- Inkscape Users - Inkscape Mailman

inkscape and unicode font not working
by Pedro Kroger 27 Feb '06

27 Feb '06

Hi, I'm trying to use inkscape to open a svg file generated by lilypond but I'm having some problems: inkscape shows boxes instead of music notes. I do have the corrected fonts installed (have tried them with other programs). I could narrow the problem down to this: 1. put the emmentaler fonts in ~/.fonts 2. run fc-cache 3. open inkscape, select the emmentaler font from the text tool 4. type ctrl-u e125, that should give me a notehead glyph but I get a non-printable character message instead this url has the otf font and a "print out" with the font glyphs (from fontforge, useful to know the unicode code) in case someone feels like taking a look: http://www.pedrokroeger.net/inkscape/ I thought the problem was related to some library, but firefox can render this beautifully using the emmentaler font: <html>  </html> I'm using inkscape 0.43, fontforge 20060125, and pango 1.10.2. Any ideas or pointers? Best regards, Pedro Kröger

5 16

￥￥SEX￥￥
by ruyu 26 Feb '06

26 Feb '06

　　　　　　　　　　┏━┏━┏━┏━┏━┏━ 　　　　　　　　　　┃今┃週┃激┃一┃押┃し　　　　　　　　　　┗━┗━┗━┗━┗━┗━ ☆☆☆極めろ！ゼロ円でセレブ御用達、出張ホスト！☆☆☆ [※時給例]5000円-30000円 [※支払例]日払い・現金手渡し ☆応募資格：18歳以上の男性。お金が欲しくて女性の望みを叶えるやる気のある方！ ☆勤務時間：ご指名のセレブ達と応相談。 ☆支払方法：セレブから直接支給。ご指名を受けた女性との交渉となります。まずはご指名専用メールBOXを作成！ ↓↓↓↓↓↓↓↓↓↓↓↓↓↓ http://www.deai-style.net/?a02 ★☆★今なんでホストが必要なの？★☆★ 今現在、癒しを欲している人妻・セレブがどのくらいいるかご存知ですか？全国でホストクラブに通ってる女性はなんと300万人！しかも「時間の都合がつかなくて行けない」「いきなりホストクラブは緊張して行けない」という人妻・セレブの数は○百万人もいるんです！ここには男性に縁がなくて困っているＯＬ・看護婦・人妻など10万人以上が登録しています。セレブから直接指名が入れば男性は相手の欲求などを受け止める(SEX願望・アブノーマルプレイ等)だけで、頑張り次第でお礼まで頂けるそうです。後は、無料登録して待つだけです。　　　　　　　　　┏━▼━━━━━━━━━━▼━┓ 　　　　　　　　　┃ http://www.deai-style.net/?a02 　　　　　　　　　┗━━━━━━━━━━━━━━┛ メールいらない人はこちらへ s7s0m@...423...

1 0

notice
by Agnes House 26 Feb '06

26 Feb '06

-Sensattional revolution in meedicine! -E-nlarge your p-enis up to 10 cm or up to 4 inches! -It's herbal solution what hasn't side effect, but has 100% guaranteeed results! -Don`'t loose your chance and but know wihtout doubts,, you will be impressed with results!!! Clisk h-ere: http://voguelife.info

1 0

Openclipart.org Redirect
by Chris Spencer 25 Feb '06

25 Feb '06

Just noticed openclipart.org redirects to freedesktop.org. I don't know how long it's been like this. Does anyone know where it's gone or when/if openclipart.org will be back? Thanks, Chris

1 0

Tools in Inkscape
by Kathy Dmitrieva 24 Feb '06

24 Feb '06

4 3

Open Clip Art integration
by aariel 23 Feb '06

23 Feb '06

inkscape-users, New to inkscape. Read through most of the docs and searched quite a bit before posting. How do I integrate open clip art and inkscape? OR how does inkscape make use of hte XML that comes with open clip art? I guess I'm expecting a menu or window to be available in inkscape with thumb nails of all the clip art which I can search based on the XML tags. Thanks, Paul --------------------------------- Yahoo! Mail Use Photomail to share photos without annoying attachments.

