- Inkscape Users - Inkscape Mailman

filter parameters?
by Mike McNally 15 Sep '09

15 Sep '09

(using 0.47 nightly from a couple days ago, Ubuntu Linux) How does one affect parameters for one of the pre-defined filters in the "Filter" pull-down menu? The Inkscape "Help" chapter about Filters bears little resemblance to the actual application; at least, it's certainly hard for me to tell what it's talking about when I look at what the application actually shows me. When I try to use any of the filters, I get a brief, blank pop-up dialog that shortly disappears, and then the filter takes effect with some canned parameters. I have to assume that the filters are actually configurable, but for the life of me I can't see how one does the configuration. -- Turtle, turtle, on the ground, Pink and shiny, turn around.

3 4

Inkscape nightlies PPA
by Ted Gould 14 Sep '09

14 Sep '09

Hello, I set up this repository a while ago, but it broke, and now I think I have it all running again. I'm still running the builds manually so they're not quite "nightlies" but it's been running reliably, so I'm almost ready to move it to an automated script. This is a PPA that contains frequent builds of Inkscape directly from the trunk branch. It creates a separate package called "inkscape-devel" that you can install while you have stable version of Inkscape installed as well. Hardy is still a bit broken, so this is for people on Ubuntu releases 8.10 or newer. https://launchpad.net/~inkscape-nightly/+archive/ppa/ Currently, this will have pre2 plus other patches and translations that have been put in trunk since it's release. --Ted

1 0

Re: [Inkscape-user] Eraser tool
by Jozef Legény 13 Sep '09

13 Sep '09

On Friday 11 September 2009 22:58:58 Antonio Roberts wrote: > I just loaded up Inkscape 0.47pre2 on Ubuntu Jaunty 9.04 and the first > time that I used the eraser tool on a rectangle there was small red > path. The second time it wasn't there. > After some tests I have found some interesting behaviour patterns with the eraser tool. As for the trailing red line, it seems that just clicking (not dragging) anywhere on the canvas (with the eraser tool selected) sets it off, until either another tool is selected or Esc is pressed or a dragging with eraser begins. One more thing is that the eraser is actually able to erase along a non-continuous path. To do this drag an eraser stroke, then (while still holding the left mouse button) press the right mouse button (which will open the menu) then click somewhere on the canvas. The thick eraser stroke will stay on screen and a thin red line will appear behind the cursor. Now if you start dragging again you can add another eraser stroke. The process is repeatable. I wonder if this is the intended behaviour of the eraser tool or not. In any case it might get handy. (also note that this is pretty much the same way the caligraphic tool behaves) Jozef

1 0

Eraser tool
by Stuart Edwards 11 Sep '09

11 Sep '09

Hi -- Just checking out some of the new features in 0.47 and tried the new eraser tool with mixed success. Release notes say that there are two modes of operation: vector and 'bitmap', but no instructions on how to trigger one or the other. Tool seems to create a path which if placed on an object will sometimes erase it completely. No luck on getting it to partially erase an object (line, rectangle etc). 'Select' 'Delete' seems to deal with whole vector objects more efficiently, although the partial erase could be handy. Stu MacPro OSX 10.6 XQuartz 2.3.4 0.47pre2

6 8

for MacOS
by Stuart Edwards 09 Sep '09

09 Sep '09

Hi While checking out 0.47pre2 I jotted down keyboard shortcuts I found that might be helpful for Mac users who don't get the full keyboard functionality of the Inkscape GUI. Stu

1 0

Selected objects sometimes don't respond to arrow keys
by Mike McNally 09 Sep '09

09 Sep '09

I'm using an 0.47 nightly from 06 Sep on Ubuntu Jaunty Linux. I've been using Inkscape (0.46) for about 8 months now for a variety of random web graphics. I'm not an art professional by any means. