); + M[3] = a1+a2*a3; + M[4] = (1-a2)*(a2+a1*a3); + M[5] = a3*(1-a2-a1*a3-sqr(a3)); + M[6] = a1*(a1+a3)+a2*(1-a2); + M[7] = a1*(a2-sqr(a3))+a3*(1+a2*(a2-1)-sqr(a3)); + M[8] = a3*(a1+a2*a3); + for(size_t i=0; i<9; i++) M[i] *= Mscale; +} + +template<unsigned int SIZE> +static void calcTriggsSdikaInitialization(double const M[N*N], Value const uold[N][SIZE], Value const uplus[SIZE], Value const vplus[SIZE], Value const alpha, Value vold[N][SIZE]) { + for(size_t c=0; c<SIZE; c++) { + double uminp[N]; + for(size_t i=0; i<N; i++) uminp[i] = uold[i][c] - uplus[c]; + for(size_t i=0; i<N; i++) { + double voldf = 0; + for(size_t j=0; j<N; j++) { + voldf += uminp[j]*M[i*N+j]; + } + // Properly takes care of the scaling coefficient alpha and vplus (which is already appropriately scaled) + // This was arrived at by starting from a version of the blur filter that ignored the scaling coefficient + // (and scaled the final output by alpha^2) and then gradually reintroducing the scaling coefficient. + voldf *= alpha; + vold[i][c] = voldf; + vold[i][c] += vplus[c]; + } + } +} + +// TODO: Make filterX and filterY the same function by doing something with strides +template<typename PT, unsigned int PC> +void filterX(NRPixBlock *const in, NRPixBlock *const out, Value const b[N], double const M[N*N], Value *const tmpdata) { + size_t const w=in->area.x1-in->area.x0, h=in->area.y1-in->area.y0; + // Blur image (x) + for ( size_t y = 0 ; y < h ; y++ ) { + // corresponding line in the source and output buffer + PT const *const srcimg = reinterpret_cast<PT const *>(NR_PIXBLOCK_PX(in) + y*in->rs); + PT *const dstimg = reinterpret_cast<PT *>(NR_PIXBLOCK_PX(out) + y*out->rs); + // Border constants + Value imin[PC]; copy_n(srcimg + (0)*PC, PC, imin); + Value iplus[PC]; copy_n(srcimg + (w-1)*PC, PC, iplus); + // Forward pass + Value u[N+1][PC]; + for(size_t i=0; i<N; i++) copy_n(imin, PC, u[i]); + for ( size_t x = 0 ; x < w ; x++ ) { + for(size_t i=N; i>0; i--) copy_n(u[i-1], PC, u[i]); + copy_n(srcimg+x*PC, PC, u[0]); + for(size_t c=0; c<PC; c++) { + u[0][c] *= b[0]; + for(size_t i=1; i<N+1; i++) u[0][c] += u[i][c]*b[i]; + } + copy_n(u[0], PC, tmpdata+x*PC); + } + // Backward pass + Value v[N+1][PC]; + calcTriggsSdikaInitialization(M, u, iplus, iplus, b[0], v); + for(size_t c=0; c<PC; c++) dstimg[(w-1)*PC+c] = round_cast<PT>(v[0][c]); + size_t x=w-1; + while(x-->0) { + for(size_t i=N; i>0; i--) copy_n(v[i-1], PC, v[i]); + copy_n(tmpdata+x*PC, PC, v[0]); + for(size_t c=0; c<PC; c++) { + v[0][c] *= b[0]; + for(size_t i=1; i<N+1; i++) v[0][c] += v[i][c]*b[i]; + } + for(size_t c=0; c<PC; c++) dstimg[x*PC+c] = round_cast<PT>(v[0][c]); + } + } +} + +template<typename PT, unsigned int PC> +void filterY(NRPixBlock *const in, NRPixBlock *const out, Value const b[N], double const M[N*N], Value *const tmpdata) { + size_t const w=in->area.x1-in->area.x0, h=in->area.y1-in->area.y0; + size_t const in_rs=in->rs/sizeof(PT), out_rs=out->rs/sizeof(PT); + // Blur image (y) + for ( size_t x = 0 ; x < w ; x++ ) { + // corresponding line in the source and output buffer + PT const *const srcimg = reinterpret_cast<PT const *>(NR_PIXBLOCK_PX(in) + x*PC); + PT *const dstimg = reinterpret_cast<PT *>(NR_PIXBLOCK_PX(out) + x*PC); + // Border constants + Value imin[PC]; copy_n(srcimg + (0)*in_rs, PC, imin); + Value iplus[PC]; copy_n(srcimg + (h-1)*in_rs, PC, iplus); + // Forward pass + Value u[N+1][PC]; + for(size_t i=0; i<N; i++) copy_n(imin, PC, u[i]); + for ( size_t y = 0 ; y < h ; y++ ) { + for(size_t i=N; i>0; i--) copy_n(u[i-1], PC, u[i]); + copy_n(srcimg+y*in_rs, PC, u[0]); + for(size_t c=0; c<PC; c++) { + u[0][c] *= b[0]; + for(size_t i=1; i<N+1; i++) u[0][c] += u[i][c]*b[i]; + } + copy_n(u[0], PC, tmpdata+y*PC); + } + // Backward pass + Value v[N+1][PC]; + calcTriggsSdikaInitialization(M, u, iplus, iplus, b[0], v); + for(size_t c=0; c<PC; c++) dstimg[(h-1)*out_rs+c] = round_cast<PT>(v[0][c]); + size_t y=h-1; + while(y-->0) { + for(size_t i=N; i>0; i--) copy_n(v[i-1], PC, v[i]); + copy_n(tmpdata+y*PC, PC, v[0]); + for(size_t c=0; c<PC; c++) { + v[0][c] *= b[0]; + for(size_t i=1; i<N+1; i++) v[0][c] += v[i][c]*b[i]; + } + for(size_t c=0; c<PC; c++) dstimg[y*out_rs+c] = round_cast<PT>(v[0][c]); + } + } +} + int FilterGaussian::render(FilterSlot &slot, Matrix const &trans) { /* in holds the input pixblock */ @@ -288,262 +299,313 @@ return 0; } - /* Blur radius in screen units (pixels) */ - int scr_len_x = _effect_area_scr_x(trans); - int scr_len_y = _effect_area_scr_y(trans); + // TODO: Find the best threshold (should not be lower than 1) + // TODO: Split into separate x and y parts. + //if (_deviation_x * trans.expansionX() >= 2 && _deviation_y * trans.expansionY() >= 2 && std::abs(_deviation_x * trans.expansionX()-2.37749)>0.00001) { + // This condition was chosen based on the old code that was used to decide on how much subsampling to use. + // (Using the condition below the old code would never have used subsampling.) + if (3*std::min(_deviation_x * trans.expansionX(), _deviation_y * trans.expansionY()) >= 8) { + // new buffer for the final output, same resolution as the in buffer + NRPixBlock *out = new NRPixBlock; + nr_pixblock_setup_fast(out, in->mode, in->area.x0, in->area.y0, + in->area.x1, in->area.y1, true); + if (out->data.px == NULL) { + // alas, we've accomplished a lot, but ran out of memory - so abort + return 0; + } + size_t numChannels; + switch(in->mode) { + case NR_PIXBLOCK_MODE_A8: ///< Grayscale + numChannels = 1; + break; + case NR_PIXBLOCK_MODE_R8G8B8: ///< 8 bit RGB + numChannels = 3; + break; + case NR_PIXBLOCK_MODE_R8G8B8A8N: ///< Normal 8 bit RGBA + numChannels = 4; + break; + case NR_PIXBLOCK_MODE_R8G8B8A8P: ///< Premultiplied 8 bit RGBA + numChannels = 4; + break; + default: + assert(false); + } + Value *const tmpdata = new Value[std::max(in->area.x1-in->area.x0,in->area.y1-in->area.y0)*numChannels]; + if (tmpdata == NULL) { + nr_pixblock_release(out); + delete out; + return 0; + } - // subsampling step; it depends on the radius, but somewhat nonlinearly, to make high zooms - // workable; is adjustable by quality in -2..2; 0 is the default; 2 is the best quality with no - // subsampling - int quality = prefs_get_int_attribute ("options.blurquality", "value", 0); - int stepx = _effect_subsample_step(scr_len_x, quality); - int stepx_l2 = _effect_subsample_step_log2(scr_len_x, quality); - int stepy = _effect_subsample_step(scr_len_y, quality); - int stepy_l2 = _effect_subsample_step_log2(scr_len_y, quality); - int stepx2 = stepx >> 1; - int stepy2 = stepy >> 1; + // Filter variables + Value b[N+1]; // scaling coefficient + filter coefficients (can be 10.21 fixed point) + double bf[N]; // computed filter coefficients + double M[N*N]; // matrix used for initialization procedure (has to be double) - /* buffer for x-axis blur */ - NRPixBlock *bufx = new NRPixBlock; - /* buffer for y-axis blur */ - NRPixBlock *bufy = new NRPixBlock; + // Compute filter (x) + calcFilter(_deviation_x * trans.expansionX(), bf); + for(size_t i=0; i<N; i++) bf[i] = -bf[i]; + b[0] = 1; // b[0] == alpha (scaling coefficient) + for(size_t i=0; i<N; i++) { + b[i+1] = bf[i]; + b[0] -= b[i+1]; + } - // boundaries of the subsampled (smaller, unless step==1) buffers - int xd0 = (in->area.x0 >> stepx_l2); - int xd1 = (in->area.x1 >> stepx_l2) + 1; - int yd0 = (in->area.y0 >> stepy_l2); - int yd1 = (in->area.y1 >> stepy_l2) + 1; + // Compute initialization matrix (x) + calcTriggsSdikaM(bf, M); - // set up subsampled buffers - nr_pixblock_setup_fast(bufx, in->mode, xd0, yd0, xd1, yd1, true); - nr_pixblock_setup_fast(bufy, in->mode, xd0, yd0, xd1, yd1, true); - if (bufx->data.px == NULL || bufy->data.px == NULL) { // no memory - return 0; - } + // Filter (x) + switch(in->mode) { + case NR_PIXBLOCK_MODE_A8: ///< Grayscale + filterX<unsigned char,1>(in, out, b, M, tmpdata); + break; + case NR_PIXBLOCK_MODE_R8G8B8: ///< 8 bit RGB + filterX<unsigned char,3>(in, out, b, M, tmpdata); + break; + case NR_PIXBLOCK_MODE_R8G8B8A8N: ///< Normal 8 bit RGBA + filterX<unsigned char,4>(in, out, b, M, tmpdata); + break; + case NR_PIXBLOCK_MODE_R8G8B8A8P: ///< Premultiplied 8 bit RGBA + filterX<unsigned char,4>(in, out, b, M, tmpdata); + break; + default: + assert(false); + }; - //mid->visible_area = in->visible_area; - //out->visible_area = in->visible_area; + if ( std::abs(_deviation_x*trans.expansionX() - _deviation_y*trans.expansionY()) > 0.000001 ) { + // Compute filter (y) + calcFilter(_deviation_y * trans.expansionY(), bf); + for(size_t i=0; i<N; i++) bf[i] = -bf[i]; + b[0] = 1; // b[0] == alpha (scaling coefficient) + for(size_t i=0; i<N; i++) { + b[i+1] = bf[i]; + b[0] -= b[i+1]; + } - /* Array for filter kernel, big enough to fit kernels for both X and Y - * direction kernel, one at time */ - double kernel[_kernel_size(trans)]; - - /* 1. Blur in direction of X-axis, from in to bufx (they have different resolution)*/ - _make_kernel(kernel, _deviation_x, trans.expansionX()); + // Compute initialization matrix (y) + calcTriggsSdikaM(bf, M); + } - for ( int y = bufx->area.y0 ; y < bufx->area.y1; y++ ) { + // Filter (y) + switch(in->mode) { + case NR_PIXBLOCK_MODE_A8: ///< Grayscale + filterY<unsigned char,1>(out, out, b, M, tmpdata); + break; + case NR_PIXBLOCK_MODE_R8G8B8: ///< 8 bit RGB + filterY<unsigned char,3>(out, out, b, M, tmpdata); + break; + case NR_PIXBLOCK_MODE_R8G8B8A8N: ///< Normal 8 bit RGBA + filterY<unsigned char,4>(out, out, b, M, tmpdata); + break; + case NR_PIXBLOCK_MODE_R8G8B8A8P: ///< Premultiplied 8 bit RGBA + filterY<unsigned char,4>(out, out, b, M, tmpdata); + break; + default: + assert(false); + }; - // corresponding line in the source buffer - int in_line; - if ((y << stepy_l2) >= in->area.y1) { - in_line = (in->area.y1 - in->area.y0 - 1) * in->rs; - } else { - in_line = ((y << stepy_l2) - (in->area.y0)) * in->rs; - if (in_line < 0) - in_line = 0; + delete[] tmpdata; + + out->empty = FALSE; + slot.set(_output, out); + } else { + /* Blur radius in screen units (pixels) */ + int scr_len_x = _effect_area_scr_x(trans); + int scr_len_y = _effect_area_scr_y(trans); + + int const PC = NR_PIXBLOCK_BPP(in); + typedef unsigned char PT; + + /* buffer for blur */ + NRPixBlock *out = new NRPixBlock; + nr_pixblock_setup_fast(out, in->mode, in->area.x0, in->area.y0, + in->area.x1, in->area.y1, true); + if (out->data.px == NULL) { // no memory + return 0; } - // current line in bufx - int bufx_line = (y - yd0) * bufx->rs; + /* Array for filter kernel, big enough to fit kernels for both X and Y + * direction kernel, one at time */ + double kernel[_kernel_size(trans)]; - int skipbuf[4] = {INT_MIN, INT_MIN, INT_MIN, INT_MIN}; + // Past pixels seen (to enable in-place operation) + PT history[_kernel_size(trans)][PC]; + + int const width=in->area.x1-in->area.x0, height=in->area.y1-in->area.y0; - for ( int x = bufx->area.x0 ; x < bufx->area.x1 ; x++ ) { + /* 1. Blur in direction of X-axis, from in to bufx (they have different resolution)*/ + _make_kernel(kernel, _deviation_x, trans.expansionX()); - // for all bytes of the pixel - for ( int byte = 0 ; byte < NR_PIXBLOCK_BPP(in) ; byte++) { + for ( int y = 0 ; y < height; y++ ) { - if(skipbuf[byte] > x) continue; + // corresponding line in the source buffer + int const in_line = y * in->rs; - double sum = 0; - int last_in = -1; - int different_count = 0; + // current line in bufx + int const bufx_line = y * out->rs; - // go over our point's neighborhood on x axis in the in buffer, with stepx increment - for ( int i = -scr_len_x ; i <= scr_len_x ; i += stepx ) { + int skipbuf[4] = {INT_MIN, INT_MIN, INT_MIN, INT_MIN}; - // the pixel we're looking at - int x_in = (((x << stepx_l2) + i + stepx2) >> stepx_l2) << stepx_l2; + // history initialization + PT imin[PC]; copy_n(NR_PIXBLOCK_PX(in) + in_line, PC, imin); + for(int i=0; i<scr_len_x; i++) copy_n(imin, PC, history[i]); - // distance from it to the current x,y - int dist = x_in - (x << stepx_l2); - if (dist < -scr_len_x) - dist = -scr_len_x; - if (dist > scr_len_x) - dist = scr_len_x; + for ( int x = 0 ; x < width ; x++ ) { - if (x_in >= in->area.x1) { - x_in = (in->area.x1 - in->area.x0 - 1); - } else { - x_in = (x_in - in->area.x0); - if (x_in < 0) - x_in = 0; - } + int const disp = PC * x; - // value at the pixel - _check_index(in, in_line + NR_PIXBLOCK_BPP(in) * x_in + byte, __LINE__); - unsigned char in_byte = NR_PIXBLOCK_PX(in)[in_line + NR_PIXBLOCK_BPP(in) * x_in + byte]; + // update history + for(int i=scr_len_x; i>0; i--) copy_n(history[i-1], PC, history[i]); + copy_n(NR_PIXBLOCK_PX(in) + in_line + disp, PC, history[0]); - // is it the same as last one we saw? - if(in_byte != last_in) different_count++; - last_in = in_byte; + // for all bytes of the pixel + for ( int byte = 0 ; byte < PC ; byte++) { - // sum pixels weighted by the kernel; multiply by stepx because we're skipping stepx pixels - sum += stepx * in_byte * kernel[scr_len_x + dist]; - } + if(skipbuf[byte] > x) continue; - // store the result in bufx - _check_index(bufx, bufx_line + NR_PIXBLOCK_BPP(bufx) * (x - xd0) + byte, __LINE__); - NR_PIXBLOCK_PX(bufx)[bufx_line + NR_PIXBLOCK_BPP(bufx) * (x - xd0) + byte] = (unsigned char)sum; + double sum = 0; + int last_in = -1; + int different_count = 0; - // optimization: if there was no variation within this point's neighborhood, - // skip ahead while we keep seeing the same last_in byte: - // blurring flat color would not change it anyway - if (different_count <= 1) { - int pos = x + 1; - while(((pos << stepx_l2) + scr_len_x) < in->area.x1 && - NR_PIXBLOCK_PX(in)[in_line + NR_PIXBLOCK_BPP(in) * ((pos << stepx_l2) + scr_len_x - in->area.x0) + byte] == last_in) - { - _check_index(in, in_line + NR_PIXBLOCK_BPP(in) * ((pos << stepx_l2) + scr_len_x - in->area.x0) + byte, __LINE__); - _check_index(bufx, bufx_line + NR_PIXBLOCK_BPP(bufx) * (pos - xd0) + byte, __LINE__); - NR_PIXBLOCK_PX(bufx)[bufx_line + NR_PIXBLOCK_BPP(bufx) * (pos - xd0) + byte] = last_in; - pos++; + // go over our point's neighbours in the history + for ( int i = 0 ; i <= scr_len_x ; i++ ) { + // value at the pixel + unsigned char in_byte = history[i][byte]; + + // is it the same as last one we saw? + if(in_byte != last_in) different_count++; + last_in = in_byte; + + // sum pixels weighted by the kernel + sum += in_byte * kernel[i]; } - skipbuf[byte] = pos; - } - } - } - } + // go over our point's neighborhood on x axis in the in buffer + for ( int i = 1 ; i <= scr_len_x ; i++ ) { - /* 2. Blur in direction of Y-axis, from bufx to bufy (they have the same resolution) */ - _make_kernel(kernel, _deviation_y, trans.expansionY()); + // the pixel we're looking at + int x_in = x + i; + if (x_in >= width) { + x_in = width - 1; + } else if (x_in < 0) { + x_in = 0; + } - for ( int x = bufy->area.x0 ; x < bufy->area.x1; x++ ) { + // value at the pixel + _check_index(in, in_line + PC * x_in + byte, __LINE__); + unsigned char in_byte = NR_PIXBLOCK_PX(in)[in_line + PC * x_in + byte]; - int bufy_disp = NR_PIXBLOCK_BPP(bufy) * (x - xd0); - int bufx_disp = NR_PIXBLOCK_BPP(bufx) * (x - xd0); + // is it the same as last one we saw? + if(in_byte != last_in) different_count++; + last_in = in_byte; - int skipbuf[4] = {INT_MIN, INT_MIN, INT_MIN, INT_MIN}; + // sum pixels weighted by the kernel + sum += in_byte * kernel[i]; + } - for ( int y = bufy->area.y0; y < bufy->area.y1; y++ ) { + // store the result in bufx + _check_index(out, bufx_line + disp + byte, __LINE__); + NR_PIXBLOCK_PX(out)[bufx_line + disp + byte] = (unsigned char)sum; - int bufy_line = (y - yd0) * bufy->rs; + // optimization: if there was no variation within this point's neighborhood, + // skip ahead while we keep seeing the same last_in byte: + // blurring flat color would not change it anyway + if (different_count <= 1) { + int pos = x + 1; + while(pos + scr_len_x < width && + NR_PIXBLOCK_PX(in)[in_line + PC * (pos + scr_len_x) + byte] == last_in) + { + _check_index(in, in_line + PC * (pos + scr_len_x) + byte, __LINE__); + _check_index(out, bufx_line + PC * pos + byte, __LINE__); + NR_PIXBLOCK_PX(out)[bufx_line + PC * pos + byte] = last_in; + pos++; + } + skipbuf[byte] = pos; + } + } + } + } - for ( int byte = 0 ; byte < NR_PIXBLOCK_BPP(bufx) ; byte++) { - if (skipbuf[byte] > y) continue; + /* 2. Blur in direction of Y-axis, from bufx to bufy (they have the same resolution) */ + _make_kernel(kernel, _deviation_y, trans.expansionY()); - double sum = 0; - int last_in = -1; - int different_count = 0; + for ( int x = 0 ; x < width; x++ ) { - for ( int i = -scr_len_y ; i <= scr_len_y ; i += stepy ) { + int const disp = PC * x; - int y_in = ((((y << stepy_l2) + i + stepy2) >> stepy_l2) - yd0); + int skipbuf[4] = {INT_MIN, INT_MIN, INT_MIN, INT_MIN}; - int dist = ((y_in + yd0) << stepy_l2) - (y << stepy_l2); - if (dist < -scr_len_y) - dist = -scr_len_y; - if (dist > scr_len_y) - dist = scr_len_y; + PT imin[PC]; copy_n(NR_PIXBLOCK_PX(out) + disp, PC, imin); + for(int i=0; i<scr_len_y; i++) copy_n(imin, PC, history[i]); - if (y_in >= (yd1 - yd0)) y_in = (yd1 - yd0) - 1; - if (y_in < 0) y_in = 0; + for ( int y = 0; y < height; y++ ) { - _check_index(bufx, y_in * bufx->rs + NR_PIXBLOCK_BPP(bufx) * (x - xd0) + byte, __LINE__); - unsigned char in_byte = NR_PIXBLOCK_PX(bufx)[y_in * bufx->rs + NR_PIXBLOCK_BPP(bufx) * (x - xd0) + byte]; - if(in_byte != last_in) different_count++; - last_in = in_byte; - sum += stepy * in_byte * kernel[scr_len_y + dist]; - } + int bufy_line = y * out->rs; - _check_index(bufy, bufy_line + bufy_disp + byte, __LINE__); - NR_PIXBLOCK_PX(bufy)[bufy_line + bufy_disp + byte] = (unsigned char)sum; + for(int i=scr_len_y; i>0; i--) copy_n(history[i-1], PC, history[i]); + copy_n(NR_PIXBLOCK_PX(out) + bufy_line + disp, PC, history[0]); - if (different_count <= 1) { - int pos = y + 1; - while((pos + (scr_len_y >> stepy_l2) + 1) < yd1 && - NR_PIXBLOCK_PX(bufx)[(pos + (scr_len_y >> stepy_l2) + 1 - yd0) * bufx->rs + bufx_disp + byte] == last_in) - { - _check_index(bufx, (pos + (scr_len_y >> stepy_l2) + 1 - yd0) * bufx->rs + bufx_disp + byte, __LINE__); - _check_index(bufy, (pos - yd0) * bufy->rs + bufy_disp + byte, __LINE__); - NR_PIXBLOCK_PX(bufy)[(pos - yd0) * bufy->rs + bufy_disp + byte] = last_in; - pos++; - } - skipbuf[byte] = pos; - } + for ( int byte = 0 ; byte < PC ; byte++) { - } - } - } + if (skipbuf[byte] > y) continue; - // we don't need bufx anymore - nr_pixblock_release(bufx); - delete bufx; + double sum = 0; + int last_in = -1; + int different_count = 0; - // interpolation will need to divide by stepx * stepy - int divisor = stepx_l2 + stepy_l2; + for ( int i = 0 ; i <= scr_len_y ; i++ ) { + // value at the pixel + unsigned char in_byte = history[i][byte]; - // new buffer for the final output, same resolution as the in buffer - NRPixBlock *out = new NRPixBlock; - nr_pixblock_setup_fast(out, in->mode, in->area.x0, in->area.y0, - in->area.x1, in->area.y1, true); - if (out->data.px == NULL) { - // alas, we've accomplished a lot, but ran out of memory - so abort - return 0; - } + // is it the same as last one we saw? + if(in_byte != last_in) different_count++; + last_in = in_byte; - for ( int y = yd0 ; y < yd1 - 1; y++ ) { - for ( int x = xd0 ; x < xd1 - 1; x++ ) { - for ( int byte = 0 ; byte < NR_PIXBLOCK_BPP(bufy) ; byte++) { + // sum pixels weighted by the kernel + sum += in_byte * kernel[i]; + } - // get 4 values at the corners of the pixel from bufy - _check_index(bufy, ((y - yd0) * bufy->rs) + NR_PIXBLOCK_BPP(bufy) + (x - xd0) + byte, __LINE__); - unsigned char a00 = NR_PIXBLOCK_PX(bufy)[((y - yd0) * bufy->rs) + NR_PIXBLOCK_BPP(bufy) * (x - xd0) + byte]; - if (stepx == 1 && stepy == 1) { // if there was no subsampling, just use a00 - _check_index(out, ((y - yd0) * out->rs) + NR_PIXBLOCK_BPP(out) * (x - xd0) + byte, __LINE__); - NR_PIXBLOCK_PX(out)[((y - yd0) * out->rs) + NR_PIXBLOCK_BPP(out) * (x - xd0) + byte] = a00; - continue; - } - _check_index(bufy, ((y - yd0) * bufy->rs) + NR_PIXBLOCK_BPP(bufy) * (x + 1 - xd0) + byte, __LINE__); - unsigned char a10 = NR_PIXBLOCK_PX(bufy)[((y - yd0) * bufy->rs) + NR_PIXBLOCK_BPP(bufy) * (x + 1 - xd0) + byte]; - _check_index(bufy, ((y + 1 - yd0) * bufy->rs) + NR_PIXBLOCK_BPP(bufy) * (x - xd0) + byte, __LINE__); - unsigned char a01 = NR_PIXBLOCK_PX(bufy)[((y + 1 - yd0) * bufy->rs) + NR_PIXBLOCK_BPP(bufy) * (x - xd0) + byte]; - _check_index(bufy, ((y + 1 - yd0) * bufy->rs) + NR_PIXBLOCK_BPP(bufy) * (x + 1 - xd0) + byte, __LINE__); - unsigned char a11 = NR_PIXBLOCK_PX(bufy)[((y + 1 - yd0) * bufy->rs) + NR_PIXBLOCK_BPP(bufy) * (x + 1 - xd0) + byte]; + for ( int i = 1 ; i <= scr_len_y ; i++ ) { - // iterate over the rectangle to be interpolated - for ( int yi = 0 ; yi < stepy; yi++ ) { - int iy = stepy - yi; - int y_out = (y << stepy_l2) + yi; - if ((y_out < out->area.y0) || (y_out >= out->area.y1)) - continue; - int out_line = (y_out - out->area.y0) * out->rs; + int y_in = y + i; + if (y_in >= height) { + y_in = height - 1; + } else if (y_in < 0) { + y_in = 0; + } - for ( int xi = 0 ; xi < stepx; xi++ ) { - int ix = stepx - xi; - int x_out = (x << stepx_l2) + xi; - if ((x_out < out->area.x0) || (x_out >= out->area.x1)) - continue; + _check_index(out, y_in * out->rs + disp + byte, __LINE__); + unsigned char in_byte = NR_PIXBLOCK_PX(out)[y_in * out->rs + disp + byte]; + if(in_byte != last_in) different_count++; + last_in = in_byte; + sum += in_byte * kernel[i]; + } - // simple linear interpolation - int a = (a00*ix*iy + a10*xi*iy + a01*ix*yi + a11*xi*yi) >> divisor; + _check_index(out, bufy_line + disp + byte, __LINE__); + NR_PIXBLOCK_PX(out)[bufy_line + disp + byte] = (unsigned char)sum; - _check_index(out, out_line + NR_PIXBLOCK_BPP(out) * (x_out - out->area.x0) + byte, __LINE__); - NR_PIXBLOCK_PX(out)[out_line + NR_PIXBLOCK_BPP(out) * (x_out - out->area.x0) + byte] = (unsigned char) a; + if (different_count == 0) { + int pos = y + 1; + while((pos + scr_len_y) < height && + NR_PIXBLOCK_PX(out)[(pos + scr_len_y) * out->rs + disp + byte] == last_in) + { + _check_index(out, (pos + scr_len_y) * out->rs + disp + byte, __LINE__); + _check_index(out, pos * out->rs + disp + byte, __LINE__); + NR_PIXBLOCK_PX(out)[pos * out->rs + disp + byte] = last_in; + pos++; + } + skipbuf[byte] = pos; } + } } } + + out->empty = FALSE; + slot.set(_output, out); } - nr_pixblock_release(bufy); - delete bufy; - - out->empty = FALSE; - slot.set(_output, out); - return 0; } @@ -551,7 +613,7 @@ { int area_x = _effect_area_scr_x(trans); int area_y = _effect_area_scr_y(trans); - return _max(area_x, area_y); + return std::max(area_x, area_y); } void FilterGaussian::set_deviation(double deviation) Index: src/display/nr-filter-gaussian.h =================================================================== --- src/display/nr-filter-gaussian.h (revision 13436) +++ src/display/nr-filter-gaussian.h (working copy) @@ -7,6 +7,7 @@ * Authors: * Niko Kiirala <niko@...1267...> * bulia byak + * Jasper van de Gronde <th.v.d.gronde@...528...> * * Copyright (C) 2006 authors * @@ -62,17 +63,6 @@ void _make_kernel(double *kernel, double deviation, double expansion); int _effect_area_scr_x(Matrix const &trans); int _effect_area_scr_y(Matrix const &trans); - int _effect_subsample_step(int scr_len_x, int quality); - int _effect_subsample_step_log2(int scr_len_x, int quality); - - inline int _min(int const a, int const b) - { - return ((a < b) ? a : b); - } - inline int _max(int const a, int const b) - { - return ((a > b) ? a : b); - } };

