- Inkscape Users - Inkscape Mailman

Select all clones of...?
by Christoph Raab 26 Jun '17

26 Jun '17

Hi everyone, I just found myself in want of an obvious option to select all clones of a particular object. Is there a way to do this? Alternatively, selecting all "Clone of: <a specific type>". Best, Christoph

2 2

Inkscape InstallFest, Sydney, late July.
by MarkT 24 Jun '17

24 Jun '17

I am planning an installFest for late July here in Sydney. We have a meet-space sponsor in the CBD. I am thinking of limiting the attendance to a ration of Inkscape Coaches to Inkscape Installees to 1:8. Are there any Inkscape Coaches in Sydney who can attend and raise the attendance limit? Thanks to everything and everyone Inkscape! Cya, MarkT The Meetup is SVG-AU --

5 12

custom default not retaining zoom level
by brynn 23 Jun '17

23 Jun '17

Hi Friends, While helping someone on a forum regarding a custom default template, I made a new default.svg template, to test what they reported. I was not able to reproduce their issue, but I might have discovered a different one. I set the zoom level to 100%, changed display units, and switched to landscape orientation. (Also changed bg color and alpha, and added some text, so as not to be confused with my existing custom default.) Everything worked as I expected, except it does not retain the zoom level. My existing custom default does open at 100%, as I expect. But this new one that I made with 0.92.1 does not. Not sure if I should attach it here, but I'll upload it, in case you need to see it. https://inkscapecommunity.com/jd/default-brynn.svg (Of course when I tested, it was named default.svg. Just added my name into the title for clarity.) Windows 7, 64-bits, Inkscape 0.92.1, 64-bits, exe installer. Shouldn't it be expected to keep the zoom level at which I saved it? Thank you very much, brynn

1 0

[Reminder] Join Us to Discuss Marketing Inkscape - In 2 Hours
by Ryan Gorley 20 Jun '17

20 Jun '17

Just a reminder to all about this meeting in just over *2 hours *(20:00 GMT): - Online: https://inkscape.org/en/*developer/chat/ - IRC: irc://chat.freenode.net/#inkscape-devel I look forward to meeting you all there! On Jun 17, 2017 8:37 PM, "Victor Westmann" <victor.westmann@...155...> wrote: > No worries! > > We're all team! :) > > Victor Westmann > On Jun 17, 2017 6:07 PM, "Arlo Barnes" <arlo.barnes@...155...> wrote: > >> On Sat, Jun 17, 2017 at 6:28 PM, Victor Westmann < >> victor.westmann@...155...> wrote: >> >>> I was just trying to help publicize this Inkscape meeting even further. >>> >>> That is good! And I did not mean to diminish that, I was just curious. >> Thanks, >> —Arlo >> >> >> ------------------------------------------------------------ >> ------------------ >> Check out the vibrant tech community on one of the world's most >> engaging tech sites, Slashdot.org! http://sdm.link/slashdot >> _______________________________________________ >> Inkscape-user mailing list >> Inkscape-user(a)lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/inkscape-user >> >> > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Inkscape-user mailing list > Inkscape-user(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/inkscape-user > >

1 0

Inkscape Hackfest 2017 - Paris
by Tavmjong Bah 19 Jun '17

19 Jun '17

Hi all, Our 2017 Inkscape Hackfest is just 8 days away. We're compiling a list of topics. Please add your input either here or on the "Topics" page: http://wiki.inkscape.org/wiki/index.php/Hackfest2017_Topics More info on the hackfest at: https://inkscape.org/en/news/2017/06/06/hackfest-2017-paris/ Also, please consider giving a donation to help support this and future hackfests: https://inkscape.org/en/support-us/hackfests/ Thanks! Tav

