- Inkscape Devel - Inkscape Mailman

CRASH: connector to node tool
by unknown＠example.com 04 Sep '05

04 Sep '05

In the lastest CVS. Create some rectangles. draw a connector between two and immediately switch to the node tool. creates the following output in gdb. Aaron Spike (gdb) run Starting program: /usr/local/inkscape/bin/inkscape [Thread debugging using libthread_db enabled] [New Thread -1222482112 (LWP 12057)] ** ERROR **: file connector-context.cpp: line 247 (void sp_connector_context_dis pose(GObject*)): assertion failed: (cc->newConnRef == NULL) aborting... Program received signal SIGABRT, Aborted. [Switching to Thread -1222482112 (LWP 12057)] 0xffffe410 in __kernel_vsyscall () (gdb) bt #0 0xffffe410 in __kernel_vsyscall () #1 0xb7296175 in raise () from /lib/tls/i686/cmov/libc.so.6 #2 0xb72977d8 in abort () from /lib/tls/i686/cmov/libc.so.6 #3 0xbfffe320 in ?? () #4 0x00000000 in ?? () #5 0x00000020 in ?? () Previous frame inner to this frame (corrupt stack?)

3 2

Inkscape Build Report 20050903-0640
by Bryce Harrington 03 Sep '05

03 Sep '05

Most of the problems from the previous build report were fixed with the inkscape-20050830-1220 snapshot. = Analysis Report for inkscape = Platform Unpack Config Build Install WRNS ERRS ------------------------------------------------------------------------ debian x86 0 0 0 0 5 0 Test Status Score Info ------------------------------------------------------------------------ sut-1 ?? == Errors == none == Warnings == display/canvas-arena.cpp:91: warning: invalid access to non-static data member display/canvas-arena.cpp:91: warning: (perhaps the `offsetof' macro was used display/sp-canvas.cpp:127: warning: invalid access to non-static data member ` display/sp-canvas.cpp:127: warning: (perhaps the `offsetof' macro was used libnrtype/Layout-TNG-Output.cpp:226: warning: enumeration value ` == Environment Summary ==

1 0

Is it allowed to post Atachments?
by Florian 03 Sep '05

03 Sep '05

my first question... or is it better to upload the svg-file to my webspace greetings florian

3 2

Inkscape Project Status Sept 1, 2005
by Bryce Harrington 02 Sep '05

02 Sep '05

Project Status September 1, 2005 Lots has happened over the past month, including a new 0.42 release, completion of the four Google Summer of Code projects, several really useful features including pressure sensitivity, enhanced node editing, and extensions, and some project infrastructure work, such as a new RSS feed at http://inkscape.org/inkscape.rss. We've seen a number of articles and mentions of Inkscape in various magazines and online news sites. We've just initiated a new Inkscape Tester community. This group is being organized to focus on testing of robustness, usability, performance, etc. This is just getting started, so if this sounds interesting its a great time to get involved. There is a mailing list (http://lists.sourceforge.net/lists/listinfo/inkscape-tester) and a wiki page (http://wiki.inkscape.org/cgi-bin/wiki.pl?TestingInkscape) The Inkscape User community is considering starting up a monthly Logo competition, to generate high quality logos for open source projects that need them. If you'd like help with organizing or participating in this, please join us at the inkscape-user list. Tavmjog Bah announced a new, much more complete release of his Inkscape book, covering 90% of the user interface. http://tavmjong.free.fr/INKSCAPE/MANUAL/html/index.php Looking forward over the next month, we're planning on continuing development for a bit longer, then get a 0.43 release pushed out. We're hoping it can be delivered reasonably quickly, but we still have some more features to fold in. It sounds like the concensus is to do 100 points worth of RFE's, followed by 100 points of bug fixes, then a hard freeze, and a release. Statistics Jun 1 Jul 1 Aug 1 Sep 1 ========== ====== ====== ====== ====== Max Week's Rank on SourceForge: 38 35 3 23 Total SF Page Views 1,935,964 3,797,037 4,452,437 4,139,401 Total SF Downloads 254,647 283,789 378,712 448,994 Total Freshmeat URL Hits 19,149 19,809 21,261 22,422 Total Freshmeat Subscriptions 183 189 208 220 Lines of Code in src/: 374,180 376,319 389,945 404,800 Code lines 260,236 261,600 270,423 279,621 Comment line 67,136 67,724 70,478 73,904 Blank 53,443 53,651 55,698 57,937 Lines of Docs in doc/: 27,790 27,792 28,090 28,121 Lines of content in website: 42,490 42,700 44,483 44,732 Size of the Inkscape wiki: 26,729 28,525 34,890 34,847 Bugs open/total: 215/1223 196/1312 215/1445 250/1555 Features open/total: 453/ 728 471/ 767 440/816 466/ 874 Patches open/total: 11/ 230 10/ 268 8/325 6/ 332 CVS Commits (as per inkscape-cvs) 12,040 12,372 12,915 13,423 Inkscape-devel membership: 179 188 200 217 Inkscape-announce membership: 202 217 236 274 Inkscape-user membership: 248 258 276 295 Num Translations: 33 33 33 33 Ave Translation Ratio: 47.8 48.6 54.6 54.9 * - Statistics unavailable

