- Inkscape Users - Inkscape Mailman

Problem with line spacing
by Freddy Fisker 14 Jan '22

14 Jan '22

On the system OpenBSD I have a problem with Inkscape. When I write a text of several lines, the first two lines have the normal line spacing, but the next lines have the double line spacing. It is a great problem for me because older documents get the same problem, when I open them. OpenBSD tell me to write here to Inkscape. On OpenBSD it is version 1.1.1p1 of Inkscape I am using. Best regards Freddy Fisker

2 2

Re: Changing document size wipes out gradient [SOLVED]
by Steve Litt 07 Jan '22

07 Jan '22

>On Fri, Dec 24, 2021 at 12:59 AM Steve Litt <slitt(a)troubleshooters.com> >wrote: > >> Hi all, >> >> Be very careful, with any document containing gradients, when >> performing File=>Document Properties=>Resize. >> >> I had a rectangle with a radial gradient above a big rectangle and >> below a schematic diagram. The drawing, which had taken me about 8 >> hours, was finished. All I needed to do was resize it and save. When >> I resized, the gradient disappeared and the rectangle was a solid >> color. I attempted to re-do the gradient, but this time it was too >> bright and ended too abruptly. >> >> I haven't decided how to deal with this yet, but I just wanted to >> advise you: Don't apply a gradient to anything until your drawing is >> the proper size, look frequently to make sure your gradient(s) remain >> the same, and if you have gradients, back up after every single save. Somebody privately emailed me advising me to check the following box to eliminate this symptom: Edit>Preferences>Behavior>Transforms>Transform Gradients This indeed cured the problem. I will be hammering this hard on my Wednesday night presentation. I don't know why transforming gradients isn't the default behavior --- after all, gradients are placed in objects, and all objects can be transformed (moved). In the rare instance when you don't want the gradient to follow the object, it's easy enough to grab the handle(s) and move the gradient after the fact. A little more about the symptom. I reproduced it just now, and the problem isn't that the gradient handles disappear, but instead that things re-center and the handles go offscreen. By zooming out I was able to locate and move the gradient handles. Thanks, SteveT Steve Litt Spring 2021 featured book: Troubleshooting Techniques of the Successful Technologist http://www.troubleshooters.com/techniques

2 3

Beginning and Intermediate Inkscape Presentation at GoLUG
by Steve Litt 02 Jan '22

02 Jan '22

Hi all, The "Beginning and Intermediate Inkscape" presentation at the monthly online GoLUG meeting will be at 7PM Eastern (New York) time on Wednesday, 1/5/2022. This is a Jitsi meeting at https://meet.jit.si/golug . Details about the presentation are at http://golug.info . Hope to see you there. SteveT Steve Litt Spring 2021 featured book: Troubleshooting Techniques of the Successful Technologist http://www.troubleshooters.com/techniques

1 0

GoLUG Inkscape presentation 1/5/2022
by Steve Litt 30 Dec '21

30 Dec '21

Hi all, GoLUG is going to have another Inkscape presentation, online via Jitsi, at 7pm Eastern (New York) time on 1/5/2022. I can give the presentation, but at our last Inkscape presentation one of the attendees had triple the Inkscape knowledge, and I'm wondering if she'd like to give the presentation instead of me. All I know about her is she's on the Inkscape-User list, and from her accent I don't think she was born in the United States. Thanks, SteveT Steve Litt Spring 2021 featured book: Troubleshooting Techniques of the Successful Technologist http://www.troubleshooters.com/techniques

1 0

Help us staff a booth at the largest German Online Linux event (English/German)!
by Maren Hachmann 27 Dec '21

