- Inkscape Users - Inkscape Mailman

Importing eps image.
by John Culleton 22 Jun '10

22 Jun '10

I want to import an eps image that is 15in wide x 12 in high. Even if I preset the page size to those numbers the import reverts to 8.5 x 11. Inkscape 0.48 rev 1. -- John Culleton Wexford Press "Create Book Covers with Scribus" Printable E-book 38 pages $5.95 http://www.booklocker.com/books/4055.html

1 0

Inkscape 0.48pre1
by Ted Gould 21 Jun '10

21 Jun '10

Hello, I pleased to announce the tarballs representing the 0.48pre1 release of Inkscape. This is one of the final stops on the rapid road to release. Please look at this release to see if there are any show stopper issues for the 0.48 release. == Download == https://sourceforge.net/projects/inkscape/files/inkscape/0.48pre1/ bzr get lp:inkscape -r tag:INKSCAPE_0_48_PRE1 [1] == SHA1 Sums == 8e4eb561ae5fd8bfbc9c7149f3c0ef3115454cb5 inkscape-0.48pre1.tar.bz2 353b2e1dbc12773a0444b97c6bab1fd7dd632c04 inkscape-0.48pre1.tar.gz 5f64dfe8e9c01e600b52f5b3c33b9325a5cd42f7 inkscape-0.48pre1.zip --Ted [1] Is the Bazaar tag useful? I threw it in there because I thought that might be easier for some folks, but I'm not sure. Thoughts?

3 3

language problem
by Hago Ziegler 18 Jun '10

18 Jun '10

Hi, if I put the cursor over one of inkscapes tool-icons, a line pops up, that describes the function of the tool. I would like to know, how this sort of pop-up-line is called in english. In only one of this pop-up-lines I found also the keyboard shortcut for the tool (shift-F2). I would like to ask the devellopers to put the keyboard-shortcut in the pop-up-line of every tool. It would help a lot to all the people who don't use inkscape every day. Thanks, Hago

3 2

0.48 alpha report
by John Culleton 12 Jun '10

12 Jun '10

Downloaded the 0.48 alpha package and started to play with it. My first interest was the capability to use CMYK colors. Before 0.48 the doctrine was that you could use three out of four CMYK colors but not 4 out of 4. With 0.48 as you move one CMYK slider one of the others tends to jump back to zero but not always. By fiddling some I was able to establish rich black at 60,40,40,100. Given that internally Inkscape is still using the RGB color model I wonder if this is a color that will actually be used for output. There are several swatch bars available but none seem to be expressed in CMYK terms. If in fact all possible CMYK colors can be expressed in RGB terms then it should be possible to use pseudo CMYK colors on the Inkscape color bar and pass these shades on to e.g., Scribus in RGB format. I would be interested in comments from the developers on this. -- John Culleton Wexford Press "Create Book Covers with Scribus" Printable E-book 38 pages $5.95 http://www.scribd.com/doc/24676863/ http://www.booklocker.com/books/4055.html

2 3

problem (bug?) while importing LilyPond pdf in inkscape 0.47 / osx 10.6.2
by josé henrique padovani 12 Jun '10

12 Jun '10

Hi, I'm trying to import some pages of pdf files generated with LilyPond. I need to import the scores as pdf, ps or eps because there are built-in postscript drawings that could not be generated by LilyPon's svg backend. I have made a copy of LilyPond OTF fonts into /Library/Fonts (have also tried ~/.fonts and ~/Library/Fonts)... (the files are: CenturySchL-Roma.otf CenturySchL-Bold.otf CenturySchL-BoldItal.otf CenturySchL-Ital.otf emmentaler-11.otf emmentaler-13.otf emmentaler-14.otf emmentaler-16.otf emmentaler-18.otf emmentaler-20.otf emmentaler-23.otf emmentaler-26.otf emmentaler-brace.otf) I can use these fonts if I start a new document in InkScape, but it fails to find the fonts if I try to open or import a pdf page. It seems to be an "import" issue, because I can open these files in Illustrator (I don't want to use it) and the fonts are recognized by the inkscape if I try to create new texts... Could it be a Inkscape/import bug? Does anyone have any suggestion about how to load the ps/pdf/eps lilypond documents? thanks, josé -- http://zepadovani.info