4 5

Trace dialog tweaks
by Bob Jamison 10 Dec '06

10 Dec '06

Hi all, I really like the redesign of the Trace dialog, and I loved it when I first saw it. But later, I see two things that need to be adjusted before the release. 1. The SIOX button needs to be on the same view as the preview, since it alters how the selection is made. Normally, we want only an image and nothing else. With the SIOX checkbox pressed, we want the image, and also any curves which are above it in Z-order. 2. Much more important: The "Credits" frame is missing. We need to put it back. I (we) promised Peter Selinger that as long as we used Potrace, he would have obvious attribution for his stuff. He is a treasured benefactor of Inkscape, and we need to make sure that users know whence the technology comes. I am an active opponent of software patents, but if anyone really deserved a patent, it would be Mr. Selinger. Potrace is cutting technology, yet instead of trying to profit from it, he altruistically allows people like us to use it. Behaviour such as this needs to be encouraged. For example, the difference between Potrace 1.6 and 1.7 is a set of optimizations that he did explicitly for us. Cool guy! And all we need is a (3cm x 2cm) box with the name and URL on it. bob

2 3

Gaussian blur fix
by Jasper van de Gronde 10 Dec '06

10 Dec '06

I found bug 1576258 in the tracker and made a patch for Gaussian blur that fixes it (attached it to the bug). Since no one was assigned to the bug I thought I'd send a message to the mailing list so someone can review/commit the fix. BTW, the IIR gaussian blur patch I posted earlier also solves this problem, as it doesn't use subsampling anymore, but this patch is much less invasive.

1 0

Re: [Inkscape-devel] [Inkscape-user] bbox calculation
by bulia byak 09 Dec '06

09 Dec '06

On 12/9/06, Jasper van de Gronde <th.v.d.gronde@...528...> wrote: > "The bounding box is computed *exclusive* of any values for clipping, > masking, *filter effects*, opacity and *stroke-width*." > > See: > http://www.w3.org/TR/SVG11/coords.html#ObjectBoundingBox > > I filed this as bug 1612108 (with a test case which shows the problem). Thanks, that's a good point - it concerns SVG compliance and therefore must be fixed regardless of what we decide for other visual and UI aspects of bboxes. Unfortunately this means that at the moment, we display gradients, patterns, clippaths and masks slightly wrong when they have objectBoundingBox units and apply to an object with stroke, and their display will change when we fix this. But the good news is that Inkscape does not create objectBoundingBox itself (except filter areas I think), so such files can only come from elsewhere. If a gradient has objectBoundingBox units, it is converted to absolute units as soon as you edit the gradient or the object that uses it. So, this fix is likely to have a relatively low impact. -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org

1 0

Re: [Inkscape-devel] Time to unpause 0.45 release?
by Bryce Harrington 09 Dec '06

09 Dec '06

On Wed, Dec 06, 2006 at 01:25:35PM -0800, Jon Phillips wrote: > On Wed, 2006-12-06 at 12:57 -0800, Bryce Harrington wrote: > > Hi all, > > > > A few weeks back we decided to put the release on pause to give time for > > additional work on the PDF extension. Could someone outline the status > > of this work, and if it is still necessary for this to be blocking the > > release? > > > > If not, would anyone have an issue if we resumed the release process at > > this point? I find myself with some unexpected extra freetime this > > month that I could devote to assisting with the release. > > > > Bryce > > Funny...I had the near same email ready to send...lets haul on the > release. Activity seems to have lowered...I think now rather than wait > any more... Okay, well one of the really big items is getting the about screen contest underway. What steps are necessary to get this going? Any chance we can get this ready to start accepting submissions by this weekend? Bryce

4 5

Re: [Inkscape-devel] [Inkscape-user] bbox calculation
by bulia byak 09 Dec '06

09 Dec '06

On 12/8/06, MenTaLguY <mental@...3...> wrote: > I think some things (e.g. selection outlines) should probably always use the visual bbox. But the line between "technical" and "artistic" can be very fine. Even if we ignore technical users, there are artistic users (including myself) who sometimes require geometric bounds -- tiling is one of the most common cases, but there are others as well. > > We need to have a better solution in those situations, because there, the lack of geometric bounds isn't just annoying, it's debilitating. I just wish I knew what that solution was. :/ I can change it back, but I don't want to get back all the problems we had with no-stroke bboxes, and I don't really want to introduce a user option which will be hard to explain to the user and a maintenance burden. On the other hand, we now have an even worse option in Options > Tools > Selector > Default scale origin, which is highly obscure and rather buggy. It seems to me that if we add a "bounding box includes stroke" option we'll be able to get rid of that "default scale origin" which is a good thing in itself. It would be still better to find a compromise which would work for everyone and therefore not require an option. Suggestions are welcome. Please also consider that we now have blur, and in at least some cases, it makes perfect sense to include the blur margin in the bbox too. -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org

3 3

wiimote+inkscape (YouTube)
by MenTaLguY 07 Dec '06

07 Dec '06

Inkscape featured (briefly) as a demo application for this guy's project to develop Linux drivers for the Wiimote. http://www.youtube.com/watch?v=Vp1_pZ-AteA&eurl= -mental

4 5

Runtime checks for SSL
by Aaron Spike 06 Dec '06

06 Dec '06

One of the problems I've been running up against with the autopackage is ensuring that the users have SSL installed. SSL is required for securing jabber login and whiteboard traffic. The autopackages I am currently generating have SSL linked to inkscape statically. This is a huge security nightmare IMHO and I do not plan to do this for the release packages because I do not plan on undertaking the responsibility of ensuring that we update the packages for any and every SSL vulnerability. I would like to user relaytool to make a runtime check for the presence of libssl and conditionally disable features. I would appreciate assistance with this. http://autopackage.org/apbuild-relaytool.php Aaron Spike

1 0

Boolean operations on lines, bug or feature?
by Jasper van de Gronde 04 Dec '06

04 Dec '06

When I use the difference or intersection operation on an open path (and a rectangle) the path suddenly gets new edges and is closed, see attachment (which also shows my intention). Is this intentional or should I file a bug?

2 2

Kompiling Inkscape
by Loi 03 Dec '06

03 Dec '06

Hi, Today I made a svn checkout of inkscape and tried to compile it. But it doesn't want: ./autogen.sh ============================================================================= When you report a trouble about building SVN version of inkscape, Please report following information about distro and tools version, too. --1. distribution------------------------------------------------------------ Debian GNU/Linux release 4.0 --2. tools------------------------------------------------------------------- /usr/bin/m4: /usr/bin/autoconf: autoconf (GNU Autoconf) 2.60a /usr/bin/autoheader: autoheader (GNU Autoconf) 2.60a /usr/bin/automake: automake (GNU automake) 1.10 automake-1.7: not found automake-1.8: not found automake-1.9: not found /usr/bin/aclocal: aclocal (GNU automake) 1.10 aclocal-1.7: not found aclocal-1.8: not found aclocal-1.9: not found /usr/bin/intltoolize: intltoolize (GNU intltool) 0.35.0 /usr/bin/gettextize: /usr/bin/gettextize (GNU gettext-tools) 0.15 --3. environment variables--------------------------------------------------- PATH=/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games LANG=de_CH LANGUAGE=de_CH:de_DE:de:en_GB:en ============================================================================= I am testing that you have the required versions of autoconf, automake, glib-gettextize and intltoolize. This test is not foolproof and if anything goes wrong, there may be guidance in the file HACKING.txt checking for autoconf >= 2.52 ... yes (version 2.60) checking for automake >= 1.7 ... yes (version 1.10) checking for glib-gettextize >= 2.0.0 ... yes (version 2.12.4) checking for intltool >= 0.17 ... yes (version 0.35.0) Running aclocal ... configure.ac:44: error: AC_PROG_CC cannot be called after AM_PROG_CC_C_O /usr/share/aclocal-1.10/ccstdc.m4:25: AM_PROG_CC_STDC is expanded from... configure.ac:44: the top level autom4te: /usr/bin/m4 failed with exit status: 1 aclocal: autom4te failed with exit status: 1 Please fix the error conditions and try again. I use: autoconf (GNU Autoconf) 2.60a automake (GNU automake) 1.10 All builddeps given in debian/control are installed.

2 1

Buildtool : 'console' option
by Johan Engelen 01 Dec '06

01 Dec '06

Thanks alot for making the buildtool! It's pretty nice. However, now I manually changed build.xml:255 into "-lgc -mconsole -lws2_32 -lintl -lm -lgdi32 -lcomdlg32" to create a console version so I can see errors and other messages. Could build.xml be changed such that adding 'console' as commandline option would build a console version of Inkscape? ("buildtool dist console" for example). Or do I have to make a copy-paste of targets link and dist and rename them linkconsole and distconsole such that "buildtool distconsole" would do what I want? Thanks, Johan

1 0

Re: [Inkscape-devel] Problem with the Latex Formula module
by Stéphane Gimenez 30 Nov '06

30 Nov '06

Sorry, my first message was meant to be addresed to the list. > >Could you try with the latest svn version of the extension script and > >give us feedback? > > > >http://inkscape.svn.sourceforge.net/viewvc/inkscape/inkscape/trunk/share/ex… > > > It is better, I have now a window message :) : > > dvips: ! DVI file can't be opened. […] Yes, it's better! Now I guess you got this message because the formula input you gave to the extension was either not valid LateX, or it became invalid because of a shell expansion which occured when the script was called by the extensions manager (this is a bug). Can you try with a simple "$ \cos(x) $" LaTeX input? To know how your imput will be expanded you can use the following shell command: $ echo -E "$$\cos(x)$$" 8012\cos(x)8012 For example '$$' is expanded to the pid of the processus. As a workarround, try not to use '$' or '$$' but '\(' and '\[' instead to enter math mode. Stéphane. PS: I'll also try to improve error reports when the given input is not valid LaTeX.