1 0

[Manual] Update
by Maren Hachmann 19 Jun '17

19 Jun '17

Hi Manual folks (and those who want to join us), we have reached a major milestone today: TRANSLATIONS ARE DONE :D 59 of 59 chapters translated! :) The only thing that is left to do for this step is to remove that task from the Community ToDo list on the Inkscape website ;-) (this one: https://inkscape.org/contribute/to-do-list/). I'm going to do that tomorrow. I'm so happy that we're now through with this, and now have a preliminary version available for people to look at. I also would like to thank Sylvain Chiron and Hinerangi Courtenay, who worked on the translations of the first section, for their help with this huge task. What else happened this week? ============================= - brynn's news item about the manual effort has been polished a bit further, reviewed by its author, and was published. You can read it all here now: https://inkscape.org/en/news/2017/06/06/new-inkscape-beginners-manual/ (it has also been translated to four other languages by our website translators' team). - JP, a new team member joined us as a test user on gitlab. JP wants to help by giving us feedback on how the book chapters work for new Inkscape users. - Jabier played a bit with setting up cover images on flossmanuals. - Brynn started proofreading, and has looked over the first three chapters in the second section already :) What's next? ============ The next tasks concern images and proofreading, and can be done in parallel. Images: ------- - pictures that we will keep will need English file names. These are (currently) all pictures that do not contain any (French) text. - pictures that need to be replaced or edited need to be re-made. This concerns all pictures with French text in them. For some, we may get away with just cutting off the French text, and putting its translation next to the image in the book. Others need to be shot again. If you can help with any of the image related tasks, please find more info at https://gitlab.com/inkscape/inkscape-docs/manuals/issues/16 and comment there, so we can organize who does what. Proofreading: ------------- - as you all know, the translator of most of the chapters (me) is not a native English speaker. Also, while I have fixed and updated a lot while translating already, there remain parts in the text that could be rephrased and polished a bit. We need your help with proofreading now. If you are a native English speaker, please comment at one of the section-related issues at gitlab: https://gitlab.com/inkscape/inkscape-docs/manuals/issues Current status for taking a peek ================================ The latest alpha version of our work is available for reading at http://write.flossmanuals.net/start-with-inkscape/_draft/_v/2.6/introductio… If you want to join the team, it's not too late - just send a message to the list here, or comment at gitlab, and we can get you set up. Due to the nature of the book, all chapters are very short, so work can be shared easily. Kind Regards, Maren

2 1

Join Us to Discuss Marketing Inkscape
by Ryan Gorley 18 Jun '17

18 Jun '17

If you're interested in volunteering your time and talent to help promote Inkscape, join us on the Freenode #inkscape-devel IRC channel ( https://inkscape.org/en/*developer/chat/), next *Tuesday 20 June @ 20:00 GMT*. This will be an informal meet-and-greet and a chance to take an inventory of who is interested and what experience we can bring together to spread the word about this amazing project. If you can't make it but wish to be involved, don't worry, we'll also organize a follow-up meeting in July. I look forward to meeting you all there! Ryan Gorley @ Dijt <https://dijt.co/>

3 5

Sourceforge confirmation email
by Maren Hachmann 10 Jun '17

10 Jun '17

Hi everyone, please actively look for an email from sourceforge that asks you to confirm your sourceforge mailing list membership(s). They have changed their mailing list policies to make indicating the country of residence of a subscriber mandatory. More info can be found at: https://sourceforge.net/blog/sourceforge-project-e-mail-policy-update/ (@doctormo: if you want to extract the things mentioned at https://sourceforge.net/blog/sourceforge-project-e-mail-policy-update/ , do it before June 29th - old, inactive mailing lists will be deleted, for example.) Kind Regards, Maren

2 1

background on png
by ToddAndMargo 09 Jun '17

09 Jun '17

Hi All, How do I change the background. I went into properties and changed it to light blue, but when I exported as png, I got a checker board background. What did I do wrong? Many thanks, -T -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Computers are like air conditioners. They malfunction when you open windows ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

4 4

Inkscape Use Case (Possibly atypical - print & digital for a martial arts association)
by Chris Tooley 08 Jun '17

08 Jun '17

Hello all, I just wanted to chime in to let people know of my use case that might be atypical. I have been volunteering for a non-profit martial arts organisation, the Canadian Iaido Association, for the past 18 years and I use and have used inkscape for a large variety of print & digital graphics for the association. I think I started using Inkscape around 2005 or so - mostly for my own personal pet project images and graphics, but around 2010 or so I started to use Inkscape heavily for the Canadian Iaido Association. Here is a small list of what I've made with Inkscape: 1) Certificates (something to give to students who pass grading as a memento for yearly seminars). This involves Japanese kanji, hiragana, and katakana - along with some raster graphics which were unavoidable. I have used a plugin to add print marks which I then send off to a printer to print - my workflow for this has been working flawlessly for about 3-4 years. I export to PDF with some set values and I get really high quality printed certificates from a local print-shop. I use a unicode Japanese hiragana font I found online and vertical text. I have gotten many comments on how nice the certificates are. 2) Banners: one of which is ~15 feet long with Japanese text, English text, and our Canadian Iaido Association Mon (crest). Each of these was sent to another local printer who printed the graphics directly onto vinyl. We installed some grommets in the banner and we hang it and use it year after year for the seminar. 3) Graphics for our website: http://www.iaido.ca. All graphics on there beyond photos are created with inkscape - please don't judge the website! It was made in 2002! (It should be getting a new redesign in the near-ish future) 4) Tracing and converting an old raster image of the Canadian Iaido Association mon into a vector graphic (Worked great, converted the text to the proper fonts and was able to modify some Japanese kanji when our status in Japan changed) Overall, I highly recommend Inkscape for vector graphics - it has been an utter lifesaver that has allowed us to have professional quality results with zero cost beyond my volunteer time. I want to sincerely thank everyone who is involved in this project. In my opinion it's clearly a shining example of what the open source community can accomplish. Sincerely, Chris Tooley, 6Dan ZNIR (全日本居合道連盟) Secretary Treasurer, Canadian Iaido Association