1 0

Further requests for assistance with Python extensions
by Jon 10 Jun '10

10 Jun '10

I'm now in the process of optimising and documenting my Inkscape extensions that implement the International Orienteering Federation mapping standards. There are some areas of the extensions that I would like to improve to make them more universal / intuitive. 1) Currently, a number of my routines apply formatting and patterns of tags or dots to paths (strokes). I would like to extend the routines to also be compatible with rectangles and arcs / ellipses. I assume that the routines to do most of what I want already exist in one or other of the 'helper' files like cubicsuperpath, pathmodifier and simpletransform, but as yet I've not worked out how to make them work for me. I need to understand how to implement the following from within a Python extension: a) Convert a rectangle to a path. Will rectToPath in pathmodifier do this and, if so, what do I need to provide for self amd node? b) Convert an arc/ellipse to a path. Will ArcToPath in cubicsuperpath do this and, if so, what do I need to provide for p1 and params? 2) I also need to understand how to apply a transform to a path (i.e. embed the transformation into the path so the transform is not required) so that effects applied to a heavil transformed path (as can happen when using ellipses / arcs) are applied correctly. Will one of the routines in simpletransform do what I want and, if so, which one and what would I need to supply to it? 3) I still need to provide the capability via an extension to convert a line into two lines of a given line width and a set distance apart. This will need to work with curved paths, both open and closed. The way that I would do this manually in Inkscape would be to create a stroke, duplicate it, set the widths of the two strokes such that the lower is the width of the two lines plus the gap and the upper is the width of the gap, convert both strokes to paths using Path - Stroke to Path and then to use the Path - Difference function to leave two lines of the required width and separation. How could I go about recreating this from within a extension? Is there an easier method to do this, given that the two lines should not be joined at the ends? Still outstanding from a previous request are a couple of unanswered questions (rephrased): 4) Ho would I go about detecting whether a point lies within the bounds of a closed shape passed to a Python extension? Is there an existing routine in one of the Python extension 'helper' files that can do this? 5) How would I go about implementing a method to detect collision / distance between dots from within an extension? I'd like to implement something similar to the 'Remove Overlaps' capability available within the 'Align and Distribute' dialog as part of the routine generating the dots, but with a single (polar - sqrt(x^2 * y^2)) variable related to the user-selected dot density determining how close the dots can be placed to each other. I can see that this could get complex when the area, and hence the number of dots, gets large. With regard to these last two, I believe there may be something possible using py2geom, but where do I find details of this? What are its capabilities and are they documented anywhere? ----- Jon

2 1

Inkscape 48
by John Culleton 10 Jun '10

10 Jun '10

I have Inkscape 47 installed on my Slackware Linux 13 system. Is Inkscape 48 stable? If so how do I download the source? If it is not stable what is the address for the svn version of Inkscape? I update Scribus nightly so I might as well do the same for Inkscape. -- John Culleton Wexford Press "Create Book Covers with Scribus" Printable E-book 38 pages $5.95 http://www.scribd.com/doc/24676863/ http://www.booklocker.com/books/4055.html

2 2

Unexpected behavior in Inkscape 0.47
by Steve Litt 09 Jun '10

09 Jun '10

Hi all, I ran into some unexpected behavior in Inkscape 0.47, running on Ubuntu 9.10 32 bit. When you duplicate and move diagram connectors, they don't move as expected. This happens on diagrams whose page size and/or orientation has been changed, and doesn't happen when the page size and orientation have never been changed. SYMPTOM REPRODUCTION * Open a new diagram * Create a diagram connector * Click the "select and transform objects" button * File->Document_properties->Page_orientation, change to landscape * Select the diagram connector * Ctrl+D to duplicate * Shift->Right The Shift->right moves the new connector down instead of right. From my perspective this is unexpected behavior and indeed when the page size is left at default, shift->right moves the connector right as expected. MECHANISM OF THE ANOMALY When you change the paper orientation, it puts a "transform="translate(0,-308.2677)" attribute within the <g> node of the Inkscape XML. If you remove that attribute, the anomaly goes away. If you put the attribute back, the anomaly returns. WORKAROUND When starting a new document, do any paper size and orientation settings immediately on the blank diagram, then remove all transform=translate attributes and save. Diagram connectors will then work normally on the drawing as long as the paper size and orientation aren't changed. I have no idea what side-effects this workaround would create, but I haven't observed any. WHAT I'VE DONE This looks to me to be something like bug number 479553, "Moving shape with connectors, connectors go wild", so I appended my findings to that bug report (https://bugs.launchpad.net/inkscape/+bug/479553). MY QUESTIONS: * Is this a known problem? * Is anyone working on it? * Is this fixed in later versions than 0.47? * Is this considered a bug? * What side effects occur when deleting transform=translate attributes? * Can anyone else reproduce this behavior? * Is the problem that the transform=translate shouldn't be there, or is the problem that connectors don't properly respond to the transform=translate? * Is there anything I can do to help get this behavior fixed? Thanks SteveT Steve Litt Recession Relief Package http://www.recession-relief.US Twitter: http://www.twitter.com/stevelitt

