- Inkscape Users - Inkscape Mailman

svg for web pages.
by john Culleton 01 Jun '13

01 Jun '13

I am planning to convert one of my web sites to all-svg. I am wondering about the use of a site map. Is it the same as for an html site (with different names of course)? -- John Culleton Wexford Press Free list of books for self-publishers: http://wexfordpress.net/shortlist.html PDF e-book: "Create Book Covers with Scribus" available at http://www.booklocker.com/books/4055.html

7 10

Inkscape as a (assistent) font editor
by Maarten van der Velde 31 May '13

31 May '13

I've put together something that might be interesting for Inkscape-users (as I am myself) As a side effect of an effort to create multi-colored webfonts, I've written a Ruby script that converts an Inkscape file to a SVG font. The workflow would be as follows: -Open a pre-build 'template' SVG file -This file contains: - an Inkscape layer for each character - guides for the basic font metrics - per layer an extra rectangle to indicate the character-width -Draw a character in each layer. (and make sure they're 'paths') -adjust the guides to match your font metrics (ascenders, descenders, x-height, cap-height) -save the file as a SVG file -run the script --> SVG font!!! The font can now be edited further in, for example, FontForge and exported to TTF etc. Everything is still very much 'in progress' but it might already be of interest for some of you. I've put a more elaborate explanation on my website, together with a link to the scripts in GitHub: http://www.ideogram.nl/content/multicolorfont Ofcourse, feedback is very welcome! (I know Inscape has a build in font-editor, but I find it quite clumsy to use. This script doesn't use it at all.) I hope you don't mind I advertise my work in this way, but apart from some feedback and help, there's no earnings in it for me and if it turns out to be helpful for you, the community only gains from it.

1 0

Re: [Inkscape-user] Shrinking the results of JPG to SVG conversion
by Pranav Lal 30 May '13

30 May '13

Hi all, Just a quick note to say that I need to batch convert the files so I can't open inkscape and do things like trace the bitmap as shown on sites like http://thefrugalcrafter.wordpress.com/2008/10/27/convert-a-png-to-a-svg-file works-for-jpg-too/ -----Original Message----- From: Pranav Lal [mailto:pranav.lal@...155...] Sent: Tuesday, April 17, 2012 6:23 AM To: 'mailing list!' Subject: Shrinking the results of JPG to SVG conversion Hi all, I have a number of *.jpg files that I need to convert to svg. I am using inkscape for the conversion. The problem is that the resulting svg is almost 5 times the size of the jpeg file. I have tried saving the file in compressed plain svg but with no success. The file is still very large. Is there anything I can do to shrink the file? I have run an open source cleanup tool called cleanSVG downloadable from codeplex but that has not helped. I am open to using other JPG to SVG converters if inkscape is not the right tool for this exercise. Natively creating SVG is not an option at this point. Pranav

4 3

Wanted: Corel-DRAW-like envelope that does not deform the upper and lower borders
by Shlomi Fish 29 May '13

29 May '13

Hi all, I am trying to reproduce this effect - http://www.shlomifish.org/art/bk2hp/ - that I originally did in Corel-DRAW using Inkscape. Now, for that I used an envelope effect that construed the text like so: ----------------------- \ | \ | | | / | / | ----------------------- And later on applied perspective. However, when I attempt to do it using Inkscape, I get some deformation/mutation at the top and bottom like so - http://imgur.com/SdUWXA6 and don't want that. I've been considering to implement my own transformation on the points of the path using this equation - https://github.com/shlomif/Shlomi-Fish-Back-to-my-Homepage-Logo/blob/master… , but I hope to avoid it. Can anyone give me any leads? Regards, Shlomi Fish -- ----------------------------------------------------------------- Shlomi Fish http://www.shlomifish.org/ Stop Using MSIE - http://www.shlomifish.org/no-ie/ Become an awesome Perl ninja rockstar vampire zombie pirate. — http://is.gd/T2uCO7 Please reply to list if it's a mailing list post - http://shlom.in/reply .