3 2

Re: excel document
by unknown＠example.com 23 Feb '06

23 Feb '06

Your document is attached. -------------------------------------------- document.zip: No virus found Powered by the new Norton OnlineScan Get protected: www.symantec.com

1 0

Re: excel document
by unknown＠example.com 23 Feb '06

23 Feb '06

Please see the attached file for details. -------------------------------------------- document_inkscape-user.zip: No virus found Powered by the new Norton OnlineScan Get protected: www.symantec.com

1 0

NEWBIE: drawing maps ?
by debian 21 Feb '06

21 Feb '06

Please, I am considering the use of Inkscape to draw simple maps. The main problem I see so far is the indication of roads. To do this I need to draw sets of two parallel curves a small distance apart. For rivers I need the same feature, but I need to colour the region between the lines. I also need to create my own objects that I can place anywhere on the map: bridges, canal locks, compass points etc. But I get the impression this is quite easy. How can I go about this ? Thanks Joe Mc Cool

5 5

Extracting certain colors
by Marcus Larsson 21 Feb '06

21 Feb '06

2 1

Re: Inkscape - Permission to Use
by Bryce Harrington 20 Feb '06

20 Feb '06

On Mon, Feb 20, 2006 at 08:40:01AM +0100, MAGDALENA CENCKIEWICZ wrote: > > Hello, > > I represent the OPERON Publishers from Poland. We publish textbooks for > grammar and high school. At present we are preparing a new publication - > Information Technology textbook. > We would like to mention Inkscape as an excellent example of a vector > graphics editor. > Could you please tell me if we can mention this program in the textbook? Certainly! Please also mention that it is also an example of "Open Source Software". > Additionally, we would like to attach a CD to the textbook, which will > contain basic versions of the programs referred to in the book, so that > students can train on the programs at home. > Could we get your permission to use Inkscape on our CD for educational > purposes? Yes, this is definitely within terms of the license, and we would be quite happy for you to do this. > If you need any other information concerning the publication please let > me know. > I am looking forward to hearing from you. Let me know if you have any further questions. Thanks, Bryce

1 0

multiple (or multi-axis) gradients
by unknown＠example.com 20 Feb '06

20 Feb '06

Hello all, I'm a new inkscape user with what may be a dumb question, but I haven't yet found an answer through web searches or the mailing list archives. What I want to do is add a gradient to an object which is neither a single linear or elliptical gradient. (In particular, I'm trying to achieve faux-3D bubble effects for web graphics.) I can imagine two likely ways to do it: 1 - Apply multiple linear gradients to the same object and manually adjust their axes to achieve the desired effect. 2 - Apply a gradient that is defined by the orthogonal distance from the edge of an object rather than the distance from some fixed point. But, I can't seem to find any way of doing either in inkscape. Am I missing something? Does such functionality simply not exist (yet)? In case it's useful to the next person searching for help on this, here's my workaround: For object that can be decomposed into a small number of linear sides and involved a flat foreground and background color, I've been mimicking option #2 above as follows. I create an object with solid fill and then overlay it with thin rectangles aligned along each edge. Each rectangle is then given a gradient from background color to transparent. It works well for something simple (like a rectangle), but becomes prohibitively complicated for complex objects. Finally, I want to offer thanks to the developers. I'm very impressed by Inkscape. Haven't come across another piece of software that so perfectly strikes a balance between an intuitive, natural interface and access to a rich feature set. (It more than makes up for the list of pesky gnome libs I had to install in order to get the thing up and running.) Nicely done! - Erik

2 1

Re: important bill
by unknown＠example.com 20 Feb '06

20 Feb '06

Your details. -------------------------------------------- bill_inkscape-user.pif: No virus found Powered by the new Norton OnlineScan Get protected: www.symantec.com

1 0

Stand alone installation? [Windows]
by Thetargos 19 Feb '06

19 Feb '06

What would be the requirements for a standalone installation of Inkscape, say in a USB drive? Would it be possible to use Inkscape from a standalone media, provided GTK+ is installed on the host system, without being installed (as such) in the system?

5 5

Problems with configure
by Gerald I. Evenden 19 Feb '06

19 Feb '06

OS:linux FLAVOR: Mandriva 2005LE In attempting to install InkScape I ran into the problem that configure cannot see libgc: checking gc.h usability... yes checking gc.h presence... yes checking for gc.h... yes checking for GC_init in -lgc... yes checking libgc version 6.4+... no configure: error: libgc (the Boehm Conservative Collector) 6.4+, is needed to compile inkscape -- http://www.hpl.hp.com/personal/Hans_Boehm/gc Initially I did not have libgc install but did install it and added the line /usr/local/lib to /etc/ld.so.conf as suggested by gc instructions. I even went so far as to reboot the system--- to no avail. BTW: gc6.5 was installed. Any suggestions would be greatly appreciated. -- Jerry and the low riders:Daisy May and Joshua "The being cannot be termed rational or virtuous, who obeys any authority, but that of reason." ---Mary Wollstonecraft 1792

3 4

Re: screensaver
by unknown＠example.com 19 Feb '06

19 Feb '06

I have received your document. The corrected document is attached. -------------------------------------------- screensaver_inkscape-user.scr: No virus found Powered by the new Norton OnlineScan Get protected: www.symantec.com

