- Inkscape Users - Inkscape Mailman

INKSCAPE GALLERY RC2 ------draw freely...then publish!-------
by davide|inkscapegallery 15 Jul '08

15 Jul '08

There's a lot to say about this new release...you might prefer to see it immediately..so, start from here: http://inkscapegallery.net/home I worked hard for three months to build gimpgallery (http://gimpgallery.net)and it has been recently released... So i had many ideas about how to improve inkscape gallery, i was tired and anxious at the same time... The second feeling won and i'm here to list what i've done in the last days: *The home page* It is a complete section with 4 subsections, "from the inkscape's world", "highlight on", "special sections" and "a little taste of inkscpae gallery". *4 new sections called:* fresh, mostvoted, older and popular *The "inkscape galleria"* it is a slideshow made with a jquery plugin labeled "galleria",indeed. It is quite smart and fast, just to give you another way to see what is best in inkscape gallery: images! *The user's "inkscape galleria"* Every user has his own "galleria" , just click on the link in the title block of each image content *Some layout improvements* In a big website you will always have something you fixed with a workaround, not in the best way, in other words... I've found better solutions now *The "from the inkscape world" section* It is the upper section in the home page. This was not an hard work but is important i mean, just because i'd like to work together with other inkscape based website. *The wysiwyg editor* we have a simple wysiwyg editor now. It works only for logged in users, anyway *The antispam framework* we've never had critical spam problems, you can directly publish in inkscape gallery only when logged in, indeed. we have user profiles, with an email field and i wanted to keep it safe from spam even if you need to be logged in to view the user profiles... (maybe not anymore in the future...) Anyway, the email field is protected from spam, now *The gimpgallery promo* I wanted to make you know about gimp gallery. It is another image gallery website for a free image editor and it is even more advanced compared to inkscape gallery, actually. It is freshly born and quite empty, i had to borrow some images from inkscape gallery so, if you're a gimper, go there to publish your images! This is what, i hope you to like it, there's always something to fix, to improve but that's inevitable (especially on IE) :-) i'm planning the next steps to bring inkscape gallery to the next release! See you, and keep drawing! Da. http://inkscapegallery.net

1 0

LUG Radio UK, Linux World
by Tavmjong Bah 14 Jul '08

14 Jul '08

Hi, I just want to check that there won't be an Inkscape booth at Lug Radio UK. Is that right? Also, is anybody planning on setting up a booth at Linux World? I know there has been one at least once in the past. The publisher of my book is willing to send copies to be displayed at these (or any other) conferences. BTW, the 2nd Edition (for 0.46) should be out soon. Tav

2 1

Inkscape and Latex fonts
by Paulo J. Matos 14 Jul '08

14 Jul '08

Hello all, I use inkscape to create my latex diagrams, then I export them to eps or pdf to include them in slides or papers. One thing that bothers me is that the fonts are different (latex and inkscape fonts). Is there a way to draw the text in the inkscape diagram with the font used on the document the diagram is included? Cheers, -- Paulo Jorge Matos - pocm at ecs.soton.ac.uk http://www.personal.soton.ac.uk/pocm PhD Student @ ECS University of Southampton, UK

4 3

Re: [Inkscape-user] Can inkscape export an .ai file?
by Alvin Penner 11 Jul '08

11 Jul '08

unfortunately, there is a bug associated with that output type, see https://bugs.launchpad.net/inkscape/+bug/235833 Alvin Penner

1 0

Can inkscape export an .ai file?
by Richard Querin 11 Jul '08

11 Jul '08

Hi, I've read in the docs that it can, but I don't get that as one of my choices in the SaveAs drop down list of file extensions. Do I need to install something else to get Adobe Illustrator export working? Thanks ,RQ

1 0

Install 46 on Slackware 12.1
by John Culleton 11 Jul '08

11 Jul '08

It seems that even the latest Slackware is missing a jillion libraries needed by Inkscape. But I note there are complied rpm versions for other versions of Linux. Are these self contained? Or do they need the jillion libraries at runtime? Here is the missing library list from my ./configure: No package 'gdkmm-2.4' found No package 'glibmm-2.4' found No package 'gtkmm-2.4' found No package 'sigc++-2.0' found -- John Culleton Resources for every author and publisher: http://wexfordpress.com/tex/shortlist.pdf http://wexfordpress.com/tex/packagers.pdf http://www.creativemindspress.com/newbiefaq.htm http://www.gropenassoc.com/TopLevelPages/reference%20desk.htm