2 3

Wanted: Corel-DRAW-like envelope that does not deform the upper and lower borders
by Shlomi Fish 28 May '13

28 May '13

Hi all, I am trying to reproduce this effect - http://www.shlomifish.org/art/bk2hp/- that I originally did in Corel-DRAW using Inkscape. Now, for that I used an envelope effect that construed the text like so: ----------------------- \ | \ | | | / | / | ----------------------- And later on applied perspective. However, when I attempt to do it using Inkscape, I get some deformation/mutation at the top and bottom like so - http://imgur.com/SdUWXA6 and don't want that. I've been considering to implement my own transformation on the points of the path using this equation - https://github.com/shlomif/Shlomi-Fish-Back-to-my-Homepage-Logo/blob/master…, but I hope to avoid it. Can anyone give me any leads? Regards, Shlomi Fish -- ------------------------------------------ Shlomi Fish http://www.shlomifish.org/ Electrical Engineering studies. In the Technion. Been there. Done that. Forgot a lot. Remember too much. Please reply to list if it's a mailing list post - http://shlom.in/reply .

2 2

Wanted: Corel-DRAW-like envelope that does not deform the upper and lower borders
by Shlomi Fish 28 May '13

28 May '13

Hi all, I am trying to reproduce this effect - http://www.shlomifish.org/art/bk2hp/ - that I originally did in Corel-DRAW using Inkscape. Now, for that I used an envelope effect that construed the text like so: ----------------------- \ | \ | | | / | / | ----------------------- And later on applied perspective. However, when I attempt to do it using Inkscape, I get some deformation/mutation at the top and bottom like so - http://imgur.com/SdUWXA6 and don't want that. I've been considering to implement my own transformation on the points of the path using this equation - https://github.com/shlomif/Shlomi-Fish-Back-to-my-Homepage-Logo/blob/master… , but I hope to avoid it. Can anyone give me any leads? Regards, Shlomi Fish -- ----------------------------------------------------------------- Shlomi Fish http://www.shlomifish.org/ Stop Using MSIE - http://www.shlomifish.org/no-ie/ Become an awesome Perl ninja rockstar vampire zombie pirate. — http://is.gd/T2uCO7 Please reply to list if it's a mailing list post - http://shlom.in/reply .

1 0

Inkscape on OSX 10.8
by Christian Grobmeier 24 May '13

24 May '13

Hello all, before a couple of days I needed to upgrade from osx 10.6 to 10.8. Today I realized Inkscape doesn't open any more. On the download page is only a snow leo version available. So does that mean you are not supporting osx any more? This would be a horrible loss for me. Maybe there are other options to get inkscape running on my mac again. If so, I would be very glad about any tipps how to do it. Thanks Christian

5 8

Shrink item changes DPI?
by john Culleton 23 May '13

23 May '13

In Gimp there is a facility for reducing an image's size and increasing the dpi in proportion. In Inkscape is there a way to shrink an image and as a result increase the dpi? -- John Culleton Wexford Press Free list of books for self-publishers: http://wexfordpress.net/shortlist.html PDF e-book: "Create Book Covers with Scribus" available at http://www.booklocker.com/books/4055.html

4 4

Is there a good way to do map regions?
by Paul Whipp 21 May '13

21 May '13

I'm making SVG game maps where a region on the map is a closed path. These regions usually share boundaries with one another so they often form a 'mesh' (consider a grid of squares or hexagons as examples, although for the maps the regions are rarely regular). To create them I have to copy and paste bits of path so that regions have nicely overlapping boundaries which works but is very tedious, particularly as I'd like to start building maps with large numbers of regions (>500). I'm thinking I'd like to be able to start with a closed path (e.g. a continental outline) and treat it as a 'region mesh' - this would be like a normal closed path except that I could add a 'branch' node to it that would connect to another 'branch' node, creating two regions - these would be maintained as separate closed paths for export and the shared boundaries would always exactly overlap. However, it seems likely someone has faced this problem before - there are lots of SVG maps out there that have regions defined in this manner. Can anyone point me towards a good solution for rapidly building a layer of map regions?

3 2

Granularity along inch rulers.
by john Culleton 21 May '13

21 May '13

I am working on a book about covers using the Perfect Cover Generator. This works in inches. I need to tell how to draw some additional guides at distances of 0.25 inch from the generated guides marking the spine. However the rulers along the sides only measure in inches with 1/4 inch tick marks. I need at a minimum 1/8 inch marks to approximate the correct positioning. How can I refine the rulers to show these 1/8 inch subdivisions? I can draw my own ruler along a path or convert temporarily to pixels and count off 18 pixels but either of these techniques seem a bit clumsy. -- John Culleton Wexford Press Free list of books for self-publishers: http://wexfordpress.net/shortlist.html PDF e-book: "Create Book Covers with Scribus" available at http://www.booklocker.com/books/4055.html

2 2

Re: [Inkscape-user] Illustrator complains about too many nested groups
by Maarten van der Velde 20 May '13