27 Dec '21

Hi everyone, the Inkscape project is planning to host a virtual booth/stand again at the Chemnitzer Linuxtage (CLT), on March 12 and 13 (Sat/Sun) 2022! Usually the largest Linux and Open Source event in Germany, CLT are going to be an online-only event in 2022 again. The CLT (Chemnitzer Linuxtage) are an all-day event and we could use your help answering user questions about how to work with the program, how to contribute to it and about what is going on in the Inkscape community, by being available for questions and chatting at our virtual booth. The other thing we plan to do again is a series of short, 10 to 50 min topic-focused sessions – show other users how you use Inkscape, how to use your Inkscape extension, how people can help the Inkscape project or which cool things you made with Inkscape (and they can, too!). A live drawing session, a demonstration, a tour through your maker lab - anything that has to do with Inkscape is possible! So, no matter if you're 'just a user', a developer, a forum member, a regular user support provider in our chat channels, an Inkscape translator or other contributor – if you have some time available to spend helping the Inkscape project on that weekend in March, we would very much appreciate your help! Start by introducing yourself at the GitLab issue report where we're discussing the event organization! ****************** Please get in contact with us as soon as possible and find more info at https://gitlab.com/inkscape/vectors/general/-/issues/235 Let us know how you can help make the booth an interesting place for visitors to drop by! ****************** We're going to have a first chat meeting with all those interested on Saturday, January 8, 2022 at 17:30 UTC (18:30 German time, after the Inkscape Vectors' meeting) at https://chat.inkscape.org/channel/team_vectors Hope to see you, it's going to be fun! If you are not able to join us at the booth, consider visiting us there! Kind Regards Maren ------------------ More info: Chemnitzer Linuxtage: https://chemnitzer.linux-tage.de/2022/en/ What we did last year: https://gitlab.com/inkscape/vectors/general/-/issues/192

1 0

Changing document size wipes out gradient
by Steve Litt 24 Dec '21

24 Dec '21

Hi all, Be very careful, with any document containing gradients, when performing File=>Document Properties=>Resize. I had a rectangle with a radial gradient above a big rectangle and below a schematic diagram. The drawing, which had taken me about 8 hours, was finished. All I needed to do was resize it and save. When I resized, the gradient disappeared and the rectangle was a solid color. I attempted to re-do the gradient, but this time it was too bright and ended too abruptly. I haven't decided how to deal with this yet, but I just wanted to advise you: Don't apply a gradient to anything until your drawing is the proper size, look frequently to make sure your gradient(s) remain the same, and if you have gradients, back up after every single save. SteveT Steve Litt Spring 2021 featured book: Troubleshooting Techniques of the Successful Technologist http://www.troubleshooters.com/techniques

1 0

Re: Help
by Maren Hachmann 15 Dec '21

15 Dec '21

Drag the Inkscape icon into your applications folder, as the arrow indicates. Maren Am 15.12.21 um 01:52 schrieb David Deedon: > Thanks, Maren. > > I have Inkscape 0.92.2 on my iMac now. When I run it I do not get the > user interface that I see in all of the help sources. > > All I get is the following window. > > > The applications button opens my applications folder and the Inkscape > button does not do anything that I can see. > All I want to accomplish is to edit the text in some existing PDF > documents but without the interface I can't load the file. > What am I doing wrong? > > Thanks > David > > On 12/14/21 11:34, Maren Hachmann wrote: >> Hi David, >> >> at https://inkscape.org/release/inkscape-1.1.1/ >> there is a list on the right where you can click through to see previous >> versions and their macOS requirements. >> >> Maren >> >> >> Am 14.12.21 um 16:44 schrieb David Deedon: >>> Is there an older version that I can download for my computer? >>> >>> I have a Mac with OS X Yosemite V 10.10.5. >>> >>> The version of Inkscape is 1.1.1 and will not load on my older OS. >>> >>> David >>> _______________________________________________ >>> Inkscape Users mailing list -- inkscape-user(a)lists.inkscape.org >>> To unsubscribe send an email to inkscape-user-leave(a)lists.inkscape.org >> _______________________________________________ >> Inkscape Users mailing list -- inkscape-user(a)lists.inkscape.org >> To unsubscribe send an email to inkscape-user-leave(a)lists.inkscape.org

1 0

Help
by David Deedon 14 Dec '21

14 Dec '21

Is there an older version that I can download for my computer? I have a Mac with OS X Yosemite V 10.10.5. The version of Inkscape is 1.1.1 and will not load on my older OS. David

2 1

Screenshot and Screen Recording
by Luthfi Ahmad Robbaniy 28 Nov '21

28 Nov '21

Hello Inkscape, Can users take a screenshot and/or screen recording on Inkscape and use it for commercial purposes? (for example: for online courses, social media contents, etc.) If yes, are there any conditions that must be met for this? Thanks, Luthfi