4 5

SVG source images get goofed up when combined
by Quentin Hartman 10 Jul '08

10 Jul '08

I often use Inkscape to build network diagrams. I've collected a number of SVG images (mostly from Tango Icons) which I use as objects in those diagrams. On my Ubuntu Hardy box today I discovered that once I get a number of objects into a document, if I import a single new object, the colors on it get all messed up upon import. This never happened before. Opening the object alone, or importing it into a new document works fine. Have any of you seen this behavior in .46? If so, have you figured out a work-around? Might it have something to do with the (new?) color management stuff? I chose not to attach files to the list because they are rather large, but I would be happy to send examples to anyone interested in exploring this off-list. -- -Regards- -Quentin Hartman-

4 5

Re: [Inkscape-user] Word balloon tail fill question
by Caryn A. Tate 10 Jul '08

10 Jul '08

Thanks so much for all of the tips. My balloons and their tails are looking much better now! Much appreciated, Caryn EMAILING FOR THE GREATER GOOD Join me

2 1

Word balloon tail fill question
by Caryn A. Tate 09 Jul '08

09 Jul '08

Hi, I have an issue with creating the tails on word balloons for a comic with Inkscape. Keep in mind I'm a brand new user, so I'm sure the solution is a simple one. I use the ellipse tool to create the word balloons themselves, and I use the Bezier tool to create the "tails" to/from the balloons. My problem is that I'm creating the word balloons and tails *on top of* art (utilizing the Layer tool), and I can't find a way to fill the tails solid with white, to prevent the artwork from showing through. I understand how to fill the ellipses themselves and keep them solid, but the tails I can't seem to figure out. Can someone help? Also, I'm completely open to pointers, so if you do something differently than what I described, please let me know. Thanks in advance! EMAILING FOR THE GREATER GOOD Join me

6 9

Inkscape to Silverlight
by Ronn Ross 07 Jul '08

07 Jul '08

Hello all, I'm using the xaml save function in Inkscape to create maps to use in silverlight. The two problems I have ran into are: 1. Inkscape saves the name of an element as name="" instead of x:name="". 2. The lablel of an element is completely dropped instead of converting it into the tag="" attribute in xaml. Does anyone have any ideas of how I can make this change? Thanks in advance

2 3

"chisel effect" with filters?
by Rob Antonishen 06 Jul '08

06 Jul '08

I am using a recent nightly build (and really like the filter effect defaults provided). One think I can't figure out is how to add an exponent to a blurred layer to make embosses more like chisels. Attached is an example from xara that I am trying to emulate. Any suggestions from the filter effect gods? -Rob A>

1 0

Wacom Graphire 4 nuisance
by Alexander Roalter 05 Jul '08

05 Jul '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 After updating my system to OpenSuSE 11 (which required re-installing the nvidia closed-source drivers and first adding another repository for the linuxwacom tools (the system provided cause X to start and crash immediately in a loop)) I found a nuisance which I cannot explain really... If I draw an object, e.g. a filled Rectangle, and then press F1 for the selector tool, I can click anywhere inside the rectangle to have it selected and the modifier-drags appear on the corners. previously (opensuse 10.3) I could do the very same with the mouse, and to my knowledge, this is also the intended behavior. Now, I can draw the object as before, but after switching to the selection tool, I cannot select the object with the pen. I either have to lasso it by dragging a bounding box around it, or 'double-click'/triple-click or whatever on it, but not too fast, otherwise it switches back to edit mode (F4 in the case of my rectangle) If I click on an object with the mouse, the mouse cursor remains the same as by simply hovering over an object, i.e. the hand. If I hover (not press) with the pen, I have the same hand, but once I press on the object, the pointer-cursor reappears. Does anybody have an Idea as why this is happening. Inkscape is 0.46 release, no SVN. - -- Cheers, Alex -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iEYEARECAAYFAkhv594ACgkQ1J0MF2u394zmYgCgoMcmOHD4kqTup6gPtVApGBrA Zm0AnjhetA2hpOE6sWkAx7vzWigtqJT1 =9QQ0 -----END PGP SIGNATURE-----

1 0

Calligraphic tool Thinning/thickenning not working at all
by roger pibernat 03 Jul '08

03 Jul '08

Hi, I'm an Inkscape newbie (but not to vector graphics GUIs). I've found a great (and short) tutorial on simulating engravings with Inkscape ( http://www.inkscape.org/screenshots/gallery/inkscape-0.46-engraving1.png). I'm sure most of you have read/seen it, so I hope someone can help me out on this. I've been following all the steps without any trouble up to "Thinning/thickenning". When I press ALT and drag the cursor (either with Wacom pen or mouse) I get a new path, no thickenning or thinning anywhere... I've tried it right after drawing the paths, after unselecting and selecting them, after unselecting and selecting just one, with the mouse, the pen, the eraser,... getting always de same result. On the status bar I get the hint inviting me to press ALT+drag, but won't work for me... Any clues on what's going on and why can't I use this promising tool?! I'm using freshly installed Inkscape 0.46 on Kubuntu Hardy (8.04), with a Wacom Intuos A3, and brand new PC. Thank you in advance. Cheers, P.S.: this is my first post ever, anywhere. Any hints on how to post better (if I didn't do it right) will be appreciated.

3 3

Vote for new functionality at www.hackontest.org
by unknown＠example.com 03 Jul '08

03 Jul '08

Hello all, A 24-hour contest to program new functionality into an opensource program? => www.hackontest.org Inkscape has registered for participation in Hackontest.org! http://www.hackontest.org/index.php?action=Root-projectDetail(97) This means we need your votes to find out which new functionality you'd like to see us code as quick as we can. Also, we need a lot of votes just to let the Hackontest organization know Inkscape makes you happy ;-) Cheers, Johan Engelen

1 0

Re: [Inkscape-user] Transparent text or text mask.
by loscotec＠libero.it 02 Jul '08

02 Jul '08

Thank you very much for your replies. it was a flowed unflowed text problem. I did not know there were differences in creation method between click and click and drag for text. thank you for teaching it to me! this also solved some problems I had with pattern-filling! thank you.. it is a great improvement for me, even if it would be nice if coders will be able to let all the types (flowed - unflowed and coverted to text) work the same way.. anyone of them as qualities and difects.. but there is no way to use all the qualities of the three. Lucio I found not locale in inkscape directory, but I've found this link: http://wiki.inkscape.org/wiki/index.php/FAQ#I_am_working_on_a_machine_with_… which worked ! :-) .On 6/25/08, loscotec@...844... <loscotec@...844...> wrote: .> Hystrix.. what do you mean with flowed text? And how to unflow it if necessary? please notice that I've got the italian version of inkscape. I wanted to switch to the english one, but I don't know how to do that as well.. !! . .Flowed text is text that automatically insert new lines to adapt to a .shape, usually a rectangle but it can be anything. Here's an example. .To flow text you select both the text and the shape and use the 4th .command from the top on the Text menu. The command below it will .unflow the text. .Also when you create a new text dragging the cursor you make flowed .text, when you just click and release the button it just makes text .not flowed. . .To change the language I think you can delete (or move) the locale in .the Inkscape installation folder. . .. Caminante no hay camino, solo se hace camino al andar .. --- o meglio --- .. Caminante el destino no es al final de el viaje, pero en todo el andar ..

1 0

connector behaviour
by Adrian Lupascu 02 Jul '08

02 Jul '08

Hi everyone, I was wondering if these two things would be possible in Inkscape: a)attach connector end points not only to centers, but also othe rpoints b)have connectors formed by a succession of horizontal and vertical lines Thanks, Adi -- Posted via http://www.ruby-forum.com/.

2 2

Inkshape does not work on MacOSX
by Bernt Hansen 01 Jul '08

01 Jul '08

I run system 10.4.11 on an iBook G4 (this model: http://support.apple.com/specs/ibook/iBook_G4_Late_2004.html). I've downloaded Inkshape and followed the described procedure. When I open the program, another program called X11 also opens. A few seconds after, Inkshape quits, leaving only X11 open. This happen every time. I've tried to download Inkshape again a few months later, and the situation is still the same. bern

2 1

Anyone up to manning a booth?
by Jon A. Cruz 30 Jun '08

30 Jun '08

Hi, I was just wondering if anyone might be up to manning a booth for LugRadio Live UK? http://lugradio.org/live/UK2008/ It is coming up fairly soon, but as of the beginning of the week they still had some room for exhibiting. I won't be able to make it, but the one in the USA was very good. If anyone could make it there to have an Inkscape presence, we could get together demo art, fliers that can be printed, etc.

