- Inkscape Devel - Inkscape Mailman

A Study on Free/Open Source Software Defect Management
by Anu Gupta DCSA 10 Apr '07

10 Apr '07

Dear Inkscape Contributots, I am really thankful to Free/Open Source Software development community for their overwhelming response to the survey on practices and problems of defect management in Free/Open Source Software projects. If you have not participated ealier, you may spend a few minutes now too. The Online Questionnaire is available at: http://anu.puchd.ac.in/phpESP/public/survey.php?name=FOSS_Defect_Survey I hope you have found all the questions interesting and thought-provoking. Your answers will be kept anonymous.The data thus collected will only be used for research purpose. The insights gained from the study can further help us to extract publicly accessible defect data and determine impact of defect management practices on software quality. The results of study will soon be communicated to you. Thank You With regards, Anu Gupta Senior Lecturer Department of Computer Science and Applications, Panjab University, Chandigarh. INDIA In case of any problem in accessing/using the above mentioned link please contact: E-mail: anugupta@...1665... anugupta98@...400...

1 0

Tango Icons
by David Christian Berg 09 Apr '07

09 Apr '07

Hey guys! I've seen several screenshots with Tango icons being used. However, I just don't manage to find these icons for Inkscape anywhere. Could you maybe give me a hint? Or even better, can anybody include them in SVN? Thanks! David

3 3

Changes in the selector tool
by Diederik en Rezi 09 Apr '07

09 Apr '07

Hi, Some major changes were planned to the selector tool, see e.g. Bulia's list of changes in. http://sourceforge.net/tracker/?func=detail&aid=1589436&group_id=93438&atid… you'll have to scroll down a bit.... One of them was to have an option to snap either the APPROXIMATE_BBOX or the GEOMETRIC_BBOX, which would enable us to remove the confusing snap nodes / snap bbox option. In the future snapping to the grid/guide/path will always occur when the relevant grid/guide/path is visible, but that's for later. For now I've implemented the two bbox modes hard coded in the constructor of Inkscape::Seltrans in seltrans.cpp (at line 98). You can select the behavior you'd like and experiment with it, but for default I left at APPROXIMATE_BBOX. If you all agree on this new behavior then I will change the preferences in the UI, but I've never touched the UI before so I would like to have some feedback before diving into this. Along the way I've solved various snapping bugs, but probably also introduced some fresh ones. Let me know if you find one! There are some things to note: - If you choose the GEOMETRIC_BBOX, the handles will now be located at the GEOMETRIC_BBOX (they used to be always located at the APPROXIMATE_BBOX) - The origin option is not being used and will be deleted soon. - The origin doesn't drift away any longer (unless the object is being mirrored while scaling/stretching and APPROXIMATE_BBOX has been selected, but I still need to fix that) - The stroke width scales while dragging, even when the corresponding button has been disabled. When releasing the handle everything turns out just fine, but while dragging it still looks like snapping wrong. I don't think this is due to the selector tool though. Has anyone looked into this before? Regards, Diederik van Lierop

3 2

Re: [Inkscape-devel] [Inkscape-user] inkscape and Xara
by kaver 09 Apr '07

09 Apr '07

> Elwin Estle wrote the following on 4/5/2007 7:48 AM: > > Sometime back I remember seeing something about how Inscape was planning to merge > > with/share code with the open source version of Xara extreme. I was just curious, > > whatever happened to this idea? Yes, I'd be interested as well in knowing what the developers have done along these lines. It seemed at the time that there was a genuine effort to achieve some sort of sharing and mutual benefit. Did this happen or are the two projects just too far along their respective paths to allow easy cross-fertilisation? I notice that the Inkscape Paint Bucket idea is getting envious mention by members of the Xara community, and that some people are worried about Xara losing its appeal. While it has speed, people also note that some programs such as Inkscape are making impressive gains in these areas as well. Erik Halbert kaver@...68...

