- Inkscape Users - Inkscape Mailman

Inkscape Intro video assistance needed
by Ian Caldwell 05 Jan '11

05 Jan '11

I'm forwarding on an email on behalf of myself and Courtenay, We're attempting to create an intro video for the inkscape website located at http://djink.chrismorgan.info/about/ The following listed below is a sample of the video http://inkscape.org/~inc/mockup-intro-vid-started.mov If you're willing to assist with one of the parts please either A. reply to this email or B. add your name to the list here... https://docs.google.com/document/pub?id=1QDTbDv7SGZIyrBUvSoraC_587ROY49l-bV… Thanks, Ian Caldwell ---------- Forwarded message ---------- From: Hinerangi Courtenay I've updated the movie file with some sample shots ( http://inkscape.org/~inc/mockup-intro-vid-started.mov) - it gives a slightly clearer idea of the atmosphere I'm trying to create. Here is a list of shots still needed: • 5 second shot of Inkscape with docked dialogs open and a nice illustration being worked on • 3 second shot of Inkscape being used on Windows (XP/Vista/7) - full-screen recording with taskbars visible • 3.5 second shot of Inkscape being used on any Linux distro - full-screen with taskbars visible • 3-5 seconds each of 2-3 people using Inkscape for different purposes (eg. diagrams, artwork, logos, etc.) - to illustrate pro users & hobbyists • 10 second time-lapse/fast-motion of someone making art • 3 second close-up of pen tool or caligraphy tool in use • 4 seconds of something representing community - any suggestions? Ideally there would be different people for most of these - at worst we could get away with maybe 4? If anyone has any better ideas for shots already included, they're more than welcome to make suggestions. I think it would be useful to have an official Inkscape channel - then any videos created for the website could go there (promos, interviews, tutorials, etc). Youtube has a huge audience, and could draw more traffic to the Inkscape website.

1 0

Doublesided Print Alignment
by NoOp 04 Jan '11

04 Jan '11

I have two inkscape drawings, each have two 360 degree protractor wheels on them; exact same size. I am attempting to print drawing 1, turn the paper (it's doublesided photo paper) and then print drawing 2, and get the prints to align properly. Purpose is so that I do not have to print singlesided, paste the wheels together & then laminate. The project calls for printing all 4 wheels (2 ea from each inkscape drawing) back-to-back so that only two wheels are necessary for laminating. I have tried moving the wheels individually (on drawing 1 only so that drawing 2 is the base) by x & y pixels, but so far haven't found the proper combination to get them to align exactly with the backside of drawing 2. I'm running out of ink & paper with each attempt. Drawing 1: wheel 1 x 120 y 560 px wheel 2 x 250 y 150 px Drawing 2: wheel 1 x 240 y 570 px wheel 2 x 140 y 130 Note the above are just samples and are not the closest alignment(s) when printed. That is just what I have on the currently opened drawings at this time. I can of course move each drawings wheels individually to position. But in order to test I need to print each on each side in color. So, I wonder if there is some magical x/y number/method I can use instead of trial & error (mostly error). Printed paper is US Letter (8.5x11"). Inkscape 0.48 (linux: Ubuntu 10.04 & 10.10) $ apt-cache policy inkscape inkscape: Installed: 0.48.0-1ubuntu1~lucid1 Candidate: 0.48.0-1ubuntu1~lucid1 Version table: *** 0.48.0-1ubuntu1~lucid1 0 100 /var/lib/dpkg/status 0.47.0-2ubuntu2 0 500 http://us.archive.ubuntu.com/ubuntu/ lucid/main Packages Any suggestions?

3 4

Memory sucked away... why?
by Fletcher Johnson 04 Jan '11

04 Jan '11

Hi all, I am a new user. When I run Inkscape on Windows Vista, it starts fast, then runs slower and slower. If I open task manager and look at processes, I can see the Memory (Private Working Set) - and as I watch it just keeps increasing. When I start Inkscape, it is using about 70 MB of ram. I load the picture I am editing and it jumps up to 80 MB - still ok. But as soon as I start editing the picture, the memory starts growing - often by 6 MB at a time, until it is using over 1 GB of ram. At that point, I have to exit Inkscape and then either restart the computer or wait about 10-15 min before it actually exists (at least according to task manager.) All the other programs I watch in task manager have the memory used grow and shrink as they perform various tasks. Only Inkscape keeps growing and by such a large value. And the higher the memory used, the longer it takes for things to happen. Even if I do the same thing (move a group of lines, etc.) Any idea of what setting I might change to fix this? Just Me

2 3

Re: [Inkscape-user] Inkscape/Synfig animation team-up example
by Matt Jordan 04 Jan '11

04 Jan '11

> > > For a contest entry, I used Inkscape in conjunction with > > Synfig to make a > > 30-second animated commercial (of sorts). > > Very nice actually, congratulations Thanks! And thanks to anybody who watched and voted ... I won the contest! Matt

2 1

Placement of Toolbars
by Shawn H Corey 31 Dec '10

31 Dec '10

Is there anyway to change the placement of the toolbars? I would like them all to be on the left. Also, is there anyway to re-attach a toolbar? -- Just my 0.00000002 million dollars worth, Shawn Confusion is the first step of understanding. Programming is as much about organization and communication as it is about coding. The secret to great software: Fail early & often. Eliminate software piracy: use only FLOSS.