3 3

Justification of text on an arc?
by Jim Ford 07 Jun '10

07 Jun '10

Hi If I draw an arc and some text, select them both and then Text->Put on Path, I get the text 'left' justified on the arc. I would like the text _centre_ justified. How do I go about it, please? Jim

3 4

Re: [Inkscape-user] Extracting sub shapes from bitmaps
by John LeMasney 04 Jun '10

04 Jun '10

William, it would help to see the bitmap or converted path to see if what I'm suggesting will work, but it was scrubbed. Here's what I would suggest. Make sure that your converted bitmap is indeed a single path. You will get feedback about this in the taskbar when you select the object. If it says '1 group' or "two paths" or anything else selected, you must ungroup, etc, until you have a single path. A single path can of course have many many separated shapes in it with space in between them Then, in the path menu, choose 'ungroup'. You should then see your shapes separated into a series of selection boxes all selected at once. Click away with the selector, then select individual circles. If you have overlapping circles, they will become a single object in a single path. Hope this helps. John LeMasney, 365sketches.org On June4 2:57 PM, inkscape-user-request(a)lists.sourceforge.net wrote: > > Message: 3 > Date: Fri, 4 Jun 2010 13:57:26 -0500 > From: William Oquendo<woquendo@...155...> > Subject: [Inkscape-user] Extracting sub shapes from bitmaps > To: inkscape-user(a)lists.sourceforge.net > Message-ID: > <AANLkTilKg97UD0k_C0aXzFLPpyT_kKeiBi6rAPxAvJf5@...156...> > Content-Type: text/plain; charset="utf-8" > > Dear all, > > I have a bitmap with many circles inside it, and I would like to manipulate > each circle individually. I have already converted the bitmap to svg by > using Trace Bitmap inside inkscape, but I dont know how to "ungroup" the > vectorized figure and manipulate the circles individually. > > I would like to know if I can do that in inkscape and how. I am attaching an > example bitmap. > > Thanks in advance. > > Best regards / Cordialmente, > > -- > William Oquendo > Phd Candidate > Simulation Of Physical Systems Group > National University of Colombia > Linux User # 321481 > ********************* > Este correo puede carecer de tildes o e?es ya que el teclado no contiene > estos caracteres. Presento excusas por eso. >

2 1

Extracting sub shapes from bitmaps
by William Oquendo 04 Jun '10

04 Jun '10

Dear all, I have a bitmap with many circles inside it, and I would like to manipulate each circle individually. I have already converted the bitmap to svg by using Trace Bitmap inside inkscape, but I dont know how to "ungroup" the vectorized figure and manipulate the circles individually. I would like to know if I can do that in inkscape and how. I am attaching an example bitmap. Thanks in advance. Best regards / Cordialmente, -- William Oquendo Phd Candidate Simulation Of Physical Systems Group National University of Colombia Linux User # 321481 ********************* Este correo puede carecer de tildes o eñes ya que el teclado no contiene estos caracteres. Presento excusas por eso. *********************

1 0

SVG Open 2010 conference - Last Call for an Inkscape contribution
by Andreas Neumann 04 Jun '10

04 Jun '10

Hi all, As every year we are organizing the SVG Open conference (http://www.svgopen.org/2010/). This year it takes place from August 30 to September 1 in Paris. Inkscape was always present in the past couple of years through presentations of Jon Cruz, one time also a keynote. His contribution was always one of the highlights of the conference. Inkscape is the most powerful SVG editor we have at hand. It would be very nice if the Inkscape project would be represented at the conference. I am sure there are plenty interesting aspects in Inkscape that would be worth being presented at the conference. If you live close by and have time and interest in presenting Inkscape, both from a developer, but also from a designer/user point of view, you are still welcome to submit a short abstract until June 9. The official abstract submission deadline is over, but we are still accepting late interesting submissions. If you are interested, please submit an abstract at https://www.svgopen.org/2010/registration.shtml (you first have to preregister) or ask me questions, if any. I would hope that the Inkscape project could be present at the conference. Thanks, Andreas