20 May '13

Just wondering: are you using layers in the Inkscape file? Because Inkscape layers are not real layers, but also just groups (at least: in the SVG-file). Maybe Illustrator gets confused about that. If any program ought *not* complain about too many nested groups, it's Illustrator...Groups in clipping paths in layers in composite paths in groups in groups in groups in groups in layers... Other brainfart: might there be 'clones' in your Inkscape document that Illustrator doesn't like? On Sun, May 19, 2013 at 9:24 AM, Maarten van der Velde < m.h.vandervelde@...155...> wrote: > Just wondering: are you using layers in the Inkscape file? Because > Inkscape layers are not real layers, but also just groups. Maybe > Illustrator gets confused that. > > If any program should *not* complain about too many nested groups, it's > Illustrator...Groups in clipping paths in layers in composite paths in > groups in groups in groups in groups in layers... > > Other brainfart: might there be 'clones' in your Inkscape document that > Illustrator doesn't like? > > > On Sun, May 19, 2013 at 2:13 AM, Antony Lee <antony.lee@...329...>wrote: > >> I only had 5 levels, which doesn't sound crazy... >> Thanks for the suggestions. >> Antony >> >> >> 2013/5/18 Hendrik Boom <hendrik@...2611...> >> >>> On Wed, May 15, 2013 at 07:25:56PM -0700, Antony Lee wrote: >>> > Hi, >>> > One of my colleagues would like to use Illustrator (Adobe CS6, i >>> think) to >>> > edit some SVG files I created with Inkscape, but Illustrator complains >>> > about there being "too many nested groups". Any hints on how I could >>> "fix" >>> > the SVG? (Perhaps I could convince him to switch in Inkscape too, but >>> > well...) >>> > Thanks in advance, >>> > Antony >>> >>> Sounds like time to file a bug report, whatever else you do. >>> >>> -- hendrik >>> >>> >>> ------------------------------------------------------------------------------ >>> AlienVault Unified Security Management (USM) platform delivers complete >>> security visibility with the essential security capabilities. Easily and >>> efficiently configure, manage, and operate all of your security controls >>> from a single console and one unified framework. Download a free trial. >>> http://p.sf.net/sfu/alienvault_d2d >>> _______________________________________________ >>> Inkscape-user mailing list >>> Inkscape-user(a)lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/inkscape-user >>> >> >> >> >> ------------------------------------------------------------------------------ >> AlienVault Unified Security Management (USM) platform delivers complete >> security visibility with the essential security capabilities. Easily and >> efficiently configure, manage, and operate all of your security controls >> from a single console and one unified framework. Download a free trial. >> http://p.sf.net/sfu/alienvault_d2d >> _______________________________________________ >> Inkscape-user mailing list >> Inkscape-user(a)lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/inkscape-user >> >> >

1 0

DNA-swirl
by Jurgen Gaeremyn 20 May '13

20 May '13

Hey all, seeing some great feedback on this list, I'd like to ask you some help on my DNA-swirl... I'm trying to generate a DNA-swirl that I can then put along a path... Anyone knows how I can solve this problem? I would like to create a DNA-string that follows a path (not a straight line) Thanks, Jurgen.

3 3

Illustrator complains about too many nested groups
by Antony Lee 19 May '13

19 May '13

Hi, One of my colleagues would like to use Illustrator (Adobe CS6, i think) to edit some SVG files I created with Inkscape, but Illustrator complains about there being "too many nested groups". Any hints on how I could "fix" the SVG? (Perhaps I could convince him to switch in Inkscape too, but well...) Thanks in advance, Antony

7 8

LIve Preview in Perfect-bound cover extension.
by john Culleton 16 May '13

16 May '13

When using the Perfect Bound Cover Template the last choice is a checkbox labeled "Live Preview". What does this choice do? I don't see any difference. -- John Culleton Wexford Press Free list of books for self-publishers: http://wexfordpress.net/shortlist.html PDF e-book: "Create Book Covers with Scribus" available at http://www.booklocker.com/books/4055.html