3 6

Secondary toolbar size?
by Andreas Nilsson 30 Nov '06

30 Nov '06

Dear Inkscape developers. Myself and some other folks are currently working on some icons for Inkscape [1], but have ran into some issues. Apparently my build (13378 ...the latest one I got to work) wants to use 16x16 images for the icons in both the topmost (although the ones it gets from the desktop theme is 24x24) and the secondary toolbar. The tools toolbar however still use 24x24 images (and that is the correct behavior I suspect). However, other peoples toolbars use the 24x24 size (and so did mine until recently), this leads to the problem that I don't know what size to aim at. If I use 24x24 images for the toolbar, they get blurry on my system, and if I use 16x16 it gets blurry on others. What is the correct size used by these toolbars, and is there some way I can have icons in several sizes? The several sizes issue is even more troublesome, as the icons from the tools toolbar gets all blurry in the undo history dialog among other places [2]. 1.http://ramnet.se/~nisse/diverse/temp/inkscape-icons.tar.gz 2. http://ramnet.se/~nisse/diverse/temp/inkscape-iconsizes.png - Andreas

4 10

New C++ find dialog
by Johan Engelen 29 Nov '06

29 Nov '06

Hello all, (this is about the current SVN-trunk version) I've been busy implementing the find dialog as a c++ dialog (ui\dialog\find.cpp). I hope it inspires others to spend some off-time on implementing the other old (non gtkmm) dialogs! It's pretty lame work though. Maybe good work for new people to get started? But very very unexciting I guess. But refactoring is a noble cause! (Mail me if you need help) If you have time to test the find dialog for bugs, please go to src/verbs.cpp:1618 and remove the comment //. I know the UI is not what it should be. When I tried adding the HSeparator as in the old find dialog, Inkscape would crash so I gave up on the issue at the moment. Thanks, Johan

1 0

markers in arena shapes?
by Bryce Harrington 28 Nov '06

28 Nov '06

Mental or Bulia, I've got a question... In looking at where marker stuff is hooked in I notice a lot of stuff in nr-arena-shape.cpp, which appears to be special casing marker elements as shape children. I'm attempting to add some documentation, but it's a little confusing to me. Could either of you explain what the design intent is for this? In particular, I'm wondering why markers have this special case; it feels like an odd fit in nr-arena-shape since everything else is so generalized, and I'm wondering if there could be a way to generalize the markers so no special case is needed for them? Bryce

4 7

g2png
by bulia byak 28 Nov '06

28 Nov '06

Hi Cedric, you have committed the "g2png" extension. It has many problems. 1. It wasn't added to Makefile.am and so ignored during installation. 2. We don't use capital letters in filenames so G2Pngs.py had to be renamed to g2pngs.py. 3. The python file had some French Unicode symbols on which my Python interpreter choked. Please translate the comments to English. 4. It was added to a "Recursive actions" submenu which makes little sense from the user viewpoint. I changed that to "Export". 5. It has a wrong copyright statement. You are not Aaron Spike, are you? :) 6. The URI should also be changed - don't use org.ekips, use org.inkscape or your own domain. 7. Most importantly, this extension just goes and exports ALL groups in the document, recursively. This does not seem to make sense to me. In most documents, it results in an awful lot of pngs, most of which are not needed. To be useful, instead, it should just export _all selected objects_ (not just groups!) without any recursion. Correspondingly, rename it to "Export selected objects" or something like that. 8. It ignores the filename and resolution hints stored for objects, always exporting them at the default resolution with the filename from the id. This is not acceptable. See the man page for how to use export hints. I have fixed problems 1 to 4 in SVN, but the rest are for you to fix. I'd suggest that you should have submitted this as a patch to our patch tracker, or at least have it discussed on the list, before committing to SVN. -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org

3 2

PDF Output Atlas
by Aaron Spike 26 Nov '06

26 Nov '06

I think it is generally agreed that PDF output is the last outstanding blocker on the release process. Anyone who can spare a few cycles to help perfect PDF output will be much appreciated. It would be nice if the wise could supply some commentary on the state of PDF output to taper off the learning curve for newcomers to the field (like myself). As I sit here staring blankly at the files in src/extension/internal, I could really use an atlas that explains which files are important to pdf output, which particular effort they are part of, how they relate to each other, and where my effort should be focused. http://inkscape.svn.sourceforge.net/viewvc/inkscape/inkscape/trunk/src/exte… Thanks, Aaron Spike

1 0

Re: [Inkscape-devel] NEW: RadioButtons for extensions (.INX)
by Johan Engelen 26 Nov '06

26 Nov '06

> Date: Sat, 25 Nov 2006 15:41:16 +0000 (GMT) > From: Alan Horkan <horkana@...44...> > > > Date: Fri, 24 Nov 2006 22:23:31 +0100 > > From: Johan Engelen <goejendaagh@...1571...> > > To: inkscape-devel(a)lists.sourceforge.net > > Subject: [Inkscape-devel] NEW: RadioButtons for extensions (.INX) > > > > I've added radiobuttons to the parameter types for > extensions :) They are > > called: 'optiongroup'; English is not my native tongue > which makes it often > > difficult to come up with a label..., please rename if desired. > > A developer example is available as a placeholder until a > real extension > > uses it. > > Have you seperated the option group concept from the > imlementation as a radio list? I've thought about that (since the last discussion about enums), and it is the reason that the syntax is exactly equal to enums. I think it is safe to answer 'Yes'. (I will rename <item> to <option>) > For example you might want to take the same options and > reformat them as > drop down list rather than a radio list depending on how much > space you > have available or how important that option really is. Yes that is possible (for example: if the number of choices is more than 3, display dropdown, otherwise radiobuttons. However I must say that at this moment I prefer to give full control to the extension developer.

2 1

Closing bugs/requests/etc
by Johan Engelen 26 Nov '06

26 Nov '06

I think I am not able to close bugreports and the like? Or if so, please tell me how to! Thanks, Johan

2 1

Inkscape / win32 with gtk2.10
by Bob Jamison 25 Nov '06

25 Nov '06

Hi, all. Starting with Bulia's need for me to make an Inkscape build with Tor's patch for transient dialogs on win32, there was a need for me to change the build to use gtk2.10. Since I was going to change the build, I thought it would be good to modernize it, thus the Buildtool. Whew. Well, I got the Buildtool working yesterday, and I just now got a gtk2.10 build working. Tor's patch tomorrow? This copy was made with gtk2.10: http://inkscape.modevia.com/win32/Inkscape0611161701.7z This is not just a dll drop-in replacement, but a complete build with new libraries. It seems to work ok here, but people might want to give it a try to see if it works for them. bob

5 10

Re: [Inkscape-devel] Compile error with FreeType >= 2.2.0 (caused by ps export t
by bulia byak 25 Nov '06

25 Nov '06

On 11/25/06, Cyril Dangerville <cyrildangerville@...19...> wrote: > Hi! > I uploaded a new version that does not rely on freetype internal headers. I > patched my svn copy (revision 13361) and compiled successfully with Freetype > 2.2.1. But I need some help on one issue. Please read my last comment on the > tracker for details: > http://sourceforge.net/tracker/index.php?func=detail&aid=1219308&group_id=9… I am far from an expert on Freetype, but from the name of the function, it does indeed seem that it's X11-only. If so, I have no idea how to get font type in a portable way. Can you perhaps get the font file name and figure out from its extension? Just an idea. Any help from anyone familiar with this will be much appreciated! -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org

1 0

NEW: grow/shrink selection in node tool
by bulia byak 25 Nov '06

25 Nov '06

* You can grow or shrink node selection by hovering the mouse pointer over a node and using mousewheel (up = grow, down = shrink) or the keys PageUp (grow) and PageDown (shrink). Growing adds the closest unselected node to the selection; shrinking deselects the farthest selected node. There are two modes that differ by how the closest/farthest nodes are chosen: o Spatial selection (Mousewheel, PageUp/PageDown): distances to nodes are measured directly, regardless of which subpath a node belongs to. o Linear selection (Ctrl+Mousewheel, Ctrl+PageUp/Ctrl+PageDown): node distances are measured along the path, and only the nodes belonging to the same subpath as the hovered node are considered (i.e. other subpaths are never selected). This technique is convenient for quickly selecting an area in a complex path starting from a center - for example, for node sculpting. Let me know if you think linear mode will be more often used than spatial - I can swap the shortcuts so that the more common mode can be used without Ctrl. -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org

2 1

stupid question
by tj 25 Nov '06

25 Nov '06

I am a new user to inkscape and I have a stupid question. How do you close windows like the document and inkscape preferences windows? I see no close, cancel, etc buttons? tj

5 5

NEW: RadioButtons for extensions (.INX)
by Johan Engelen 25 Nov '06

25 Nov '06

I've added radiobuttons to the parameter types for extensions :) They are called: 'optiongroup'; English is not my native tongue which makes it often difficult to come up with a label..., please rename if desired. A developer example is available as a placeholder until a real extension uses it. Regards, Johan

2 1

Re: [Inkscape-devel] Two function plotters?
by bulia byak 24 Nov '06

24 Nov '06

On 11/24/06, Johan Engelen <johane@...1482...> wrote: > The "function plotter" is meant to be a more general plotter than "wavy". > "wavy" let's you specify the x-range in multiples of pi, which is very > convenient for plotting periodic functions. "function plotter" does not let > you do this which can be annoying. I'd like to keep them separate, but we > can also merge them by adding for example a checkbox to "function plotter" > to multiply the x-range by 2pi. Yes, I think such a checkbox would be a good idea. Can you please do it, and then we can retire the Wavy. -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org

2 3

Re: [Inkscape-devel] Two function plotters?
by Johan Engelen 24 Nov '06

24 Nov '06

> Date: Thu, 23 Nov 2006 17:46:32 -0400 > From: "bulia byak" <buliabyak@...400...> > > I notice that we have two extensions to do function plotting: > old "wavy" and new "function plotter". Johan, since you added the > latter, please clean this up by removing one of them (make sure no > functionality is lost!). (Since I graduated two days ago, I'm back working on Inkscape again!) The "function plotter" is meant to be a more general plotter than "wavy". "wavy" let's you specify the x-range in multiples of pi, which is very convenient for plotting periodic functions. "function plotter" does not let you do this which can be annoying. I'd like to keep them separate, but we can also merge them by adding for example a checkbox to "function plotter" to multiply the x-range by 2pi. Another option is to use the read-out possibility of the notebook parameter: "wavy" could be added as a tab and the extension can determine which tab was selected when processing... (definately not clear to users and this has not my preference)

1 0

Re: [Inkscape-devel] g2png
by bulia byak 24 Nov '06

24 Nov '06

On 11/24/06, cedric GEMY <radar.map35@...8...> wrote: > my purpose was exactly to export groups, only. See the release Notes if > you want o know why. I don't see how your code fits that explanation, in particular the icons example. There may be much more groups in an icons file (examine our own icons.svg for example), not only the top-level groups corresponding to icons. Icons may contain some inner groups, which will get exported too. On the other hand, some simple icons may be represented by a single shape, not a group. And finally, I may want to export not ALL icons in the file but only some of them (more than one but not all). Your code can't do this either. > i don't understand what your proposal have > different from the export to bitmap dialog (option "selection" checked) It is different in that it exports each selected object SEPARATELY, creating as many PNG files as you have objects selected. -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org

1 0

Compile error with FreeType >= 2.2.0 (caused by ps export type 1 patch)
by Gustav Broberg 23 Nov '06

23 Nov '06

I'm having problems compiling since revision 13379 which applied the (rather old) patch 1219308 [1] for embedding Type 1 fonts into exported PostScript files. The reason for the problems is that the patch relies on internal FreeType headers which are no longer exposed as of version 2.2.0, see [2] for details. Unless the patch can be rewritten any time soon, I think it needs to be rolled back -- FreeType 2.2.* is pretty common, Ubuntu 6.10 uses 2.2.1 for instance. A bug is filed here... http://sourceforge.net/tracker/index.php?func=detail&aid=1600900&group_id=9… Thanks! 1.http://sourceforge.net/tracker/index.php?func=detail&aid=1219308&group_id… 2.http://freetype.sourceforge.net/freetype2/freetype-2.2.0.html -- Gustav Broberg

2 1

win32 build tool
by Adib Taraben 23 Nov '06

23 Nov '06

Hello Bob Jamison, I think your build tool is much faster than make ... there is a problem with the l10n: Build should create for all po/*.mo files a directory in inkscape/local/ with the name of the file (without extension) and copy the file to that location. Is that possible ? Thx, Adib.

2 1

Two function plotters?
by bulia byak 23 Nov '06

23 Nov '06

I notice that we have two extensions to do function plotting: old "wavy" and new "function plotter". Johan, since you added the latter, please clean this up by removing one of them (make sure no functionality is lost!). -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org

1 0

Help Wanted: Testing Autopackages
by Aaron Spike 23 Nov '06

23 Nov '06

The quality of the Autopackage builds could be greatly increased with more consistent testing. There is a need for volunteers running various distros (Slackware, Suse, Mandrake, Fedora, Debian) and various versions of these distros to work with the autopackager to ensure compatibility throughout the release cycle. This work involves regular downloading and installing of inkscape autopackages (about 10MB), submitting detailed bug reports to the autopackager and testing fixes as they are prepared. Snapshot builds for testing live at: http://inkscape.modevia.com/ap/?C=M;O=D Thanks, Aaron Spike

2 3

Problem with the Latex Formula module
by Jean-Luc Menut 23 Nov '06

23 Nov '06

Hello, I have a problem when I try to use the latex formula module: nothing appears, I have this message in my terminal : ** (.proxy.inkscape:7980): CRITICAL **: Last <defs> removed I'm using the latest inkscape autopackage (05 nov), pstoedit 3.44 and ubuntu (edgy) Any idea ? thanks, Jean-Luc

2 4

[Fwd: [Scale-announce] SCALE Call For Papers closes Monday!]
by Ted Gould 23 Nov '06

23 Nov '06

So, I think we're going to have a booth at SCALE this year. Josh has volunteered to take a leadership role in that -- so I'm going to play SCALE cheerleader. Which means, SUBMIT ABSTRACTS! :) It's February, and unlikely that the weather is better where you are than it is going to be in LA. Southwest flies to LAX so it means you can probably get a cheap flight. You can walk to the hotel from LAX[1]. The conference is on the weekend. I think it would be very cool to have a set of Inkscape presentations. Forward this to your GIMP/Blender/Scribus friends, perhaps we can get a Linux Graphics track :) SCALE is a cool conference, small and laid back. Still a volunteer run thing, so the registration fee isn't crazy. But, every year the speakers have gotten better, and the overall quality has gone up. I don't expect this year to be different. --Ted [1] - Not that I would recommend this. The traffic around LAX is awful, so unless you're invincible to cars, take the hotel shuttle. -------- Forwarded Message -------- From: scale-announce@...1566... Reply-To: nobody@...1566... To: SCALE-announce <scale-announce@...1566...> Subject: [Scale-announce] SCALE Call For Papers closes Monday! Date: Thu, 16 Nov 2006 14:18:31 -0800 If you're considering making a presentation at the 5th annual So Cal Linux Expo, be advised that the window to submit your CFP closes Monday, November 20th. Get your proposal in now! In the same vein, SCALE is sponsoring a one-day Open Source Health Care Summit on Friday, February 9th, just prior to the Expo. If you use Open Source software in the health care arena, here's your chance to talk about it. The CFP for the Summit closes December 29th. For more information, or for the details on the CFP, see http://socallinuxexpo.com/healthcare07/index.php. _______________________________________________ Scale-announce mailing list Scale-announce@...1566... http://mail.socallinuxexpo.com/mailman/listinfo/scale-announce

3 4

Test please ignore
by Ted Gould 22 Nov '06

22 Nov '06

I've been having trouble sending to Sourceforge. Hopefully this message will get through. --Ted

1 0

Re: [Inkscape-devel] Secondary toolbar size?
by Jon A. Cruz 22 Nov '06

22 Nov '06

On Nov 22, 2006, at 6:08 AM, David Christian Berg wrote: >> Mmmmmh, I can't find the Print Large theme you talking about. I have >> only have: David_icons.svg, icons.svg and legacy_icons.svg >> Where is "the size resquested" you are talking about? In the .svg >> file? > > Talking about the GTK Theme here, not the icon theme used by > Inkscape. I > didn't check but I guess you'll find the Large Print theme at > art.gnome.org Yes, the GTK+ theme. It's generally shipped with most RedHat derived distros at the least.

1 0

Fit selection to page
by Nika Vidal 20 Nov '06

20 Nov '06

Hi all, I've been reading yout list for some time but this is my first message to this list. I think it could be useful a "fit selection to page" button, specially when you get/made an artwork and you want to fit it into some specific format (a3, a4...), for example working for a printing work. I saw something like this to anybody was working with Macromedia Freehand. This is only an idea, I don know if it's already implemented at devel version. Excuse my poor English. Regards, Nika.

2 1

"All roads lead to bitmap" icon blog entry
by unknown＠example.com 20 Nov '06

20 Nov '06

Hi, I just came across a blog entry discussing vector vs. bitmap for icons. http://islayer.com/blog/?p=87 It also mentions a limitation with Illustrator, but that's a side one. Anyway, just wanted to point this out as something we might look at. I know I'll follow up on the icon aspects, as it falls in line with things I've discussed with various icon authors in addition to the librsvg team, ksvg peoples, etc.