4 4

An Inkscape Marketing Survey - Please Complete
by Ryan Gorley 07 Jun '17

07 Jun '17

Hello all, We all love Inkscape, and we all would love to see it used by more people. Please help those of us focusing on its marketing do that by identifying *who* you think those people should be and *why*. This survey is short and simple, but please explain your response as thoroughly as you have time. The survey can be found here: https://goo.gl/forms/ReZkSjOMokkaoSln2 Thanks a lot for your involvement! Ryan Gorley @ Dijt <https://dijt.co/>

1 0

how do I draw a donut?
by ToddAndMargo 06 Jun '17

06 Jun '17

Hi All, I am trying to draw a no parking sign. A red circle with width (donut) with a red slash through it. The I will add text of choice ("No Crabby Bosses", etc.). I guess w So far I can draw a solid circle, but I only want the circle to have width. How do I do this? Many thanks, -T -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ When we ask for advice, we are usually looking for an accomplice. -- Charles Varlet de La Grange ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

2 5

gcode tools support lacking
by brynn 06 Jun '17

06 Jun '17

Hi Friends, It's been well over a year since the team who created Inkscape's gcode tools, have answered requests for support in their forum, cnc-club (see link in Extensions menu > Gcodetools > About). There currently are not any users who participate in forums, who understand these tools who are apparently interested in helping. Is there anyone in the community who would be willing to be contacted (in lieu of regularly visiting forums) with questions about the gcode tools, when they come up (which is more and more lately)? Or does anyone know of any resources, such as tutorials? I only know of one...oh great, and I guess I've misplaced the link. But it's fairly limited. (I've even offered to write tutorials for the gcode tools, if the cnc-club forum would collaborate - no answer.) Personally, if the community can't provide support for our own tools, well.... I guess I'd have to start refering users elsewhere, for producing the gcode. Some have already started referring elsewhere (http://www.inkscapeforum.com/viewtopic.php?f=31&t=32491) Of course I don't want to do that. But this is a frustrating. Can the development community provide any guidance? Thank you very much, brynn

2 4

last used style
by brynn 01 Jun '17

01 Jun '17

Hi Friends, I've been trying to get my nerve up to ask about this, since I first used Inkscape, 10 years ago. So here goes. Can anyone give me a good reason for having all the tools styles set, by default, to last used style? In 10 years, I have never met, seen, or heard of anyone who needs this feature; while we have to answer this same general problem for newbies over and over and over again. Countless times I've answered these messages. I'll bet I don't even need to give examples, do I? I would guess it's the single biggest stumbling block for newbies. It certainly must be the single most asked question by newbies. At least in forums, and probably LP Answers. I can imagine rare scenarios, where someone might actually use this feature. But if I want an object the exact same style as the one before, I simply duplicate (or copy/paste, or paste style). So it's a mystery to me why last used style should be the default behavior, when we have all these other perfectly suitable features, which don't cause newbies (and those who help them) so many headaches. I understand if we might not want to throw it out the window ((although that's what I would do with it, haha)). But is there any chance we could at least not have it to be the default behavior? When we first download and open Inkscape for the first time, all the tools have a characteristic style. If I recall, it's a pink rectangle, light blue circle, yellow star, and green spiral, with darker tones for the strokes, and all partially transparent. And for Pencil and Pen, I guess it's the black stroke. Could we just keep those styles, but set all the tools for "This tool's own style" instead of "Last used style"? And could we have this the default behavior for when newbies first install Inkscape? Oh, it would save us SO, so much time, those of us who answer newbie questions, day in and day out. I'd be so happy to write up a bug/feature request report for this, if there isn't some serious objection. Thanks for listening, brynn