2 1

Improving the diff-ability of inkscape
by Yannik Völker 12 May '13

12 May '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 First of all: I am not exactly shure if this belongs into -user if it should be put into the dev mailing list please tell me to do so Today I ran some experiments on collaborative work Inkscape. I put a file in a simple Hg-repository, created two branches, made some changes to each of them and afterwards tried to merge them back together. while doing so I ran into 3 Problems: The first one can't be changed by Inkscape: when you add objects to the same layer in both branches you need to tell the diff tool to insert them after each others so no big deal The second one is that Inkscape saves the zoom and view position; while its a bit annoying and i don’t relay see the advantage of saving those its easy to resolve. The third one is the reason for this mail: the svg format was designed not to waste too much bandwidth for path definitions (http://www.w3.org/TR/SVG/paths.html#PathDataGeneralInformation) so it was allowed to put skip some whitespaces, have relative and absolute formats and so on. While its not necessary to use it Inkscape actually uses some of those optimizations for size. That is where it gets problematic: No line based diff algorithm will ever be able to understand d="M 94.560583,882.94114 202.33942,447.30755 149.72092,186.54185 C 322.59461,172.3981 497.26518,91.769646 666.84911,199.34693 l 44.50099,59.86379 6.19919,124.61 -138.89214,182.52301 - -292.02038,376.68278 z" it would be way better if Inkscape would save all the commands in their own line with the correct command in front so you can put other lines in between without breaking everything: d="M94.560583,882.94114 M202.33942,447.30755 M149.72092,186.54185 C322.59461,172.3981 C497.26518,91.769646 C666.84911,199.34693 l44.50099,59.86379 l6.19919,124.61 l-138.89214,182.52301 l-292.02038,376.68278 z" would allow adding a point to the line by just adding a line without creating a huge diff. Additionally it would be good to never use relative coordinates (l) as changing one point would change two lines otherwise Please note that this suggestion is for the so-called Inkscape-SVG only (as that is the one people will use to work ), it should obviously be optimized as much as possible in the plain svg format. - -- Yannik Völker -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAEBAgAGBQJRilZAAAoJEDqk81AiCyXKzNwQAJP2BwXDVJ0ASIc+0Pw6TjsW yF3s6nGm4/5cWHbXXDUosCJNu4VH9bccFyEfwfoUHgPXoPWM7XQJWF+Imj+W5rTJ XfrCEyrLC/8fcqZpS301vfjv0492J4UZi+mMuIVVQQwa3djCISDg3GQHkOgiEPxw Gu7KJSDGvmct6sW+vKsErHLBgjh+NeE8d8ySEIXXryEi5boBO3+4Ai9IVEfkOCs7 qvDIXgmkePaLvFukLnAvOVJxSeXnTFRyQyozX5IQE+M7tTL6HQKf7qhDTXuJOkuJ tSdoCIcTE4Ksy0h+7wRgvZ/+rMcle+cZg9gt8YzAypsdSewLYDLljM0geIAfkxvp K8eVZs6f7Fmsqzb/hlVZrQLzb/oA+WR7iLcWuKGa3dtIYR1udvTA+UYzUNvjXn4t p50eqZ4a4yreg34GsM9dOuvEcy2RrVzvRxX0+Y5whzvx1ndj+XJwmrudOykfyip6 Xg6o9wtqYN4FCnEPTwcixUSl3uyCUN0QnjJtZLwlL6wSvOTJyCedsGv5Sh3lrIMr UUnK6kQoGKlmvWBdXB3eBqTJSUUC+NZdPZMCXD0TEm04SdaYS1901JpTyJMT0TXU NFz42yVz/pbU5y/j/zMDLhrmdPeAmDMqazyqwEXRTBOaxFvec/upyixuwNRPqsDO bpx80Tt5vkz4YA5+MT/W =o356 -----END PGP SIGNATURE-----

6 5

Re: [Inkscape-user] Noob question about shapes
by Arlo Barnes 09 May '13

09 May '13

OK, should work now. And now working off mailing list rather than forum. On Tue, May 7, 2013 at 3:42 PM, <inkscape-user-owner(a)lists.sourceforge.net>wrote: > Thank you for posting to the Inkscape User's list. However, due to > problems with spam, the list members have closed the list to posting > from people not subscribed to the list. Please join the list, and > re-send your email. Sorry for the trouble! > ---------- Forwarded message ---------- > From: "Arlo B." <arlo.barnes@...155...> > To: inkscape-user(a)lists.sourceforge.net > Cc: > Date: Tue, 07 May 2013 23:01:55 +0200 > Subject: Re: Noob question about shapes > I did not trust myself not to flub the path, so I googled for > 'parametric egg' (because I had previously messed around with > Extensions>Render>Parametric curves) and got > http://bsidneysmith.com/images/writings/2006-2010/egg%20equation.jpg > which I entered - and got half an egg. Oh well. I copied it and joined > the two paths (Which reminds me: If I want to make alterations to a path > symmetrically, is there an easy way to do it or do I have to figure out > what the reflected coordinates would be? No, never mind, I will ask that > in a new thread as the red text tells me to). Just thought this might > help / interest somebody. > -- > Posted via http://www.ruby-forum.com/. > -Arlo James Barnes