1 0

Power Stroke discussion
by unknown＠example.com 01 Jun '10

01 Jun '10

Hi all, This summer, Zhenfeng will work on a new "variable stroke width" LivePathEffect, called "Power Stroke". Now that Zhenfeng has started his GSoC, I'd like all who are interested to join the discussion on this page: http://wiki.inkscape.org/wiki/index.php/PowerStroke#Discussion_at_LGM_20 10. Already I got some great input at the Libre Graphics Meeting in Brussels last week. More input is always welcome. Thanks a lot! Johan

1 0

Possibilities with Inkscape extensions
by Jon 31 May '10

31 May '10

I've now nearly completed my project to implement the International Orienteering Federation mapping standards in Inkscape - three mapping standards, one of which has two symbol scales - which has resulted in a large number of extension files. In order to simplify things, I'd like to be able to have, for a given subset of the symbols, four separate INX files each calling the same PY file where a parameter is passed to the PY file, not user selected, indicating which INX file has made the call. Is this possible? Is it possible to specify a variable in an INX file and ascribe a value to it without presenting the user with some form of parameter input? Also, I'd like to be able to produce a routine to fill an inkscape closed shape with randomly sized (between a lower and upper size) and positioned dots where the user can alter the density of dots and where dots will not overlap / touch / be closer than a specified distance between them. This raises a number of questions: 1) Is it possible to specify a slider-type input tool in an INX file? 2) Is there a Python command or a routine in one of the Python extension supporting files (simplepath, etc.) to detect whether a point lies within the bounds of a closed shape? 3) Is there an available routine to determine the area of a closed shape? 3) Are there any simple ways to detect collision / distance between dots? I'd like to implement something similar to the 'Remove Overlaps' capability available within the 'Align and Distribute' dialog as part of the routine generating the dots, but with a single (polar - sqrt(x^2 * y^2)) variable related to the user-selected dot density determining how close the dots can be placed to each other. I can see this getting complex when the area, and hence the number of dots, gets large. 4) Getting more complex, would it be possible to have a gradient-filled shape and vary the density of dots dependent on the gradient? ----- Jon

4 5

Expanding text
by George Farris 31 May '10

31 May '10

Hi All, I'm wondering if there are some good text tools in Inkscape or maybe the new .48 version. It seems very difficult to do things such as expanding text where for example the first letter of a word or sentence is say 10 points high and the last letter is 70 points high. Is this easily done? Inkscape seems awesome except for the text tools but maybe I'm missing something. It would be nice to convert a piece of text to one object and distort it accordingly. Not each letter as happens now. Any help or pointers greatly appreciated. Thank You George

6 10

Importing PDF loses some text characters
by Philip Rhoades 30 May '10

30 May '10

People, I you import the attached PDF - you will see that some characters are missing (eg look at words "Office*"). pdftotext extracts the text properly. I am using" inkscape-0.47-2.fc12.x86_64 -- Philip Rhoades GPO Box 3411 Sydney NSW 2001 Australia E-mail: phil@...2067...

3 3

Reviewing Inkscape 0.47 Illustrator’s Cookbook
by Akash Johari 19 May '10

19 May '10

Hi All, I am a Technical Editor working with Packt Publishing. We are coming out with the book on "Inkscape 0.47 Illustrator’s Cookbook". I am looking for a *Technical Reviewer* to provide feedback on the content of the book. It would be of great help if you would be willing to take it up as this is your area of expertise. When people like yourself, work for us as technical reviewers, we can be sure that the content will be of the highest quality. I should point out that there is no payment for reviewing, instead you will receive full credit in the book (including a bio where you can put up a link to your website or blog) and you will receive two complimentary books: · One copy of each book you review - see how what you've done makes you proud! · A book of your choice from our catalog. For more details on Packt Publishing, visit http://www.packtpub.com/. Please let me know if this interests you, so that I can give you more details on technical reviewing and the book. You can contact me at akashj@...2728... -- Thanks and Regards, Akash Johari Technical Editor [ Packt Publishing ] MSN: _akashj@...2729...