3 2

NEW: Trace Bitmap dialog redesign and new parameters
by bulia byak 19 Nov '06

19 Nov '06

* This dialog now provides access to three more tracing parameters: o Suppress speckles: If set, spots or speckles larger than the given size are suppressed in the trace. o Smooth corners: This parameter controls how much smoothing is applied to corners in the traced path. o Optimize paths: If set, trace paths are optimized by joining adjacent Bezier segments with the given tolerance. * The dialog is redesigned to use three tabs: Mode, Parameters, and Preview. The controls are reorganized to be easier to find. Most labels and tooltips are rewritten for clarity. * The trace preview image is made twice larger. -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org

8 10

opacity and blur: 0.15 or 15%?
by bulia byak 19 Nov '06

19 Nov '06

Here's a usability question that I'd like to get some feedback on. Myself, I'm undecided. How to display and input values of opacity and blur? 1. As percent, 0 to 100, or 0.0 to 100.0. Pro: easier to pronounce; more common in "real life"; spinbutton can be shorter by one character (dot). Contra: requires a "%" label after the spinbutton; if the label is not there (as e.g. in the statusbar there's little room for it), it may be more difficult to guess, when you see e.g. "15", that the maximum is 100; requires a change from the Inkscape status quo. 2. As numbers from 0.0 to 1.0 (with two or three significant digits). Pro: no need for a % label; easier to guess what the maximum is (though still not entirely obvious, unless you have a slider too); no need to change the status quo. Contra: slightly more "geeky", more cumbersome to type and pronounce, requires slightly wider spinbutton. Opinions? -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org

5 6

NEW: file name entry field finally fixed
by bulia byak 18 Nov '06

18 Nov '06

* We removed the "hacked" filename entry field that we had added to the Open and Save dialogs because starting from version 2.10, GTK+ has finally restored this field in their standard file dialog (better late than never!). The standard field at the top of the dialog supports type-ahead find and performs the default dialog action (open or save) by pressing Enter, which means you can now do a quick Ctrl+O, Ctrl+V, Enter sequence to open the file whose path is in your clipboard (this closes a long-standing usability bug). Those who use older versions of GTK are advised either to upgrade to 2.10 or use Ctrl+L to open a pop-up filename box. (Our Windows builds are shipped with GTK+ 2.10.) -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org

1 0

Re: [Inkscape-devel] Extension Documentation
by Aaron Spike 17 Nov '06

17 Nov '06

Ted Gould wrote: > Yeah! Go Aaron! Well so far I haven't created much new text on the wiki, just moved it around. So let's give a round of applause to the folks that have added some docs recently. Thanks guys. > I actually have looked for that file on more than one occasion. Really, > if someone out there has a mailing list archive... I'd like to update > it with all the new fun things that have been added. Right under my nose the whole time! Sf.net's new interface makes it way easier for me to find things. http://sourceforge.net/mailarchive/message.php?msg_id=11420660 I pasted it to the wiki. This was from a time before extensions had parameters and the autogui. Wow, things have come a long way since 2005-04-07. Aaron Spike

1 0

[Fwd: [Inkscape-tracker] [ inkscape-Patches-1591723 ] patch to access potrace parameters within inkscape]
by Jon Phillips 17 Nov '06

17 Nov '06

Heya, all, this is why it is so good to keep our trackers nice and flowing...check the comments below...and I would like to say a big thanks to Alan and Bulia for spending so much time on cleaning up our trackers... Keeping the patches flowing is so helpful to bring in developers... Jon -------- Forwarded Message -------- > From: SourceForge.net <noreply@...34...> > To: noreply@...34... > Subject: [Inkscape-tracker] [ inkscape-Patches-1591723 ] patch to > access potrace parameters within inkscape > Date: Fri, 10 Nov 2006 15:40:07 -0800 > > Patches item #1591723, was opened at 2006-11-07 01:00 > Message generated for change (Comment added) made by sgimenez > You can respond by visiting: > https://sourceforge.net/tracker/?func=detail&atid=604308&aid=1591723&group_… > > Please note that this message will contain a full copy of the comment thread, > including the initial issue submission, for this request, > not just the latest update. > Category: Other > Group: None > Status: Open > Resolution: None > Priority: 8 > Private: No > Submitted By: Stéphane Gimenez (sgimenez) > Assigned to: Jon Phillips (kidproto) > Summary: patch to access potrace parameters within inkscape > > Initial Comment: > hi, > > I wanted to specify my own parameters when using > potrace within inkscape, so i did this patch. > > I guess it could be useful to everybody. > > note: this patch contains new translatable strings: > labels and tips. > > ---------------------------------------------------------------------- > > >Comment By: Stéphane Gimenez (sgimenez) > Date: 2006-11-11 00:40 > > Message: > Logged In: YES > user_id=727197 > > Ok, > * I've added authoring info. > * I put self-explained parameter titles, and parameters labels. > * and I killed unrelated cosmetic diff-hunks from the patch. > > Also, I plan to > * provide a rewritten rgb quantization algorithm, cause i > found the current one a bit slow and not enough accurate. > * apply the "turn to monochrome" pass before the > quantization pass in TRACE_QUANT_MONO mode, for improved > results. > * find a way not to apply the quantization pass twice (for > the preview and the result) when OK is pressed. > But after that, I'd like to help with cleaning up the dialog > and do the "advanced" thing :) > > And Thank you for such an enthusiastic feed-back ;) > > > ---------------------------------------------------------------------- > > Comment By: Jon Phillips (kidproto) > Date: 2006-11-09 19:59 > > Message: > Logged In: YES > user_id=914868 > > Cool, this patch looks awesome! A couple of things...could > you add your copyright and real name/email to each file that > you touched please. Also, please add your name to the > AUTHORS file and include this in your patch. > > Also, please add tooltips for the text labels for the 3 items. > > After you do this, I will commit the patch...cool! It works > great! > > Also, I would like to encourage you to submit more > patches...also, we would love to expose more features for > potrace and include other tracers...would you like to help > with this? > > We usually take 2 patches and then add a developer, you in > this case, to have full SVN access to our project... > > Cool? > > ---------------------------------------------------------------------- > > Comment By: Jon Phillips (kidproto) > Date: 2006-11-09 19:43 > > Message: > Logged In: YES > user_id=914868 > > Applied and am testing this one out...looks cool...we can > promote the advanced idea after the commit, but more > interested in getting it in... > > I like the variable names "TurdSize" hahahaha > > > > ---------------------------------------------------------------------- > > Comment By: Alan Horkan (horkana) > Date: 2006-11-08 16:10 > > Message: > Logged In: YES > user_id=402612 > > while it will be good to make these things possible adding > many more controls in the user interface complicates things > for ordinary users > > any chance the advanced options could be hidden behind a > disclosure triangle? > > (there are quite a few more things which could be done to > clean up the dialog but for the purposes of this patch I > dont want to overcomplicate matters) > > > ---------------------------------------------------------------------- > > You can respond by visiting: > https://sourceforge.net/tracker/?func=detail&atid=604308&aid=1591723&group_… > > ------------------------------------------------------------------------- > Using Tomcat but need to do more? Need to support web services, security? > Get stuff done quickly with pre-integrated technology to make your job easier > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > _______________________________________________ > Inkscape-tracker mailing list > Inkscape-tracker(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/inkscape-tracker -- Jon Phillips San Francisco, CA USA PH 510.499.0894 jon@...235... http://www.rejon.org MSN, AIM, Yahoo Chat: kidproto Jabber Chat: rejon@...896... IRC: rejon@...897...

8 20

Extension Documentation
by Aaron Spike 16 Nov '06

16 Nov '06

People have been noticing the sad state of Extension System documentation frequently. I think we should change this. I've started reorganizing things on the wiki. I've taken an old mail from Ted and pasted it at: http://wiki.inkscape.org/wiki/index.php/ExtensionArchitecture Never seen a clearer description! http://wiki.inkscape.org/wiki/index.php/ScriptingHOWTO describes in general terms what is needed to write a script/program in any language that communicates with inkscape as a Script extension. http://wiki.inkscape.org/wiki/index.php/MakingAnINX will be home to a description of the INX format. Ted or anybody else do you have the INX DTD that I had worked up way back when? I can't seem to find it. The last step will be to create a page describing the helper modules for extension writers who choose to use python. :-) It is just a start, but I hope we can clear things up and reduce the barriers for contribution. Comments? Aaron Spike

2 1

Help Wanted: Autopackager
by Aaron Spike 16 Nov '06

16 Nov '06

I took over maintaining the Inkscape Autopackages both to relieve Mike Hearn, who was not an Inkscape developer, and to increase my knowledge in how applications are compiled and packaged on linux. Since then my free time has diminished and my interests have shifted. So I'm looking for an interested group or individual to assume this responsibility. Some knowledge of compiling applications on linux or a strong desire to learn recommended. :-) Anyone? Aaron Spike

2 2

NEW: color effects extensions
by bulia byak 16 Nov '06

16 Nov '06

Contributed by Jos Hirth, with some changes by me: * Color effects: a new group of extensions in the Color submenu of the Effects menu allows you to adjust all colors of a selection at once. These commands affect both fill and stroke colors, including gradients (but not bitmaps). The commands include Brighter and Darker (adjust brightness by up or down by 10%), Desaturate, Grayscale, Negative, commands for removing or swapping the Red, Green, Blue channels, as well as a Custom command where you can set your own formulas for modifying the color channels. These extensions are a temporary solution; in a future version, similar functionality will be added to Inkscape core. Adjusting gradient colors may be buggy because a gradient is sometimes shared by more than one object. Also, undoing color changes on gradients exposes a bug where an object seems to "disappear"; this is however only a display issue (probably caused by the order in which gradients and their users are restored on undo) not causing any loss of information. Finally, on large documents and large selections with gradients, Python's XPath code may get quite slow. Despite these shortcomings, I decided to commit this, because it's genuinely useful functionality which was so far missing in Inkscape. -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org

4 5

SSE2 optimized compositing functions
by Jasper van de Gronde 15 Nov '06

15 Nov '06

Some time ago I wrote versions of a (small) number of compositing functions (from libnr/nr-compose.cpp) using SSE2 (with intrinsics), but I'm not sure how I should integrate them with Inkscape code (separate file? compile settings? ...?). Also, if there is anyone who has some experience with SSE2 I wouldn't mind if they took a look (I don't have very much experience with writing SSE2 and it's quite possible that I'm not achieving optimal performance). BTW, I have code for: nr_R8G8B8A8_P_R8G8B8A8_P_R8G8B8A8_N_A8 nr_R8G8B8A8_P_EMPTY_R8G8B8A8_N_A8 nr_R8G8B8A8_P_R8G8B8A8_P_R8G8B8A8_P And it could probably be adapted to variants of those functions. The SSE2 versions are approximately 2 times as fast as the normal versions (on my machine, a P4).

2 4

new Buildtool stuff for win32
by Bob Jamison 15 Nov '06

15 Nov '06

Hi all, I've been working on a project to replace all of our old aging Makefile.mingw and the Makedep stuff for win32 builds. From the years when I worked in Java, I learned to love the Ant build tool and how it automates many tasks, and replaces a lot of shelling out for trivial tasks (copy, mkdir, delete, etc). So I made this Buildtool thing vaguely similar to Ant. It is of course infinitely less powerful than that mature project. But the basic theory of operation is the same. And if there is ever any new feature or function we need, we can easily code it into the tool. So, instead of requiring Perl, we have a single .cpp file and a build descriptor file, "build.xml," which currently is the only file it needs for a complete Inkscape build. To run the thing, merely do: g++ buildtool.cpp -o build.exe There are no dependencies. Then compile with "build" or clean up with "build clean" I see no reason that an alternative build.xml could not be made for running on Unix, also. bob

2 1

openraster
by Alexandre Prokoudine 15 Nov '06

15 Nov '06

Hi, This is a quick reminder for Inkscape developers that OpenRaster project has been evolving [1] thanks to Cyrille Berger of Krita team and Øyvind Kolås of GEGL/GIMP teams for quite a while now. The project was mentioned in this list early in March this year. I've just checked again and it turned out that it wasn't really much discussed. Here is a short overview. OpenRaster aims to become an OpenDocument format (ODR) for multilayered raster graphics with clipping paths, masks, layer effects etc.. It is going to become a standard for exchanging of project data between users of different applications. Repesentatives of several opensource projects have expressed their interest in supporting this file format by providing either exporting or importing (or both) filters for it, when this standard is approved by respective OASIS TC as such (or even earlier). Krita/SVN and GEGL/CVS HEAD already have initial supporting code. There is a draft document from June 2006 available [2] to read. In case of Inkscape this task might be quite simple, since it can already write OpenDocument Draw documents, and exporting an Inkscape SVG document to ODR, when ODR is ready, would be a matter of exporting each layer to a respective PNG file and combining them into ODR layers, with clipping paths or masks where applicable (some effects like Gaussian blur could be exported to an effect layer, too, possibly by means of XSLT), then saving it to a ZIP archive (sure, I oversimplify this description :)). If any of Inkscape developers is interested in supporting this file format in the future (especially since it is going to have basic vector graphics capabilities) -- at least exporting to it, the team would appreciate your input. Most discussions are held in CREATE mailing list [3]. [1] http://pippin.gimp.org/OpenRaster [2] http://create.freedesktop.org/specs/OpenRaster-draft.pdf [3] http://lists.freedesktop.org/mailman/listinfo/create Alexandre

1 0

cli options
by Alexandre Prokoudine 14 Nov '06

14 Nov '06

Hi, Just for my curiousity, does the -G option (start with gtkmm UI) still make sense? Alexandre

2 3

delay inkscape 0.45 about screen contest ending ?
by Popolon 14 Nov '06

14 Nov '06

The contest was theorically closed today, but don't know were the result are and the The ccHost contest admin tools link is dead (or not born yet) : http://openclipart.org/wiki/Contests#Contest_1_-_Inkscape_0.45_About_Screen Has anyone received submissions ? Could this contest be extended another month to take benefits of new functions ?

2 1

Mailing Lists are Discussion
by Aaron Spike 14 Nov '06

14 Nov '06

I'd like to fold the Mailing Lists menu item on the website into the Discussion section. Comments? Aaron Spike

2 1

mediawiki 1.8.2
by Aaron Spike 14 Nov '06

14 Nov '06

I finally upgraded the wiki to version 1.8.2. Please let me know if there are any problems. Aaron Spike

1 0

Re: [Inkscape-devel] NEW: Trace Bitmap dialog redesign and new parameters
by Derek Hinchliffe 14 Nov '06

14 Nov '06

On 11/14/06, bulia byak <buliabyak@...400...> wrote: > * This dialog now provides access to three more tracing parameters: <snip> > * The dialog is redesigned to use three tabs: Mode, Parameters, > and Preview. The controls are reorganized to be easier to find. Most > labels and tooltips are rewritten for clarity. Nice, it seems much improved. One thing though - would it be better to have the preview not in it's own tab but to double the width (or height) of the window and have the preview separate to the two tabs? Otherwise the steps are Adjust->Change tab->Update->Change tab->Adjust etc instead of Adjust->Update->Adjust... Cheers Derek

1 0

Re: [Inkscape-devel] Inkscape-devel Digest, Vol 6, Issue 15
by Jaime Sanchez 13 Nov '06

13 Nov '06

I would maintain consistency with the transparency range of values: from 0.00 to 1.00 with 2 digits precision. Bulia Byak wrote: > Here's a usability question that I'd like to get some feedback on. > Myself, I'm undecided. > > How to display and input values of opacity and blur? > > 1. As percent, 0 to 100, or 0.0 to 100.0. > > Pro: easier to pronounce; more common in "real life"; spinbutton can > be shorter by one character (dot). > > Contra: requires a "%" label after the spinbutton; if the label is > not there (as e.g. in the statusbar there's little room for it), it > may be more difficult to guess, when you see e.g. "15", that the > maximum is 100; requires a change from the Inkscape status quo. > > 2. As numbers from 0.0 to 1.0 (with two or three significant digits). > > Pro: no need for a % label; easier to guess what the maximum is > (though still not entirely obvious, unless you have a slider too); no > need to change the status quo. > > Contra: slightly more "geeky", more cumbersome to type and > pronounce, requires slightly wider spinbutton. > > Opinions? > > > -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org > ------------------------------ > ---------------------------------------------------------------------- > >

1 0

Autopackage install: undefined symbol: g_option_error_quark
by Jochem Liem 13 Nov '06

13 Nov '06

Dear developers, After an install with autopackage (the latest inkscape200611051452.package), having system maintainance install a new ssl library, and adding some directories to LD_LIBRARY_PATH, I still haven't managed to start inkscape. Trying to start inkscape gives: undefined symbol: g_option_error_quark. Google indicates that other people have (had) the same issue, but I could not find a solution. Any help would be appreciated. Best regards, Jochem /scratch/LinuxPrograms/bin/.proxy.inkscape: /opt/arch/openssl/lib/libcrypto.so.0 .9.8: no version information available (required by /scratch/LinuxPrograms/bin/. proxy.inkscape) /scratch/LinuxPrograms/bin/.proxy.inkscape: /usr/lib/libpng12.so.0: no version i nformation available (required by /scratch/LinuxPrograms/bin/.proxy.inkscape) /scratch/LinuxPrograms/bin/.proxy.inkscape: /opt/arch/openssl/lib/libssl.so.0.9. 8: no version information available (required by /scratch/LinuxPrograms/bin/.pro xy.inkscape) /scratch/LinuxPrograms/bin/.proxy.inkscape: symbol lookup error: /scratch/LinuxP rograms/bin/.proxy.inkscape: undefined symbol: g_option_error_quark -- =-=-=-=-=-=-=-=-=-=-=-=-=-= Jochem Liem =-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Work: Home: Human Computer Studies Laboratory Zuiderkerkstraat 3 Informatics Institute 1501 NE, Zaandam Faculty of Science The Netherlands University of Amsterdam Kruislaan 419, Matrix I, Room 2.25 1098 VA, Amsterdam, The Netherlands http://www.science.uva.nl/~jliem/ Phone: +31 (0)20 8884 666 (work) Phone: +31 (0)75 6122 972 (home) Fax: +31 (0)20 525 6896 (work) Mobile: +31 (0)6 4321 9992 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

1 0

Another attempt at openssl on win2k
by Bob Jamison 13 Nov '06

13 Nov '06

Although I gave up on win2k after all of the headache and heartache of trying to get a win2k-compatible build of openssl, I thought I would try again. Here is a copy I built with VC++ 8 Express and the Win Server 2003 Platform SDK: http://inkscape.modevia.com/win32libs/openssl-0.9.8d-msvc.7z and here is an Inkscape build with it and the -DHAVE_SSL flag: http://inkscape.modevia.com/win32/Inkscape0611100642.7z Could someone please try it on win2k and see if it works? Actually, to see of this version of OpenSSL works on your machine, just running the openssl.exe main app would be a good test. bob

6 10

Fwd: [Inkscape-user-it] Inserire un riferimento a un file ecmascript
by Daniel Díaz 12 Nov '06

12 Nov '06

Hello! >From the Italian Inkscape-User mailing list comes this post. Marco Andreolli is asking where these tags fit in the main SVG file: <script type="text/ecmascript" xlink:href="ajaxrequest.js"/> <script type="text/ecmascript" xlink:href="PrimoPiano.js"/> Within <svg></svg>? Or completely out of that tag? I'll forward your answers to the Italian mailing list. Greetings! Daniel Díaz yosoy@...31... ---------- Forwarded message ---------- From: Marco Andreolli <MarcoAndreolli@...1560...> Date: Nov 10, 2006 6:52 AM Subject: [Inkscape-user-it] Inserire un riferimento a un file ecmascript To: inkscape-user-it(a)lists.sourceforge.net Salve volevo chiedervi come posso inserire in un file svg creato da inkscape un riferimento ad un file di libreria ecmascript; per essere più chiaro vi faccio un esempio: Questo è il file svg <?xml version="1.0" encoding="UTF-8" standalone="no"?>  <svg xmlns:svg="http://www.w3.org/2000/svg" xmlns="http://www.w3.org/2000/svg" version="1.0" width="744.09448" height="1052.3622" id="svg2"> <defs id="defs4" /> <g id="layer1"> <rect width="300" height="171.42857" x="22.857143" y="32.362183" style="fill:#000000;fill-opacity:1;stroke:#000000;stroke-width:1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" id="rect1307" /> </g> </svg> Mentre questi sono i riferimenti ai file di libreria ecmascript. <script type="text/ecmascript" xlink:href="ajaxrequest.js"/> <script type="text/ecmascript" xlink:href="PrimoPiano.js"/> Dove e come li devo inserire nel file svg?? Grazie.