1 0

Problem with drawing - bkacp square on export
by Johan Vromans 08 May '13

08 May '13

Hi, I'm using Inkscape 0.48.4 on Fedora 17. I have a drawing that I save in SVG format that I want to embed in an OpenOffice (LibreOffice) text document. When imported in OpenOffice, I get a black rectangle covering part of the drawing. It does not matter whether I save in Inkscape SVG or plain SVG. When I use display (from ImageMagick) to show the SVGs, I also get the black rectangle. In FireFox, both SVGs show fine. When I save in OpenOffice Draw (ODG) format I loose all texts in the image. Help is appreciated. You can find the drawing and sample dislay in http://www.squirrel.nl/pub/xfer/uploads/3C1j41IOGG39BYF99PyBAiaw.zip Thanks. -- Johan

3 4

Stroke Dialog
by Martin Owens 08 May '13

08 May '13

Hey Users, I was doing a bit of design for the symbols dialog when I got distracted and had a few ideas about the stroke dialog. In any case, the ideas kept nagging until I wrote them down and I've put them here in the wiki for discussion: http://wiki.inkscape.org/wiki/index.php/Stroke_Dialog I will NOT be working on this yet as I'm currently working on symbols. But I would still like to hear your ideas about how to make our dialogs smarter, smaller and smoother (the three sm'ers of design ;) Best Regards, Martin Owens

2 1

discrete color scale object becomes continuous in eps export
by unknown＠example.com 30 Apr '13

30 Apr '13

dear all, I have a inkscape problem that I do not understand. An object showing a discrete color scale is converted to a continuous scale in the eps export. here is the example file http://www.climate.unibe.ch/~muthers/exchange/drawing.svg this is the exported file http://www.climate.unibe.ch/~muthers/exchange/drawing.eps any help is appreciated! inkscape version is 0.48.4 on arch linux. cheers, stefan

2 4

DBus api signals
by cabieces julien 29 Apr '13

29 Apr '13

Hi, I have to produce a "plugin" for Inkscape. Python exception functionnalities are not enough for what I want to do so I came to try the DBus Api. With this one, I can communicate from my plugin to Inkscape but not in the other way. The only implemented signal is "ObjectMoved" but I need to know when Inkscape modifies a node, adds an attribute or things like that. I look after the dbus extension code and it seems that the signals that I want are described in proposed-interface.xml and are not yet implemented. Is there any way to achieve what I want to do? Is there further development forecast for dbus extension? Is this possible to propose eventually patch? Thanks for the reply Julien

2 2

Text to path in a circle
by Javier Garcia 26 Apr '13

26 Apr '13

Hi, I'm using text to path to put text around circle, in the outter part. It works ok, but how can i put the text in the inner part of the circle? 0.48 Javi

2 2

Base layer color.
by john Culleton 25 Apr '13

25 Apr '13

Quick question: Is the base layer of a new Inkscape document by default white or by default transparent? -- John Culleton Wexford Press Free list of books for self-publishers: http://wexfordpress.net/shortlist.html PDF e-book: "Create Book Covers with Scribus" available at http://www.booklocker.com/books/4055.html

2 2

Trying to create a rubber stamp effect
by Javier Garcia 23 Apr '13

23 Apr '13

Hi, I have found this tuto about creating a rubber stamp effect: http://howto.nicubunu.ro/rubber_stamp_inkscape/ It says I should do an intersection between the image and the calligraphic drawing, but for me it doesn't work.., I mean, Inkscape doesn't do any intersection..Of course I select both objects before trying the intersection. I attach a file. 0.48 Javi

4 7

Importing graphs from Excel
by Jurgen Gaeremyn 19 Apr '13

19 Apr '13

Hello list, for an article I need to edit a graph made in Excel (2007). This is my current workflow: 1. In Excel: Print to PDF (using Cute PDF) 2. Open the PDF file in Inkscape The big caveat is: text items don't behave well at all. They are really naughty :p -> when changing fonts or size, the spacing doesn't adapt (so text gets squashed when a bigger font is chosen) -> certain text elements that don't belong together, all of the sudden become one item (f.e. the scale items and the R² text, but the ² is a different text block) Currently, the only solution I see, is retyping all the text manually. Obviously, this is quite a waste of time. I hope some of you know a better solution for this... Thanks, Jurgen.