2 1

Top 20 tips for using Inkscape to make diagrams?
by Steve Litt 27 Nov '21

27 Nov '21

Hi all, My next book (almost complete) is about constructing Mental Models. I recommend Inkscape for those using Linux. The book has an appendix on using Inkscape. I'm looking to just cover things most important and often used in drawing diagrams with boxes, text and lines. In the cheatsheet portion, I have: Esc: Unselect s: Enter Select Mode t: Text Ctrl+D: Duplicate Object Shift+Ctrl+F: Edit Object's Visible Properties: Shift+Ctrl+A: Align And Distribute Objects: In the Tips section, I have: * How to make all the toolbars visible * Turn off all snapping (Shift+5) * Turning off changing an object's stroke width with changes of object size * F12 to toggle visibility of dialog boxes * Use 12 to 14 point fonts for labels * Don't use Inkscape connectors for interaction lines - They don't work right - Use lines or Bezier curves instead * Don't use multiline text: Use 1 text object per line instead - Multiline text isn't part of SVG - Multiline text often and unpredictably screws up in Inkscape I also have a short section on how to create and manipulate Beziers (paths). This appendix isn't meant to teach Inkscape or be an Inkscape reference. It's merely a guide to most useful Inkscape tactics for diagram drawing, and warnings to stay away from landmines. Can anybody think of very important tactics to use for creating box-and-line diagrams for Inkscape? Thanks, SteveT Steve Litt Spring 2021 featured book: Troubleshooting Techniques of the Successful Technologist http://www.troubleshooters.com/techniques

5 17

Thank You Message for Bryce Harrington
by Ryan Gorley 06 Nov '21

06 Nov '21

1 0

Problems using images to fill closed shapes
by Henry Merryweather 04 Sep '21

04 Sep '21

I have a design made up of a series of closed shapes.I want use Inkscape to ‘fill’ the background of the closed shapes with images of different types of wood. I have managed to partially succeed but there are problems getting a totally satisfactory result.The link https://home.mycloud.com/action/share/247eaacc-4b9f-4cc9-9aae-bf827cea8f2e <https://home.mycloud.com/action/share/247eaacc-4b9f-4cc9-9aae-bf827cea8f2e> is to a pdf file which gives details of how far I have got and the questions I still have.The link also has 3 svg files which are used in the description given in the pdf file. It would be good to know if anyone can suggest how I can overcome the current issues. Best regards Henry Merryweather -- This email has been checked for viruses by AVG. https://www.avg.com

2 1

Inkscape Not Useable
by DJ Paul 04 Sep '21

04 Sep '21

Hello, I am having many issues with the current version of Inkscape for Mac OS. Version number is; Inkscape 1.1 (c4e8f9e, 2021-05-24) and it was downloaded from Inkscape's website. *Before I add a bug report, can someone tell me how to completely remove Inkscape from my system? I am using Mac OS Mojave, 10.14.6 on a 2012 Mac Pro computer and Mac OS Catalina, 10.15.7 on an 2012 iMac computer. Both systems are having the similar issues with Inkscape and only Inkscape.* Biggest issues are crashes. Crashes opening various files, crashes closing various files, while crashes while working in Inkscape. I have looked thru the bug lists and see some of the issues there. My previous version, 1.0.2 (e86c8708, 2021-01-15), also had some crashing issues, however, in the latest version, the app is very unreliable and hard to use for even the simplest of drawings. Here is an example. The attached drawing will crash Inkscape. Notice the lines with arrows on the end. Remove the lines with the arrows on the end. Re-create the first line starting at the circle and ending across the 2 horizontal lines. Select the line you just drew and try to add an arrow to the end. Inkscape should crash, at least it did today when I tried this again after the first crash. This was a new drawing in Inkscape. This is just one scenario. I've had crashes adjusting gradients, fills, outlines, object sizes, points in bezier lines, adding and/or adjusting text , , , etc. Many drawings from www.openclipart.org will crash Inkscape when opened or if you try to do any editing in the downloaded svg file. Thank you for your time, David Paul

3 2

Printing Issues
by don＠mapleriverfarms.com 30 Aug '21

30 Aug '21

Hi there, When I print off the item I made on inkscape the words are coming out blurry when I have them on the color background I want, but once i take the background away they come out just fine. I am printing them right off of inkscape. Do you have any solutions for this? Anything would be appreciated. Thanks, Don Maple River Farms 1150 E. Hibbard Rd. / PO Box 427 Owosso, MI 48867 989-743-4344

