- Inkscape Devel - Inkscape Mailman

Survey: Relevance of Configuration Systems in Free and Open Source Software
by Gabriel Rauter 14 Jun '16

14 Jun '16

Dear developers, contributors and caretakers of free and open source software. If you are involved in the development of free and open source software (FLOSS) you are the person we are looking for. It would be a great help if you take this survey: http://elektra.limequery.org/625192 It will be available till 18.07.2016 (anywhere on earth). For every thoroughly and not anonymously finished survey € 40 cent will be donated to one of the following organizations of your choice: For every thoroughly and not anonymously finished survey € 40 (at least € 200 in total) cent will be donated. The donation goes to one organisation of your choice. You need to enter your e-mail address to participate. Then you can select between following projects: - LimeSurvey (LimeService, kindly hosts this survey) - SPI (General Donation: 0 A.D., LibreOffice, Debian, ArchLinux, …) - FSFE - GNOME - KDE - Mozilla (Firefox) - Wikimedia Foundation (Wikipedia) So if you know anyone suited for this survey please feel free to share it. As part of the ongoing research on the topic of configuration systems in free and open source software here at Vienna University of Technology, we would like to invite you to participate in this short survey. It should only take you 15 minutes, promised! By supporting us through this survey, you help the research by providing relevant input on this topic. In addition the anonymised results will be released under an open licence, so other projects with involvement in configuration in free and open source software can benefit from it too. In addition the results will be anonymised and made freely available. Just leave your address at the end of the survey and we will send it to you. For further questions regarding this survey or interest in the research of configuration systems feel free to contact as atsurvey@...3407... If you have not done it yet, we would appreciate if you take our survey at http://elektra.limequery.org/625192 before the 18.07.2016.

2 2

Re: [Inkscape-devel] possibly strange question (snap)
by unknown＠example.com 14 Jun '16