3 2

Re: [Inkscape-user] Web design using Inkscape.
by unknown＠example.com 18 Apr '13

18 Apr '13

4 3

Dissolve surrounded colors of a cropped image with the background
by Javier Garcia 17 Apr '13

17 Apr '13

Hi, I have two layers: a background in yellow and a cropped image in the other layer. Now I want to dissolve the cropped image in the background, how can i do that automatically? I know I have the smudge tool, but the results are not so good for me... http://postimg.org/image/c433e336d/ 2.8.2

1 0

Re: [Inkscape-user] Web design using Inkscape.
by unknown＠example.com 15 Apr '13

15 Apr '13

5 5

An HTML attachment was scrubbed? Why? Please, explain. Thank you!
by unknown＠example.com 12 Apr '13

12 Apr '13

1 0

About formatting text
by Javier Garcia 12 Apr '13

12 Apr '13

Hi, I have selected a piece of text (Canalones Bastimar) to choose another font but the lines become like this: Is the same for you? The types are Futura Light and Futura Normal. Any idea? 0.48 Javi

3 3

Using Braille labels in inkscape
by Pranav Lal 11 Apr '13

11 Apr '13

Hi all, Is it possible to use Braille labels in inkscape? Is there a way to import Braille fonts? I have vector diagrams that I need to Braille label. See an example at https://dl.dropbox.com/u/3688386/drawing%207.svg Pranav

5 6

Web design using Inkscape.
by john Culleton 11 Apr '13

11 Apr '13

I bought the book "Inkscape 0.48 Essentials for Web Designers." Unfortunately the boook is light on worked examples. Does anyone here care to post the url of a site using Inkscape, either for main pages or for embedded svg images in an html page? Incidentally Chapter 23 of Tavmong Bah's manual has more useful infomration on this subject then the entire book that I bought, referenced in the first sentence. Live and learn. FYI my first baby steps toward such a site are at http://webdesign.wexfordpress.net -- John Culleton Wexford Press Free list of books for self-publishers: http://wexfordpress.net/shortlist.html PDF e-book: "Create Book Covers with Scribus" available at http://www.booklocker.com/books/4055.html

2 1

Redistribute text after changing the width of the text area
by Javier Garcia 09 Apr '13

09 Apr '13

Hi, when I change the width of a text area, the letters become widther also... Is there any way to just redistribute the text instead? 0.48 Javi

2 1

Is there any way to see in real time the rendered text?
by Javier Garcia 09 Apr '13

09 Apr '13

Hi, I mean, I have a selected text, I would like to see the effect of the different fonts of the list that there is in the upper left corner going down in the list one by one with the cursor, instead of clicking on them to see the result. Do you understand me?? :) Javi 0.48

3 6

Backward compatibility.
by john Culleton 04 Apr '13

04 Apr '13

Will the latest version of Inkscape read and process all files created by earlier versions? If not what are the limitations on backwards compatibilty? -- John Culleton Wexford Press Free list of books for self-publishers: http://wexfordpress.net/shortlist.html PDF e-book: "Create Book Covers with Scribus" available at http://www.booklocker.com/books/4055.html

2 1

I can not choose a fill color
by Javier Garcia 30 Mar '13

30 Mar '13

Hi, when I draw a box, it is transparent (the border is colored ok). This is what i see in "Fill and stroke": I tried to choose "Remove fill", but when i set a color again, the squares pattern on the left keeps in "Fill:" (look at the image) in "Fill and stroke". 0.48 and Ubuntu 12.10. Javi

2 1

Blur and Transparency Problem | Visualization and Exporting
by Jonathas Jackson 30 Mar '13

30 Mar '13

Hi Folks. I'm having some troubles using inkscape, First thing. transparency looks bad like the screenshot Screenshot 1<http://storage4.static.itmages.ru/i/13/0330/h_1364658718_5365723_412a2a0532…> the error persist on export bitmaps images(PNG) you can see exported bitmap in here Exported PNG<http://storage1.static.itmages.ru/i/13/0330/h_1364658896_3725906_2706a50d2e…> the workaround to this is uses on object in background like that screeshot shows ScreenShot2<http://storage5.static.itmages.ru/i/13/0330/h_1364659865_1700339_e8426aed79…> but the workaround don't serves if you need a completly transparent background image. to reproduce: *one layer in top use MULTIPLY blending mode *the layer above with blurred object System info: Inkscape+Devel r12258 KDE 4.10 Opensuse 12.3 x64 Kernel 3.7.10 Catalyst 13.1 Cairo : 1.12.15 <http://jotapontoroberto.wordpress.com/> . Deviantart Profile: http://pretojackson.deviantart.com/