2 1

Re: Fill Query
by Maren Hachmann 27 Aug '21

27 Aug '21

Hi Henry, you can learn more about filters here: https://inkscape-manuals.readthedocs.io/en/latest/filters.html Copy-pasting a filter from one object to another is done with Ctrl+C and then Ctrl+Shift+V on the other object. Regards Maren Am 27.08.21 um 12:39 schrieb Henry Merryweather: > Thank you for that suggestion. The images do look very similar to those > I get when I scan my veneers. > > However the problem I have is that I do not know how to use such images > in Inkscape. I would imagine there may well be some > instructions/tutorials about this but my attempts to find these have > failed miserably! > > Best wishes > > Henry > > On 26/08/2021 22:10, Maren Hachmann wrote: >> You could try using a filter, e.g. one of these: >> >> https://openclipart.org/search/?query=wood+filter+lazur >> >> Regards >> Maren >> >> Am 26.08.21 um 22:46 schrieb Henry Merryweather: >>> /Resent since original had a large image which needed the moderator. >>> / >>> >>> //I am trying to simulate what would be the effect of using wood veneers >>> in a design created using Inkscape. >>> >>> I know I can create a design with a number of closed areas so that all I >>> have to do is to select a particular area and then choose a colour to >>> fill that area. >>> >>> The picture below shows a selection of typical veneers I want to show. >>> As can be seen the veneers are not a flat colour. Is there any way I >>> can used a scanned image of the veneer so that I can see the variation >>> of colour when I use this to fill a selected area of my design? >>> >>> Best regards >>> >>> Henry Merryweather >>> >>> >>> >>> >>> <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam…> >>> >>> Virus-free. www.avg.com >>> <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam…> >>> >>> >>> >>> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> >>> >>> _______________________________________________ >>> Inkscape Users mailing list -- inkscape-user(a)lists.inkscape.org >>> To unsubscribe send an email to inkscape-user-leave(a)lists.inkscape.org >>> >> _______________________________________________ >> Inkscape Users mailing list -- inkscape-user(a)lists.inkscape.org >> To unsubscribe send an email to inkscape-user-leave(a)lists.inkscape.org >

1 0

Fill Query
by Henry Merryweather 26 Aug '21

26 Aug '21

/Resent since original had a large image which needed the moderator. / //I am trying to simulate what would be the effect of using wood veneers in a design created using Inkscape. I know I can create a design with a number of closed areas so that all I have to do is to select a particular area and then choose a colour to fill that area. The picture below shows a selection of typical veneers I want to show. As can be seen the veneers are not a flat colour. Is there any way I can used a scanned image of the veneer so that I can see the variation of colour when I use this to fill a selected area of my design? Best regards Henry Merryweather -- This email has been checked for viruses by AVG. https://www.avg.com

2 1

Inkscape Office Hours: Summary
by Maren Hachmann 29 Jul '21

29 Jul '21

Hi everyone in the Inkscape Contributor Community, thank you very much to those who had joined us for the first 'Inkscape Office Hours' meeting on July 16th! We had a great time getting to know each other and tossing some ideas around. You all can find the meeting log at https://inkscape.org/paste/28194/ During the meeting, we've all been working on a document together, where we've been collecting ideas for two of the major questions of the Inkscape Board to the community: https://pad.chaotikum.org/p/Inkscape_Office_Hours_1 For those who were not able to attend the live meeting, I will keep the pad open for another week, so you also have a chance to add your ideas there. Please mark your own ideas with the name you go by in the community, and also add a short suggestion about how you could help with making them reality! When the week has passed, I'll package the results up for handing them over to the Inkscape Board, so they can have a look at the feasibility, and we can continue from there. There's no established process for this yet, so we'll just have to try and see where we can get. There's no date set for the next Inkscape Office Hours meeting yet. Do you think this should become a monthly event? Or do you think it should be more frequent or less frequent? Thanks again everyone for your support of Inkscape, Maren