2 1

Scribus 1.5.3 released
by "Christoph Schäfer" 29 May '17

29 May '17

The Scribus Team is proud to announce the release of development release 1.5.3, another major step on the way to Scribus 1.6.0. In addition to being a milestone in terms of typographic features, the Scribus Team is convinced that 1.5.3 has become stable enough to be used in new workflows and documents in a similar way to the transition from 1.3.3.x to 1.4.0 after the release of version 1.3.6. However, care must be taken, because this is still a development release. Scribus 1.5.3 is very fast and has been thoroughly tested. Generally, everything that works reliably in 1.4.x also works in 1.5.3, but it's faster and more versatile. On top of that, it includes additional and already overwhelmingly reliant features galore. Most Important Changes ====================== - The most important change isn't immediately visible, namely a completely rewritten text layout engine, which supports complex scripts like Arabic, Hindi or Thai, as well as providing access to advanced OpenType features, such as ligatures and alternate glyphs. - Altogether, about 500 languages and/or scripts are supported. Please note that as of version 1.5.3, Scribus is supposed to render these diverse writing systems, which still needs thorough testing by those who are familiar with them. - Typing on the canvas and text rendering in general has become a lot faster. - Previews for fonts are now available in font selectors. - The "Text" tab has been removed from the Properties Palette and is now a separate UI palette. - The performance of copying and pasting objects in/from/to files with huge color palettes has been vastly improved. - An import filter for Krita's KRA format has been added. - Scribus now follows the XDG standard for configuration files. Therefore, the Scribus preferences directory has moved from ~/.scribus/ to a new default location: ~/.config/scribus/ - Color selectors display the color values as a tooltip. - A longstanding problem with the launch option for an external image editing program has been resolved. Until version 1.5.3 it was necessary to manually close the external program before it could be started again from within Scribus. This is no longer necessary. - The "Wikipedia RAL Classic" color palette has been updated, this time using Wikipedia's LAB color values. - A script called "Caption" has been included, which adds a text frame to an image frame, based on the latter's proportions. - The "Autoquote" scripts now supports inverted guillemets via the "de-g" parameter. - Code improvements have been made based on recommendations from using both the Coverity scan tool (https://scan.coverity.com/) and the "clazy" tool (https://github.com/KDE/clazy). These changes improved efficiency, removed bugs and improved security. - Countless bugs, mostly introduced with the new features in earlier releases of 1.5.x, have been fixed. For details see the 1.5.3svn changelog (https://bugs.scribus.net/changelog_page.php?version_id=102) New Dependencies ================ - As of version 1.5.3, the minimum Qt version to compile the program is 5.5. - harfbuzz and libicu, as well as the related development packages are now required. Caveats - Some newly introduced features, like footnotes, may not function as desired, at least not yet. - The file format may undergo some changes between the current release and 1.6.0, so we advise caution when it comes to workflows that use automated document generation or parsing. - Vertical writing systems aren't supported for the time being, but support will be added in a later release. - The Online Help hasn't been completely updated, and it won't be until the final 1.6.0 release. Special Credits =============== - This version builds significantly on the code from 1.5.2 with the work that the Oman House of Open Source Technology team, led by Khaled Hosny, delivered. - 1.5.3 uses all of the remainder of the code, and we have Fahad Al-Saidi to thank for his continued work and especially for the bug triaging and code changes. - Andreas Vox introduced a layout cache to speed up text rendering. - William Bader has fixed the issue of launching several instances of an external image editing program. - Contributions to GUI translations via participants on the Transifex translation platform Primary Download Locations ========================== - Installation packages for Windows, Mac OS X, a Linux AppImage and the source code are available here: https://sourceforge.net/projects/scribus/files/scribus-devel/1.5.3/ - Fedora and CentOS RPMs: http://download.opensuse.org/repositories/home:/mrdocs - OpenSUSE, SLED, and SLES RPMs: http://download.opensuse.org/repositories/home:/mrdocs - Packaging for other Linux distributions, *BSD, Solaris and OpenIndiana is beyond our influence. We recommend updating the respective repository data on a regular basis. - Windows Portable App: http://portableapps.com/apps/office/scribus_portable#test Download Verification ===================== Please visit the official announcement on https://wiki.scribus.net/canvas/1.5.3_Release for Sha256 and Sha1 checksums. Expectations for Scribus 1.5.4 ============================== - An entire rebuild of the palette system used in Scribus, enabling a cleaner and more flexible GUI - Updates to dependencies, with a likely increase to Qt 5.6 - Migration of build systems or targeted versions of operating systems to later versions Credits ======= The Scribus Team would like to thank Anduin.net and Modirum for their continued hosting of all of the Scribus websites. We are grateful to the Organisation Internationale de la Francophonie and Linux New Media (Germany) for sponsoring. The Scribus Team is also honored to have Resene Colours (New Zealand), dtp studio Oldenburg (Germany), Scientific Illustration Services Corp. (USA), the Newspaper Association of America (USA), Software Consulting Services (USA), freieFarbe e.V. (Germany), bauwerk Kommunikationsdesign (Germany) as Special Supporters and donors of color palettes and other content since the 1.4.x release, just like we are grateful to the owner of Vector Portal for the permission to distribute some of his work as Scribus Templates. Porting Scribus to OS/2 and eComStation is being supported by Serenity Systems (USA). Finally, the Scribus Team would like to thank the many end users, translators, testers and contributors who helped us with this release.