3 2

inkscape win32 dll dependency tree
by Bob Jamison 12 Nov '06

12 Nov '06

Hi, all. I'm just sending this in case anyone is curious about the current DLL dependency tree for Inkscape on win32. The Platform SDK has a tool called the Dependency Walker, and here is the output for inkscape.exe. bob ***************************| Module Dependency Tree |*************************** * * * Legend: F Forwarded Module ? Missing Module 6 64-bit Module * * D Delay Load Module ! Invalid Module * * * Dynamic Module E Import/Export Mismatch or Load Failure * * ^ Duplicate Module * * * ******************************************************************************** [ ] INKSCAPE.EXE [ ] LIBATKMM-1.6-1.DLL [ ^ ] LIBSIGC-2.0-0.DLL [ ] LIBATK-1.0-0.DLL [ ^ ] LIBGLIB-2.0-0.DLL [ ^ ] LIBGOBJECT-2.0-0.DLL [ ^ ] INTL.DLL [ ^ ] KERNEL32.DLL [ ^ ] MSVCRT.DLL [ ^ ] LIBGLIB-2.0-0.DLL [ ^ ] LIBGLIBMM-2.4-1.DLL [ ^ ] LIBGOBJECT-2.0-0.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] MSVCRT.DLL [ ] LIBCAIRO-2.DLL [ ^ ] LIBPNG13.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] MSVCRT.DLL [ ^ ] USER32.DLL [ ^ ] ZLIB1.DLL [ ] LIBGDK-WIN32-2.0-0.DLL [ ^ ] LIBGDK_PIXBUF-2.0-0.DLL [ ^ ] LIBCAIRO-2.DLL [ ^ ] LIBGLIB-2.0-0.DLL [ ^ ] LIBGOBJECT-2.0-0.DLL [ ^ ] LIBPANGO-1.0-0.DLL [ ^ ] LIBPANGOCAIRO-1.0-0.DLL [ ^ ] INTL.DLL [ ^ ] GDI32.DLL [ ^ ] IMM32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] OLE32.DLL [ ^ ] SHELL32.DLL [ ^ ] USER32.DLL [ ] LIBGDK_PIXBUF-2.0-0.DLL [ ^ ] LIBGLIB-2.0-0.DLL [ ^ ] LIBGMODULE-2.0-0.DLL [ ^ ] LIBGOBJECT-2.0-0.DLL [ ^ ] INTL.DLL [ ^ ] KERNEL32.DLL [ ^ ] MSVCRT.DLL [ ^ ] MSVCRT.DLL [ ] LIBGDKMM-2.4-1.DLL [ ^ ] LIBGDK-WIN32-2.0-0.DLL [ ^ ] LIBGDK_PIXBUF-2.0-0.DLL [ ^ ] LIBGLIB-2.0-0.DLL [ ^ ] LIBGLIBMM-2.4-1.DLL [ ^ ] LIBGOBJECT-2.0-0.DLL [ ^ ] LIBGTK-WIN32-2.0-0.DLL [ ^ ] LIBPANGOMM-1.4-1.DLL [ ^ ] LIBSIGC-2.0-0.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] MSVCRT.DLL [ ] LIBGLIB-2.0-0.DLL [ ] ICONV.DLL [ ^ ] MSVCRT.DLL [ ^ ] KERNEL32.DLL [ ^ ] INTL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] MSVCRT.DLL [ ] OLE32.DLL [ ^ ] ADVAPI32.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] RPCRT4.DLL [ ^ ] USER32.DLL [ ^ ] SHELL32.DLL [ ^ ] USER32.DLL [ ^ ] WS2_32.DLL [ ] LIBGLIBMM-2.4-1.DLL [ ^ ] LIBSIGC-2.0-0.DLL [ ^ ] LIBGLIB-2.0-0.DLL [ ] LIBGMODULE-2.0-0.DLL [ ^ ] LIBGLIB-2.0-0.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] MSVCRT.DLL [ ^ ] LIBGOBJECT-2.0-0.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] MSVCRT.DLL [ ] LIBGOBJECT-2.0-0.DLL [ ^ ] LIBGLIB-2.0-0.DLL [ ^ ] KERNEL32.DLL [ ^ ] MSVCRT.DLL [ ] LIBGTK-WIN32-2.0-0.DLL [ ^ ] LIBGDK_PIXBUF-2.0-0.DLL [ ^ ] LIBGDK-WIN32-2.0-0.DLL [ ^ ] LIBATK-1.0-0.DLL [ ^ ] LIBCAIRO-2.DLL [ ^ ] LIBGLIB-2.0-0.DLL [ ^ ] LIBGMODULE-2.0-0.DLL [ ^ ] LIBGOBJECT-2.0-0.DLL [ ^ ] LIBPANGO-1.0-0.DLL [ ^ ] LIBPANGOCAIRO-1.0-0.DLL [ ^ ] INTL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] MSVCRT.DLL [ ^ ] OLE32.DLL [ ^ ] SHELL32.DLL [ ^ ] USER32.DLL [ ] LIBGTKMM-2.4-1.DLL [ ^ ] LIBPANGOMM-1.4-1.DLL [ ^ ] LIBATKMM-1.6-1.DLL [ ^ ] LIBGDK-WIN32-2.0-0.DLL [ ^ ] LIBGDKMM-2.4-1.DLL [ ^ ] LIBGLIB-2.0-0.DLL [ ^ ] LIBGLIBMM-2.4-1.DLL [ ^ ] LIBGOBJECT-2.0-0.DLL [ ^ ] LIBGTK-WIN32-2.0-0.DLL [ ^ ] LIBSIGC-2.0-0.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] MSVCRT.DLL [ ] INTL.DLL [ ^ ] ICONV.DLL [ ^ ] MSVCRT.DLL [ ^ ] KERNEL32.DLL [ ] LIBLCMS-1.DLL [ ^ ] KERNEL32.DLL [ ^ ] MSVCRT.DLL [ ^ ] MSVCRT.DLL [ ] LIBLOUDMOUTH-1-0.DLL [ ^ ] ADVAPI32.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] MSVCRT.DLL [ ^ ] USER32.DLL [ ^ ] WS2_32.DLL [ ^ ] LIBGLIB-2.0-0.DLL [ ^ ] INTL.DLL [ ] LIBPANGO-1.0-0.DLL [ ^ ] LIBGLIB-2.0-0.DLL [ ^ ] LIBGMODULE-2.0-0.DLL [ ^ ] LIBGOBJECT-2.0-0.DLL [ ^ ] KERNEL32.DLL [ ^ ] MSVCRT.DLL [ ] LIBPANGOCAIRO-1.0-0.DLL [ ^ ] LIBPANGO-1.0-0.DLL [ ^ ] LIBPANGOWIN32-1.0-0.DLL [ ^ ] LIBCAIRO-2.DLL [ ^ ] LIBGLIB-2.0-0.DLL [ ^ ] LIBGOBJECT-2.0-0.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [ ^ ] MSVCRT.DLL [ ] LIBPANGOFT2-1.0-0.DLL [ ^ ] LIBPANGO-1.0-0.DLL [ ^ ] LIBGLIB-2.0-0.DLL [ ^ ] LIBGOBJECT-2.0-0.DLL [ ] LIBFONTCONFIG-1.DLL [ ] XMLPARSE.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] FREETYPE6.DLL [ ^ ] KERNEL32.DLL [ ^ ] MSVCRT.DLL [ ^ ] MSVCRT.DLL [ ] FREETYPE6.DLL [ ^ ] ZLIB1.DLL [ ^ ] KERNEL32.DLL [ ^ ] MSVCRT.DLL [ ^ ] KERNEL32.DLL [ ^ ] MSVCRT.DLL [ ] LIBPANGOMM-1.4-1.DLL [ ^ ] LIBSIGC-2.0-0.DLL [ ^ ] LIBGLIB-2.0-0.DLL [ ^ ] LIBGLIBMM-2.4-1.DLL [ ^ ] LIBGOBJECT-2.0-0.DLL [ ^ ] LIBPANGO-1.0-0.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] MSVCRT.DLL [ ] LIBPANGOWIN32-1.0-0.DLL [ ^ ] LIBPANGO-1.0-0.DLL [ ^ ] LIBGLIB-2.0-0.DLL [ ^ ] LIBGOBJECT-2.0-0.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] USER32.DLL [ ] LIBPNG13.DLL [ ^ ] ZLIB1.DLL [ ^ ] KERNEL32.DLL [ ^ ] MSVCRT.DLL [ ] POPT1.DLL [ ] LIBINTL-2.DLL [ ^ ] ICONV.DLL [ ^ ] MSVCRT.DLL [ ^ ] KERNEL32.DLL [ ^ ] KERNEL32.DLL [ ^ ] MSVCRT.DLL [ ^ ] MSVCRT.DLL [ ] LIBSIGC-2.0-0.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] MSVCRT.DLL [ ] ZLIB1.DLL [ ^ ] MSVCRT.DLL [ ^ ] KERNEL32.DLL [ ] ADVAPI32.DLL [ ^ ] NTDLL.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ] RPCRT4.DLL [ ^ ] NTDLL.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [D ] WINTRUST.DLL [ ^ ] MSVCRT.DLL [ ] CRYPT32.DLL [ ^ ] ADVAPI32.DLL [ ^ ] MSVCRT.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ^ ] MSASN1.DLL [ ^ ] RPCRT4.DLL [D ] VERSION.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] NTDLL.DLL [ ] MSASN1.DLL [ ^ ] MSVCRT.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ^ ] USER32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ] IMAGEHLP.DLL [ ^ ] MSVCRT.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [D ] DBGHELP.DLL [ ^ ] MSVCRT.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] VERSION.DLL [ ^ ] ADVAPI32.DLL [ ^ ] RPCRT4.DLL [ ^ ] RPCRT4.DLL [D ] SECUR32.DLL [ ^ ] NTDLL.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [D^ ] NETAPI32.DLL [D^ ] NTDSAPI.DLL [ ] COMDLG32.DLL [ ^ ] SHLWAPI.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ^ ] GDI32.DLL [ ^ ] ADVAPI32.DLL [ ] COMCTL32.DLL [ ^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ^ ] SHELL32.DLL [ ^ ] NTDLL.DLL [D^ ] OLE32.DLL [D^ ] VERSION.DLL [D ] IMM32.DLL [ ^ ] USER32.DLL [ ^ ] NTDLL.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] GDI32.DLL [ ^ ] ADVAPI32.DLL [D^ ] MPR.DLL [D^ ] WINSPOOL.DRV [D ] UXTHEME.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ^ ] GDI32.DLL [ ^ ] ADVAPI32.DLL [ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ] KERNEL32.DLL [ ] NTDLL.DLL [F^ ] NTDLL.DLL [ ] MSVCRT.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ] SHELL32.DLL [ ^ ] ADVAPI32.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] RPCRT4.DLL [ ^ ] SHLWAPI.DLL [ ^ ] USER32.DLL [D^ ] WINMM.DLL [D^ ] MSI.DLL [D ] DEVMGR.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ^ ] OLE32.DLL [ ^ ] ADVAPI32.DLL [ ^ ] GDI32.DLL [ ^ ] SETUPAPI.DLL [ ^ ] VERSION.DLL [ ^ ] SHELL32.DLL [ ^ ] SHLWAPI.DLL [ ] WMI.DLL [F^ ] ADVAPI32.DLL [ ^ ] MPR.DLL [D^ ] APPHELP.DLL [D^ ] URLMON.DLL [D^ ] WININET.DLL [D^ ] SECUR32.DLL [D^ ] WINSPOOL.DRV [D^ ] USERENV.DLL [D^ ] OLE32.DLL [D^ ] OLEAUT32.DLL [D ] OLEACC.DLL [ ^ ] MSVCRT.DLL [ ] MSVCP60.DLL [ ^ ] MSVCRT.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] OLE32.DLL [ ^ ] OLEAUT32.DLL [ ^ ] RPCRT4.DLL [D^ ] VERSION.DLL [D^ ] MPR.DLL [D^ ] NETAPI32.DLL [D ] CSCDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ^ ] ADVAPI32.DLL [D^ ] MPR.DLL [D^ ] NTLANMAN.DLL [D^ ] UXTHEME.DLL [D^ ] CREDUI.DLL [D^ ] RASAPI32.DLL [D ] MSGINA.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] USER32.DLL [ ^ ] NETAPI32.DLL [ ^ ] GDI32.DLL [ ^ ] USERENV.DLL [ ^ ] SHELL32.DLL [ ^ ] SHLWAPI.DLL [ ^ ] COMCTL32.DLL [ ^ ] WINSTA.DLL [ ^ ] RPCRT4.DLL [ ] ODBC32.DLL [ ^ ] MSVCRT.DLL [ ^ ] COMCTL32.DLL [ ^ ] SHELL32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] USER32.DLL [ ^ ] COMDLG32.DLL [D^ ] SECUR32.DLL [D^ ] MSIMG32.DLL [D^ ] CRYPT32.DLL [D ] SHSVCS.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] USER32.DLL [ ^ ] SHLWAPI.DLL [D^ ] WINSTA.DLL [D^ ] UXTHEME.DLL [D^ ] OLE32.DLL [D^ ] SETUPAPI.DLL [D^ ] COMCTL32.DLL [D^ ] NETAPI32.DLL [D^ ] USERENV.DLL [D^ ] SETUPAPI.DLL [D^ ] RASAPI32.DLL [D ] RASDLG.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MPRAPI.DLL [ ^ ] OLE32.DLL [ ^ ] RASAPI32.DLL [ ^ ] RASMAN.DLL [ ^ ] TAPI32.DLL [ ^ ] USER32.DLL [ ^ ] WS2_32.DLL [ ^ ] RPCRT4.DLL [D^ ] MPR.DLL [D^ ] NETAPI32.DLL [D^ ] SETUPAPI.DLL [D^ ] SHELL32.DLL [D^ ] WINSCARD.DLL [D^ ] POWRPROF.DLL [D ] SHDOCVW.DLL [ ^ ] ADVAPI32.DLL [ ^ ] CRYPT32.DLL [ ^ ] CRYPTUI.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] SHLWAPI.DLL [ ^ ] USER32.DLL [D^ ] OLE32.DLL [D^ ] SHELL32.DLL [D^ ] BROWSEUI.DLL [D^ ] OLEAUT32.DLL [D^ ] WININET.DLL [D^ ] URLMON.DLL [D ] MSRATING.DLL [ ^ ] MSVCRT.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ^ ] GDI32.DLL [ ^ ] ADVAPI32.DLL [ ] WSOCK32.DLL [ ^ ] WS2_32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [F^ ] WS2_32.DLL [ ^ ] SHLWAPI.DLL [D ] MSHTML.DLL [ ^ ] ADVAPI32.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ] MSLS31.DLL [ ^ ] MSVCRT.DLL [ ^ ] OLE32.DLL [ ^ ] PSAPI.DLL [ ^ ] SHDOCVW.DLL [ ^ ] SHLWAPI.DLL [ ^ ] USER32.DLL [D^ ] COMCTL32.DLL [D^ ] COMDLG32.DLL [D ] HLINK.DLL [ ^ ] MSVCRT.DLL [ ^ ] ADVAPI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ^ ] OLE32.DLL [ ^ ] SHELL32.DLL [D ] IMGUTIL.DLL [ ^ ] MSVCRT.DLL [ ^ ] ADVAPI32.DLL [ ^ ] USER32.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] OLE32.DLL [ ^ ] OLEAUT32.DLL [D^ ] MPR.DLL [D? ] MSJAVA.DLL [D^ ] MSRATING.DLL [D^ ] OLEAUT32.DLL [D^ ] SHELL32.DLL [D^ ] UXTHEME.DLL [D^ ] URLMON.DLL [D ] USP10.DLL [ ^ ] MSVCRT.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ^ ] GDI32.DLL [ ^ ] ADVAPI32.DLL [D^ ] WININET.DLL [D^ ] MLANG.DLL [D ] INETCOMM.DLL [ ] MSOERT2.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] OLE32.DLL [ ^ ] USER32.DLL [ ^ ] ADVAPI32.DLL [ ^ ] GDI32.DLL [ ^ ] SHLWAPI.DLL [ ^ ] OLEAUT32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] OLE32.DLL [ ^ ] USER32.DLL [ ^ ] ADVAPI32.DLL [ ^ ] GDI32.DLL [ ^ ] SHELL32.DLL [ ^ ] SHLWAPI.DLL [ ^ ] OLEAUT32.DLL [D ] ADVPACK.DLL [ ^ ] MSVCRT.DLL [ ^ ] USER32.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] OLE32.DLL [ ^ ] VERSION.DLL [D ] BROWSEUI.DLL [ ^ ] ADVAPI32.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] OLE32.DLL [ ^ ] SHLWAPI.DLL [ ^ ] USER32.DLL [D^ ] SHDOCVW.DLL [D^ ] OLEAUT32.DLL [D^ ] MPR.DLL [D^ ] SHELL32.DLL [D^ ] WININET.DLL [D^ ] UXTHEME.DLL [D^ ] URLMON.DLL [D^ ] IMM32.DLL [D? ] EFSADU.DLL [D ] LINKINFO.DLL [ ^ ] ADVAPI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] USER32.DLL [D^ ] MPR.DLL [D^ ] MSIMG32.DLL [D ] DUSER.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ^ ] GDI32.DLL [D^ ] COMCTL32.DLL [D^ ] IMAGEHLP.DLL [D^ ] MSIMG32.DLL [D^ ] GDIPLUS.DLL [D ] PRINTUI.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] OLE32.DLL [ ^ ] ADVAPI32.DLL [ ^ ] USER32.DLL [ ^ ] GDI32.DLL [ ^ ] WINSPOOL.DRV [ ^ ] SHELL32.DLL [ ^ ] VERSION.DLL [ ^ ] OLEAUT32.DLL [ ^ ] ACTIVEDS.DLL [F^ ] ADSLDPC.DLL [ ] CFGMGR32.DLL [F^ ] SETUPAPI.DLL [ ^ ] SETUPAPI.DLL [ ^ ] SHLWAPI.DLL [ ^ ] MPR.DLL [ ^ ] WINMM.DLL [D ] CDFVIEW.DLL [ ^ ] ADVAPI32.DLL [ ^ ] COMCTL32.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] OLEAUT32.DLL [ ^ ] SHELL32.DLL [ ^ ] SHLWAPI.DLL [ ^ ] USER32.DLL [D^ ] URLMON.DLL [D^ ] WININET.DLL [D^ ] OLE32.DLL [D^ ] SETUPAPI.DLL [D^ ] APPHELP.DLL [D ] QUERY.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ^ ] RPCRT4.DLL [ ^ ] OLEAUT32.DLL [ ^ ] SHELL32.DLL [ ^ ] SHLWAPI.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] OLE32.DLL [D ] GDIPLUS.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ^ ] GDI32.DLL [ ^ ] OLE32.DLL [ ^ ] ADVAPI32.DLL [D^ ] IMM32.DLL [ ] USER32.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] NTDLL.DLL [D^ ] ADVAPI32.DLL [D ] MSIMG32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] GDI32.DLL [D ] POWRPROF.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [D ] WINSTA.DLL [ ^ ] NTDLL.DLL [ ^ ] RPCRT4.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ] NETAPI32.DLL [ ^ ] ADVAPI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] RPCRT4.DLL [D^ ] SECUR32.DLL [D ] NTDSAPI.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] DNSAPI.DLL [ ^ ] RPCRT4.DLL [ ^ ] WLDAP32.DLL [ ^ ] NETAPI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] SECUR32.DLL [ ^ ] WS2_32.DLL [D ] W32TOPL.DLL [ ^ ] NTDLL.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [D ] NETRAP.DLL [ ^ ] MSVCRT.DLL [ ^ ] KERNEL32.DLL [ ^ ] NTDLL.DLL [D ] SAMLIB.DLL [ ^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] RPCRT4.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] USER32.DLL [D^ ] WS2_32.DLL [D ] WLDAP32.DLL [ ^ ] MSVCRT.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [D ] DNSAPI.DLL [ ^ ] ADVAPI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] RPCRT4.DLL [ ^ ] WS2_32.DLL [D ] IPHLPAPI.DLL [ ^ ] ADVAPI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ^ ] WS2_32.DLL [D ] DHCPCSVC.DLL [ ^ ] ADVAPI32.DLL [ ^ ] DNSAPI.DLL [ ^ ] IPHLPAPI.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] RPCRT4.DLL [ ^ ] SECUR32.DLL [ ^ ] USER32.DLL [ ^ ] WS2_32.DLL [D ] MPRAPI.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ] ACTIVEDS.DLL [ ] ADSLDPC.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] NETAPI32.DLL [ ^ ] WLDAP32.DLL [ ^ ] ADVAPI32.DLL [ ^ ] USER32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ] ATL.DLL [ ^ ] MSVCRT.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ^ ] GDI32.DLL [D^ ] ADVAPI32.DLL [D^ ] OLE32.DLL [D^ ] OLEAUT32.DLL [ ^ ] NTDLL.DLL [ ^ ] OLE32.DLL [ ^ ] ADVAPI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ^ ] OLEAUT32.DLL [ ^ ] NETAPI32.DLL [ ^ ] ADVAPI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] NETAPI32.DLL [ ^ ] OLE32.DLL [ ] OLEAUT32.DLL [ ^ ] MSVCRT.DLL [ ^ ] USER32.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] OLE32.DLL [ ^ ] RPCRT4.DLL [ ^ ] RPCRT4.DLL [ ] RTUTILS.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ^ ] SAMLIB.DLL [ ] SETUPAPI.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] RPCRT4.DLL [ ^ ] USER32.DLL [D ] LZ32.DLL [F^ ] KERNEL32.DLL [D ] CABINET.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] OLE32.DLL [D^ ] CRYPT32.DLL [D^ ] IMAGEHLP.DLL [D ] MPR.DLL [ ^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] USER32.DLL [D ] MPRUI.DLL [ ^ ] MPR.DLL [ ^ ] MSVCRT.DLL [ ] NETUI0.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ] NETUI2.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] NETUI0.DLL [ ] NETUI1.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] NETUI0.DLL [ ^ ] NETAPI32.DLL [ ^ ] NETRAP.DLL [ ^ ] SAMLIB.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] USER32.DLL [ ^ ] GDI32.DLL [ ^ ] COMDLG32.DLL [ ^ ] SAMLIB.DLL [ ^ ] USER32.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [D ] NETPLWIZ.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ^ ] ADVAPI32.DLL [ ^ ] GDI32.DLL [ ^ ] SHELL32.DLL [ ^ ] SHLWAPI.DLL [ ^ ] NETAPI32.DLL [ ^ ] OLE32.DLL [ ^ ] OLEAUT32.DLL [ ^ ] MPR.DLL [ ^ ] NTDSAPI.DLL [ ^ ] SECUR32.DLL [ ^ ] URLMON.DLL [D^ ] WININET.DLL [D^ ] ACTIVEDS.DLL [D^ ] RASDLG.DLL [D^ ] RASAPI32.DLL [D^ ] CREDUI.DLL [D^ ] CREDUI.DLL [D ] CREDUI.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] USER32.DLL [ ^ ] SHELL32.DLL [ ^ ] GDI32.DLL [D^ ] OLE32.DLL [D^ ] NETAPI32.DLL [D^ ] CRYPT32.DLL [D ] CRYPTUI.DLL [ ^ ] MSVCRT.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] WINTRUST.DLL [ ^ ] CRYPT32.DLL [ ^ ] USER32.DLL [ ^ ] OLEAUT32.DLL [ ^ ] GDI32.DLL [ ^ ] RPCRT4.DLL [ ^ ] NETAPI32.DLL [ ^ ] WININET.DLL [ ^ ] WLDAP32.DLL [ ^ ] VERSION.DLL [ ^ ] SHLWAPI.DLL [D^ ] OLE32.DLL [D^ ] SHELL32.DLL [D ] MSSIGN32.DLL [ ^ ] MSVCRT.DLL [ ^ ] ADVAPI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ^ ] OLE32.DLL [ ^ ] CRYPT32.DLL [ ^ ] WININET.DLL [ ^ ] VERSION.DLL [D ] CERTCLI.DLL [ ^ ] MSVCRT.DLL [ ^ ] ATL.DLL [ ^ ] NTDLL.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] WLDAP32.DLL [ ^ ] OLE32.DLL [ ^ ] OLEAUT32.DLL [ ^ ] SECUR32.DLL [ ^ ] USER32.DLL [ ^ ] RPCRT4.DLL [ ^ ] NETAPI32.DLL [ ^ ] CRYPTUI.DLL [ ^ ] CRYPT32.DLL [D ] WINSCARD.DLL [ ^ ] MSVCRT.DLL [ ^ ] ADVAPI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ] WTSAPI32.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] WINSTA.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] USER32.DLL [ ^ ] RPCRT4.DLL [D ] REGAPI.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [D^ ] SAMLIB.DLL [D^ ] USER32.DLL [D^ ] NETAPI32.DLL [D ] UTILDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] WINSTA.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] USER32.DLL [ ^ ] TAPI32.DLL [ ^ ] SETUPAPI.DLL [ ^ ] NETAPI32.DLL [D^ ] NETAPI32.DLL [D^ ] DNSAPI.DLL [D^ ] SECUR32.DLL [D^ ] OLE32.DLL [D ] SCECLI.