1 0

How to generate this weave?
by Javier Garcia 30 Mar '13

30 Mar '13

Hi, any way to generate a weave like the one contained in the orange nav bar? That with red dots. http://www.google.es/imgres?imgurl=http://www.psdgraphics.com/file/psd-navi… Javi

2 2

Diagonal gradients for borders
by Javier Garcia 30 Mar '13

30 Mar '13

Hi, is possible to create diagonal gradient in borders? I can create horizontal and vertical gradients on borders, but not diagonal. Is a feature to request? Javi

2 2

3D .STL capabillity
by || ΣΖΟ || 26 Mar '13

26 Mar '13

I think it would be nice it there was a way to make simple .STL (3D) files. Now I know that inkscape isn't aimed at true 3D but the ease of use of inkscape is hard to find in any 3D modeling software. Now i'm not proposing to transform Inkscape into a full blown 3D modeling app. But it would be nice if it was possible to make something like this: http://worldofgnome.org/how-to-use-inkscape-to-print-3d/ completely in inkscape without the need of external software.. And have an option to cut out a few holes lets say to make a mounting plate. This is something google came up with. http://www.openbeamusa.com/images/products/226.jpg So it is 2.5D not fully 3D. All that's needed is an extrude thickness, and something that renders it to STL. I'm not into coding, but I think this could be done? There are a few other way's to do this but it would be wonderful if it could be done without external apps. Even better would be the full blown 3D transformation. But i'm not sure if I dare to ask for that.

1 0

Fwd: Looking for Native Inkscape for Mac 10.7.5
by Jake Johnson 25 Mar '13

25 Mar '13

Hi All, I really love inkscape, but I am ready to ditch my mac just so I can run native inkscape in linux. Before I do, does anyone have a native version that doesn't use X11 on mac? Best JJ

6 11

Inkscape Blu-Ray DVD success
by Phil Shapiro 17 Mar '13

17 Mar '13

Hi Inkscape fans, Last night I had fun making this short demo that showcases how beautifully Inkscape's vector graphics can show up on Blu-Ray videos. http://www.youtube.com/watch?v=-dWOBtGbVeo I tried quite hard to do this all on Linux, using OpenShot and k3b disc burning software. k3b will burn Blu-Ray video to Blu-Ray discs -- but not to regular DVD disks. I don't own a Blu-Ray burner yet. If anyone would like to chip in to help me buy an internal Blu-Ray burner for my Linux tower, i'm happy to give a try at making a Blu-Ray disc using only free software (Inkscape, OpenShot, k3b). The good news is that the price of blank Blu-Ray media has dropped quite a lot. I still prefer using DVD's. phil shapiro washington dc -- Phil Shapiro, pshapiro@...2324... http://www.his.com/pshapiro/briefbio.html http://www.twitter.com/philshapiro http://www.his.com/pshapiro/stories.menu.html "Wisdom begins with wonder." - Socrates "Learning happens thru gentleness."

1 0

Google Summer of Code - 2013 Edition
by Tavmjong Bah 12 Mar '13

12 Mar '13

Inkscape will be submitting a request to participate again in this year's Google Summer of Code (GSOC). GSOC is a program where students who are 18 or older (as of May 27th) spend their summer coding for an approved Open Source project and in return receive a stipend of $5000. Details can be found on the GSOC website: https://www.google-melange.com/gsoc/homepage/google/gsoc2013 We are looking for students passionate about Inkscape and Open Source software in general. Now is the time to develop your ideas and to begin to plan your project. Details about what is required to apply for GSOC to work on Inkscape can be found at: http://wiki.inkscape.org/wiki/index.php/Google_Summer_of_Code Pay special attention to the required tasks listed on the SOC Application Template page. Please don't hesitate to contact us if you are interested in working on Inkscape.

1 0

New realeas of BSpline+Spirolive
by Jabier Arraiza 08 Mar '13

08 Mar '13

Hi to all, here is the post: http://www.inkscapeforum.com/viewtopic.php?f=11&t=13496 Best regards.