2 2

Re: [Inkscape-devel] SoC 3D box tool - website updated
by bulia byak 08 Apr '07

08 Apr '07

On 3/30/07, Thorsten Wilms <t_w_@...123...> wrote: > As long as boxes are the only supported primitive, They don't need to remain the only primitive for long. Very little will change in the properties and operation of the 3D tool if we teach it to create, for example, a cylinder or a cone inscribed into the 3D box instead of the box itself. It should be quite easy to add. > there's no point > in having VPs without box is what I meant. A VP without a box is no more useful than a gradient handle on canvas without an obejct wit this gradient :) > But there should be planes/grids at least, too. The beauty of the proposed approach is that the 3D boxes themselves can serve as both planes and grids. Any dragging of a box's corner will snap it to the edges of other boxes, making boxes with collinear edges very easy to do. Also there will be commands for subdividing a box into smaller boxes in any dimension, thus creating snappable 3D grids. -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org

5 10

Re: [Inkscape-devel] SoC 3D box tool - website updated
by Bryce Harrington 08 Apr '07

08 Apr '07

On Fri, Mar 30, 2007 at 10:16:40AM +0200, Thorsten Wilms wrote: > BTW, have a look at http://www.khulsey.com/demo_howto_car.html > I have to wonder if using a 3d app wouldn't be more efficient, but this > at least impressive and maybe inspiring :) I worked in an engineering company where we did a lot of 3d cad work, but while the software was good at representing the parts extremely accurately, there was no way it could even come close to achieving the "magazine schematic" quality of that graphic; for this we always had 2d illustrators redraw it in illustration software, using the 3d renderings only as the base. Today I imagine the ideal would be to use a program like blender, export as SVG, and then use inkscape to cleanup and beautify the end result. In any case, while this car example is perhaps rather extreme, there's a vast range of simpler cases - floor plan layouts, woodworking diagrams, etc. etc. - that people could get good use out of it. :-) Bryce

1 0

Memory leak in Clone Tiler
by Vladimir Savic 06 Apr '07

06 Apr '07

I'm deffinitely not an expert, but it seems that Clone Tile has a memory leak in clonetiler_remove. Removing clones doesn't free the memory taken for their creation (speaking of really many clones -- 1000 objects should be enough) but removes the clones itself (XML editor watched). Observe how memory increases when there are many clones created but doesn't get any lower when hitting Remove button. Vlada

1 0

Fwd: Fantastic 3D renderer in-browser outputs SVG
by Bill Baxter 06 Apr '07

06 Apr '07

---------- Forwarded message ---------- From: Bill Baxter <wbaxter@...400...> Date: Apr 6, 2007 10:18 AM Subject: Re: [Inkscape-devel] Fantastic 3D renderer in-browser outputs SVG To: Aaron Spike <aaron@...749...> On 4/6/07, Aaron Spike <aaron@...749...> wrote: > Donn wrote: > >> This is almost exactly the same as the demo here: > >> http://treebuilder.de/default.asp?file=206524.xml > >> > > Also impressive, but it does not let you get the svg of the item. The one I > > linked is cool because you can position (and scale and rotate etc) the 3D > > thingum and then get an SVG file which is loadable in Inkscape. I think that > > plain rocks. (Unless I missed something) > > > > I see some talk of 3D-ish stuff by way of vanishing points and such and I > > can't help but wish for cool like that Firefox canvas trick. > > Well the difference is that bob's link doesn't generate an SVG; it is an > SVG. > > http://treebuilder.de/svg/js3d/advancedTest1.svg Interesting. Both do their real work using javascript, just one has the script embedded inside the svg and the other is sort of turned inside out with the svg inside the script. Well, not exactly but close enough. Is it possible to put mouse handling code inside svg's? If so then you could make a single svg that has the features of the OP's link. --bb

1 1

Suggestion for a better paint bucket cursor
by Bill Baxter 06 Apr '07

06 Apr '07

I thought the paint bucket cursor could use a little work. So here's my humble offering. Not sure how to convert it to an XPM but it should still have the same original 3 color palette so it should convert no prob for someone with GraphicsMagick 'convert' in easy reach. --bb

4 6

"move selection to layer above/below" in wrong menu
by David Christian Berg 06 Apr '07

06 Apr '07

Hey guys! I just stumbled across that fact, that "Move selection to layer above/below" is in the layers menu, while I think it would make a lot more sense to be in the object menu (although that is already rather full) since you actually do not modify the layer but the selection. 1.: What's your opinion on this? 2.: Should I file a bug about it? Take care! David

2 1