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] RPCRT4.DLL [ ^ ] SETUPAPI.DLL [ ^ ] USER32.DLL [ ^ ] NETAPI32.DLL [ ^ ] USERENV.DLL [ ^ ] OLEAUT32.DLL [ ^ ] OLE32.DLL [D^ ] SHELL32.DLL [D ] SHLWAPI.DLL [ ^ ] ADVAPI32.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] USER32.DLL [D^ ] OLE32.DLL [D^ ] APPHELP.DLL [D ] MLANG.DLL [ ^ ] MSVCRT.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ^ ] GDI32.DLL [ ^ ] ADVAPI32.DLL [ ^ ] OLE32.DLL [ ^ ] VERSION.DLL [D^ ] COMCTL32.DLL [D^ ] CRYPT32.DLL [D^ ] WINTRUST.DLL [DE ] MPR.DLL [D^ ] OLEAUT32.DLL [D ] MSI.DLL [ ^ ] ADVAPI32.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] RPCRT4.DLL [ ^ ] USER32.DLL [D^ ] SETUPAPI.DLL [D^ ] USERENV.DLL [D ] URLMON.DLL [ ^ ] ADVAPI32.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] OLE32.DLL [ ^ ] RPCRT4.DLL [ ^ ] SHLWAPI.DLL [ ^ ] USER32.DLL [ ^ ] VERSION.DLL [D ] WININET.DLL [ ^ ] ADVAPI32.DLL [ ^ ] CRYPT32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] OLEAUT32.DLL [ ^ ] SHLWAPI.DLL [ ^ ] USER32.DLL [D^ ] OLE32.DLL [D ] TAPI32.DLL [ ^ ] MSVCRT.DLL [ ^ ] ADVAPI32.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] RPCRT4.DLL [ ^ ] SHLWAPI.DLL [ ^ ] USER32.DLL [ ^ ] RTUTILS.DLL [ ^ ] WINMM.DLL [D^ ] VERSION.DLL [D^ ] GDI32.DLL [D^ ] SHELL32.DLL [D^ ] MPR.DLL [D^ ] SHELL32.DLL [D ] WINMM.DLL [ ^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] RPCRT4.DLL [D^ ] VERSION.DLL [D^ ] COMDLG32.DLL [D^ ] VERSION.DLL [D ] WINSPOOL.DRV [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] RPCRT4.DLL [ ^ ] ADVAPI32.DLL [ ^ ] USER32.DLL [D^ ] OLE32.DLL [D^ ] OLEAUT32.DLL [D^ ] ACTIVEDS.DLL [D^ ] NETAPI32.DLL [D^ ] NTDSAPI.DLL [D^ ] DNSAPI.DLL [D^ ] WINTRUST.DLL [D ] USERENV.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] RPCRT4.DLL [ ^ ] USER32.DLL [D ] AUTHZ.DLL [ ^ ] ADVAPI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] RPCRT4.DLL [D^ ] SAMLIB.DLL [D^ ] WLDAP32.DLL [D^ ] NETAPI32.DLL [D^ ] SECUR32.DLL [D^ ] DNSAPI.DLL [D^ ] NETAPI32.DLL [D^ ] NTDSAPI.DLL [D^ ] SECUR32.DLL [D^ ] OLE32.DLL [D^ ] OLEAUT32.DLL [D ] NTLANMAN.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] NETUI0.DLL [ ^ ] NETUI1.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] NETAPI32.DLL [D ] APPHELP.DLL [ ^ ] NTDLL.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [D^ ] SHLWAPI.DLL [D^ ] USER32.DLL [D^ ] VERSION.DLL [ ^ ] USER32.DLL [D ] NETMAN.DLL [ ^ ] ADVAPI32.DLL [ ^ ] IPHLPAPI.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MPRAPI.DLL [ ^ ] MSVCRT.DLL [ ^ ] NETAPI32.DLL [ ] NETSHELL.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] RTUTILS.DLL [ ^ ] ADVAPI32.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] CREDUI.DLL [ ^ ] OLE32.DLL [ ^ ] OLEAUT32.DLL [ ^ ] RPCRT4.DLL [ ^ ] SHLWAPI.DLL [ ^ ] SHELL32.DLL [ ^ ] USER32.DLL [ ^ ] WS2_32.DLL [ ^ ] ATL.DLL [ ^ ] IPHLPAPI.DLL [D^ ] WZCSAPI.DLL [D ] WZCDLG.DLL [ ^ ] MSVCRT.DLL [ ^ ] ATL.DLL [ ^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] CRYPT32.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] OLE32.DLL [ ^ ] OLEAUT32.DLL [ ^ ] RTUTILS.DLL [ ^ ] USER32.DLL [ ^ ] SHELL32.DLL [ ^ ] SHLWAPI.DLL [ ^ ] UXTHEME.DLL [ ^ ] MSIMG32.DLL [ ] WINHTTP.DLL [ ^ ] MSVCRT.DLL [ ^ ] SHLWAPI.DLL [ ^ ] ADVAPI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ^ ] WZCSAPI.DLL [ ^ ] NETSHELL.DLL [D^ ] NETCFGX.DLL [D^ ] DHCPCSVC.DLL [D^ ] DNSAPI.DLL [D ] MOBSYNC.DLL [ ^ ] MSVCRT.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] USER32.DLL [ ^ ] ADVAPI32.DLL [ ^ ] OLE32.DLL [ ^ ] COMCTL32.DLL [ ^ ] GDI32.DLL [ ^ ] RPCRT4.DLL [D^ ] MPRAPI.DLL [D^ ] NETAPI32.DLL [D^ ] RASAPI32.DLL [D^ ] RASDLG.DLL [D^ ] SETUPAPI.DLL [D^ ] WINSPOOL.DRV [ ^ ] NTDLL.DLL [ ^ ] OLE32.DLL [ ^ ] OLEAUT32.DLL [ ^ ] RASAPI32.DLL [ ^ ] RTUTILS.DLL [ ^ ] SECUR32.DLL [ ^ ] SHELL32.DLL [ ^ ] USER32.DLL [ ^ ] WININET.DLL [ ^ ] WS2_32.DLL [ ] WZCSAPI.DLL [ ^ ] NTDLL.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] RPCRT4.DLL [ ^ ] ADVAPI32.DLL [ ^ ] OLE32.DLL [ ^ ] OLEAUT32.DLL [ ^ ] USER32.DLL [ ^ ] RTUTILS.DLL [ ] WZCSVC.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] RPCRT4.DLL [ ^ ] ADVAPI32.DLL [ ^ ] USER32.DLL [ ^ ] RTUTILS.DLL [ ^ ] WMI.DLL [F^ ] ADVAPI32.DLL [ ^ ] DHCPCSVC.DLL [ ^ ] OLE32.DLL [ ^ ] OLEAUT32.DLL [ ^ ] CRYPT32.DLL [ ^ ] SECUR32.DLL [ ^ ] WTSAPI32.DLL [ ^ ] SHLWAPI.DLL [ ] ESENT.DLL [ ^ ] ADVAPI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL [ ^ ] USER32.DLL [ ^ ] WLDAP32.DLL [ ^ ] NETAPI32.DLL [ ^ ] ATL.DLL [ ^ ] WINSTA.DLL [D ] NETCFGX.DLL [ ^ ] SHLWAPI.DLL [ ] CLUSAPI.DLL [ ^ ] MSVCRT.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] RPCRT4.DLL [ ^ ] NTDLL.DLL [ ^ ] OLE32.DLL [ ^ ] OLEAUT32.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] DNSAPI.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] OLE32.DLL [ ^ ] OLEAUT32.DLL [ ^ ] USER32.DLL [D^ ] NETSHELL.DLL [D^ ] COMCTL32.DLL [D^ ] COMDLG32.DLL [D^ ] MPRAPI.DLL [D ] MSWSOCK.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] RPCRT4.DLL [ ^ ] WS2_32.DLL [ ^ ] WS2HELP.DLL [D^ ] USER32.DLL [D^ ] DNSAPI.DLL [D^ ] IPHLPAPI.DLL [D^ ] OLE32.DLL [D^ ] NETAPI32.DLL [D^ ] RASAPI32.DLL [D^ ] RTUTILS.DLL [D^ ] SETUPAPI.DLL [D^ ] SHELL32.DLL [D^ ] WINSPOOL.DRV [D^ ] WS2_32.DLL [D^ ] RASMAN.DLL [D ] HNETCFG.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] GDI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] RPCRT4.DLL [ ^ ] USER32.DLL [D^ ] COMCTL32.DLL [D^ ] DHCPCSVC.DLL [D^ ] IPHLPAPI.DLL [D^ ] NETAPI32.DLL [D^ ] OLE32.DLL [D^ ] OLEAUT32.DLL [D^ ] POWRPROF.DLL [D^ ] RASAPI32.DLL [D^ ] SHLWAPI.DLL [D^ ] WININET.DLL [D^ ] WS2_32.DLL [D^ ] SHELL32.DLL [D^ ] NETSHELL.DLL [D^ ] RASDLG.DLL [D^ ] SETUPAPI.DLL [D^ ] USERENV.DLL [D^ ] WMI.DLL [F^ ] ADVAPI32.DLL [D^ ] OLE32.DLL [D ] PSAPI.DLL [ ^ ] NTDLL.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [D^ ] IMAGEHLP.DLL [D ] RASAPI32.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ] RASMAN.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] RPCRT4.DLL [ ^ ] WS2_32.DLL [ ^ ] USER32.DLL [ ^ ] NETAPI32.DLL [ ^ ] TAPI32.DLL [ ^ ] USER32.DLL [ ^ ] RPCRT4.DLL [D^ ] NETAPI32.DLL [D^ ] WS2_32.DLL [D^ ] SHELL32.DLL [D^ ] USER32.DLL [D^ ] USER32.DLL [ ^ ] USER32.DLL [ ] WS2_32.DLL [ ^ ] MSVCRT.DLL [ ^ ] NTDLL.DLL [ ] WS2HELP.DLL [ ^ ] NTDLL.DLL [ ^ ] ADVAPI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [D^ ] USER32.DLL [ ^ ] ADVAPI32.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [D^ ] USER32.DLL [ ] LIBXML2.DLL [ ^ ] WSOCK32.DLL [F^ ] WS2_32.DLL [ ^ ] ICONV.DLL [ ^ ] ZLIB1.DLL [ ^ ] KERNEL32.DLL [F^ ] NTDLL.DLL [ ^ ] MSVCRT.DLL ********************************| Module List |********************************* * * * Legend: D Delay Load Module ? Missing Module 6 64-bit Module * * * Dynamic Module ! Invalid Module * * E Import/Export Mismatch or Load Failure * * * ******************************************************************************** Module File Time Stamp Link Time Stamp File Size Attr. Link Checksum Real Checksum CPU Subsystem Symbols Preferred Base Actual Base Virtual Size Load Order File Ver Product Ver Image Ver Linker Ver OS Ver Subsystem Ver ----- ----------------------- ----------------- ----------------- ---------- ----- ------------- ------------- --- --------- ------- -------------- ----------- ------------ ---------- --------------- --------------- --------- ---------- ------ ------------- [D? ] EFSADU.DLL Error opening file. The system cannot find the file specified (2). [D? ] MSJAVA.DLL Error opening file. The system cannot find the file specified (2). [D ] MPR.DLL 08/04/2004 6:00a 08/04/2004 1:56a 59,904 A 0x00018245 0x00018245 x86 Console CV 0x71B20000 Unknown 0x00012000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [ ] ADVAPI32.DLL 08/04/2004 6:00a 08/04/2004 1:56a 616,960 A 0x000A0DE4 0x000A0DE4 x86 Console CV 0x77DD0000 Unknown 0x0009B000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [ ] COMCTL32.DLL 08/04/2004 6:00a 08/04/2004 1:56a 611,328 A 0x0009F085 0x0009F085 x86 GUI CV 0x5D090000 Unknown 0x00097000 Not Loaded 5.82.2900.2180 6.0.2900.2180 5.1 7.10 5.1 4.0 [ ] COMDLG32.DLL 08/04/2004 6:00a 08/04/2004 1:56a 276,992 A 0x0004B1DF 0x0004B1DF x86 GUI CV 0x763B0000 Unknown 0x00049000 Not Loaded 6.0.2900.2180 6.0.2900.2180 5.1 7.10 5.1 4.10 [ ] FREETYPE6.DLL 09/10/2005 5:14p 09/10/2005 9:14a 455,680 A 0x00074E58 0x00074E58 x86 Console None 0x66FC0000 Unknown 0x00074000 Not Loaded 2.1.10.2079 2.1.10.2079 2.1 2.56 4.0 4.0 [ ] GDI32.DLL 12/28/2005 8:54p 12/28/2005 8:54p 280,064 A 0x0004D0D0 0x0004D0D0 x86 Console CV 0x77F10000 Unknown 0x00047000 Not Loaded 5.1.2600.2818 5.1.2600.2818 5.1 7.10 5.1 4.10 [ ] ICONV.DLL 05/23/2003 11:45a 05/23/2003 11:45a 892,928 A 0x00000000 0x000DDABE x86 GUI None 0x10000000 Unknown 0x000DA000 Not Loaded 1.9.0.0 1.9.0.0 0.0 6.0 4.0 4.0 [ ] IMM32.DLL 08/04/2004 6:00a 08/04/2004 1:56a 110,080 A 0x0002A024 0x0002A024 x86 GUI CV 0x76390000 Unknown 0x0001D000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [ ] INKSCAPE.EXE 11/10/2006 6:35a 11/10/2006 6:35a 7,460,352 A 0x007281B1 0x007281B1 x86 GUI None 0x00400000 Unknown 0x00736000 Not Loaded N/A N/A 1.0 2.56 4.0 4.0 [ ] INTL.DLL 01/10/2004 4:02a 01/10/2004 4:02a 45,056 A 0x00000000 0x0000F60D x86 GUI None 0x10000000 Unknown 0x0000B000 Not Loaded 0.12.0.0 0.12.0.0 0.0 6.0 4.0 4.0 [ ] KERNEL32.DLL 07/05/2006 4:55a 07/05/2006 4:55a 984,064 A 0x000F724D 0x000F724D x86 Console CV 0x7C800000 Unknown 0x000F4000 Not Loaded 5.1.2600.2945 5.1.2600.2945 5.1 7.10 5.1 4.0 [ ] LIBATK-1.0-0.DLL 09/07/2005 11:42p 09/07/2005 2:42p 140,584 A 0x00025836 0x00025836 x86 Console None 0x10000000 Unknown 0x0001C000 Not Loaded 1.10.3.0 1.10.3.0 1.0 2.56 4.0 4.0 [ ] LIBATKMM-1.6-1.DLL 08/20/2006 11:32a 08/20/2006 11:16a 2,749,308 A 0x002A2670 0x002A2670 x86 Console None 0x6E980000 Unknown 0x0027E000 Not Loaded N/A N/A 1.0 2.56 4.0 4.0 [ ] LIBCAIRO-2.DLL 08/20/2006 12:52p 08/20/2006 4:52a 438,055 A 0x0007025B 0x0007025B x86 Console None 0x67AC0000 Unknown 0x00056000 Not Loaded N/A N/A 1.0 2.56 4.0 4.0 [ ] LIBFONTCONFIG-1.DLL 04/11/2004 6:16p 04/11/2004 6:15p 181,333 A 0x000371CA 0x000371CA x86 Console None 0x00000000 Unknown 0x00025000 Not Loaded N/A N/A 1.0 2.56 4.0 4.0 [ ] LIBGDK-WIN32-2.0-0.DLL 08/11/2006 9:27p 08/11/2006 1:27p 672,377 A 0x000AA225 0x000AA225 x86 Console None 0x6B040000 Unknown 0x000A6000 Not Loaded 2.8.20.0 2.8.20.0 1.0 2.56 4.0 4.0 [ ] LIBGDK_PIXBUF-2.0-0.DLL 08/11/2006 9:27p 08/11/2006 1:27p 92,183 A 0x0001B62E 0x0001B62E x86 Console None 0x64040000 Unknown 0x0001B000 Not Loaded 2.8.20.0 2.8.20.0 1.0 2.56 4.0 4.0 [ ] LIBGDKMM-2.4-1.DLL 08/20/2006 11:33a 08/20/2006 11:33a 4,180,074 A 0x00404C32 0x00404C32 x86 Console None 0x6A140000 Unknown 0x003C8000 Not Loaded N/A N/A 1.0 2.56 4.0 4.0 [ ] LIBGLIB-2.0-0.DLL 07/24/2006 2:23p 07/24/2006 6:23a 627,290 A 0x0009BDE0 0x0009BDE0 x86 Console None 0x10000000 Unknown 0x0009C000 Not Loaded 2.12.1.0 2.12.1.0 1.0 2.56 4.0 4.0 [ ] LIBGLIBMM-2.4-1.DLL 08/20/2006 11:09a 08/20/2006 11:09a 9,312,899 A 0x008E5FCC 0x008E5FCC x86 Console None 0x664C0000 Unknown 0x00854000 Not Loaded N/A N/A 1.0 2.56 4.0 4.0 [ ] LIBGMODULE-2.0-0.DLL 07/24/2006 2:23p 07/24/2006 6:23a 17,126 A 0x00011BEE 0x00011BEE x86 Console None 0x10000000 Unknown 0x0000A000 Not Loaded 2.12.1.0 2.12.1.0 1.0 2.56 4.0 4.0 [ ] LIBGOBJECT-2.0-0.DLL 07/24/2006 2:23p 07/24/2006 6:23a 225,794 A 0x00045659 0x00045659 x86 Console None 0x10000000 Unknown 0x0003B000 Not Loaded 2.12.1.0 2.12.1.0 1.0 2.56 4.0 4.0 [ ] LIBGTK-WIN32-2.0-0.DLL 08/11/2006 9:27p 08/11/2006 1:27p 3,158,946 A 0x0030D84A 0x0030D84A x86 Console None 0x60480000 Unknown 0x002FF000 Not Loaded 2.8.20.0 2.8.20.0 1.0 2.56 4.0 4.0 [ ] LIBGTKMM-2.4-1.DLL 08/20/2006 11:35a 08/20/2006 11:35a 20,506,059 A 0x0139AAF4 0x0139AAF4 x86 Console None 0x6C1C0000 Unknown 0x0124C000 Not Loaded N/A N/A 1.0 2.56 4.0 4.0 [ ] LIBINTL-2.DLL 01/10/2004 4:02a 01/10/2004 4:02a 45,056 A 0x00000000 0x0000F60D x86 GUI None 0x10000000 Unknown 0x0000B000 Not Loaded 0.12.0.0 0.12.0.0 0.0 6.0 4.0 4.0 [ ] LIBLCMS-1.DLL 04/03/2006 8:54p 04/03/2006 8:53p 1,261,154 A 0x0013E26F 0x0013E26F x86 Console None 0x10000000 Unknown 0x00131000 Not Loaded N/A N/A 1.0 2.56 4.0 4.0 [ ] LIBLOUDMOUTH-1-0.DLL 05/06/2006 12:39p 05/06/2006 12:38p 2,074,303 A 0x00206CE6 0x00206CE6 x86 Console None 0x68000000 Unknown 0x001C1000 Not Loaded N/A N/A 1.0 2.56 4.0 4.0 [ ] LIBPANGO-1.0-0.DLL 08/28/2006 9:18p 08/28/2006 1:18p 223,998 A 0x0003ADCF 0x0003ADCF x86 Console None 0x64280000 Unknown 0x0003A000 Not Loaded 1.14.2.0 1.14.2.0 1.0 2.56 4.0 4.0 [ ] LIBPANGOCAIRO-1.0-0.DLL 08/28/2006 9:18p 08/28/2006 1:18p 37,440 A 0x00010989 0x00010989 x86 Console None 0x6C1C0000 Unknown 0x0000D000 Not Loaded N/A N/A 1.0 2.56 4.0 4.0 [ ] LIBPANGOFT2-1.0-0.DLL 08/28/2006 9:18p 08/28/2006 1:18p 228,872 A 0x0003F54F 0x0003F54F x86 Console None 0x6C400000 Unknown 0x0003A000 Not Loaded 1.14.2.0 1.14.2.0 1.0 2.56 4.0 4.0 [ ] LIBPANGOMM-1.4-1.DLL 08/20/2006 11:32a 08/20/2006 11:15a 3,055,615 A 0x002F62DB 0x002F62DB x86 Console None 0x6EAC0000 Unknown 0x002C8000 Not Loaded N/A N/A 1.0 2.56 4.0 4.0 [ ] LIBPANGOWIN32-1.0-0.DLL 08/28/2006 9:18p 08/28/2006 1:18p 58,699 A 0x00017FAD 0x00017FAD x86 Console None 0x69F80000 Unknown 0x00012000 Not Loaded 1.14.2.0 1.14.2.0 1.0 2.56 4.0 4.0 [ ] LIBPNG13.DLL 12/03/2004 6:09p 12/03/2004 6:09p 203,264 A 0x0003E738 0x0003E738 x86 Console None 0x67580000 Unknown 0x00036000 Not Loaded 1.2.8.1799 1.2.8.1799 1.2 2.56 4.0 4.0 [ ] LIBSIGC-2.0-0.DLL 08/20/2006 10:59a 08/20/2006 10:52a 4,183,721 A 0x0040A89A 0x0040A89A x86 Console None 0x10000000 Unknown 0x00399000 Not Loaded N/A N/A 1.0 2.56 4.0 4.0 [ ] LIBXML2.DLL 05/03/2005 8:36p 05/03/2005 1:36p 1,503,232 A 0x00000000 0x0017339D x86 GUI CV 0x10000000 Unknown 0x00170000 Not Loaded N/A N/A 2.6 7.10 4.0 4.0 [ ] MSVCRT.DLL 08/04/2004 6:00a 08/04/2004 1:59a 343,040 0x00057CD3 0x00057CD3 x86 GUI CV 0x77C10000 Unknown 0x00058000 Not Loaded 7.0.2600.2180 6.1.8638.2180 5.1 7.10 5.1 4.0 [ ] NTDLL.DLL 08/04/2004 6:00a 08/04/2004 1:56a 708,096 A 0x000AF2F7 0x000AF2F7 x86 Console CV 0x7C900000 Unknown 0x000B0000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.10 [ ] OLE32.DLL 07/25/2005 10:20p 07/25/2005 10:20p 1,285,632 A 0x0013A1A6 0x0013A1A6 x86 Console CV 0x774E0000 Unknown 0x0013D000 Not Loaded 5.1.2600.2726 5.1.2600.2726 5.1 7.10 5.1 4.0 [ ] POPT1.DLL 10/04/2003 6:06a 10/04/2003 6:06a 45,530 A 0x00017FC2 0x00017FC2 x86 Console None 0x60240000 Unknown 0x0000D000 Not Loaded 1.8.1372.25393 1.8.1372.25393 1.0 2.56 4.0 4.0 [ ] RPCRT4.DLL 08/04/2004 6:00a 08/04/2004 1:56a 581,120 A 0x0009C482 0x0009C482 x86 Console CV 0x77E70000 Unknown 0x00091000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.10 [ ] SHELL32.DLL 07/13/2006 7:33a 07/13/2006 7:33a 8,453,632 A 0x00816C54 0x00816C54 x86 GUI CV 0x7C9C0000 Unknown 0x00815000 Not Loaded 6.0.2900.2951 6.0.2900.2951 5.1 7.10 5.1 4.10 [ ] SHLWAPI.DLL 06/23/2006 5:02a 06/23/2006 5:02a 474,112 A 0x00078A1A 0x00078A1A x86 GUI CV 0x77F60000 Unknown 0x00076000 Not Loaded 6.0.2900.2937 6.0.2900.2937 5.1 7.10 5.1 4.0 [ ] USER32.DLL 03/02/2005 12:09p 03/02/2005 12:09p 577,024 A 0x0009505C 0x0009505C x86 GUI CV 0x77D40000 Unknown 0x00090000 Not Loaded 5.1.2600.2622 5.1.2600.2622 5.1 7.10 5.1 4.0 [ ] WS2_32.DLL 08/04/2004 6:00a 08/04/2004 1:57a 82,944 A 0x0002030B 0x0002030B x86 Console CV 0x71AB0000 Unknown 0x00017000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.10 [ ] WS2HELP.DLL 08/04/2004 6:00a 08/04/2004 1:57a 19,968 A 0x0000AFF6 0x0000AFF6 x86 Console CV 0x71AA0000 Unknown 0x00008000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [ ] WSOCK32.DLL 08/04/2004 6:00a 08/04/2004 1:57a 22,528 A 0x00012C31 0x00012C31 x86 Console CV 0x71AD0000 Unknown 0x00009000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.10 [ ] XMLPARSE.DLL 09/09/2004 11:32a 07/23/2004 10:56p 151,552 A 0x00000000 0x00030026 x86 GUI None 0x10000000 Unknown 0x00025000 Not Loaded N/A N/A 0.0 6.0 4.0 4.0 [ ] ZLIB1.DLL 10/04/2004 6:08p 10/04/2004 6:07p 55,808 A 0x0001286E 0x0001286E x86 GUI None 0x10000000 Unknown 0x00012000 Not Loaded 1.2.2.0 1.2.2.0 0.0 7.10 4.0 4.0 [D ] ACTIVEDS.DLL 08/04/2004 6:00a 08/04/2004 1:56a 194,048 A 0x00037ECF 0x00037ECF x86 Console CV 0x77CC0000 Unknown 0x00032000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] ADSLDPC.DLL 08/04/2004 6:00a 08/04/2004 1:56a 143,360 A 0x00026305 0x00026305 x86 Console CV 0x76E10000 Unknown 0x00025000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] ADVPACK.DLL 08/04/2004 6:00a 08/04/2004 1:56a 99,840 A 0x000230E0 0x000230E0 x86 GUI CV 0x75260000 Unknown 0x00029000 Not Loaded 6.0.2900.2180 6.0.2900.2180 5.1 7.10 5.1 4.0 [D ] APPHELP.DLL 08/04/2004 6:00a 08/04/2004 1:56a 126,976 A 0x00026328 0x00026328 x86 GUI CV 0x77B40000 