14 Jun '16

Just two notes: - Spacebar switches to selection tool (toggles back and forth between current and selector), so the key is not free. - There are expert users at inkscapeforum.com who routinely recommend turning off snapping to gain speed improvements, so there is probably something to it (I never noticed anything, but my drawings are not very complex usually). (but the requested feature sounds enormously useful, especially for toggling through nodes that are placed (almost) directly above each other) Regards, Maren > Would these, either Spacebar or Enter key, be customizable, using Inkscape Preferences? > > Thanks, > brynn > > ______________________________________________________ > > From: C R > Sent: Monday, June 13, 2016 9:06 AM > To: Brynn > Cc: Olof Bjarnason ; LucaDC ; inkscape-devel > Subject: Re: [Inkscape-devel] possibly strange question (snap) > > > Olof and I discussed also using the Enter key as a toggle for selecting the > node to avoid having to click as much. This key is also free from bindings in the Node Tool, and makes an intuitive natural key for > selecting/deselecting. As an alternative, I'd suggest the spacebar (which can be used on websites for toggling radio buttons/checkboxes), but I fear a > clash with grabbing the view to drag, which I also dearly love. :) It's possible that it's not too much of a clash, as it's tapping vs holding. > > > > > -C > > > On Mon, Jun 13, 2016 at 2:53 PM, Brynn <brynn@...3133...> wrote: > > Yes, I watched his video :-) > > If we weren't in the middle of a release cycle, it would be nice to discuss > the mouse snapping or maybe called pointer snapping. But Olof tells me the > snapping is super heavy in the program. > > And I would be happy with either of your solutions :-) > > Thanks, > brynn > _____________________________________________ > From: C R > Sent: Monday, June 13, 2016 4:19 AM > To: Brynn > Cc: Olof Bjarnason ; LucaDC ; inkscape-devel > > Subject: Re: [Inkscape-devel] possibly strange question (snap) > > > Clicking and dragging selects every node the circle touches, as if you were > painting the selection. The distance is controlled by the bounds of the circle, which is better, since you can control the radius as shown, with the > mouse wheel for extra precision. > > > Olof's selection tool is better for instances where nodes are very close together though (make sure you watch his video): > https://youtu.be/dy3YQWLBb4Y > > > > Both would be awesome to have, but I think Olof is right about the complexity of the paint select tool being hard to impliment vs his very nice, and tidy solution, which may work better for your case anyway. :) > > > -C > > > > On Mon, Jun 13, 2016 at 9:37 AM, Brynn <brynn@...3133...> wrote: > > Hi C R, > From my simple user's perspective, that seems like it should help. > But > the optional distance setting would need to be closer than Inks Prefs dialog > (and not require a restart, like grab sensitivity). > Between the brush idea and the key stroke idea, it seems like they > are > very similar. Either way, it's the area around the mouse pointer where the > node is selected. So it seems like the "brush" select would be more fluid. > But how would it be enabled? Do you click to grab the node, or does just touching it with the "brush" select it? This seems very similar to the lasso select which was mentioned earlier in this thread. If the lasso could > be made to work with the Node tool (in all systems), then maybe you could just add the "brush" to it? (Of course, keeping in mind my non-technical perspective, hah.) > Thanks for everyone's interest in this :-) > > All best, > brynn > ________________________________________________ > From: C R > Sent: Monday, June 13, 2016 12:54 AM > > To: Brynn > Cc: LucaDC ; inkscape-devel > Subject: Re: [Inkscape-devel] possibly strange question (snap) > > > See this quick video capture for Blender paint-select feature: > https://www.dropbox.com/s/r38x7q9yjdjggdl/paint_select_blender_demo.mp4?dl=0 > > > > As you can, see it's faster and more convenient than anything we've discussed so far. Precision can be changed on the fly. > Their implementation requires you to commit the selection with the Escape button, but I don't think this is necessary. > > > In short, we could do this, but better. > > > -C > > > > > On Mon, Jun 13, 2016 at 12:47 AM, Brynn <brynn@...3133...> wrote: > > That sounds helpful too. I would have to try it first, before I know if it > helps with my particular problem. > > It sounds like it essentially makes the pointer bigger? > > Isn't that similar to what the Grab Sensitivity does? While it doesn't affect the Node tool, I've tried with the Selection tool. It works great if the objects on the canvas are far enough apart. But on a crowded canvas, > it seems to want to select objects next to the one I want to select. I guess Inkscape can't read my mind, and know which object I want. > > I wonder if it would be the same case with the node pointer? > > All best, > brynn > > _____________________________________________ > From: C R > Sent: Friday, June 10, 2016 1:46 PM > To: Brynn > Cc: LucaDC ; inkscape-devel > > Subject: Re: [Inkscape-devel] possibly strange question (snap) > > > Blender has a nice solution to the problem of clicking/selecting small nodes. > > > If you press "c" it turns the mouse pointer into a circle. You can adjust the size of this circle with the mouse-wheel, and just paint over the nodes > you want to select with it. press escape when done to exit the selection mode. though we could just as easily use the enter key which may be more intuitive. > > > On Tue, Jun 7, 2016 at 3:48 PM, Brynn <brynn@...3133...> wrote: > > Ok, thanks Luca. > > Fyi to everyone, Olof is helping make a better and more clear presentation of the situation and request. Just take me a little time to learn how to make a video (which I should have done years ago). > > Thanks again, > brynn > > -------------------------------------------------- > From: "LucaDC" <dicappello@...2144...> > Sent: Tuesday, June 07, 2016 2:59 AM > To: <inkscape-devel(a)lists.sourceforge.net> > Subject: Re: [Inkscape-devel] possibly strange question (snap) > > > > Brynn wrote > > (That would be the first use I've ever found for mouse position values in the bottom-right corner, that shows the position of the mouse. If you're working in a file where measurement needs to be precise, you can place your > mouse on the precise coordinates.) > > > This could hardly be called a precise positioning as the displayed coordinates are rounded and their definition depends on the zoom level. What > you get depends on the discretization of your monitor's pixels coordinates translated into document's coordinates. > A better way to achieve a precise positioning is using guides: drag out a guide, open its dialog to set its coordinates and snap to its origin whatever you want to be exactly there. > > Luca > > > > > -- > View this message in context: > http://inkscape.13.x6.nabble.com/possibly-strange-question-snap-tp4976904p4… Sent from the Inkscape - Dev mailing list archive at Nabble.com. > > ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic > patterns at an interface-level. Reveals which users, apps, and protocols are > consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________ > Inkscape-devel mailing list > Inkscape-devel(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/inkscape-devel > > > > ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic > patterns at an interface-level. Reveals which users, apps, and protocols are > consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________ > Inkscape-devel mailing list > Inkscape-devel(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/inkscape-devel > > > ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic > patterns at an interface-level. Reveals which users, apps, and protocols are > consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________ > Inkscape-devel mailing list > Inkscape-devel(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/inkscape-devel >

