- Inkscape Users - Inkscape Mailman

Re: [Inkscape-user] Inkscape and animation
by Cory Pollard 01 Jun '06

01 Jun '06

I've used a bit of both apps. I really like synfig. Robert has given the open source community a massive gift. There is not as much develop on it as I would've first thought. If I knew anything about programming (and I intend to learn as soon as I get home to Aust) I would jump right in and help the guys....and inkscape to. I reakon if there were some full fledged forums for synfig, there would be MUCH more interest and possibly more develpment too. It's a real bitch to compile aswell.. As far as Ktoon is concerned, I found it similar to Toonboom, which I used for a bit back in my windows days. Not quite as advanced and documentation was very rare. Anyway that's my two bob.. -- Posted via http://www.ruby-forum.com/.

1 0

Inkscape on Ubuntu
by Noah Spurrier 01 Jun '06

01 Jun '06

I'm trying to install Inkscape 0.43 under Ubuntu using Aptitude. I get an error showing that certain dependencies are UNAVAILABLE: libgc1 (UNAVAILABLE) libglibmm-2.4-1 (>= 2.6.1) (UNAVAILABLE) libgtkmm-2.4-1 (UNAVAILABLE) libsigc++-2.0-0 (>= 2.0.2) (UNAVAILABLE) Any hints? Yours, Noah P.S. I have the following two lines at the beginning of my /etc/apt/source.list deb http://honk.physik.uni-konstanz.de/~wolfi/inkscape sarge/ deb-src http://honk.physik.uni-konstanz.de/~wolfi/inkscape sarge/ $ uname -a Linux alpha 2.6.12-10-386 #1 Fri Apr 28 13:13:44 UTC 2006 i686 GNU/Linux $ cat /proc/version Linux version 2.6.12-10-386 (buildd@...1923...) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8.1)) #1 Fri Apr 28 13:13:44 UTC 2006

3 2

buggy layers dialog
by Cory Pollard 01 Jun '06

01 Jun '06

I had 2 layers, both visable then I renamed them both to something different than layer 1. layer 2. Then I clicked the hide/unhide when i was on the opposite of each layer and then the naming convention returned to Layer 1 and Layer 2 I am using the may 27 autopackage build on ubuntu breezy badger. -- Posted via http://www.ruby-forum.com/.

2 3

cropping
by Ezequias Rodrigues da Rocha 01 Jun '06

01 Jun '06

Hi list, I need to crop this two elements but I can't do that. Could some good soul do dis for me ? I need to subtract the blank image from the globe image. My best regards ... -- Ezequias Rodrigues da Rocha http://ezequiasrocha.blogspot.com msn:ezequias@...9... "the worst of democracies is still better than the best of dictatorship"

5 9

Website portuguese translation
by Ezequias Rodrigues da Rocha 31 May '06

31 May '06

Hi list, I am here to ask wich person did the Portuguese translation of the website. There is kind of strange translation I didn't know if it is Portuguese from Portugal. I am brazilian and would like to contribute with this translation. Regards ... -- Ezequias Rodrigues da Rocha http://ezequiasrocha.blogspot.com msn:ezequias@...9... "the worst of democracies is still better than the best of dictatorship"

4 4

Gradient from black to blue
by Paulo J. Matos 31 May '06

31 May '06

Hi all, I'm having a problem with gradients. It seems I'm only able to create gradients from a color to white. I wish to create from black to blue. How can I do this? Is there any reference on gradients on the web? The tutorials don't seem to go through this and everything else about gradients seem to create <color> => white gradients. Any help is appreciated, Cheers, -- Paulo Jorge Matos - pocm at sat inesc-id pt Web: http://sat.inesc-id.pt/~pocm Computer and Software Engineering INESC-ID - SAT Group

