Printing Issues
by don＠mapleriverfarms.com
Hi there,
When I print off the item I made on inkscape the words are coming out
blurry when I have them on the color background I want, but once i take
the background away they come out just fine. I am printing them right
off of inkscape. Do you have any solutions for this? Anything would be
appreciated.
Thanks,
Don
Maple River Farms
1150 E. Hibbard Rd. / PO Box 427
Owosso, MI 48867
989-743-4344
1 year, 6 months
- 2
- 1
Re: Fill Query
by Maren Hachmann
Hi Henry,
you can learn more about filters here:
https://inkscape-manuals.readthedocs.io/en/latest/filters.html
Copy-pasting a filter from one object to another is done with Ctrl+C and
then Ctrl+Shift+V on the other object.
Regards
Maren
Am 27.08.21 um 12:39 schrieb Henry Merryweather:
> Thank you for that suggestion. The images do look very similar to those
> I get when I scan my veneers.
>
> However the problem I have is that I do not know how to use such images
> in Inkscape. I would imagine there may well be some
> instructions/tutorials about this but my attempts to find these have
> failed miserably!
>
> Best wishes
>
> Henry
>
> On 26/08/2021 22:10, Maren Hachmann wrote:
>> You could try using a filter, e.g. one of these:
>>
>> https://openclipart.org/search/?query=wood+filter+lazur
>>
>> Regards
>> Maren
>>
>> Am 26.08.21 um 22:46 schrieb Henry Merryweather:
>>> /Resent since original had a large image which needed the moderator.
>>> /
>>>
>>> //I am trying to simulate what would be the effect of using wood veneers
>>> in a design created using Inkscape.
>>>
>>> I know I can create a design with a number of closed areas so that all I
>>> have to do is to select a particular area and then choose a colour to
>>> fill that area.
>>>
>>> The picture below shows a selection of typical veneers I want to show.
>>> As can be seen the veneers are not a flat colour. Is there any way I
>>> can used a scanned image of the veneer so that I can see the variation
>>> of colour when I use this to fill a selected area of my design?
>>>
>>> Best regards
>>>
>>> Henry Merryweather
>>>
>>>
>>>
>>>
>>> <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_c...>
>>>
>>> Virus-free. www.avg.com
>>> <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_c...>
>>>
>>>
>>>
>>> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>>>
>>> _______________________________________________
>>> Inkscape Users mailing list -- inkscape-user(a)lists.inkscape.org
>>> To unsubscribe send an email to inkscape-user-leave(a)lists.inkscape.org
>>>
>> _______________________________________________
>> Inkscape Users mailing list -- inkscape-user(a)lists.inkscape.org
>> To unsubscribe send an email to inkscape-user-leave(a)lists.inkscape.org
>
1 year, 6 months
- 1
- 0
Fill Query
by Henry Merryweather
/Resent since original had a large image which needed the moderator.
/
//I am trying to simulate what would be the effect of using wood veneers
in a design created using Inkscape.
I know I can create a design with a number of closed areas so that all I
have to do is to select a particular area and then choose a colour to
fill that area.
The picture below shows a selection of typical veneers I want to show.
As can be seen the veneers are not a flat colour. Is there any way I
can used a scanned image of the veneer so that I can see the variation
of colour when I use this to fill a selected area of my design?
Best regards
Henry Merryweather
--
This email has been checked for viruses by AVG.
https://www.avg.com
1 year, 6 months
- 2
- 1
- ← Newer
- 1
- Older →