- Inkscape Devel - Inkscape Mailman

Inkscape in the press : Spain
by Jose Hevia 04 Oct '05

04 Oct '05

An article of Inkscape with topic "Ilustracion con Inkscape" in the Spanish magazine "TodoLinux". Not a very good one in my opinion. Jose Hevia

1 0

RE: [Inkscape-devel] win98 to be dropped?
by Taraben, Adib 04 Oct '05

04 Oct '05

Bob, if you guide me what to do. I have no experience with this gtk stuff. Adib. -----Original Message----- ... > -- > bulia byak > Inkscape. Draw Freely. > http://www.inkscape.org > > Bulia, It saddens me, too. What we need is some guy who has Win98, and enough disk space to set up the Mingw environment to build and test. Is there nobody out there? Please be patient with us. We are on your side, dude. You are the best GUI programmer on the planet, and the heart and soul of this project. Bob ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Inkscape-devel mailing list Inkscape-devel(a)lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel

2 1

RE: [Inkscape-devel] Inkscape und Drucken
by Taraben, Adib 04 Oct '05

04 Oct '05

Thomas, hast du schon mal auf dem bug-tracker nach deinem problem gesucht ? http://sourceforge.net/tracker/?group_id=93438&atid=604306 ich kann mich an so was wie Drucker in Verbindung mit Netzwerk erinnern. Auch findest du im Jabber Netz bei #inkscape.de evtl. deutsche Hilfe Das wars erst mal in aller Schnelle, Adib. ---- I will translate to this english speaking list :-) Thomas found this program and is very exited. But when he prints over the network there comes an Runtime error: 10H in Modul msvcrt.Dll bei 0197:7820ea8f So printing for him is not possible. He asks whether it is possible to store in a format like *.DXF *.Hpg or *.plt. He has a pantograph milling machine that can read those formats best. Then he posts a RFE Inkscape should also StarOffice compatible file format. so far Thomas. -----Original Message----- From: inkscape-devel-admin(a)lists.sourceforge.net on behalf of thomas Sent: Tue 10/4/2005 17:12 To: Inkscape-devel(a)lists.sourceforge.net Subject: [Inkscape-devel] Inkscape und Drucken Ich habe mir das Programm auf meinem Rechner gespielt, weil das was ich gelesen (im internet) habe sich gut anhörte für mich. Da ich aber kein Fachmann bin sende ich euch meine Probleme. Sollten die probleme nicht an dem programm liegen bitte ich um entschuldigung für die Störung. Druchen über das Netzwerk ist bei mir nicht möglich. Inkscape versursacht einen Ausnahmefeher 10H in Modul msvcrt.Dll bei 0197:7820ea8f Frage: Ist es möglich das was ich mit dem Programm gemalt habe in *.DXF *.Hpg oder *.plt zu speichern. Ich habe eine Gravier- Fräsmaschiene die diese Daten am besten Lesen kann viele andere kann ich zwar importieren aber muß sie in dem dazugehöriegen Programm noch einmal Zeichnen. Ich schätze mal das würde vielen Leuten die mit so einer Maschiene arbeiten helfen. Verbesserungsvorschlag: Da dieses Programm ein freies Programm ist, wäre es sehr sinnvoll wenn man die daten auch mit StarOffice öffnen kann oder dahin Eportieren. Da Staroffice auch ein freies Programm ist. So könnte man wieder etwas abstand von MS gewinnen. Mit freundlichen Grüßen Thomas

1 0

--new-canvas?
by Ralf Stephan 04 Oct '05

04 Oct '05

Hello, regarding C++ification, I've reached a point with Desktop where the class would be suited for inclusion in a Gtkmm environment, were it not for its dependency on SPCanvas etc We have now three possibilities: 1. forget about Desktop, incrementally improve the code in UI::View::Edit, first by separating Edit into Edit/EditWidget. After that, steal from Desktop what's needed. 2. Separate EditWidget from Edit. Discard rest. Rename Desktop to Edit. 3. Before worrying about 1/2, implement Gtkmm canvas under Desktop, enabling it via --new-canvas for testing. After that, goto 2. I have questions for those in the know: Is it technically possible to have everything as is, plus only a Gtkmm canvas? If so, would you prefer having a Gtkmm canvas tested first, instead of the Gtkmm UI? I have made a branch CXXIFICATION_VIEW_AND_WIDGET for work until now. As the next steps might not fit this description, should I create a second one GTKMM_CANVAS and merge them back later separately? (This appears cleaner to me.) ralf