1 0

New landmine map for animated SVG
by Steve Litt 28 May '17

28 May '17

Hi all, I just created a new document illuminating the landmines to be encoutered when moving things around in an SVG document. It's at: http://troubleshooters.com/codecorn/svg_clickmaps/landmines_animated.htm SteveT Steve Litt May 2017 featured book: Twenty Eight Tales of Troubleshooting http://www.troubleshooters.com/28

1 0

SVGMatrix deprecated?
by Steve Litt 25 May '17

25 May '17

Hi all, I have a bunch of groups of class "screw", each comprised of a circle screwhead and a smaller square in the center called a screwsquare. In every instance of "screw", screwhead and screwsquare have identical x, y, height, width and r dimensions. Each screw's position is determined by the screw group's transform=translate(xadjust, yadjust). This is done automatically by Inkscape, and furthermore, it's easy to set manually with: myElement.setAttribute('transform','translate(xadjust,yadjust)'); The trouble comes in when you want to *get* that transform. Getting the transform is necessary when you want to move element whatever2 in relation to the location of screw1. Getting the translation is one of the worst documented things I've seen, but the concensus seems to be something like the following (for my screw case where the group has the transform): =============================================================== function screw_coords(screw){ matrix = screw.transform.baseVal.getItem(0).matrix; var coords = []; shead = screw.querySelector('.screwhead'); coords[0] = shead.cx.animVal.value + matrix.e; coords[1] = shead.cy.animVal.value + matrix.f; return(coords); } =============================================================== The preceding is ugly and fragile for a whole number of reasons, it's inobvious and horribly undocumented. But the real problem is it appears to be deprecated: https://developer.mozilla.org/en-US/docs/Web/API/SVGMatrix The preceding article says not to use SVGMatrix, and to update code as soon as possible, but remains mute on what you use instead. How the hell do you read a translation? It's a mystery. The following article gives a crazy train regex kludge method to read a translate: https://stackoverflow.com/questions/10349811/how-to-manipulate-translate-tr… If anybody knows the proper secret handshake to read a translate in a non-deprecated, browser independent, non-kludgificent way, please let me know, perhaps with some URLs of docs for such a functionality. Thanks, SteveT Steve Litt May 2017 featured book: Twenty Eight Tales of Troubleshooting http://www.troubleshooters.com/28

3 3

telegram inkscape
by Jabier Arraiza 22 May '17

22 May '17

Hi all anyone has get the t.me/inkscape from telegram direction. Its cool if can delete the acount and the url reserved and send to inkscape board to manage it. Whith this inkscape community has the best link to telegram services we want to add in the future. Thanks so much in advance.

3 6

Manuals: Inkscape Beginners' Manual ready for translation to English and editing
by Maren Hachmann 17 May '17