3 2

Color Pallete Docking
by Ezequias Rodrigues da Rocha 31 May '06

31 May '06

Hi list, Could someone tell me how to dock the color pallete like you can see at: http://svn.sourceforge.net/viewcvs.cgi/inkscape/inkscape_web/trunk/screensh… Regards ... -- Ezequias Rodrigues da Rocha http://ezequiasrocha.blogspot.com msn:ezequias@...9... "the worst of democracies is still better than the best of dictatorship"

2 3

win32 0.44pre1 package available
by Adib Taraben 31 May '06

31 May '06

http://sourceforge.net/project/showfiles.php?group_id=93438&package_id=9911…

1 0

menuproblem 0.44pre...
by Hago Ziegler 28 May '06

28 May '06

Hi, I have -for some time now- a problem with 4 menus in Inkscape 0.44pre... First I thought it might be a state of the work. Now I want to make sure, that the problem is known You can see it here: http://hagoschaos.de/test/test.html It's explaining itself, I think. I'm running WinXP and I'm using the "Daily Inkscape Win32 Build Snapshots" Regards, Hago

4 6

resize svg
by nboire 28 May '06

28 May '06

Hello, I want to resize a svg with the command line. Is-it possible? i tried inkscape -l new.svg -w 500 -h 500 source.svg And i want do the same thing with the eps export ? Thanks you for your help. Best regards Nico

3 4

Printing revisited.
by Thetargos 28 May '06

28 May '06

Recently we had a discussion in the Fedora Marketing mailing list about color management and accuracy in Inkscape, and this discussion touched several topics like the lack of true CMYK support, not Inkscape's fault, but the format's; and other color accuracy topics including color profiling with ICC and other stuff. By looking at the SVG site over at the www.w3c.orgsite, I noticed there was a proposed spec for SVG for printing, which would be called SVGP, and if I understood correctly it would be a subset of SVG 1.2 spec with some additional features with printed media specifically in mind. My questions to the list, actually is if this is going to be supported by Inkscape, and if the developers know a time frame when we could expect to have the first implementation of the spec? In the mean time, what method do you recommend for producing printed material off Inkscape's designs? Being that currently there is no conversion table or color management with ICC (or not that I am aware of) and the issue of color accuracy, which is a major problem for a lot of people. Some one over the mailing list proposed EPS and PDF, but if further manipulation is required, how can these formats be easily manipulated? Unless you had the original SVG that originated these other files it would be impossible... Anyhow, how are people making printed materials with Inkscape doing it? Thanks in advance!

4 4

perl interface
by Axel Huizinga 28 May '06

28 May '06

Hi! Can anybody give me an example how to access objects in an open document via the perl interface? Is it possible to get the bounding boxes? Cordially, Axel

3 4

Re: [Inkscape-devel] Re: Inkscape 0.44 pre 0
by Adib Taraben 28 May '06

28 May '06

Spyros Blanas schrieb: > Is it possible to build and distribute a win32 binary as well? Many > people use Inkscape on Windows and we could benefit from their feedback > as well. > > Also, please upload your key to a public keyserver (like pgp.mit.edu)! > > Thanks, > - Spyros Blanas Done. win32 zip and exe installer provided. > > > Aaron Spike wrote: >> I've just uploaded the tarball for 0.44pre0. Enjoy. >> >> I'll upload an autopackage later this evening, if time permits. >> >> Aaron Spike > However I could not compile the tarball itself I need to checkout the tag from SVN. There are some cxx tests missing. I will dig into next week and report in detail. Adib. ---

1 0

0.44: Shift+middle button drag pans, does not zoom in
by Jean-François Lemaire 27 May '06

27 May '06

Hello, I see in the release notes for Inkscape 0.44 that Shift+middle button drag should zoom into the canvas, but here it does exactly the same as middle button drag: panning. And yes, both my Shift keys are working fine :-) JFL -- Jean-François Lemaire