1 0

Re: [Inkscape-devel] 0.42.2 Announcement
by JAKOB ILVES 02 Sep '05

02 Sep '05

Hello! Any progress on getting the static rpm for inkscape 0.42.2 up on the downloads section? Right now only the static rpm for inskcape 0.42.0 is available, and that is the broken version and I'm looking forward to test the 0.42.2 version. Best regards IlvJa __________________________________________________ >From bulia byak <buliabyak@...400...> Sent Fri 8/26/2005 7:21 AM To Ted Gould <ted@...11...> Cc Inkscape Devel List <inkscape-devel(a)lists.sourceforge.net> Subject Re: [Inkscape-devel] 0.42.2 Announcement __________________________________________________ On 8/26/05, Ted Gould <ted@...11... (mailto:ted@...11...)> wrote: > Now that there are binaries for 0.42.2 Still missing are autopackage and static rpm. I think we need at least one of these to make an announcement. -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org (http://www.inkscape.org) ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf (http://www.sqe.com/bsce5sf) _______________________________________________ Inkscape-devel mailing list Inkscape-devel(a)lists.sourceforge.net (mailto:Inkscape-devel@...142...ge.net) https://lists.sourceforge.net/lists/listinfo/inkscape-devel (https://lists.sourceforge.net/lists/listinfo/inkscape-devel)

2 1

dxf dev?
by Jon Phillips 01 Sep '05

01 Sep '05

How is the dxf Summer of Code developing? I haven't heard much about how this is progressing? When is the summer of code up anyhow? Jon -- Jon Phillips San Francisco, CA USA PH 510.499.0894 jon@...235... http://www.rejon.org MSN, AIM, Yahoo Chat: kidproto Jabber Chat: rejon@...896... IRC: rejon@...897... Inkscape (http://inkscape.org) Open Clip Art Library (www.openclipart.org)

8 20

Linux Journal
by Carl Hetherington 01 Sep '05

01 Sep '05

Hi all, Sorry if this has already been mentioned, but Inkscape has won the 2005 Linux Journal Editors' Choice award: http://www.linuxjournal.com/article/8293 Well done everybody! Carl

1 0

python for windows
by bulia byak 01 Sep '05

01 Sep '05

I'd like to revisit the issue of shipping Windows package with their own Python/PyXML. By now I use Aaron's python extensions all the time, they are immensely useful. Not as convenient as native solutions would be, but still a lot of fun and an important part of my design work. The current instructions page for Windows: http://wiki.inkscape.org/cgi-bin/wiki.pl?GettingEffectsWorking/Windows is way too scary for an average user. Python alone might be OK, but PyXML on top of that is certainly too much. I think very few dedicated users would venture into this. So, what do you think about including a minimum Python/PyXML into the Windows installer and enabling extensions by default? I think the file size increase won't be intolerably big. -- bulia byak Inkscape. Draw Freely. http://www.inkscape.org

7 15

Re: [Clipart] Re: [Inkscape-devel] releasing Clip Art Browser 0.4!!
by Nicu Buculei 01 Sep '05

01 Sep '05

Tobias Jakobs wrote: > >>Inkscape and OCAL folk, do you think we should host this as an Inkscape >>project, or an OCAL project, or open up a separate project for this? I'm >>tempted to open a new separate project for this browser, as it is very >>useful to OSS in general, yet, if we move the codebase too far away, >>will the locus of attention be too far outside of our combined >>developers? >> >>** PLEASE give some feedback on what I jus proposed soon!!!! ** >> > > > I would say, its more OCAL than Inkscape related and I would like to see > it in AbiWord, Gnumerik, Gimp, ... integrated too. It would be nice to have it in all those apps, but we also need it on all platforms where Inkscape run, so we can close RFEs like this (for an object palette): https://sourceforge.net/tracker/?func=detail&atid=604309&aid=1262745&group_… -- nicu