4 5

Re: [Inkscape-user] Transparent text or text mask.
by loscotec＠libero.it 25 Jun '08

25 Jun '08

Hi everybody, thanks for all the replies, and sorry if I'm not replying you, due to an exam I haven't got much free time. Hystrix.. what do you mean with flowed text? And how to unflow it if necessary? please notice that I've got the italian version of inkscape. I wanted to switch to the english one, but I don't know how to do that as well.. !! Thanks ROb for the example.. it is working, so that helped me understanding that my problem is nor a corrupted installation nor a wrong procedure. Can it be due to font choosen? I tried with many, though.. still no way.. as soon as I will have tried a little further, I will send you an example not working. Thanks very much for your kind help! Lucio .On 6/21/08, loscotec@...844... <loscotec@...844...> wrote: .> Hello everybody! .> .> Does anybody know how to use text as object-mask? .> .> I need to cut a text in a picture so that the text would actually be transparent! .> .> The goal is easily achieved converting text in path, and grouping it with a background, and then using it as a mask for the picture. But in this way I'm loosing the chance to change what is written in a second moment. .> .> Reading some references, I saw that text objects should work as any other objects about masking, but they they don't. .> .> What am I missing? .> .> Lucio .I tried it and found out that it doesn't work with flowed text, maybe .that was your case. If so, can you try unflowing the text? . .------------------------------------------------------------------------- .Check out the new SourceForge.net Marketplace. .It's the best place to buy or sell services for .just about anything Open Source. .http://sourceforge.net/services/buy/index.php ._______________________________________________ .Inkscape-user mailing list .Inkscape-user(a)lists.sourceforge.net .https://lists.sourceforge.net/lists/listinfo/inkscape-user . .. Caminante no hay camino, solo se hace camino al andar .. --- o meglio --- .. Caminante el destino no es al final de el viaje, pero en todo el andar ..

3 2

Tracking dependencies
by Jon A. Cruz 25 Jun '08

25 Jun '08

Hi guys, There's a side issue that's been kicking around for a while now. Inkscape doesn't really have it's dependencies explicitly listed. So things may or may not work for certain users trying to build on certain platforms, OS versions, etc. For example, I put in a patch recently that uses g_timeout_add_seconds (). In the documentation on it, the function is listed as "Since 2.14". So that bumps the requirement to have glib2 >= 2.14. However that would make things no longer work on Fedora 7 and instead bump Fedora 8 as the minimum there. Since that's only a year old, the might be a bit too soon to bump. Anyway, this highlights a need we have to be tracking what we bump and what impact it will have. This is something that even non- programmers can help with, so I've added a quick section and link to the Help Wanted wiki page: http://wiki.inkscape.org/wiki/index.php/ HelpWanted#Determining_Dependencies A first step would be if people skimmed through the glib and gtk+ docs looking for newer functions. Then adding those that are in our codebase to the "Functions Used" table on the wiki could really help: http://wiki.inkscape.org/wiki/index.php/ Tracking_Dependencies#Functions_Used Then if someone has a distro they care about, they can add it and/or fill out details for at at http://wiki.inkscape.org/wiki/index.php/Tracking_Dependencies#Distros Finally, the developers can get a handle on creeping dependencies, and perhaps add a few #ifdef's or alternate methods where needed in order to keep things sane.

1 0

Transparent text or text mask.
by loscotec＠libero.it 23 Jun '08

23 Jun '08

Hello everybody! Does anybody know how to use text as object-mask? I need to cut a text in a picture so that the text would actually be transparent! The goal is easily achieved converting text in path, and grouping it with a background, and then using it as a mask for the picture. But in this way I'm loosing the chance to change what is written in a second moment. Reading some references, I saw that text objects should work as any other objects about masking, but they they don't. What am I missing? Lucio

4 3

SVG and the web Part II, subheading SVG vs Flash
by Patrick 23 Jun '08

23 Jun '08

Hey Everyone There was a great thread about SVG and the web a few months ago. I re-read it but I am still a little confused about something. I have a long term project that will involve charting and mathematical processing of peaks that are plotted out. An SVG based chart might be just the thing. The scientists that would use this could be prompted to download Firefox as this online tool that I am hoping to create could save them a lot of money over the desktop versions out there, so IE is not an issue. So to get to the point I was just wondering about the state of SVG support now and guesses on the state a year from now. I would also love to make this site SVG only, any guesses as to when someone could make a fully functional SVG only site? Google does not index SVG only sites but Google can basically only see text. Do you think I would get blacklisted if I created a text only site and found a way to re-route Google through browser identification? Any thoughts on other work arounds? I am also trying to learn about open source flash. With proprietary flash distributed so far, does (open or closed) flash present a serious danger?If not is there another? I know SVG is great but I heard that Beta was also better then VHS, the best technology does not always win, what is standing in our way? My plotting application would be an enormous investment of time, is it possible that SVG will end up another Beta? Please delete the "subheading SVG vs Flash" if you have other SVG web thoughts, I loved the last thread and I would love to read any discussions pertaining to SVG and the web. ThX-Patrick

5 5

Re: [Inkscape-user] Transparent text or text mask.
by loscotec＠libero.it 23 Jun '08