2 2

Inkscape 0.44 pre 0
by Aaron Spike 27 May '06

27 May '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've just uploaded the tarball for 0.44pre0. Enjoy. I'll upload an autopackage later this evening, if time permits. Aaron Spike -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (MingW32) iD8DBQFEdiS01wsJX4VXgboRAiXmAJ9NNB0X2rmdsyqd2ZfW38tY8oh6YwCfdsOo H9co6+ACNF6aFkcv0pPQRh0= =8ANG -----END PGP SIGNATURE-----

2 1

Re: [Inkscape-devel] Re: Inkscape 0.44 pre 0
by Bryce Harrington 26 May '06

26 May '06

On Fri, May 26, 2006 at 09:03:28PM +0300, Spyros Blanas wrote: > Is it possible to build and distribute a win32 binary as well? Many > people use Inkscape on Windows and we could benefit from their feedback > as well. Aaron just does the official tarball; other packagers will hopefully supply binaries for the other systems. Bryce > Also, please upload your key to a public keyserver (like pgp.mit.edu)! > > Thanks, > - Spyros Blanas > > > Aaron Spike wrote: > > I've just uploaded the tarball for 0.44pre0. Enjoy. > > > > I'll upload an autopackage later this evening, if time permits. > > > > Aaron Spike > > > > ------------------------------------------------------- > All the advantages of Linux Managed Hosting--Without the Cost and Risk! > Fully trained technicians. The highest number of Red Hat certifications in > the hosting industry. Fanatical Support. Click to learn more > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=107521&bid=248729&dat=121642 > _______________________________________________ > Inkscape-devel mailing list > Inkscape-devel(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/inkscape-devel

1 0

Re: [Inkscape-user] Re: Grid questions.
by Black Fire 26 May '06

26 May '06

Abrolag <abrolag@...16...> wrote: > A point I would add is that I always put an 'invisible' rectangle > around components that I have defined, that has zero thickness lines > of no colour, and is an *exact* multiple of the grid size. The whole > object is then grouped. This makes it far easier to precisely align > them, and also makes it practical to keep a file that is a library of > such components for later re-use. This reminds me of an idea that could be recycled: Electronic circuits as blocks. Fit all of your compenents to the same sized invisable square. Draw the connections to the midpoint of the sides of the squares. Then when compenents are placed against each other, they connect. Of course, this is only suitable for simple circuits, but it would be possible for a program to analyze the SVG file and interpret the circuit, possibly even generating Javascript for a suitable viewer to simulate the the operation. -- _______________________________________________ Search for businesses by name, location, or phone number. -Lycos Yellow Pages http://r.lycos.com/r/yp_emailfooter/http://yellowpages.lycos.com/default.as…

1 0

Inkscape on Windows
by Peter Hillier-Brook 26 May '06

26 May '06

I recently had to remove a virus (actually hundreds) from a friend's machine by kicking his hard disc back to the stone age. As I'm not yet able to convince him of the merits of Linux, I had to re-install Windows ME and I thought it would be good to introduce him to Inkscape. As is probably well known to everyone other than me, this is apparently not possible because of GTK+ requirements and the installation failed. However it didn't fail tidily and the first indication that something was wrong was when I tried to start the apparently installed application. Obviously I needed to un-install the package, but couldn't do it easily because there was no entry in the Control Panel|Add or Remove Programs table. In consequence I had to clear the Inkscape components manually, including the Registry. If some versions of Windows are not supported I would have expected the Windows installer to check its environment before creating directories, Registry entries, Icons etc.? Do I need to raise a bug, or is this issue already known? Peter HB