1 0

Re: [Inkscape-devel] CVS for dxf import
by Matt Squires 31 Aug '05

31 Aug '05

---------------------------- Original Message ---------------------------- Subject: Re: [Inkscape-devel] CVS for dxf import From: "Matt Squires" <matthew.squires@...854...> Date: Wed, August 31, 2005 3:16 pm To: "John Taber" <jtaber@...480...> -------------------------------------------------------------------------- The readme has links to the dxf files that I have been using. I have a copy of AutoCAD at school, and use CadStd Lite at home. But CadStd lite doesn't implement many features for that reason I am using the files that I know exist and those are at Thorlabs and Newfocus. here are the links to the two images on the web site. The first has two elements that import incorrecty on the left hand side. I will try to get to that in the next few days. http://newfocus.com/images/mechanicaldrawings/edxf/9807e.dxf http://newfocus.com/images/mechanicaldrawings/edxf/9051e.dxf Thorlabs uses solid and trace a lot for their drawings. I haven't supported those yet, so the drawings look a little funny. I currently don't support dimensions so that also looks funny. AutoCAD sometimes complains that their dxf is bad. http://www.thorlabs.com/thorcat/1700/1708-E0W.dxf http://www.thorlabs.com/thorcat/8500/8577-E0W.dxf Later tonight I will put all the sample files that I used for initial work in the dxf2svg folder, and will build a test file with AutoCAD that will have most of the commonly used elements in dxf. I have other comments...see notes below > Later - You should first post the examples that you have tested with, so far we have seen none, just an assurance or screenshot that it all works - it is or should be your job to show the code works before we spend our time checking it, you're the one being sponsored . And besides, you I have tested with files of my own creation and from two separate commercial companies. I also used the demo file from QCad, and it imported great. I used commercial CAD drawing to get real drawings that are used in the real world. I don't spend all my time looking for new test files. I have 6-10 files from 4 different sources. Call it 15 files and 5 sources if you count the files from Eric. I have spent my time trying to get the features to work in the files. > know it is pretty basic PhD 101 to show(prove) that your methodology works. You should be treating this the same as any other research project. In all research projects I have been involved in it is only the most proprietary researchers that withhold information from others. My research group directly competes with a group in Germany, but I have never had a question not answered or information withheld from them, even for the stupid questions. > > Matt Squires wrote: >> I just did a test using dxf versions R12, 2000, and 2004 and it loaded with out hanging. It used circles, plines with arcs, arcs, lines, and text. It was created using AutoCAD 2004. >> >> If you can be more specific as to what was in the file I will try to fix the problem. Most of the segfaults in the code from last Saturday came from blank lines in the dxf files, that has been completely fixed. I assume you are refering to the file Eric tested. Did you also have a file >> that segfaulted? If so, please send it to me. I can handle large attachments. >> >> Matt >> >> >>>The dxf2svg code still does not work for simple R12 dxf drawings (it goes into an indeterminate loop and every 3 minutes outputs the same "translate..." line) - OpenOffice Draw code handles the same translation perfectly in a microsecond. The first code submission (just last Saturday), completely segfaulted. I don't think we should be the ones having to test for such basic operation. Personally I think this project still needs a lot of work to be finished and useful. >>> >>>Bryce Harrington wrote: >>> >>>>On Tue, Aug 30, 2005 at 10:08:51AM -0600, Matt Squires wrote: >>>> >>>> >>>>>Bryce, >>>>> >>>>>The dxf2svg part is coming along. I have gotten it to work in >>>>> Inkscape >>>>>with an .inx file. I would like to add it to the Inkscape CVS tree under >>>>>share or extensions. Can I get CVS access and some guidence where to put >>>>>code that is not directly part of the Inkscape code base but an extension? >>>>> >>>>>I think there is a simple way to add dxf export using pstoedit. I >>>>> don't >>>>>know if anyone has tried it before, but I was able to do some simple conversions. Again the only change would be .inx files. >>>>> >>>>>My SF id is squires >>>> >>>> >>>>Hi Matt, >>>> >>>>Thanks for posting the request; I've enabled your SF CVS access. >>>> >>>>Bryce >>>> >>>> >>>>------------------------------------------------------- >>>>SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices >>>>Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA >>>>Security * Process Improvement & Measurement * >>>>http://www.sqe.com/bsce5sf >>>>_______________________________________________ >>>>Inkscape-devel mailing list >>>>Inkscape-devel(a)lists.sourceforge.net >>>>https://lists.sourceforge.net/lists/listinfo/inkscape-devel >>>> >>>> >>> >> >> >> >

1 0