17 May '17

Hi everyone, join us for translating and editing the Inkscape Beginners' manual, which is based upon Elisa de Castro Guerra's French book "Initiation à Inkscape" (Original French version available at https://www.flossmanualsfr.net/initiation-inkscape/ - don't translate this one ;-) ) ! Thank you, Elisa, for sharing your work and helping with licencing (also for joining the admins)! The plan is to translate the book from French to English (Sylvain and Hinerangi already did some of the work), and make adjustments as we see fit, then to make it available for people who only start using Inkscape - if possible, accessible directly from inside the Inkscape program. Here are some notes to get you started (we may tweak processes later, if we find better ones): Platform usage ============== This book is written at flossmanuals.net, which is a website that allows for collaborative editing of books about Free/Libre and Open Source Software. To learn more about the community that's behind it, please visit http://www.flossmanuals.org/about-floss-manuals-foundation. The manual for this 'manual writing platform' (which is an instance of the Booktype software), is available at http://sourcefabric.booktype.pro/booktype-16-for-authors-and-publishers/ . Joining ======= Join the group at http://write.flossmanuals.net/groups/beginners-manual-for-inkscape/ :-) Also say hi on the docs mailing list (see below, section "Communication", so we know who is who, and what you can help with. Editing ======= IMPORTANT: When you're editing the book, ALWAYS leave a screen either by clicking on the 'Cancel' or on the 'Save' button. This is because, if you leave it by just closing the tab in your browser, the chapter will stay locked and inaccessible for other editors. Version ======= This book will refer to the Inkscape 0.92.x series (important for your screenshots!). Writing Style ============= This book is meant as an introduction for people who are not yet familiar with Inkscape terminology. When deciding how to phrase something, think of yourself when you started to use a vector editor, or think of a teen who you would like to introduce to the program, and who you would like to enjoy the process, and to be able to make nice drawings after reading the book. Stay on topic, make it easy to understand, and keep the learning curve shallow. Write less rather than more. Be nice and encouraging to the reader. There exists another manual that provides the deep, technical details. We need to keep in mind that it will also be read by people whose native language is not English. Communication =============== Anyone who edits the book can exchange messages, files and snippets via chat with other users who are online at the same time. For discussions of wider interest, or when you hit an obstacle, please subscribe and send a message to the inkscape-docs mailing list at https://sourceforge.net/p/inkscape/mailman/inkscape-docs/ . Currently, we have 4 book admins (Elisa, Brynn, CR and me). Admins can change the book settings, add other admins and create release versions. Chapter status ============== Chapters move from one status to the next, when they're being worked on: 1. needs translation: Chapter isn't (fully) translated yet. If you speak both French and English, this is where your help is needed! This step only requires you to work on the text. You can ignore any images. 2. to be proofed: Chapter is translated, and needs to be checked by someone other than the translator, to spot errors and do some polishing. If English is your native language and you're good with words, grab this job! 3. needs images: The chapter contains images, but those are still French. Either it's just their file names that need to be changed (Workflow: download image, rename it on your computer, reupload, change link in the Chapter(s), provide meaningful alt text, delete French image) or a new screenshot is needed from the English interface. If you know how to do these things, please jump right in! (Hint: all image links follow this scheme: static/image_file.ext) 4. completed: This chapter is more or less finished. Concentrate your effort on the other ones :) If you spot a mistake or typo, improvements are still possible, of course. Important: Don't forget to update a chapter's status, after you have worked on it ;-) When you've got a great idea that would introduce a major change in the book's structure, please confer with other editors on the mailing list to see what they think about this. Cover ===== If you're good at creating meaningful art, then we need you for creating a cool cover image that shows what you can do with Inkscape and is inviting for beginners. Read more about the Cover Manager in Booktype at http://sourcefabric.booktype.pro/booktype-16-for-authors-and-publishers/_dr…. Let us know about your plans on the mailing list (see section about Communication). Styling and Customization ====================== If you know your CSS, you can help by improving the book's styling. You can read all about customization for different output formats and the front page in the design section of the Booktype manual at http://sourcefabric.booktype.pro/booktype-16-for-authors-and-publishers/for…. For the book to appear on the flossmanuals.net frontpage, the steps outlined here are required: http://write.flossmanuals.net/floss-manuals-workflow/_draft/_v/1.0/how-do-i… , section "Publish new details..." License ======= This book is licensed under the Creative Commons Attribution 4.0 license (CC-By 4.0, see https://creativecommons.org/licenses/by/4.0/). By contributing to this book, you agree to publish your content under this license. As a contributor, please add your name to the list in the 'About this Book' chapter. This chapter will *always* be in need of new content ;-) Go! === Have fun working on the book at http://write.flossmanuals.net/start-with-inkscape/_edit/# You will find a copy of these notes in the 'Notes' tab, and you will find me working on translating French -> English there, in the late evenings (CEST). See you there, Kind Regards, Maren

2 4

How to make an *SVG* connector?
by Steve Litt 14 May '17

14 May '17

Hi all, I want to be able to make an *SVG* connector that doesn't rely on the facilities of Inkscape to do its thing. According to this URL there is such a thing: https://dev.w3.org/SVG/modules/connector/SVGConnector.html#ConnectorElement When I make a connector in Inkscape using the little connector symbol, in XML it shows up as a path, not a connector, and it has inkscape:connector-type. When I save as plain SVG, the inkscape:connector-type goes away, and it's nothing more than a line segment. How do I make a real SVG connector in Inkscape? Thanks, SteveT Steve Litt May 2017 featured book: Twenty Eight Tales of Troubleshooting http://www.troubleshooters.com/28