4 6

Re: Grid questions.
by unknown＠example.com 25 May '06

25 May '06

> I've not quite grasped how the grid works (it helps a lot!), but I'm drawing > some schematics and I need millimetric precision (literally), so I need each > square to be precisely 1mm2 and the nodes to snap to them... Now the > "problem" I have is that I don't quite understand what the "adjust distance" > attribute of the grid does and to what value set that. Any help will be > appreciated. I've recently been using Inkscape for schematics / block diagrams, which involved a lot of grid work. It sounds like you are referring to the "Snap distance" field on the "Grid" tab of the Document Preferences. As far as I have found, this value is the maximum distance the cursor must be from a grid point before it will snap there. e.g. if you have a 1x1mm grid, and snap distance is set to 0.25mm, then if you have the cursor in the centre of that grid square, it will not snap anywhere. To make sure the cursor will always snap to the nearest grid point, snap distance should be at half of the grid spacing value. (It doesn't seem to make any difference if it is larger, so I just set all three values to the same). Also, for schematic work, I have found that it is best to turn off the "Snap bounding boxes to grid" option, because with this on, horizontal and vertical lines will snap in three ways: first one edge will snap to the grid, then its centre line, and then the other edge. Ken

3 2

batch command using potrace
by unknown＠example.com 25 May '06

25 May '06

hi there. I would like to convert a batch of bitmaps into vector graphics using a set potrace command. Any help in identifying the switches would be really appreciated. I am using inkscape v.41 thanks steve

4 7

Re-download SVN stuff I broke?
by Michael Moore 25 May '06

25 May '06

Slightly OT perhaps, I downloaded the Inkscape SVN a few days ago, and have been poking at it to try to understand it, and managed to break some stuff. I'd like to download the latest version again, and just overwrite my changes. Is there an easy way to do that? I'd rather not download the whole thing again. Thanks, -- Michael Moore ------------------------------- www.stuporglue.org -- Donate your used computer to a student that needs it. www.ubuntu-utah.org -- In Utah? Interested in Ubuntu? Come join us.

3 3

Grid questions.
by Thetargos 25 May '06

25 May '06

I've not quite grasped how the grid works (it helps a lot!), but I'm drawing some schematics and I need millimetric precision (literally), so I need each square to be precisely 1mm2 and the nodes to snap to them... Now the "problem" I have is that I don't quite understand what the "adjust distance" attribute of the grid does and to what value set that. Any help will be appreciated.

1 0

output filter not recognized
by Black Fire 25 May '06

25 May '06

I'm running Inkscape 0.43 on Windows XP SP2 I have attempred to find whatever log file Inkscape might be writing, but can not find any such log files, so I do not know what is happening. Is there a command line option that turns on logging relavent to extensions? I am trying to write a custom SVG output filter. I started by making a copy of the svgz_output.inx extension. My extension just does nott not appear in the Save As dialog. I do have Perl installed. I use it for other purposes. It is in the PATH by default, so any application should be able to find it. I have paired down my INX file to a very simple test: <inkscape-extension> <name>Extension Test Output</name> <id>org.inkscape.output.test</id> <dependency type="extension">org.inkscape.output.svg.inkscape</dependency> <dependency type="executable">perl.exe</dependency> <output> <extension>.test</extension> <mimetype>text/x.test</mimetype> <filetypename>Extension Test(*.test)</filetypename> <filetypetooltip>Extension Test</filetypetooltip> <dataloss>FALSE</dataloss> </output> <script> <command reldir="path">perl -e "print join(' ',@ARGV)"</command> <helper_extension>org.inkscape.output.svg.inkscape</helper_extension> </script> </inkscape-extension> Any idea why this isn't even appearing? Or at least how I can get usable error messages to help me find out? -- _______________________________________________ Search for businesses by name, location, or phone number. -Lycos Yellow Pages http://r.lycos.com/r/yp_emailfooter/http://yellowpages.lycos.com/default.as…

3 2

export to svg?
by j michaelson 25 May '06

25 May '06

hello, can anyone recommend any svg to dxf converters? i'm having trouble finding any. i need recommendations for both linux and windows. open source if possible. thanks. john michaelson.