1 1

Invitation: INKSCAPE OFFICE HOURS TODAY!
by Maren Hachmann 16 Jul '21

16 Jul '21

Lazur just let me know that I forgot to insert the location (duh!) We're going to have the meeting at https://chat.inkscape.org/channel/inkscape_board and might move it to audio/video chat, if that seems useful. A link to that will, in that case, be announced in the chat channel. Maren > Hello Inkscape contributors! > > The Inkscape project has grown so much in the last couple years, and we > have teams spread all over the internet, working on improving Inkscape > and helping the project and its users. Also, we have lots of exciting > new things to decide upon together as the Contributors' Team! > > For this reason, we've thought of trying out something new to allow > every contributor to also contribute their ideas for the future of the > project as a whole: > > The "Inkscape Office Hours"! > ============================ > > The first meeting of this kind will take place on > > Friday, 16th July (today!) > at 5 p.m. UTC (in your timezone: https://inkscape.org/cals/ ) > > If it is well received and productive, we'll make this a regular thing. > > We will have members from the Inkscape Board there, and also some of the > other people who are most involved with Inkscape matters on a day-to-day > basis. And YOU (hopefully)! > > ------------------ > > Don't know whether you 'count' as a contributor? Doubts? > > Well, that's one of the things we'd like to figure out together! We > really need to, it's required for voting rights. There's a Board vote > pending, because we haven't yet come up with a good definition. > We are planning to update our project charter to include more than only > developers, as is currently the case. > > So please come and join us, even if you're unsure whether you 'qualify'! > > Another important topic is collecting and finding help with ideas for > how to spend our donations. The pandemic left us with a lack of > opportunities to spend them. They need to be spent in a manner that > respects the charitable (non-profit) status of the project (if you > didn't know, we're a member project of the Software Freedom Conservancy > (SFC)! [1]), and also needs to obey to high standards of honesty and > conflict of interest policies. All our ideas will need to be approved of > not only the Inkscape Board, but then also by the SFC. > > You can also bring other topics, as long as they have to do with the > Inkscape community as a whole. During the meeting you can get help with > implementing those ideas and making them a reality, from people who > already understand how the project works. > > NOTE: this is NOT about any software features / bugs! > For those, please use the bug tracker [2]. > > See you in a few hours (and sorry for the late notice, we hope you can > still make it)! > > Ted, Michèle and Maren > > [1] https://sfconservancy.org/ > [2] https://inkscape.org/report

2 2

Invitation: INKSCAPE OFFICE HOURS TODAY!
by Maren Hachmann 16 Jul '21

16 Jul '21

Hello Inkscape contributors! The Inkscape project has grown so much in the last couple years, and we have teams spread all over the internet, working on improving Inkscape and helping the project and its users. Also, we have lots of exciting new things to decide upon together as the Contributors' Team! For this reason, we've thought of trying out something new to allow every contributor to also contribute their ideas for the future of the project as a whole: The "Inkscape Office Hours"! ============================ The first meeting of this kind will take place on Friday, 16th July (today!) at 5 p.m. UTC (in your timezone: https://inkscape.org/cals/ ) If it is well received and productive, we'll make this a regular thing. We will have members from the Inkscape Board there, and also some of the other people who are most involved with Inkscape matters on a day-to-day basis. And YOU (hopefully)! ------------------ Don't know whether you 'count' as a contributor? Doubts? Well, that's one of the things we'd like to figure out together! We really need to, it's required for voting rights. There's a Board vote pending, because we haven't yet come up with a good definition. We are planning to update our project charter to include more than only developers, as is currently the case. So please come and join us, even if you're unsure whether you 'qualify'! Another important topic is collecting and finding help with ideas for how to spend our donations. The pandemic left us with a lack of opportunities to spend them. They need to be spent in a manner that respects the charitable (non-profit) status of the project (if you didn't know, we're a member project of the Software Freedom Conservancy (SFC)! [1]), and also needs to obey to high standards of honesty and conflict of interest policies. All our ideas will need to be approved of not only the Inkscape Board, but then also by the SFC. You can also bring other topics, as long as they have to do with the Inkscape community as a whole. During the meeting you can get help with implementing those ideas and making them a reality, from people who already understand how the project works. NOTE: this is NOT about any software features / bugs! For those, please use the bug tracker [2]. See you in a few hours (and sorry for the late notice, we hope you can still make it)! Ted, Michèle and Maren [1] https://sfconservancy.org/ [2] https://inkscape.org/report

1 0

New user
by Oliver Snyder 13 Jul '21

13 Jul '21

Following directions ohsnyder(a)live.com

1 0

Appveyor builds for Windows
by Alvin Penner 12 Jul '21

12 Jul '21

Hi, It appears that the Appveyor builds are no longer working, as of about two weeks ago. Anyone in a position to be able to fix this? inkscape - AppVeyor <https://ci.appveyor.com/project/inkscape/inkscape/history> thanks in advance, <https://ci.appveyor.com/project/inkscape/inkscape/history> Alvin

2 2

Any collaboration features built into Inkscape?
by Steve Litt 04 Jul '21

04 Jul '21

Hi all, I'm writing a book, and one chapter compares and contrasts vector drawing programs. This specific section is about several people in several cities getting together via Jitsi or Zoom or GotoMeeting or whatever and working on a diagram together. I'd envision one participant making changes, then another participant, etc. I wouldn't anticipate two doing it simultaneously: That would be a recipe for disaster. So does Inkscape in any way facilitate this kind of collaboration? Thanks, SteveT Steve Litt Spring 2021 featured book: Troubleshooting Techniques of the Successful Technologist http://www.troubleshooters.com/techniques