5 6

How to get rid of groups' transform=translate()
by Steve Litt 14 May '17

14 May '17

Hi all, So I managed to get a line segment to route itself between 2 circles. But if the 2 circles are in a group, and the group's been duped, the circles have the same cx and cy and their group has a different translate(). Ugh! I have to dup groups because I want to input onclick, onmouseover, onmouseout, and class only once on the group. Does anyone know how a group's translate() can be incorporated into its component paths' and circles' x and y or cx and cy so getting a location is as simple as reading cx and cy, rather than doing all sorts of arithmetic with the parent's translate()? Thanks, SteveT Steve Litt May 2017 featured book: Twenty Eight Tales of Troubleshooting http://www.troubleshooters.com/28

2 1

Re: [Inkscape-user] Problem with Image Sizing in Inkscape 0.92
by C R 12 May '17

12 May '17

It's because svg was designed as a web format and according to the wiki: "Eventually, after long arguments, the CSS working group dictated that one inch would be fixed to 96 pixels regardless of screen resolution" Yea, that's the insanity we are stuck with. Pixels being units of physical measurement. The cure is to never, ever under ANY circumstances uses pixels as a unit of measurement. It was always a bad idea, but since svg was meant to contain css it's kinds what we are stuck with if we want to be/stay compatible with web standards... even the ones that make no goram sense. :) Note: Inkscape still correctly will output your vectors at any dpi you wish, but pixels should always be calculated based on a physical measurement (metric or imperial), and pixels calculated as a dpi. This is not a problem that will go away. The CSS working group will no doubt decide to haphazardly change it again because "retina" displays are so popular, in which case it will probably be 300px / inch. It doesn't matter though. If you're using pixels to calculate witdth, you will have to expect that the width will change based on the pixel size of your output, so best thing is to not do that again in the future. Here's the scoop on units in Inkscape: http://wiki.inkscape.org/wiki/index.php/Units_In_Inkscape -C On Fri, May 12, 2017 at 9:46 PM, Mick Ralph <mick.ralph@...3070...> wrote: > As the background to my problem, I use Inkscape to prepare drawings > of sides and ends, etc, to be made into model railway carriages. The > designs are then opened in the Designer Edition (DE) of Silhouette > Studio for cutting out of styrene sheet on the Silhouette Portrait > cutting machine. DE can open SVG files, as created with Inkscape. > > For Inkscape 0.48 and 0.91, this works fine and the parts are cut to > the same size as the Inkscape drawing, although it is necessary to > ensure that the document properties are set to "default units" of mm > and "custom size" "units" of px; if custom size units are left as mm, > then the actual size of a part decreases from (say) 110mm to about > 88mm. I created a new default template with these properties to > ensure that the Inkscape drawings would always cut at the right sizes. > > When Inkscape 0.92 was released I downloaded it and I have just used > it to draw out another carriage. I then opened the svg file in DE > and without examining it, sent it to the cutter. The parts seemed > too small. I then realised that the default template was no longer > in mm/px, but was now in mm/mm. When I altered the document > properties back to mm/px, I opened the file in DE and examined the > size of the parts. I now find that the part which should have been > 110mm is now about 117mm. > > This is clearly useless for making scale models. I opened in v 0.92 > a file which was originally created in Inkscape 0.91 and received the > message that the original file was drawn at 1 inch = 90 px, but the > new version uses 1 inch = 96 px. As a user rather than a developer, > I do not understand the reason for this (nor do I need to understand > it) - I just need to know that if I draw a line 100mm long it will > cut at that length, as in the earlier versions. > > As I can see no option in v 0.92 to allow compatibility with earlier > versions, it seems that I will have to reload v 0.91 and use that to > create my drawings. > > Is there a compatibility option to allow drawings to be made at 90px > per inch in v 0.92? > > Mick Ralph > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Inkscape-user mailing list > Inkscape-user(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/inkscape-user

1 0

Re: [Inkscape-user] Problem with Image Sizing in Inkscape 0.92
by Maren Hachmann 12 May '17