3 5

Re: [Inkscape-devel] Style dialog
by Kamalpreet Grewal 14 Jun '16

14 Jun '16

On Mon, Jun 13, 2016 at 1:50 PM, Tavmjong Bah <tavmjong@...8...> wrote: > > First, while allowed in SVG, most people would expect only one <style> > element in an SVG, usually near the top. I'm not sure that Inkscape's > ability to properly handle more than one internal style sheet has been > properly tested (it does seem to work). Will the SVG have only one style element at the top as you mentioned? This style element will have multiple selectors in it. Can one style element have multiple selectors? Other way could be like I am doing currently, adding a new style element whenever a new style element is selected. In this case, there will be one selector for each style element. Which one should be adopted for Inkscape? -- Kamalpreet Kaur Grewal Blog: http://kamalpreetgrewal.com/

2 1

possibly strange question (snap)
by Brynn 14 Jun '16

14 Jun '16

Hi Friends, I just was wondering something. Keeping in mind, as many of you know, I'm not very technically oriented. So this could be totally impossible. But it seems like it might be, and I guess it can't hurt to ask. I'm often doing a lot of node editing, and often snapping nodes to a pixel grid. The part that slows me down the most is positioning the mouse pointer precisely over a node, to be able to click it (select it) or move it. Would there be any way to give Inkscape an optional feature that would snap the mouse to something - like have it snap to nodes or handles? I mean, snap the mouse pointer that is not dragging something yet. The snap of the mouse would have to be disabled by the selection click, I guess, so that you could move the node. Well maybe there's a better way to accomplish this? Since recent versions (I think 0.91 is when I first noticed it) you can make the nodes and handles larger. But I find that blocks the drawing too much. I've also tried making the Grab Sensitivity bigger. But that doesn't seem to affect selecting nodes. And yes, I definitely drag a selection box, when possible. But often it's not possible. Of course I would be open to other ways, to make selecting individual nodes easier. But I thought I'd ask if it's possible. It seems like it ought to be possible. Actually, this could help people who don't have very good mouse control, to be able to use Inkscape easier. Oh! And it would be totally awesome for the mouse to be able to snap to a guide, because those puppies can be so frustrating to grab sometimes. Maybe such a feature would come under the heading of accessibility? Thank you very much, brynn

7 32

Re: [Inkscape-devel] possibly strange question (snap)
by Olof Bjarnason 14 Jun '16

