Printing Conondrum
by Rick Spillane
I want to print my work out now that I've finished working on it.
However it seems as though every portable file format that I can take
to the poster-printing place is broken with respect to something
Inkscape uses in SVG, the export to bitmap seems to ignore
transparencies in certain spots for some reason, the pdf export leaves
out whole shapes, and cuts off other shapes, as well as distorting
them too, and I don't really think post script will do better than
pdf, but I haven't honestly tried that yet.
Is there some way to export my SVG drawing to a portable and printable
format that I can take to kinko's?
--
Rick
necro351@...155...
17 years, 4 months
0.44 crashes
by Lars Behrens
Hi there,
anybody facing the same problem? As I can't log in to scourceforge ("
Logins to SourceForge.net are currently disabled."), I thought that I'd
ask if someone has an idea what could be wrong:
When I try to start inkscape 0.44 it crashes with the following message
(Inkscape 0.43 works ok):
************************************************************************
> *** glibc detected *** free(): invalid pointer: 0x086143b0 ***
>
> Emergency save activated!
> Emergency save completed. Inkscape will close now.
> If you can reproduce this crash, please file a bug at www.inkscape.org
> with a detailed description of the steps leading to the crash, so we
can fix it.
>
************************************************************************
This happens no matter if I build from scratch, use an autopackage or a
binary from linux packages.
Here'a gdb backtrace:
************************************************************************
> warning: Cannot initialize thread debugging library: unknown thread_db
error '22
> '
> *** glibc detected *** free(): invalid pointer: 0x086143b0 ***
>
> Program received signal SIGABRT, Aborted.
> 0xb6f87847 in raise () from /lib/tls/libc.so.6
> (gdb) bt
> #0 0xb6f87847 in raise () from /lib/tls/libc.so.6
> #1 0xb6f890d9 in abort () from /lib/tls/libc.so.6
> #2 0xb6fbb616 in __libc_message () from /lib/tls/libc.so.6
> #3 0xb6fc1d4f in _int_free () from /lib/tls/libc.so.6
> #4 0xb6fc20ea in free () from /lib/tls/libc.so.6
> #5 0xb716c341 in operator delete () from /usr/lib/libstdc++.so.6
> #6 0xb714d297 in std::string::_Rep::_M_destroy ()
from /usr/lib/libstdc++.so.6
> #7 0x084a542f in Inkscape::Extension::Dependency::check ()
> #8 0x084a28f4 in Inkscape::Extension::Extension::check ()
> #9 0x084abd88 in Inkscape::Extension::Input::check ()
> #10 0x084a5498 in Inkscape::Extension::check_extensions_internal ()
> #11 0x084a3afc in Inkscape::Extension::DB::foreach ()
> #12 0x084a5776 in Inkscape::Extension::init ()
> #13 0x0817868c in inkscape_application_init ()
> #14 0x0816c599 in sp_main_gui ()
> #15 0x0826ff8a in Inkscape::NSApplication::Application::run ()
> #16 0x0816bf58 in main ()
************************************************************************
Version: 0.44
Platform: Slackware Linux 10.2
Kernel 2.6.11.11
glibc 2.3.6
gcc 3.4.4
Language: German
TIA!
Cheerz Lars
17 years, 4 months
Problem with gradients
by Leonardo
Hi all,
I'm learning to use Inkscape, and have found my first 'real'
problem.
I made something with inkscape that has a color gradient in it,
but when I save it as eps or pdf file, the gradient is not
present and I see only a full color.
I searched the net for posts and documentation, but I could
only find a note on inkscape 0.42 saying that it supports eps
gradients.
I have 0.43, so where's the problem?
Thanks, Leo
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
17 years, 4 months
save as pdf: acrobat - a number value is out of range
by Marco A. S. Netto
Hello guys,
I'm having a problem to save a figure as .pdf. I tried to reduce the
number of objects of my original figure to figure out where is the
error.
So if a simply create a new file and import the object
computer/server_olivier_boyer_01.svg from openclipart, after I save
this file, when I open my Acrobat 7.0.1 I receive the message "a
number value is out of range".
Has anybody had this problem? I don't know if there is something
special in the "server_oliver_boyer_01.svg" file.
Please, any help is very welcome. (I'm using inkscape 0.44.)
Thanks in advance,
Marco
17 years, 4 months
Re: [Inkscape-user] Transparency and printing or pdf export
by Loïc Martin
bulia byak a écrit :
> On 7/4/06, Loïc Martin <lomartin3@...155...> wrote:
>> Ok. I know acroread does "flatten" it - it's quite usefull when the
>> printer don't have a big memory.