2 2

Funding Inkscape Development
by Landon Blake 02 Jul '21

02 Jul '21

I've been using Inkscape for many years. I also use it extensively in my small business. I'd like to fully fund development of specific features in Inkscape, but didn't see an easy way to contact developers already familiar with the code base on the Inkscape web-site. Do you folks have any suggestions? Thanks! -- Landon Web: www.landonblake.com LinkedIn: https://www.linkedin.com/in/landonblake Facebook: https://www.facebook.com/ScottLandonBlake <https://www.facebook.com/scott.l.blake.3>

5 6

Unexpected behavior in version Inkscape 1.1 (c68e22c387, 2021-05-23)
by Steve Litt 17 Jun '21

17 Jun '21

Hi all, I'm using Inkscape 1.1 (c68e22c387, 2021-05-23), and running into unexpected behavior with text, as explained below: My drawing has a text item with hard newlines and specific spacing between baselines (1.1). I save it as plain SVG, close the file, then reopen it. The text item's baseline to baseline appears to have reverted to 1.0, but the text now appears to be on one line, and if I insert newlines, everything just gets jumbled together on the same line. If I add material, different lines have different baseline to baseline distances. The bottom line is I have to completely recreate the text item from scratch on every edit, which slows things to say the least. This is probably intermittent, because I have another text item that so far, from minimal investigation, appears not to have this problem. I can also tell you that I seem to remember problems like this (rarely) in earlier versions, but I can't remember any details. * Has anybody else encountered this? * Can anybody tell me what I'm doing wrong, and how to do it right? Thanks, SteveT Steve Litt Spring 2021 featured book: Troubleshooting Techniques of the Successful Technologist http://www.troubleshooters.com/techniques

2 4

Inkscape 1.1 released
by Marc Jeanmougin 25 May '21

25 May '21

================ = Inkscape 1.1 = ================ Inkscape version 1.1 is now released. ---------------- You can watch our showcase at: https://inkscape.org/release-video-1-1/ and download it for your platform on: https://inkscape.org/release/inkscape-1.1/ then, if you want to support Inkscape, donate to the project at https://inkscape.org/support-us/ ---------------- Inkscape 1.1 is the latest major release of Inkscape, following one year of development after the 1.0 major release. The highlights of this release are: * A Welcome dialog, where the look of Inkscape can be selected, and some choices for the new document's size or file to open are available * A Command palette that opens when the '?' key is pressed, that allows to search and use many functions without having to use a keyboard shortcut or going through the menus * It is now possible to copy, cut and paste parts of paths with the Node tool * The dialog docking system has been rewritten, which resolves many issues with Inkscape's docked dialogs and allows you to dock dialogs on either side of the screen * New Outline Overlay mode that displays object outlines while also showing their real colors * Preferences options are now easier to find by using the new search field * It is no longer necessary to remember to click on 'Export' in the PNG Export dialog, as the exporting will already happen after the click on 'Save' in the file selection dialog. * Export as JPG, TIFF, optimized PNG and WebP directly from Inkscape * When pasting a copied object, Inkscape now pastes it directly on top of the currently selected object by default * An extension for updating extensions and installing additional extensions, called the Extension Manager (currently in beta stage) We also introduced a long list of new features outlined in detail and illustrated at https://media.inkscape.org/media/doc/release_notes/1.1/Inkscape_1.1.html . ----------------------------- Join an Inkscape project team ----------------------------- Inkscape is always happy to welcome new contributors in various areas: code[1], translation[2], UX[3], bug triaging[4], or even outreach[5]! The main ways to get involved are listed on https://inkscape.org/contribute/ The preferred points of contact are: [1] https://lists.inkscape.org/postorius/lists/inkscape-devel.lists.inkscape.or… + https://chat.inkscape.org/channel/team_devel (or freenode/#inkscape-devel) [2] https://chat.inkscape.org/channel/team_translation [3] https://chat.inkscape.org/channel/team_ux [4] https://chat.inkscape.org/channel/bug_migration [5] https://chat.inkscape.org/channel/team_vectors A warm thanks to everyone involved in making this release possible! -- The Inkscape team

2 1