Unknown 0x00022000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] ATL.DLL 08/04/2004 6:00a 08/04/2004 1:56a 58,880 0x00013D20 0x00013D20 x86 Console CV 0x76B20000 Unknown 0x00011000 Not Loaded 3.5.2284.0 6.5.0.2284 5.1 7.10 5.1 4.10 [D ] AUTHZ.DLL 03/02/2005 12:09p 03/02/2005 12:09p 56,832 A 0x0000E2D5 0x0000E2D5 x86 Console CV 0x776C0000 Unknown 0x00011000 Not Loaded 5.1.2600.2622 5.1.2600.2622 5.1 7.10 5.1 4.10 [D ] BROWSEUI.DLL 06/23/2006 5:02a 06/23/2006 5:02a 1,022,976 A 0x001050CD 0x001050CD x86 GUI CV 0x75F80000 Unknown 0x000FD000 Not Loaded 6.0.2900.2937 6.0.2900.2937 5.1 7.10 5.1 4.0 [D ] CABINET.DLL 08/04/2004 6:00a 08/04/2004 1:56a 59,904 A 0x00019ACF 0x00019ACF x86 GUI CV 0x75150000 Unknown 0x00014000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] CDFVIEW.DLL 06/23/2006 5:02a 06/23/2006 5:02a 151,040 A 0x0002AA8B 0x0002AA8B x86 GUI CV 0x6FAA0000 Unknown 0x00027000 Not Loaded 6.0.2900.2937 6.0.2900.2937 5.1 7.10 5.1 4.0 [D ] CERTCLI.DLL 08/04/2004 6:00a 08/04/2004 1:56a 194,560 A 0x00032892 0x00032892 x86 Console CV 0x77B90000 Unknown 0x00032000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.10 [D ] CFGMGR32.DLL 08/04/2004 6:00a 08/04/2004 1:56a 16,896 A 0x0000593F 0x0000593F x86 GUI CV 0x74AE0000 Unknown 0x00007000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] CLUSAPI.DLL 08/04/2004 6:00a 08/04/2004 1:56a 57,856 A 0x0001C6F8 0x0001C6F8 x86 Console CV 0x76D10000 Unknown 0x00011000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] CREDUI.DLL 08/04/2004 6:00a 08/04/2004 1:56a 163,840 A 0x0002962D 0x0002962D x86 Console CV 0x76C00000 Unknown 0x0002E000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.10 [D ] CRYPT32.DLL 08/04/2004 6:00a 08/04/2004 1:56a 597,504 A 0x00096491 0x00096491 x86 GUI CV 0x77A80000 Unknown 0x00094000 Not Loaded 5.131.2600.2180 5.131.2600.2180 5.1 7.10 5.1 4.0 [D ] CRYPTUI.DLL 08/04/2004 6:00a 08/04/2004 1:56a 512,512 A 0x0008752B 0x0008752B x86 GUI CV 0x754D0000 Unknown 0x00080000 Not Loaded 5.131.2600.2180 5.131.2600.2180 5.1 7.10 5.1 4.0 [D ] CSCDLL.DLL 08/04/2004 6:00a 08/04/2004 1:56a 101,888 A 0x0001B3B4 0x0001B3B4 x86 Console CV 0x76600000 Unknown 0x0001D000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.10 [D ] DBGHELP.DLL 08/04/2004 6:00a 08/04/2004 1:56a 640,000 A 0x000A8824 0x000A8824 x86 Console CV 0x59A60000 Unknown 0x000A1000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] DEVMGR.DLL 08/04/2004 6:00a 08/04/2004 1:56a 282,624 A 0x00048DEA 0x00048DEA x86 GUI CV 0x72A90000 Unknown 0x00048000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] DHCPCSVC.DLL 05/19/2006 6:59a 05/19/2006 6:59a 111,616 A 0x00027E80 0x00027E80 x86 Console CV 0x76D80000 Unknown 0x0001E000 Not Loaded 5.1.2600.2912 5.1.2600.2912 5.1 7.10 5.1 4.0 [D ] DNSAPI.DLL 06/26/2006 11:37a 06/26/2006 11:37a 148,480 A 0x00030427 0x00030427 x86 Console CV 0x76F20000 Unknown 0x00027000 Not Loaded 5.1.2600.2938 5.1.2600.2938 5.1 7.10 5.1 4.0 [D ] DUSER.DLL 08/04/2004 6:00a 08/04/2004 1:56a 304,128 A 0x0004D63E 0x0004D63E x86 GUI CV 0x6C1B0000 Unknown 0x0004D000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] ESENT.DLL 10/20/2005 4:20p 10/20/2005 4:20p 1,082,368 A 0x0010A9CC 0x0010A9CC x86 Console CV 0x606B0000 Unknown 0x0010D000 Not Loaded 5.1.2600.2780 5.1.2600.2780 5.1 7.10 5.1 4.10 [D ] GDIPLUS.DLL 08/04/2004 6:00a 08/04/2004 1:55a 1,712,128 A 0x001AF36F 0x001AF36F x86 Console CV 0x4EC50000 Unknown 0x001A3000 Not Loaded 5.1.3102.2180 5.1.3102.2180 5.1 7.10 5.1 4.0 [D ] HLINK.DLL 07/21/2006 2:24a 07/21/2006 2:24a 72,704 A 0x00013BF8 0x00013BF8 x86 Console CV 0x76820000 Unknown 0x00015000 Not Loaded 5.2.3790.2748 5.2.3790.2748 5.2 7.10 5.2 4.10 [D ] HNETCFG.DLL 08/04/2004 6:00a 08/04/2004 1:56a 344,064 A 0x00057FCB 0x00057FCB x86 GUI CV 0x662B0000 Unknown 0x00058000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] IMAGEHLP.DLL 08/04/2004 6:00a 08/04/2004 1:56a 144,384 A 0x0002E238 0x0002E238 x86 Console CV 0x76C90000 Unknown 0x00028000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] IMGUTIL.DLL 08/04/2004 6:00a 08/04/2004 1:56a 35,840 A 0x0000E8D2 0x0000E8D2 x86 GUI CV 0x66880000 Unknown 0x0000C000 Not Loaded 6.0.2900.2180 6.0.2900.2180 5.1 7.10 5.1 4.0 [D ] INETCOMM.DLL 07/27/2006 7:24a 07/27/2006 7:24a 679,424 A 0x000AF27B 0x000AF27B x86 GUI CV 0x76150000 Unknown 0x000AA000 Not Loaded 6.0.2900.2962 6.0.2900.2962 5.1 7.10 5.1 4.0 [D ] IPHLPAPI.DLL 05/19/2006 6:59a 05/19/2006 6:59a 94,720 A 0x0001A172 0x0001A172 x86 Console CV 0x76D60000 Unknown 0x00019000 Not Loaded 5.1.2600.2912 5.1.2600.2912 5.1 7.10 5.1 4.10 [D ] LINKINFO.DLL 08/31/2005 7:41p 08/31/2005 7:41p 19,968 A 0x000129A7 0x000129A7 x86 GUI CV 0x76980000 Unknown 0x00008000 Not Loaded 5.1.2600.2751 5.1.2600.2751 5.1 7.10 5.1 4.0 [D ] LZ32.DLL 08/04/2004 6:00a 08/17/2001 11:33p 2,560 A 0x0000851D 0x0000851D x86 Console PDB 0x73DC0000 Unknown 0x00003000 Not Loaded 5.1.2600.0 5.1.2600.0 5.1 7.0 5.1 5.1 [D ] MLANG.DLL 08/04/2004 6:00a 08/04/2004 1:56a 586,240 A 0x00096070 0x00096070 x86 GUI CV 0x75CF0000 Unknown 0x00091000 Not Loaded 6.0.2900.2180 6.0.2900.2180 5.1 7.10 5.1 4.0 [D ] MOBSYNC.DLL 08/04/2004 6:00a 08/04/2004 1:56a 207,360 A 0x0003B35B 0x0003B35B x86 Console CV 0x61680000 Unknown 0x00036000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] MPRAPI.DLL 08/04/2004 6:00a 08/04/2004 1:56a 87,040 A 0x0001D240 0x0001D240 x86 Console CV 0x76D40000 Unknown 0x00018000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.10 [D ] MPRUI.DLL 08/04/2004 6:00a 08/17/2001 11:33p 47,104 A 0x00012017 0x00012017 x86 Console PDB 0x71B00000 Unknown 0x0000F000 Not Loaded 5.1.2600.0 5.1.2600.0 5.1 7.0 5.1 4.10 [D ] MSASN1.DLL 08/04/2004 6:00a 08/04/2004 1:57a 57,344 A 0x000116AD 0x000116AD x86 GUI CV 0x77B20000 Unknown 0x00012000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] MSGINA.DLL 08/04/2004 6:00a 08/04/2004 1:58a 994,304 A 0x000F434B 0x000F434B x86 Console CV 0x75970000 Unknown 0x000F7000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.10 [D ] MSHTML.DLL 07/28/2006 5:28a 07/28/2006 5:28a 3,054,080 A 0x002EF20B 0x002EF20B x86 GUI CV 0x7DC30000 Unknown 0x002F0000 Not Loaded 6.0.2900.2963 6.0.2900.2963 5.1 7.10 5.1 4.0 [D ] MSI.DLL 05/04/2005 1:45p 05/02/2005 9:51a 2,890,240 A 0x002C74DB 0x002C74DB x86 Console CV 0x745E0000 Unknown 0x002C6000 Not Loaded 3.1.4000.2435 3.1.4000.2435 5.2 7.10 5.2 4.10 [D ] MSIMG32.DLL 08/04/2004 6:00a 08/04/2004 1:58a 4,608 A 0x00005405 0x00005405 x86 Console CV 0x76380000 Unknown 0x00005000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.10 [D ] MSLS31.DLL 08/04/2004 6:00a 08/17/2001 11:33p 146,432 A 0x00026DB1 0x00026DB1 x86 GUI PDB 0x746C0000 Unknown 0x00027000 Not Loaded 3.10.349.0 3.10.0.0 5.1 7.0 5.1 4.0 [D ] MSOERT2.DLL 08/04/2004 6:00a 08/04/2004 1:58a 105,984 A 0x0001C294 0x0001C294 x86 GUI CV 0x76880000 Unknown 0x00022000 Not Loaded 6.0.2900.2180 6.0.2900.2180 5.1 7.10 5.1 4.0 [D ] MSRATING.DLL 06/23/2006 5:02a 06/23/2006 5:02a 146,432 A 0x0002C20D 0x0002C20D x86 GUI CV 0x5FF20000 Unknown 0x00026000 Not Loaded 6.0.2900.2937 6.0.2900.2937 5.1 7.10 5.1 4.0 [D ] MSSIGN32.DLL 08/04/2004 6:00a 08/17/2001 11:33p 35,840 A 0x0000A28B 0x0000A28B x86 GUI PDB 0x720E0000 Unknown 0x0000B000 Not Loaded 5.131.2600.0 5.131.2600.0 5.1 7.0 5.1 4.0 [D ] MSVCP60.DLL 08/04/2004 6:00a 08/04/2004 1:59a 413,696 0x00069ACE 0x00069ACE x86 GUI CV 0x76080000 Unknown 0x00065000 Not Loaded 6.2.3104.0 6.2.3104.0 0.0 7.10 4.0 4.0 [D ] MSWSOCK.DLL 08/04/2004 6:00a 08/04/2004 1:59a 245,248 A 0x00047A3C 0x00047A3C x86 Console CV 0x71A50000 Unknown 0x0003F000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.10 [D ] NETAPI32.DLL 07/14/2006 9:31a 07/14/2006 9:31a 332,288 A 0x00059F41 0x00059F41 x86 Console CV 0x5B860000 Unknown 0x00054000 Not Loaded 5.1.2600.2952 5.1.2600.2952 5.1 7.10 5.1 4.0 [D ] NETCFGX.DLL 08/04/2004 6:00a 08/04/2004 1:56a 622,080 A 0x000A1647 0x000A1647 x86 GUI CV 0x755F0000 Unknown 0x0009A000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] NETMAN.DLL 08/22/2005 12:29p 08/22/2005 12:29p 197,632 A 0x0003DF4D 0x0003DF4D x86 GUI CV 0x77D00000 Unknown 0x00033000 Not Loaded 5.1.2600.2743 5.1.2600.2743 5.1 7.10 5.1 4.0 [D ] NETPLWIZ.DLL 08/04/2004 6:00a 08/04/2004 1:56a 875,008 A 0x000E0A05 0x000E0A05 x86 GUI CV 0x5F560000 Unknown 0x000DA000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.10 [D ] NETRAP.DLL 08/04/2004 6:00a 08/04/2004 1:56a 12,288 A 0x0001157D 0x0001157D x86 Console CV 0x71C80000 Unknown 0x00007000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.10 [D ] NETSHELL.DLL 08/04/2004 6:00a 08/04/2004 1:56a 1,708,032 A 0x001B04EC 0x001B04EC x86 GUI CV 0x76400000 Unknown 0x001A6000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] NETUI0.DLL 08/04/2004 6:00a 08/04/2004 1:56a 80,896 A 0x00015BF8 0x00015BF8 x86 GUI CV 0x71CD0000 Unknown 0x00017000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] NETUI1.DLL 08/04/2004 6:00a 08/04/2004 1:56a 245,760 A 0x0003F9E9 0x0003F9E9 x86 GUI CV 0x71C90000 Unknown 0x00040000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] NETUI2.DLL 08/04/2004 6:00a 08/17/2001 11:33p 308,224 A 0x000583E4 0x000583E4 x86 GUI PDB 0x71BA0000 Unknown 0x0004E000 Not Loaded 5.1.2600.0 5.1.2600.0 5.1 7.0 5.1 4.0 [D ] NTDSAPI.DLL 08/04/2004 6:00a 08/04/2004 1:56a 67,072 A 0x00019F76 0x00019F76 x86 Console CV 0x767A0000 Unknown 0x00013000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.10 [D ] NTLANMAN.DLL 08/04/2004 6:00a 08/04/2004 1:57a 43,520 A 0x0000FB11 0x0000FB11 x86 GUI CV 0x71C10000 Unknown 0x0000E000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] ODBC32.DLL 08/04/2004 6:00a 08/04/2004 1:57a 249,856 A 0x0004002F 0x0004002F x86 GUI CV 0x74320000 Unknown 0x0003D000 Not Loaded 3.525.1117.0 3.525.1117.0 5.1 7.10 5.1 4.0 [D ] OLEACC.DLL 08/04/2004 6:00a 08/17/2001 11:33p 163,328 A 0x000349E5 0x000349E5 x86 GUI PDB 0x74C80000 Unknown 0x0002C000 Not Loaded 4.2.5406.0 5.1.2600.0 5.1 7.0 5.1 4.0 [D ] OLEAUT32.DLL 08/04/2004 6:00a 08/04/2004 1:57a 553,472 0x00096957 0x00096957 x86 Console CV 0x77120000 Unknown 0x0008C000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.10 [D ] POWRPROF.DLL 08/04/2004 6:00a 08/04/2004 1:56a 17,408 A 0x00012759 0x00012759 x86 GUI CV 0x74AD0000 Unknown 0x00008000 Not Loaded 6.0.2900.2180 6.0.2900.2180 5.1 7.10 5.1 4.10 [D ] PRINTUI.DLL 08/04/2004 6:00a 08/04/2004 1:56a 560,640 A 0x00094A98 0x00094A98 x86 Console CV 0x74B80000 Unknown 0x0008C000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.10 [D ] PSAPI.DLL 08/04/2004 6:00a 08/04/2004 1:56a 23,040 A 0x0000A29B 0x0000A29B x86 Console CV 0x76BF0000 Unknown 0x0000B000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] QUERY.DLL 06/21/2006 11:06p 06/21/2006 11:06p 1,435,648 A 0x001681C7 0x001681C7 x86 GUI CV 0x7D9A0000 Unknown 0x00165000 Not Loaded 5.1.2600.2935 5.1.2600.2935 5.1 7.10 5.1 5.0 [D ] RASAPI32.DLL 08/04/2004 6:00a 08/04/2004 1:56a 236,544 A 0x00041A56 0x00041A56 x86 GUI CV 0x76EE0000 Unknown 0x0003C000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] RASDLG.DLL 08/04/2004 6:00a 08/04/2004 1:56a 657,920 A 0x000A957F 0x000A957F x86 Console CV 0x768D0000 Unknown 0x000A4000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.10 [D ] RASMAN.DLL 08/04/2004 6:00a 08/04/2004 1:56a 61,440 A 0x0001A747 0x0001A747 x86 GUI CV 0x76E90000 Unknown 0x00012000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] REGAPI.DLL 08/04/2004 6:00a 08/04/2004 1:56a 49,664 A 0x0001BE2B 0x0001BE2B x86 Console CV 0x76BC0000 Unknown 0x0000F000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.10 [D ] RTUTILS.DLL 08/04/2004 6:00a 08/04/2004 1:56a 44,032 A 0x000121E6 0x000121E6 x86 Console CV 0x76E80000 Unknown 0x0000E000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.10 [D ] SAMLIB.DLL 08/04/2004 6:00a 08/04/2004 1:56a 64,000 A 0x00019C51 0x00019C51 x86 Console CV 0x71BF0000 Unknown 0x00013000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] SCECLI.DLL 08/04/2004 6:00a 08/04/2004 1:56a 180,224 A 0x00032B1D 0x00032B1D x86 Console CV 0x74410000 Unknown 0x0002E000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] SECUR32.DLL 08/04/2004 6:00a 08/04/2004 1:56a 55,808 A 0x0001A281 0x0001A281 x86 Console CV 0x77FE0000 Unknown 0x00011000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] SETUPAPI.DLL 08/04/2004 6:00a 08/04/2004 1:56a 983,552 A 0x000F596B 0x000F596B x86 GUI CV 0x77920000 Unknown 0x000F3000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] SHDOCVW.DLL 06/23/2006 5:02a 06/23/2006 5:02a 1,494,016 A 0x00177137 0x00177137 x86 GUI CV 0x77760000 Unknown 0x0016F000 Not Loaded 6.0.2900.2937 6.0.2900.2937 5.1 7.10 5.1 4.0 [D ] SHSVCS.DLL 08/04/2004 6:00a 08/04/2004 1:56a 134,656 A 0x00025718 0x00025718 x86 GUI CV 0x776E0000 Unknown 0x00023000 Not Loaded 6.0.2900.2180 6.0.2900.2180 5.1 7.10 5.1 4.10 [D ] TAPI32.DLL 08/04/2004 6:00a 08/04/2004 1:56a 181,760 A 0x0003736D 0x0003736D x86 GUI CV 0x76EB0000 Unknown 0x0002F000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] URLMON.DLL 07/25/2006 2:33p 07/25/2006 2:33p 613,888 A 0x0009FD7E 0x0009FD7E x86 GUI CV 0x77260000 Unknown 0x000A0000 Not Loaded 6.0.2900.2960 6.0.2900.2960 5.1 7.10 5.1 4.0 [D ] USERENV.DLL 08/04/2004 6:00a 08/04/2004 1:56a 723,456 A 0x000B67EA 0x000B67EA x86 GUI CV 0x769C0000 Unknown 0x000B3000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] USP10.DLL 08/04/2004 6:00a 08/04/2004 1:56a 406,528 A 0x000656C9 0x000656C9 x86 GUI CV 0x74D90000 Unknown 0x0006B000 Not Loaded 1.420.2600.2180 1.420.2600.2180 5.1 7.10 5.1 4.0 [D ] UTILDLL.DLL 08/04/2004 6:00a 08/17/2001 11:36p 25,600 A 0x0000DD91 0x0000DD91 x86 Console PDB 0x5ADB0000 Unknown 0x0000A000 Not Loaded 5.1.2600.0 5.1.2600.0 5.1 7.0 5.1 4.0 [D ] UXTHEME.DLL 08/04/2004 6:00a 08/04/2004 1:56a 218,624 A 0x0003E638 0x0003E638 x86 GUI CV 0x5AD70000 Unknown 0x00038000 Not Loaded 6.0.2900.2180 6.0.2900.2180 5.1 7.10 5.1 4.10 [D ] VERSION.DLL 08/04/2004 6:00a 08/04/2004 1:56a 18,944 A 0x00011D78 0x00011D78 x86 GUI CV 0x77C00000 Unknown 0x00008000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] W32TOPL.DLL 08/04/2004 6:00a 08/17/2001 11:33p 22,016 A 0x00014769 0x00014769 x86 Console PDB 0x71F40000 Unknown 0x00009000 Not Loaded 5.1.2600.0 5.1.2600.0 5.1 7.0 5.1 4.10 [D ] WINHTTP.DLL 08/04/2004 6:00a 08/04/2004 1:57a 351,232 A 0x00055D26 0x00055D26 x86 GUI CV 0x4D4F0000 Unknown 0x00058000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] WININET.DLL 06/23/2006 5:02a 06/23/2006 5:02a 658,944 A 0x000A39D9 0x000A39D9 x86 GUI CV 0x771B0000 Unknown 0x000A6000 Not Loaded 6.0.2900.2937 6.0.2900.2937 5.1 7.10 5.1 4.0 [D ] WINMM.DLL 08/04/2004 6:00a 08/04/2004 1:57a 176,128 A 0x0002ED0A 0x0002ED0A x86 GUI CV 0x76B40000 Unknown 0x0002D000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] WINSCARD.DLL 08/04/2004 6:00a 08/04/2004 1:56a 99,328 A 0x000215C4 0x000215C4 x86 Console CV 0x723D0000 Unknown 0x0001C000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.10 [D ] WINSPOOL.DRV 08/04/2004 6:00a 08/04/2004 1:56a 146,432 A 0x0002A147 0x0002A147 x86 GUI CV 0x73000000 Unknown 0x00026000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] WINSTA.DLL 08/04/2004 6:00a 08/04/2004 1:56a 53,760 A 0x00014D19 0x00014D19 x86 Console CV 0x76360000 Unknown 0x00010000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.10 [D ] WINTRUST.DLL 08/04/2004 6:00a 08/04/2004 1:56a 176,640 A 0x0003069E 0x0003069E x86 GUI CV 0x76C30000 Unknown 0x0002E000 Not Loaded 5.131.2600.2180 5.131.2600.2180 5.1 7.10 5.1 4.0 [D ] WLDAP32.DLL 08/04/2004 6:00a 08/04/2004 1:56a 172,032 A 0x0003811E 0x0003811E x86 GUI CV 0x76F60000 Unknown 0x0002C000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] WMI.DLL 08/04/2004 6:00a 08/04/2004 1:56a 5,632 A 0x0000EAA5 0x0000EAA5 x86 GUI CV 0x76D30000 Unknown 0x00004000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] WTSAPI32.DLL 08/04/2004 6:00a 08/04/2004 1:57a 18,432 A 0x00008C06 0x00008C06 x86 Console CV 0x76F50000 Unknown 0x00008000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.10 [D ] WZCDLG.DLL 08/04/2004 6:00a 08/04/2004 1:57a 378,368 A 0x000654B5 0x000654B5 x86 GUI CV 0x5DF10000 Unknown 0x0005E000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.0 [D ] WZCSAPI.DLL 08/04/2004 6:00a 08/04/2004 1:57a 51,712 A 0x0000E183 0x0000E183 x86 Console CV 0x73030000 Unknown 0x00010000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.10 [D ] WZCSVC.DLL 08/04/2004 6:00a 08/04/2004 1:57a 359,936 A 0x0005FD08 0x0005FD08 x86 Console CV 0x77620000 Unknown 0x0006E000 Not Loaded 5.1.2600.2180 5.1.2600.2180 5.1 7.10 5.1 4.10 ************************************| Log |************************************* Warning: At least one delay-load dependency module was not found. Warning: At least one module has an unresolved import due to a missing export function in a delay-load dependent module.