4 3

Inkscape/Synfig animation team-up example
by unknown＠example.com 31 Dec '10

31 Dec '10

> For a contest entry, I used Inkscape in conjunction with > Synfig to make a > 30-second animated commercial (of sorts). Very nice actually, congratulations

1 0

Wide carriage HP755CM install on Windows Vista
by Susan Spencer 31 Dec '10

31 Dec '10

I found an old HP 755CM 36" wide format designjet for $75 at our local Technology Recycling Center. HP officially doesn't have a driver for this designjet anymore. But the HP driver file - '*HP Designjet HP-GL/2 driver for Windows and AutoCAD 2000 - AutoCAD 2005'*-- *pl532en.exe - * for Windows Server 2000, Windows 2000, and Windows XP, will work for Vista and Windows 7. To set it up: Connect the printer to your ethernet network. If your internet router is set up as a DNS server, it will get an IP immediately. If you don't have DNS on your internal router, then you may need to download HP's Jetdirect control software to access it and assign it an IP address. Once an IP is assigned, execute the *pl532en.exe *file to a directory you make just for this driver. Run 'Add printer', select network printer, search for new printer, and the IP address of the new printer should show up. Cancel, then run 'Add printer' again but select *local* printer and use the IP address as the name, and the printer port will auto-create. When asked for the driver, browse to your directory so it can find the .inf file. The 755CM will be listed. I saw posts which stated that this file worked with Windows 7, and I read other posts that there's a 64bit version of this file which will work with 64bit versions of Windows Vista and Windows 7 as well. This designjet will print on clear film, coated bond, heavy coated bond, adhesive vinyl, and others. Will also print on 8.5" x 11" in landscape orientation. I'll let you know when I get it hooked up with Linux. - Susan

1 2

Bamboo Fun tablet for Ubuntu
by Susan Spencer 30 Dec '10

30 Dec '10

For those of you who want to install a Wacom Bamboo Fun tablet on Ubuntu, upgrade to Maverick. If you have a different Ubuntu version, and this workaround works, please post. l had web searched for info, found some advice, but nothing yielded results. Then checked the bug listings for Ubuntu. Ubuntu guru *Stefan Bader* determined that the current simple workaround is to install input backport modules using the Ubuntu Software Centre. Select '*Backported input drivers for generic kernel image'* --> name of the file is “*linux-backports-modules-input-maverick-generic*“. Install, then reboot. Wacom’s *MyPaint* (also installed through the Ubuntu Software Centre) listed devices as ‘disabled, screen, window’,which is a bit confusing but I made no changes. The tablet worked perfectly. *Gimp 2.6* Edit/Preferences/InputDevices/ConfigureExtendedInputDevices listed The Wacom Bamboo Finger Pad, Finger Touch, Pen eraser, Pen stylusd but they were marked as disabled. Again I made no changes, and the tablet worked perfectly. Last test – opened* Inkscape 0.48*, selected ‘Draw Free Hand Lines’ – tablet worked fine. - Susan

1 0

Re: [Inkscape-user] Template Editor
by unkown UN 30 Dec '10

30 Dec '10

Actually there as a guy named Thomas that emailed me a link to this extension: http://wiki.colivre.net/Aurium/InkscapeGenerator I haven't tried it yet, but CSV datasource is extrememly workable. Thanks! BTW: For use case info... I design my resume in Inkscape. -Steven

1 0

Inkscape/Synfig animation team-up example
by Matt Jordan 30 Dec '10

30 Dec '10

Hi folks! For a contest entry, I used Inkscape in conjunction with Synfig to make a 30-second animated commercial (of sorts). I did it in two days, just before the deadline, so it isn't exactly perfect, but it turned out reasonably okay. Synfig imports svg files pretty well now, so I was able to create all of my elements in Inkscape (and thus take advantage of its really nice drawing and painting abilities), then take them into Synfig for rapid (though in this case limited) animation. Here's the finished product: http://www.youtube.com/watch?v=UY4rx7CzaDY (If you'd like to help me win the contest, please feel free to hit the "Like" button. :D ) I used Audacity for the sound recording and Blender's Video Sequence Editor to edit everything together. Plus, it was all done on Ubuntu, so it was a complete open source project. If there are any coders on the list who are just dying for more stuff to do (it could happen!), Synfig could really use some help as it doesn't yet have anything close to the user base that Inkscape enjoys. I hope, though, that this little contest entry shows the potential that Synfig has and, especially, what a great combo Synfig and Inkscape can be. Cheers! Matt Jordan

1 0