1 0

Relative font sizes
by Erik Hahn 16 May '10

16 May '10

Hi, Is there a way to make Inkscape use relative font sizes (em or %, or even mm) instead of px? Erik

2 1

Bug Hunt Complete! - 381/300
by Joshua A. Andler 14 May '10

14 May '10

This list contains fixes between 5/3 @ 1:39pm PDT - 5/13 @ 3:39am PDT. Only fixes to "true bugs" (i.e. no website/translation/docs/etc. bugs). Pts BugID Fixer Description ------------------------------------------------------------------------ 6 573512 JazzyNico Export XAML with matrix 12 220711 JazzyNico Inkscape export to XAML produces invalid XAML 9 519408 JohanEngelen Crash while saving opened PDF 6 446723 UNKNOWN Preferences: numeric precision tooltip error. 9 578990 UNKN (J.E.)? a line with self defined marker crashes... 6 488747 Chris Morgan Windows installer problems 0.47 6 489022 Chris Morgan Windows Uninstaller Doesn't Work 3 485027 JazzyNico Export to Gimp XCF returns deprecation... 9 463602 Kosiński crash when node-editing pattern-filled object 6 572906 JazzyNico Export invisible layer in XAML 6 516462 JazzyNico XAML error when I set Object Properties 18 282421 JazzyNico Save As XAML Inkscape crashes after five... ------------------------------------------------------------------------

2 1

inkscape for rapid "paper-based" prototying
by unknown＠example.com 10 May '10

10 May '10

Hi list I use inkscape for "paper-based" prototyping. I use layers for each screen and print them to test the prototype with users. Now I thougth instead of printing I could use inkscape directly. I noticed theres a property dialog for each object. So the question is if it is possible to use the "onclick" action to bring a defined layer to the front. Example: the layer "Main-Menu" is the top layer. On this layer is a button- object "Configuration". If I click on this button, the Configuration layer becomes the top layer. This way I can do exactly the same as I would do printing all layers. Is something like this possible? If someone know how to realize this, I would be very happy to get hint's code-example or whatever it takes. thanks for any hints ~nos

1 0

Download for inkscape for use with Vista 64 bit
by Bibi Morris 30 Apr '10

30 Apr '10

Does anyone know where a version of inkscape can be downloaded for use on a Windows Vista 64 bit operating system? Thanks in advance Bibi

2 1

Grouping text and shadow loses blur
by Judy Wilson 27 Apr '10

27 Apr '10

I am trying to take a piece of text, make a white copy to make a shadow which I have slightly blurred with the Object Fill and Stroke tool, but when I select one, hold down the shift key to have both selected, then Group them, the white shadow loses it blur. What am I missing? Thanks! Judy Wilson in Belize

2 2

Input Devices Settings in current bzr version not stored permanently
by Alexander Roalter 25 Apr '10

25 Apr '10

The input devices settings (for extended input, e.g. tablet) have changed some time ago to a different format. Now, I can set the stylus device to Screen to have it pressure sensitive as expected, and it is also stored as this in the preferences.xml, but on reload if forgets this setting. My stylus device is called Stylus0, the eraser Eraser0. Setting the eraser to screen mode, in the preferences.xml I see something like <group keys=";;;;;... axes="x;y;pressure;xtilt;ytilt;wheel" mode="screen" id="E:Eraser0" /> but no such entry for stylus or Stylus0 exists and is created... -- Cheers, Alex

1 0

Printing problem with imported PDF and added bitmap
by Philip Rhoades 25 Apr '10

25 Apr '10

People, I am using: inkscape-0.47-2.fc12.x86_64 I: - opened a PDF form - added some text but also my signature - saved the changed form as SVG and exported as a new PDF - sent the PDF to the responsible person (a Windows user) but although she can see the signature on the screen, it doesn't print (I presume she is using an Adobe viewer). I think she was able to get around it by doing a print screen and saving to a doc file? This could be a problem if it happens all the time . . Ideas? Thanks, Phil. -- Philip Rhoades GPO Box 3411 Sydney NSW 2001 Australia E-mail: phil@...2067...

2 3

arrow, always black
by Mihamina Rakotomandimby 24 Apr '10

24 Apr '10

Manao ahoana, Hello, Bonjour, I needed to draw a diagram of servers and therefore needed many arrows. I found how to have arrows with: - draw a line - right click on it - Fill & Stroke - Stoke Style - Star/Mid/End Markers But the "Marker" is always black. I want it the color of the line I draw. How to? Inkscape O.47. Misaotra, Thanks, Merci. -- Architecte Informatique chez Blueline/Gulfsat: Administration Systeme, Recherche & Developpement +261 34 29 155 34 / +261 33 11 207 36

3 2