1 0

ANNOUNCE 1.3.3.5
by Plinnell 10 Nov '06

10 Nov '06

The Scribus Team is pleased to announce the release of Scribus 1.3.3.5 This release is purely a further bug fix release to the recently released 1.3.3.4. In particular, there are more SVG import and rendering fixes, including enhancements to imported text from SVG. There were fixes and improvements in the Story Editor, Undo/Redo and UI translation updates including new Greek and Bretion translations. Some PDF and PSD import improvements were backported from 1.3.4. Scribus now *requires* libtiff and the littlecms libraries. --- With the announcement of 1.3.3.5, the team is officially announcing there will be no more development or bug fixes to 1.2.x series. We now recommend all distributions package 1.3.3.5+ from now on. The Scribus team has announced previously there there will be substantial core code changes in the next 1.3.4 and 1.3.5 releases, so the team has branched 1.3.3 to provide a stable usable version. The upcoming 1.3.4 version will include a completely rewritten text layout engine for more refined glyph and text layout, along with a host of new features including advanced transparency support, image effects and more. The team has decided to migrate QT 4.2.x for version 1.3.5. --- A special thanks to members of the OpenBSD team for working with us to solve some of the issues fixed with this release. The Scribus Team would also like to thank - Anduin.net/Øverby Consulting and Cardia AS for their continued hosting of all of the Scribus websites. The Scribus Team would also like to thank the many end users, translators, testers and contributors who helped us with this release.

1 0

new screenshots
by bulia byak 10 Nov '06

10 Nov '06

Those without an SVN build of Inkscape are invited to visit the recently updated gallery of 0.45 screenshots: http://inkscape.org/screenshots/ The exhibits demonstrate the two photorealistic car renditions, a demo of the proposed gradient mesh approach, and a mini-tutorial on creating life-like shading for arbitrary rope-like shapes. All examples use Gaussian blur, and the source files of all examples are in share/examples in SVN. Enjoy! -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org

2 2

Help Wanted
by Aaron Spike 10 Nov '06

10 Nov '06

How would we as a community feel about posting some of the more important todo tasks or good entry level tasks on the inkscape.org news? Aaron

2 1

Autopackage: error while loading shared libraries: libssl.so.0.9.8
by Jochem Liem 10 Nov '06

10 Nov '06

Dear developers, I first tried installing inkscape-0.44.1.x86.WONKY.package, but this gave libpng and c-library problems. I installed inkscape200611051452.package, which solves the above problems, but gives the following error: [jliem@...1558... Desktop]$ /scratch/LinuxPrograms/bin/inkscape & [1] 31989 [jliem@...1558... Desktop]$ /scratch/LinuxPrograms/bin/.proxy.inkscape: error while loading shared libraries: libssl.so.0.9.8: cannot open shared object file: No such file or directory [1]+ Exit 127 /scratch/LinuxPrograms/bin/inkscape [jliem@...1558... Desktop]$ Is this a bug in the installer, or can I correct this myself (without a root account)? Best regards, Jochem -- =-=-=-=-=-=-=-=-=-=-=-=-=-= Jochem Liem =-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Work: Home: Human Computer Studies Laboratory Zuiderkerkstraat 3 Informatics Institute 1501 NE, Zaandam Faculty of Science The Netherlands University of Amsterdam Kruislaan 419, Matrix I, Room 2.25 jliem@...1557... 1098 VA, Amsterdam, The Netherlands http://www.science.uva.nl/~jliem/ Phone: +31 (0)20 8884 666 (work) Phone: +31 (0)75 6122 972 (home) Fax: +31 (0)20 525 6896 (work) Mobile: +31 (0)6 4321 9992 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

2 1

Adobe PDF and XML, introducing Mars. Nota Bene: it uses SVG!
by Alan Horkan 09 Nov '06

09 Nov '06

Adobe have announced a project for representing PDF in XML called Mars. They have also announced a project to cooperate with Mozilla on a shared ECMAScipt project codenamed Apollo. (Javascript is formally known as ECMA Script, Adobe/Macromedia has long had a version called Actionscript but I still like the original name Livescript best.) Not so relevant to inkscape at the moment. It also sounds vaguely like they are going to use Webkit (KHTML) but that has even less relevance to Inkscape. The interesting part of all this project Mars relevant to Inkscape can be found buried in the Frequently Asked Questions: http://labs.adobe.com/wiki/index.php/Mars:FAQ#What_advantages_does_SVG_brin… "SVG is an abbreviation for Scalable Vector Graphics, an XML-based, W3C standard language for describing graphics. Many applications and tools can create or manipulate SVG page contents. SVG page content can also be converted to PDF graphic operators using Acrobat 8.0 Professional and the Mars plug-in." I'd love to give you more details but so far I only know as much as can be seen in the FAQ. http://labs.adobe.com/wiki/index.php/Mars:FAQ Looks promising. You might even say it was pretty cool. Sincerely Alan Horkan Inkscape http://inkscape.org Abiword http://www.abisource.com Open Clip Art http://OpenClipArt.org Alan's Diary http://advogato.org/person/AlanHorkan/ P.S. I know I should probably add this to the Wiki and I probably will eventually but I welcome the help of anyone who wants to do it first or even find better information.

2 1