1 0

Poster printing over multiple pages
by Keith Clark 07 Mar '13

07 Mar '13

I have to create a menu board that measures 70 cm x 50 cm and my printer can only print up to US Legal sized paper. Can Inkscape do this? Thanks, Keith

4 3

inkscape 48.4 install woes.
by john Culleton 18 Feb '13

18 Feb '13

In both Slackwaate 14 and Debian wheezy I am presented with a list of missing or outdated packages when compiling stable version Inkscape 0.48.4. Is there a precompiled version in e.g. tarball or RPM format that I can install? Or is there a single package of all the lib packages needed for 48.4? I grow tired of library chasing, especially on Debian where apt-get simply doesn't recognize the names of the missing libs. Here are the missing libs using Slackware 14.0: No package 'gdkmm-2.4' found No package 'glibmm-2.4' found No package 'giomm-2.4' found No package 'gtkmm-2.4' found No package 'sigc++-2.0' found No package 'gsl' found When I search out and download these I find that there are additional packages missing. -- John Culleton Wexford Press Free list of books for self-publishers: http://wexfordpress.net/shortlist.html PDF e-book: "Create Book Covers with Scribus" available at http://www.booklocker.com/books/4055.html

2 1

Sewing Pattern extension
by Susan Spencer 18 Feb '13

18 Feb '13

Hi everyone, Here is a link to an Edwardian-era Shirt Waist draft which has been coded into an Inkscape extension. Please take a look at it and let me know if this seems usable. Code comments are welcome, too! sewing_patterns.py<https://docs.google.com/file/d/0BxsnjDIHW4yveE5MZzhUUDQyUms/edit?usp=sharing> shirt_waist_allington.inx<https://docs.google.com/file/d/0BxsnjDIHW4yvY0Fzc2lkN0NSSTg/edit?usp=sharing> shirt_waist_allington.py<https://docs.google.com/file/d/0BxsnjDIHW4yvSHNMelVxZThraTA/edit?usp=sharing> Copy these file to the Inkscape user extensions directory, and mark sewing_patterns.py as executable. The Tau Meta Tau Physica blog <http://www.taumeta.org/?page_id=247> covers how the pattern from this book was converted into code. xo, - Susan

2 2

Blog post - Can Inkscape reduce the number of incarcerated people?
by Phil Shapiro 18 Feb '13

18 Feb '13

For those who might be interested, here's a new blog post I wrote this morning. http://opensource.com/life/13/1/inkscape-save-from-crime phil shapiro -- Phil Shapiro, pshapiro@...2324... http://www.his.com/pshapiro/briefbio.html http://www.twitter.com/philshapiro http://www.his.com/pshapiro/stories.menu.html "Wisdom begins with wonder." - Socrates "Learning happens thru gentleness."

2 1

DBus API
by Brian Lewis 15 Feb '13

15 Feb '13

I got code from bzr and built with --enable-dbus-api. In /usr/share/dbus-1/services, I added org.inkscape.service: [D-BUS Service] Name=org.inkscape Exec=/usr/bin/inkscape Code like import dbus bus = dbus.SessionBus() inkdoc1 = bus.get_object('org.inkscape', '/org/inkscape/desktop_0') causes inkscape to start via dbus, but the bus.get_object doesn't succeed. I get an error from DBus: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.inkscape': no such name What else do I need to do?

2 4

Using Inkscape on 2560 x 1400 pixel monitors
by Phil Shapiro 13 Feb '13

13 Feb '13

Hi Inkscape fans, I've been having fun exploring the use of Inkscape on a 27-inch LCD monitor -- with 2560 x 1440 pixels. Here are two explanatory screencasts I made. http://www.youtube.com/watch?v=Bo_sz28XoKs http://www.youtube.com/watch?v=gJgvhAk623A Here in the United States the price of 2560 x 1440 monitors is dropping substantially. Starting next month you can buy a 27-inch LCD monitor for $390 from monoprice.com http://tinyurl.com/btwp4bj I'm curious to hear if there are any Inkscape cartoonists here on this list. It might be fun to try creating a BluRay video (using OpenShot) with still graphics created in Inkscape. phil shapiro washington dc -- Phil Shapiro, pshapiro@...2324... http://www.his.com/pshapiro/briefbio.html http://www.twitter.com/philshapiro http://www.his.com/pshapiro/stories.menu.html "Wisdom begins with wonder." - Socrates "Learning happens thru gentleness."

2 1

Saving a Logo file in Inkscape
by Sarah Parker-Smith 04 Feb '13

04 Feb '13

Hi there, I have created a logo in Inkscape using vector layers. It is saved as an svg file and I need to create the following: Layered vectors in EPS & PDF Can someone please let me know how I would go about saving the file so that the layers I have created are maintained in the pdf and eps documents as requested? Thanks for your help! Sarah

1 0