1 0

Inkscape und Drucken
by thomas 04 Oct '05

04 Oct '05

Ich habe mir das Programm auf meinem Rechner gespielt, weil das was ich gelesen (im internet) habe sich gut anhörte für mich. Da ich aber kein Fachmann bin sende ich euch meine Probleme. Sollten die probleme nicht an dem programm liegen bitte ich um entschuldigung für die Störung. Druchen über das Netzwerk ist bei mir nicht möglich. Inkscape versursacht einen Ausnahmefeher 10H in Modul msvcrt.Dll bei 0197:7820ea8f Frage: Ist es möglich das was ich mit dem Programm gemalt habe in *.DXF *.Hpg oder *.plt zu speichern. Ich habe eine Gravier- Fräsmaschiene die diese Daten am besten Lesen kann viele andere kann ich zwar importieren aber muß sie in dem dazugehöriegen Programm noch einmal Zeichnen. Ich schätze mal das würde vielen Leuten die mit so einer Maschiene arbeiten helfen. Verbesserungsvorschlag: Da dieses Programm ein freies Programm ist, wäre es sehr sinnvoll wenn man die daten auch mit StarOffice öffnen kann oder dahin Eportieren. Da Staroffice auch ein freies Programm ist. So könnte man wieder etwas abstand von MS gewinnen. Mit freundlichen Grüßen Thomas

1 0

Re: Win98 Support sopped -or so (FW: (gtk) bug and win98)
by Taraben, Adib 04 Oct '05

04 Oct '05

Hello all, according this bug that bulia mentionen I wrote to the gtk mailing list and got so far 1 answer through the mailing list. Pls. read that they state Win98 as a "obsolte os where apperantly no developer is interested anymore." I dont know wether this is the voice of the whole gtk devel group or yust this one person. So what is our plan ? Adib. -----Original Message----- From: Hans Breuer [mailto:hans@...1020...] Sent: Mon 10/3/2005 23:40 To: Taraben, Adib Cc: GTK Devel List Subject: Re: (gtk) bug and win98 On 03.10.2005 22:44, Adib Taraben wrote: > Hello gtk-team, > > Inkscape is a SVG vector graphics editor that uses gtk and gtkmm. > Currently with the 2.8 libs there is a problem starting on win98. > http://bugzilla.gnome.org/show_bug.cgi?id=316878 > > Is it possible from you guys to investigate in this bug and find out > wether it is a real gtk bug or not? > No need to investigate. Cairo - which gtk+-2.8 depends on - is known not to work on win32. This is due to using only the unicode APIs for win32 font access. This API does not work on win9x. > Inkscape will release a new version the next weeks and it would be good > (I think) to ship the win32 version with gtk 2.8. Gtk 2.6 is known to > work also on win98. > If they are *really* interested in win9x support patches to http://cvs.cairographics.org/cairo/src/cairo-win32-font.c would probably be accepted. Though there may as well be other issues with running gtk+ on an obsolte os where apperantly no developer is interested anymore. Hans -------- Hans "at" Breuer "dot" Org ----------- Tell me what you need, and I'll tell you how to get along without it. -- Dilbert

3 2

WEBFORM i want to update the zh_cn po
by sumomofan 04 Oct '05

04 Oct '05

Message from Inkscape submission form Please note, that the submitter may not read this list. CC your answer to the submitter name: sumomofan email: sumomofan@...1018... submitted the following: i want to update the zh_cn po,but i can\'t use the cvs,please help me BTW:i didn\'t find the interface to change the language in the inkscape

2 1

src/dom/* status
by lode leroy 04 Oct '05

04 Oct '05

Can anyone give some feedback on the status of the code inside src/dom ? How much works is still to be done to have xpath support working? I noticed that xpathimpl.cpp is actually just a stub, so I suppose that there's some work left to do... is anyone working on this? -- lode

3 2

0.44 goals? (was Re: New Inkscape Goals?)
by Bryce Harrington 03 Oct '05

03 Oct '05

I'm working on getting the roadmap up to date for us. Assuming that we shoot for the usual 2-3 month development cycle for 0.44, what things are people hoping to focus on working on? Three features that have come up repeatedly in this thread are interapplication cut/paste, layer dialog, and ps/eps/pdf import support. Is anyone interested in working on one of those features for 0.44? If we could get progress made on one or two of those features for the next release I think it would make a good achievement. Bryce

3 4

about dialog text
by MenTaLguY 03 Oct '05

03 Oct '05

You know, I'm not really all that keen on the text in the new about image. It doesn't really mesh with the tone of the image itself, and ... eh, it's just kind of off-putting. Let me see if I can come up with some alternate texts before we get stuck with this one... -mental

1 0