2 2

Re: Object group origins / anchor points, and subgrids
by unknown＠example.com 25 May '06

25 May '06

> On Wed, May 24, 2006 at 03:02:29PM +0000, Bryce Harrington wrote: > > > * You could define an origin/anchor point for a group, so > > only that point will snap to the grid....this would mean > > your circuit symbols and blocks would always line up with > > their connecting lines. > > This can't be done presently, but it would be *very* handy. I recall > writing a feature request for something like this long ago, so it's > already in the tracker. We just need someone to work on it. > > > * You could set different grid settings for groups, so that > > you can do fine detail editing to your symbols, without > > having to reduce/increase the grid settings every time. > > > > (Also some shortcuts to automatically reduce/increase the > > grid spacing x5 or x10 would probably be useful, and maybe > > they should also zoom too...........are shortcuts > > configurable enough already to be able to do this?) > > These are interesting ideas, and I don't recall seeing them proposed > before. You could check in the Request For Enhancement (RFE) tracker > through the website, and see if this has already been proposed; if so, > add your thoughts to it, or if not, add a new request for it. > Thanks for filling me in on all this. When I get a chance, I'll have a look through the RFE tracker and add/amend entries on these. > > One other cosmetic thing I noticed was that all the dialogs > > were different sizes (on my Windows Inkscape 0.43 at least). > > It would be nice if they had the same widths or heights so > > they could be lined up tidly around the sides of the main > > Inkscape window. > > I think the idea has been to keep them to the absolute minimum size so > they don't use up more screen realestate than necessary. However the > dialogs are coded to remember their height/width settings from session > to session, so I think you should be able to resize them to your > preference and they should stick that way. It's possible > this doesn't work on Windows, though (I haven't tested it there), but > that'd be considered a bug. ;-) > Yeah, it looks like it could be Windows-specific alright...I'll have to check out the Linux version to see. The problem I was having was more that the minimum size of the dialogs was very big (e.g. the document prefs dialog had a minimum width of about 1/5 the screen - this is at 1600x1200 with Windows XP "normal" font sizes). A lot of the text input fields seemed much wider than necessary, so it might be something to do with calculating the width of these text fields. Thinking about lining up the dialogs again, my motivation for this was that since all windows are rectangular, and you're most likely going to have a drawing window and more than one dialog on the screen at any one time, there's going to be "dead" space unless the dialogs share the same width or height. The picture I have is of several dialogs of the same width down one side of the screen, and optionally dialogs of the same height across the top/bottom, with the drawing window using the remainder of the screen. (Of course this wouldn't be the best for people with small screens) A nice way to offer this to the user might be to have a "Tile Dialogs" option, like the "Tile Windows" you often see in multi-document GUI apps. I'll put in an RFE for something like this too if there's nothing similar already. Some other random observations...which I'll also keep an eye out for in the RFE tracker... * Marker color really should change with that of the path to which it is attached * More control over marker size would be great * Is it right to always center the markers on the end nodes of the line? It is for circular markers, but not for arrows (think of a flow diagram with arrows connecting boxes), and sometimes not for other shapes. * The drop-down list for selecting markers is pretty cumbersome, this would be much better as a 2d grid (with the marker names left out, or else popping up as tooltips). Even better might be to have a separate dialog like the swatches dialog for markers. * If you are editing a document created elsewhere with fonts that are unavailable (e.g. editing on Windows, document created on Linux with Ghostscript fonts), the text tool will not pick up the font size, so making any edit to the text will change the font size to whatever is currently set in the text tool. * When editing baseline-adjusted text, the baseline-adjust is not maintained logically, e.g. if the text was "Vout" where "out" is baseline-adjusted, it is not possible to replace the "o" with another character without the baseline being reset for the new character. * Probably too specialised to be used very often, but a CAD-style snap-to- tangent / end-point / mid-point / center / etc. would be nice. * It should be possible to edit the stroke settings for a group (at least if the settings for all objects in the group are the same) Regards, Ken

2 1