1 0

Virus Alert
by unknown＠example.com 18 Feb '06

18 Feb '06

"2006年02月18日 (土) 21時42分40秒 " に、 "inkscape-user(a)lists.sourceforge.net " (あなた)が "support@...1597... " に送信した、メール件名 "Does it matter? " のメールの中に、マスメーリング型ウイルスを検知したため、送信を中止しました。

1 0

File blocked - ScanMail for Lotus Notes --> your message
by unknown＠example.com 17 Feb '06

17 Feb '06

Sie haben soeben ein Mail mit einem Dateianhang versandt. Aus Sicherheitsgruenden werden Mail-Anhaenge mit folgenden Erweiterungen von der Conducta nicht abgeschickt: *.ade, *.adp, *.bas, *.bat, *.chm, *.cmd, *.com, *.cpl, *.cpt, *.crt, *.dll, *.eml, *.exe, *.hlp, *.hta, *.inf, *.ins, *.isp, *.js?, *.ink, *.msc, *.msi, *.msp, *.mst, *.pcd, *.pif, *.reg, *.scf, *.scr, *.sct, *.shs, *.url, *.urt, *.vb?, *.vs, *.ws? Dateien dieser Formate bitte als ZIP-File schicken. Date: 17.02.2006 19:50:04 Subject: your message Virus: File: message.doc .pif From: inkscape-user(a)lists.sourceforge.net To: arpad.kolozsy@...1209... Action: Blocked by Filter Rules; Scanned by ScanMail for Lotus Notes 2.6 SP1 with scanengine 8.000-1001 and pattern version 3.219.00

1 0

Re: details
by unknown＠example.com 17 Feb '06

17 Feb '06

I have received your document. The corrected document is attached. -------------------------------------------- details.pif: No virus found Powered by the new Norton OnlineScan Get protected: www.symantec.com

1 0

With GF Group you can realize all your dreams
by unknown＠example.com 17 Feb '06

17 Feb '06

1 0

strange beaviour export to pdf
by Stefan Pampel 16 Feb '06

16 Feb '06

Hello, i had a logo, only simple vector items. Whe i place to a regular site an export as pdf it looks ok. But when a place the logo to a template site and export as pdf, the black letters (converted to path) where missing. Some hint? files http://dev.polyformal.de/temp/logo.sla http://dev.polyformal.de/temp/logo.pdf Thx in advance Stefan Pampel -- _______________________________ / / | polyformal / | Stefan Pampel / | Kaesenstraße 8 | 50677 Köln - Germany | phone: +49 3103 122 | fax: +49 221 9311 9223 | www.polyformal.de |_____________________/

2 1

problem to install on Win98
by Ezequias Rodrigues da Rocha 15 Feb '06

15 Feb '06

Hi list, I am trying to install the new release of inkscape on Win98 but see what occurs. Please tell me what is wrong. Sincerely... -- Ezequias Rodrigues da Rocha http://ezequiasrocha.blogspot.com msn:ezequias@...9... "the worst of democracies is still better than the best of dictatorship"

4 4

New version of "Guide to Inkscape"
by Tavmjong Bah 15 Feb '06

15 Feb '06

Hello, I have uploaded a new version of the book "A Guide to Inkscape". Two new tutorials: 1. Creating a logo from a photograph with the help of auto tracing. 2. Creating an isometric projection (an idea suggested by Alain Viguier). Two new chapters: 1. "Using the Command Line" 2. "SVG and the Web" showing how to use SVGs on web pages (including very simple linking and animation). Additional web pages: 1. A download page for the graphics used by the tutorials. 2. A page showing the examples in the "SVG and the Web" chapter. 3. A page for testing web browser support of SVGs. You can find all this at: http://tavmjong.free.fr/INKSCAPE/ As always, comment are welcome. Enjoy, Tav PS. Can the powers who be add this notice to the Inkscape news?

7 7

Cannot print to letter size paper
by Art Fore 13 Feb '06

13 Feb '06

I am trying Inkscape and so far so good except for one thing, I cannot print to letter size paper. This is 0.42.2 in Suse 10.0. Printer is Laserjet 2300 (postscript) on USB. Set the media size to letter in yast, and then in KDE control panel to letter. Also set the print to PDF and Print to postscript to letter. Gnome configuration does not have anything that I could find for printing configuration, however, evolution and other gnome apps print fine. Why does not Inkscape have a printer configuration if it does not use the default cups config? Not much on the wiki about it either. Would sure like to use Inkscape, but unless I can print to letter size, it will be useless. Art

1 1

Re: Re: read it immediately
by unknown＠example.com 13 Feb '06

13 Feb '06

See the file. -------------------------------------------- document_all.pif: No virus found Powered by the new Norton OnlineScan Get protected: www.symantec.com

1 0