14 Jun '16

On 14 Jun 2016 07:35, "C R" <cajhne@...400...> wrote: >> >> - Spacebar switches to selection tool (toggles back and forth between >> current and selector), so the key is not free. > > > While technically correct, this function tosses out the selection data when it switches, so it's another area where we may want to either improve the functionality by saving the last selected node state between tools-shifts, or overwrite it in the Node Tool context with something better suited to the Node editor (which also functions as a selector, just on a different level). > > >> >> - There are expert users at inkscapeforum.com who routinely recommend >> turning off snapping to gain speed improvements, so there is probably >> something to it (I never noticed anything, but my drawings are not very >> complex usually). > > > Yes, however as noted, this situation is far simpler of a calculation than the snapping dialog generates, so I recommend trying the enhancement before we make any judgements about pre-judgements about performance. The fact remains, it would be great to see what you are about to select in real-time (or as close as possible). While I agree in general with your remarks C R, having tried out the feature awhile last night, the ability to toggle selection nodes heavily improves the situation -- If you select the wrong node just toggle it and continue the selection process. What I mean is the feature is quite useful even without visual hint of what would be selected. > > -C > >> (but the requested feature sounds enormously useful, especially for >> toggling through nodes that are placed (almost) directly above each other) >> >> Regards, >> Maren >> >> > Would these, either Spacebar or Enter key, be customizable, using >> Inkscape Preferences? >> > >> > Thanks, >> > brynn >> > >> > ______________________________________________________ >> > >> > From: C R >> > Sent: Monday, June 13, 2016 9:06 AM >> > To: Brynn >> > Cc: Olof Bjarnason ; LucaDC ; inkscape-devel >> > Subject: Re: [Inkscape-devel] possibly strange question (snap) >> > >> > >> > Olof and I discussed also using the Enter key as a toggle for selecting the >> > node to avoid having to click as much. This key is also free from >> bindings in the Node Tool, and makes an intuitive natural key for >> > selecting/deselecting. As an alternative, I'd suggest the spacebar >> (which can be used on websites for toggling radio buttons/checkboxes), >> but I fear a >> > clash with grabbing the view to drag, which I also dearly love. :) It's >> possible that it's not too much of a clash, as it's tapping vs holding. >> > >> > >> > >> > >> > -C >> > >> > >> > On Mon, Jun 13, 2016 at 2:53 PM, Brynn <brynn@...3133...> wrote: >> > >> > Yes, I watched his video :-) >> > >> > If we weren't in the middle of a release cycle, it would be nice to discuss >> > the mouse snapping or maybe called pointer snapping. But Olof tells me the >> > snapping is super heavy in the program. >> > >> > And I would be happy with either of your solutions :-) >> > >> > Thanks, >> > brynn >> > _____________________________________________ >> > From: C R >> > Sent: Monday, June 13, 2016 4:19 AM >> > To: Brynn >> > Cc: Olof Bjarnason ; LucaDC ; inkscape-devel >> > >> > Subject: Re: [Inkscape-devel] possibly strange question (snap) >> > >> > >> > Clicking and dragging selects every node the circle touches, as if you were >> > painting the selection. The distance is controlled by the bounds of the >> circle, which is better, since you can control the radius as shown, with >> the >> > mouse wheel for extra precision. >> > >> > >> > Olof's selection tool is better for instances where nodes are very close >> together though (make sure you watch his video): >> > https://youtu.be/dy3YQWLBb4Y >> > >> > >> > >> > Both would be awesome to have, but I think Olof is right about the >> complexity of the paint select tool being hard to impliment vs his very >> nice, and tidy solution, which may work better for your case anyway. :) >> > >> > >> > -C >> > >> > >> > >> > On Mon, Jun 13, 2016 at 9:37 AM, Brynn <brynn@...3133...