12 May '17

Hi Mick, the change was necessary to be compatible with CSS standards. When you open the file with Inkscape, it will offer to scale it in that dialog where it tells you about the changed size, which intends to make the file compatible again. In your specific case, the option "Scale elements" will hopefully do what you need. Can you try that? Kind Regards, Maren Am 12.05.2017 um 22:46 schrieb Mick Ralph: > As the background to my problem, I use Inkscape to prepare drawings > of sides and ends, etc, to be made into model railway carriages. The > designs are then opened in the Designer Edition (DE) of Silhouette > Studio for cutting out of styrene sheet on the Silhouette Portrait > cutting machine. DE can open SVG files, as created with Inkscape. > > For Inkscape 0.48 and 0.91, this works fine and the parts are cut to > the same size as the Inkscape drawing, although it is necessary to > ensure that the document properties are set to "default units" of mm > and "custom size" "units" of px; if custom size units are left as mm, > then the actual size of a part decreases from (say) 110mm to about > 88mm. I created a new default template with these properties to > ensure that the Inkscape drawings would always cut at the right sizes. > > When Inkscape 0.92 was released I downloaded it and I have just used > it to draw out another carriage. I then opened the svg file in DE > and without examining it, sent it to the cutter. The parts seemed > too small. I then realised that the default template was no longer > in mm/px, but was now in mm/mm. When I altered the document > properties back to mm/px, I opened the file in DE and examined the > size of the parts. I now find that the part which should have been > 110mm is now about 117mm. > > This is clearly useless for making scale models. I opened in v 0.92 > a file which was originally created in Inkscape 0.91 and received the > message that the original file was drawn at 1 inch = 90 px, but the > new version uses 1 inch = 96 px. As a user rather than a developer, > I do not understand the reason for this (nor do I need to understand > it) - I just need to know that if I draw a line 100mm long it will > cut at that length, as in the earlier versions. > > As I can see no option in v 0.92 to allow compatibility with earlier > versions, it seems that I will have to reload v 0.91 and use that to > create my drawings. > > Is there a compatibility option to allow drawings to be made at 90px > per inch in v 0.92? > > Mick Ralph > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Inkscape-user mailing list > Inkscape-user(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/inkscape-user >

1 0

Problem with Image Sizing in Inkscape 0.92
by Mick Ralph 12 May '17

12 May '17

As the background to my problem, I use Inkscape to prepare drawings of sides and ends, etc, to be made into model railway carriages. The designs are then opened in the Designer Edition (DE) of Silhouette Studio for cutting out of styrene sheet on the Silhouette Portrait cutting machine. DE can open SVG files, as created with Inkscape. For Inkscape 0.48 and 0.91, this works fine and the parts are cut to the same size as the Inkscape drawing, although it is necessary to ensure that the document properties are set to "default units" of mm and "custom size" "units" of px; if custom size units are left as mm, then the actual size of a part decreases from (say) 110mm to about 88mm. I created a new default template with these properties to ensure that the Inkscape drawings would always cut at the right sizes. When Inkscape 0.92 was released I downloaded it and I have just used it to draw out another carriage. I then opened the svg file in DE and without examining it, sent it to the cutter. The parts seemed too small. I then realised that the default template was no longer in mm/px, but was now in mm/mm. When I altered the document properties back to mm/px, I opened the file in DE and examined the size of the parts. I now find that the part which should have been 110mm is now about 117mm. This is clearly useless for making scale models. I opened in v 0.92 a file which was originally created in Inkscape 0.91 and received the message that the original file was drawn at 1 inch = 90 px, but the new version uses 1 inch = 96 px. As a user rather than a developer, I do not understand the reason for this (nor do I need to understand it) - I just need to know that if I draw a line 100mm long it will cut at that length, as in the earlier versions. As I can see no option in v 0.92 to allow compatibility with earlier versions, it seems that I will have to reload v 0.91 and use that to create my drawings. Is there a compatibility option to allow drawings to be made at 90px per inch in v 0.92? Mick Ralph

1 0

moderators needed for the website
by brynn 12 May '17

12 May '17

Hi Friends, Thanks to Martin for creating the most amazing moderation system I've ever seen, for the website. Now that it's ready, volunteers are invited to join the website Moderation Team. Moderators work together to make decisions about each reported item (image, comment or member). No particular skills are needed. The biggest qualification is to care about maintaining the website as a beautiful and safe place for members to show their Inkscape work and interact. Most days you would only need to spend 15 to 20 minutes or less, although in the beginning, a little more time will probably be needed to become familiar with the system. And visit as many days as you can. The more moderators we have, the less time we each have to spend moderating. If you're interested in helping, please go to Community tab > Teams page (https://inkscape.org/en/teams/) and click on "Moderation Team". On the next page, click to request to join the team. (Sorry, I don't know exactly what the text is, for that link, but it will be regular size text, and orange color). After that, we'll contact you, and get you started. Thanks for your interest in contributing to the Inkscape Project :-) All best, brynn

1 0