>
> So, you may try to export transparent PDF from Inkscape and print it
> from Acrobat. Whether this will be any better than printing bitmap I
> cannot say.
>
Thanks to everybody I was able to print my files with transparency (and
still have a few hours of sleep ;) ). There's still the problem of text
without transparency but that'll have to do for now (and it could be an
acroread bug - evince don't even handle transparency in pdf so I can't
check)
I can't print in bitmap because my printer don't like it (not enough
memory), that's another reason to use Inkscape over the Gimp!
>> Doesn't postscript level 3 handle
>> transparency ?
>
> No.
>
The day they'll add it will be a good day - unless cairo comes to help
before (if it's possible to use cairo for printing, that is)
17 years, 4 months
NEW: dropper tool option changes
by bulia byak
Instead of the confusing toggle button, now the Controls bar for the
Dropper tool has two checkboxes, "Pick alpha" and "Set alpha", which
work as follows. Suppose you have an object selected and, using
Dropper, click on an object which has red (#FF0000) fill and 0.5
opacity (half-transparent).
- If the "Pick alpha" checkbox is off, the selected object
will get the fill color #800000 (i.e. faded-out red) and fill opacity
will be at 1.0 (opaque).
- If the "Pick alpha" checkbox is on but "Set alpha" is off,
the selected object will get the fill color #FF0000 (red) and fill
opacity will be at 1.0.
- If both "Pick alpha" and "Set alpha" are on, the selected
object will get the fill color #FF0000 (red) and fill opacity will be
at 0.5 (half-transparent).
If you Shift+click instead of click, the same changes will be made to
stroke color and stroke opacity, correspondingly. Note that in no
situation can Dropper change the master opacity of the selected
object(s), although it can pick it just as it does any other kind of
opacity.
--
bulia byak
Inkscape. Draw Freely.
http://www.inkscape.org
17 years, 4 months
problem compiling inkscape
by j michaelson
hello all,
i've been compiling inkscape from subversion for a while. i've just
updated subversion and tried to compile it but it's not working.
./configure worked ok, but make had some worrying bits at the end....
make[2]: *** [composite-undo-stack-observer.o] Error 1
make[2]: Leaving directory `/home/john/a/inkscape/subversion-inkscape/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/john/a/inkscape/subversion-inkscape'
make: *** [all] Error 2
i tried installing it anyway with make install and got this....
Making install in src
make[1]: Entering directory `/home/john/a/inkscape/subversion-inkscape/src'
if g++ -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/include/freetype2
-I/usr/include/freetype2 -DPOTRACE=\"potrace\" -pthread
-I/usr/include/gdkmm-2.4 -I/usr/lib/gdkmm-2.4/include
-I/usr/include/glibmm-2.4 -I/usr/lib/glibmm-2.4/include
-I/usr/include/pangomm-1.4 -I/usr/include/gtk-2.0
-I/usr/lib/gtk-2.0/include -I/usr/include/sigc++-2.0
-I/usr/lib/sigc++-2.0/include -I/usr/include/glib-2.0
-I/usr/lib/glib-2.0/include -I/usr/include/pango-1.0
-I/usr/include/cairo -I/usr/include/gtkmm-2.4
-I/usr/lib/gtkmm-2.4/include -I/usr/include/atkmm-1.6
-I/usr/include/atk-1.0 -I/usr/include/libxml2 -I../cxxtest -Wall
-W -Wpointer-arith -Wcast-align -Wsign-compare -Woverloaded-virtual
-Wswitch -Wno-unused-parameter -g -O2 -MT
composite-undo-stack-observer.o -MD -MP -MF
".deps/composite-undo-stack-observer.Tpo" \
-c -o composite-undo-stack-observer.o `test -f
'composite-undo-stack-observer.cpp' || echo
'./'`composite-undo-stack-observer.cpp; \
then mv -f ".deps/composite-undo-stack-observer.Tpo"
".deps/composite-undo-stack-observer.Po"; \
else rm -f ".deps/composite-undo-stack-observer.Tpo"; exit 1; \
fi
gc-alloc.h: In member function 'void Inkscape::GC::Alloc<T,
collect>::construct(T*, const T&) [with T =
Inkscape::CompositeUndoStackObserver::UndoStackObserverRecord,
Inkscape::GC::CollectionPolicy collect = MANUAL]':
/usr/lib/gcc/x86_64-linux-gnu/4.0.3/../../../../include/c++/4.0.3/bits/stl_list.h:441:
instantiated from 'std::_List_node<_Tp>* std::list<_Tp,