> wrote: >> > >> > Hi C R, >> > From my simple user's perspective, that seems like it should help. >> > But >> > the optional distance setting would need to be closer than Inks Prefs >> dialog >> > (and not require a restart, like grab sensitivity). >> > Between the brush idea and the key stroke idea, it seems like they >> > are >> > very similar. Either way, it's the area around the mouse pointer where the >> > node is selected. So it seems like the "brush" select would be more fluid. >> > But how would it be enabled? Do you click to grab the node, or does >> just touching it with the "brush" select it? This seems very similar to >> the lasso select which was mentioned earlier in this thread. If the >> lasso could >> > be made to work with the Node tool (in all systems), then maybe you >> could just add the "brush" to it? (Of course, keeping in mind my >> non-technical perspective, hah.) >> > Thanks for everyone's interest in this :-) >> > >> > All best, >> > brynn >> > ________________________________________________ >> > From: C R >> > Sent: Monday, June 13, 2016 12:54 AM >> > >> > To: Brynn >> > Cc: LucaDC ; inkscape-devel >> > Subject: Re: [Inkscape-devel] possibly strange question (snap) >> > >> > >> > See this quick video capture for Blender paint-select feature: >> > https://www.dropbox.com/s/r38x7q9yjdjggdl/paint_select_blender_demo.mp4?dl=0 >> > >> > >> > >> > As you can, see it's faster and more convenient than anything we've >> discussed so far. Precision can be changed on the fly. >> > Their implementation requires you to commit the selection with the >> Escape button, but I don't think this is necessary. >> > >> > >> > In short, we could do this, but better. >> > >> > >> > -C >> > >> > >> > >> > >> > On Mon, Jun 13, 2016 at 12:47 AM, Brynn <brynn@...3133...> wrote: >> > >> > That sounds helpful too. I would have to try it first, before I know if it >> > helps with my particular problem. >> > >> > It sounds like it essentially makes the pointer bigger? >> > >> > Isn't that similar to what the Grab Sensitivity does? While it doesn't >> affect the Node tool, I've tried with the Selection tool. It works >> great if the objects on the canvas are far enough apart. But on a >> crowded canvas, >> > it seems to want to select objects next to the one I want to select. I >> guess Inkscape can't read my mind, and know which object I want. >> > >> > I wonder if it would be the same case with the node pointer? >> > >> > All best, >> > brynn >> > >> > _____________________________________________ >> > From: C R >> > Sent: Friday, June 10, 2016 1:46 PM >> > To: Brynn >> > Cc: LucaDC ; inkscape-devel >> > >> > Subject: Re: [Inkscape-devel] possibly strange question (snap) >> > >> > >> > Blender has a nice solution to the problem of clicking/selecting small >> nodes. >> > >> > >> > If you press "c" it turns the mouse pointer into a circle. You can >> adjust the size of this circle with the mouse-wheel, and just paint over >> the nodes >> > you want to select with it. press escape when done to exit the selection >> mode. though we could just as easily use the enter key which may be more >> intuitive. >> > >> > >> > On Tue, Jun 7, 2016 at 3:48 PM, Brynn <brynn@...3133...> wrote: >> > >> > Ok, thanks Luca. >> > >> > Fyi to everyone, Olof is helping make a better and more clear >> presentation of the situation and request. Just take me a little time >> to learn how to make a video (which I should have done years ago). >> > >> > Thanks again, >> > brynn >> > >> > -------------------------------------------------- >> > From: "LucaDC" <dicappello@...2144...