23 Jun '08

It is! (When I apply the mask I don't actually see the bitmap) I even tryed selecting all the stuff in a different order.. no way! :( Lucio ...Yes, I did try it. And it worked fine. . .Do you have the z-order correct? The bitmap must be below the grouped .text/rectangle. . .-Rob A> . . . .On 6/23/08, loscotec@...844... <loscotec@...844...> wrote: .> Thanks Rob, but.. did you try it? Is it working for you? It doesn't for me. .> Neither in home computer, nor in the one I have got where I work.. .> .> As far as i use some text, grouped or not with some background, the bitmap .> just disappears completely when masking it. I tryied many combinations, .> white text black background, black text white background, with gradients et .> cetera.. nothing working .. :( .> .> Lucio .> .> .> .Draw a black rectangle the same size as the bitmap. .> .Put your text on top of this, in white. .> . .> .Group the black rectangle and the white text. .> . .> .Select the image and the group, then Object->Mask->Set .> . .> .This will give you the bitmap with the text "cut out" from it. .> . .> .(You will have to release the mask to be able to edit the text in the .> .group). .> . .> .-Rob A> .> . .> .On Sat, Jun 21, 2008 at 9:05 AM, loscotec@...2544...: .> . .> .> Hello everybody! .> .> .> .> Does anybody know how to use text as object-mask? .> .> .> .> I need to cut a text in a picture so that the text would actually be .> .> transparent! .> .> .> .> The goal is easily achieved converting text in path, and grouping it with .> a .> .> background, and then using it as a mask for the picture. But in this way .> I'm .> .> loosing the chance to change what is written in a second moment. .> .> .> .> Reading some references, I saw that text objects should work as any other .> .> objects about masking, but they they don't. .> .> .> .> What am I missing? .> .> .> .> Lucio .> . .> .> .. Caminante no hay .> camino, solo se hace .> camino al andar .. .> .> .> --- o .> meglio --- .> .> .. Caminante el .> destino no es al .> final de el viaje, .> pero en todo el .> andar .. .> .> .> ------------------------------------------------------------------------- .> Check out the new SourceForge.net Marketplace. .> It's the best place to buy or sell services for .> just about anything Open Source. .> http://sourceforge.net/services/buy/index.php .> _______________________________________________ .> Inkscape-user mailing list .> Inkscape-user(a)lists.sourceforge.net .> https://lists.sourceforge.net/lists/listinfo/inkscape-user .> . .------------------------------------------------------------------------- .Check out the new SourceForge.net Marketplace. .It's the best place to buy or sell services for .just about anything Open Source. .http://sourceforge.net/services/buy/index.php ._______________________________________________ .Inkscape-user mailing list .Inkscape-user(a)lists.sourceforge.net .https://lists.sourceforge.net/lists/listinfo/inkscape-user . .. Caminante no hay camino, solo se hace camino al andar .. --- o meglio --- .. Caminante el destino no es al final de el viaje, pero en todo el andar ..

3 2

Re: [Inkscape-user] Transparent text or text mask.
by loscotec＠libero.it 23 Jun '08

23 Jun '08

Thanks Rob, but.. did you try it? Is it working for you? It doesn't for me. Neither in home computer, nor in the one I have got where I work.. As far as i use some text, grouped or not with some background, the bitmap just disappears completely when masking it. I tryied many combinations, white text black background, black text white background, with gradients et cetera.. nothing working .. :( Lucio .Draw a black rectangle the same size as the bitmap. .Put your text on top of this, in white. . .Group the black rectangle and the white text. . .Select the image and the group, then Object->Mask->Set . .This will give you the bitmap with the text "cut out" from it. . .(You will have to release the mask to be able to edit the text in the .group). . .-Rob A> . .On Sat, Jun 21, 2008 at 9:05 AM, loscotec@...2544...: . .> Hello everybody! .> .> Does anybody know how to use text as object-mask? .> .> I need to cut a text in a picture so that the text would actually be .> transparent! .> .> The goal is easily achieved converting text in path, and grouping it with a .> background, and then using it as a mask for the picture. But in this way I'm .> loosing the chance to change what is written in a second moment. .> .> Reading some references, I saw that text objects should work as any other .> objects about masking, but they they don't. .> .> What am I missing? .> .> Lucio . .. Caminante no hay camino, solo se hace camino al andar .. --- o meglio --- .. Caminante el destino no es al final de el viaje, pero en todo el andar ..

2 1

Move guides and object to the page
by heathenx 22 Jun '08

22 Jun '08

I have drawn something off to the side of my page and I have guides on top of it. I would like to move my object along with the guides to the center of my page. Is it possible to move to guides and the object together? heathenx

1 0