_Alloc>::_M_create_node(const _Tp&) [with _Tp =
Inkscape::CompositeUndoStackObserver::UndoStackObserverRecord, _Alloc
= Inkscape::GC::Alloc<Inkscape::CompositeUndoStackObserver::UndoStackObserverRecord,
MANUAL>]'
/usr/lib/gcc/x86_64-linux-gnu/4.0.3/../../../../include/c++/4.0.3/bits/stl_list.h:1152:
instantiated from 'void std::list<_Tp,
_Alloc>::_M_insert(std::_List_iterator<_Tp>, const _Tp&) [with _Tp =
Inkscape::CompositeUndoStackObserver::UndoStackObserverRecord, _Alloc
= Inkscape::GC::Alloc<Inkscape::CompositeUndoStackObserver::UndoStackObserverRecord,
MANUAL>]'
/usr/lib/gcc/x86_64-linux-gnu/4.0.3/../../../../include/c++/4.0.3/bits/stl_list.h:774:
instantiated from 'void std::list<_Tp, _Alloc>::push_back(const
_Tp&) [with _Tp =
Inkscape::CompositeUndoStackObserver::UndoStackObserverRecord, _Alloc
= Inkscape::GC::Alloc<Inkscape::CompositeUndoStackObserver::UndoStackObserverRecord,
MANUAL>]'
composite-undo-stack-observer.cpp:27: instantiated from here
gc-alloc.h:54: error: no matching function for call to
'Inkscape::CompositeUndoStackObserver::UndoStackObserverRecord::operator
new(long unsigned int, void*)'
gc-managed.h:34: note: candidates are: static void*
Inkscape::GC::Managed<default_scan, default_collect>::operator
new(size_t, Inkscape::GC::ScanPolicy, Inkscape::GC::CollectionPolicy)
[with Inkscape::GC::ScanPolicy default_scan = SCANNED,
Inkscape::GC::CollectionPolicy default_collect = AUTO]
make[1]: *** [composite-undo-stack-observer.o] Error 1
make[1]: Leaving directory `/home/john/a/inkscape/subversion-inkscape/src'
make: *** [install-recursive] Error 1
i've got no idea what's happening here. any suggestions?
i'm running ubuntu 6.06 amd 64.
john m.
17 years, 4 months
Re: [Inkscape-user] Transparency and printing or pdf export
by Loïc Martin
Bryce Harrington a écrit :
> On Tue, Jul 04, 2006 at 06:33:14PM +0200, Lo?c Martin wrote:
>
>> Bryce Harrington a ?crit :
>>
>>> On Tue, Jul 04, 2006 at 06:05:41PM +0200, Lo?c Martin wrote:
>>>
>>>
>>>> Hi,
>>>> I'm trying to print a file created with Incscape (Inkscape 0.43+devel,
>>>> built May 31 2006) but I can't get it to take in account the
>>>> transparency, either in direct printing, pdf export (or ps either).
>>>>
>>>> I know I can export in bitmap, but sadly my printer has only 2m of
>>>> memory and I can't print big bitmap files.
>>>>
>>>> Does anyone has a solution (possibly involving another program to print
>>>> the svg)?
>>>>
>>>>
>>> Maybe try Scribus?
>>>
>>> Bryce
>>>
>>>
>>>
>> Just tried with Scribus 1.2.4.1 under Ubuntu Dapper. Scribus messes up
>> all the text objects and don't even recognise transparency (even when I
>> save the file in Inkscape as a compatible svg).
>>
>> I'm downloading Inkscape 0.44 final (autopackage) but my line is really
>> slow this days. I've read on Inkscape release notes that Inkscape now
>> support pdf export with transparency - has this been solved between my
>> version and the final release (I just spent the whole day on this file
>> and I'm really keen to have it printed :) ) ?
>>
>
> Oh, I didn't notice you were running 0.43. Yeah it's likely that'll fix
> your problem. If nothing else, you'll be running the latest and
> greatest code. :-)
>
> Bryce
>
>
0.44 exports in pdf with transparency. Great thanks!
However, it seems text areas marked as transparent aren't exported as
transparent - acroread 7 doesn't show them with transparency. Is it the
expected behavior?
Inkscape doesn't print with transparency. Is it also a known bug, or is
it a system problem (ubuntu Dapper)? Has anyone been able to print with
transparency directly from Inkscape?
Thanks,
Loïc
17 years, 4 months
Transparency and printing or pdf export
by Loïc Martin
Hi,
I'm trying to print a file created with Incscape (Inkscape 0.43+devel,
built May 31 2006) but I can't get it to take in account the
transparency, either in direct printing, pdf export (or ps either).
I know I can export in bitmap, but sadly my printer has only 2m of
memory and I can't print big bitmap files.
Does anyone has a solution (possibly involving another program to print
the svg)?
17 years, 4 months