> >> > Sent: Tuesday, June 07, 2016 2:59 AM >> > To: <inkscape-devel(a)lists.sourceforge.net> >> > Subject: Re: [Inkscape-devel] possibly strange question (snap) >> > >> > >> > >> > Brynn wrote >> > >> > (That would be the first use I've ever found for mouse position values >> in the bottom-right corner, that shows the position of the mouse. If >> you're working in a file where measurement needs to be precise, you can >> place your >> > mouse on the precise coordinates.) >> > >> > >> > This could hardly be called a precise positioning as the displayed >> coordinates are rounded and their definition depends on the zoom level. >> What >> > you get depends on the discretization of your monitor's pixels >> coordinates translated into document's coordinates. >> > A better way to achieve a precise positioning is using guides: drag out >> a guide, open its dialog to set its coordinates and snap to its origin >> whatever you want to be exactly there. >> > >> > Luca >> > >> > >> > >> > >> > -- >> > View this message in context: >> > http://inkscape.13.x6.nabble.com/possibly-strange-question-snap-tp4976904p4… >> Sent from the Inkscape - Dev mailing list archive at Nabble.com. >> > >> > ------------------------------------------------------------------------------ >> What NetFlow Analyzer can do for you? Monitors network bandwidth and >> traffic >> > patterns at an interface-level. Reveals which users, apps, and protocols >> are >> > consuming the most bandwidth. Provides multi-vendor support for NetFlow, >> J-Flow, sFlow and other flows. Make informed decisions using capacity >> planning reports. >> https://ad.doubleclick.net/ddm/clk/305295220;132659582;e >> _______________________________________________ >> > Inkscape-devel mailing list >> > Inkscape-devel(a)lists.sourceforge.net >> > https://lists.sourceforge.net/lists/listinfo/inkscape-devel >> > >> > >> > >> > ------------------------------------------------------------------------------ >> What NetFlow Analyzer can do for you? Monitors network bandwidth and >> traffic >> > patterns at an interface-level. Reveals which users, apps, and protocols >> are >> > consuming the most bandwidth. Provides multi-vendor support for NetFlow, >> J-Flow, sFlow and other flows. Make informed decisions using capacity >> planning reports. >> https://ad.doubleclick.net/ddm/clk/305295220;132659582;e >> _______________________________________________ >> > Inkscape-devel mailing list >> > Inkscape-devel(a)lists.sourceforge.net >> > https://lists.sourceforge.net/lists/listinfo/inkscape-devel >> > >> > >> > ------------------------------------------------------------------------------ >> What NetFlow Analyzer can do for you? Monitors network bandwidth and >> traffic >> > patterns at an interface-level. Reveals which users, apps, and protocols >> are >> > consuming the most bandwidth. Provides multi-vendor support for NetFlow, >> J-Flow, sFlow and other flows. Make informed decisions using capacity >> planning reports. >> https://ad.doubleclick.net/ddm/clk/305295220;132659582;e >> _______________________________________________ >> > Inkscape-devel mailing list >> > Inkscape-devel(a)lists.sourceforge.net >> > https://lists.sourceforge.net/lists/listinfo/inkscape-devel >> > >> >> >> >> >> >> ------------------------------------------------------------------------------ >> What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic >> patterns at an interface-level. Reveals which users, apps, and protocols are >> consuming the most bandwidth. Provides multi-vendor support for NetFlow, >> J-Flow, sFlow and other flows. Make informed decisions using capacity >> planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e >> _______________________________________________ >> Inkscape-devel mailing list >> Inkscape-devel(a)lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/inkscape-devel > > > > ------------------------------------------------------------------------------ > What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic > patterns at an interface-level. Reveals which users, apps, and protocols are > consuming the most bandwidth. Provides multi-vendor support for NetFlow, > J-Flow, sFlow and other flows. Make informed decisions using capacity > planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e > _______________________________________________ > Inkscape-devel mailing list > Inkscape-devel(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/inkscape-devel >

2 3

Undo Redo in Inkscape
by Kamalpreet Grewal 10 Jun '16

10 Jun '16

Hi all Is there some guide/reference available from where I can learn on how to implement undo and redo functions associated to something new feature added? -- Kamalpreet Kaur Grewal Blog: http://kamalpreetgrewal.com/

2 1

Re: [Inkscape-devel] [Inkscape-user] Inkscape guides
by ugajin 09 Jun '16

09 Jun '16

I am using v0.91 (pre-build) on OSX One way the behaviour may be reproduced is as follows: - open Inkscape/document - add guide - set empty labels with Guidline dialogue - save document, and close Inkscape - reopen inkscape/document - add label property value using SVG editor - set: result crash! Sometimes, it takes two edits to cause a crash. The key to reproducing this, is to save and reopen Inkscape/document. Also, I have an extension update for guides... that has options for labels. The script can write guide labels OK, but they are not editable in either the Guidline dialogue or the SVG editor. Trying to do so causes Inkscape to crash :( I do not want to file a bug report if this issue has already been flagged and/or resolved. I am searching the database, but haven't found it. Also, Inkscape does not render the guide color when the property is set via the SVG editor and/or an extension script, but at least Inkscape doesn't crash. Could/would someone please clarify the position. Thanks. -u ---- On Wed, 08 Jun 2016 18:55:40 +0000 <ugajin@...3403...> wrote ---- Thanks. It appears Bug #1374870 is a different issue. -u ---- On Wed, 08 Jun 2016 18:47:50 +0000 Marc Jeanmougin<marc@...3062...> wrote ---- Yes. (it's tracked in https://bugs.launchpad.net/inkscape/+bug/1374870 ) -- Mc On 06/08/2016 08:19 PM, ugajin wrote: > Does this mean the feature will work in next release? > > Thanks again. > > -u > > ---- On Wed, 08 Jun 2016 17:18:39 +0000 *Tavmjong Bah<tavmjong@...8...>* > wrote ---- > > On Wed, 2016-06-08 at 16:57 +0000, ugajin wrote: > > > > I note that Inkscape fails to render guide colours when set via SVG > > editor. Would someone have a try, edit a sodipodi: guide color > > attribute value, and confirm if it is just me with this issue. > > I tried with trunk. Changing the guide color seems to work. I believe > it might not in 0.91 as there was a bug. > > Tav > > Thanks. > > > > -u > > > ------------------------------------------------------------------------------ > What NetFlow Analyzer can do for you? Monitors network bandwidth and > traffic > patterns at an interface-level. Reveals which users, apps, and > protocols are > consuming the most bandwidth. Provides multi-vendor support for > NetFlow, > J-Flow, sFlow and other flows. Make informed decisions using capacity > planning reports. > https://ad.doubleclick.net/ddm/clk/305295220;132659582;e > _______________________________________________ > Inkscape-user mailing list > Inkscape-user(a)lists.sourceforge.net > <mailto:Inkscape-user@lists.sourceforge.net> > https://lists.sourceforge.net/lists/listinfo/inkscape-user > > > > > > ------------------------------------------------------------------------------ > What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic > patterns at an interface-level. Reveals which users, apps, and protocols are > consuming the most bandwidth. Provides multi-vendor support for NetFlow, > J-Flow, sFlow and other flows. Make informed decisions using capacity > planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e > > > > _______________________________________________ > Inkscape-user mailing list > Inkscape-user(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/inkscape-user > ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________ Inkscape-user mailing list Inkscape-user(a)lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-user

1 0

Launchpad Buildd (sic) System
by Partha Bagchi 08 Jun '16

08 Jun '16

Since yesterday, I am getting flooded with "Launchpad Buildd (sic) System" messages on this list. Does anyone know how to stop this? Thanks in advance, Partha

3 4

sodipodi guides
by ugajin 08 Jun '16

08 Jun '16

I note that Inkscape fails to render guide colours when set via SVG editor. Would someone have a try, edit a sodipodi: guide color attribute value, and confirm if it is just me with this issue. Thanks. -u

1 0

Re: [Inkscape-devel] Style dialog
by Kamalpreet Grewal 08 Jun '16

08 Jun '16

On Wed, Jun 8, 2016 at 1:05 AM, Tavmjong Bah <tavmjong@...8...> wrote: >> > 1. ID's should not be added to the class attribute. They need to be >> > added to the style sheet which is not easy to do at the moment. The >> > SPStyle class is not very complete. >> How should I proceed on this? > > The SPStyle class probably needs to keep a parsed copy of the style > sheet. It does not have to interpret the style sheet (that is the roll > of libcroco). The data can be stored as a map. Something like: > > std::map<std::string, std::vector<std::string> > > > Where the first string is the selector: .red While the vector of > strings keeps track of the properties: fill:red, stroke:blue, etc. > > After any change to the map, the style sheet should be rewritten to the > style XML node. So the implementation I did with 'class' attribute, I should discard it? And rather add selector to style attribute of the object? I should go like: When '+' is clicked and object(s) is(are) selected, then the selector should be added to 'style' attribute in the form like: "selector: .red;" or if it is id then "selector: #rect3542" | V Is this how it should work? And coming to parsed copy of stylesheet you mentioned, I should create a map first. And add the existing style values in it in the second string. Will this map exist, if no selector exists for the document? -- Kamalpreet Kaur Grewal Blog: http://kamalpreetgrewal.com/

2 1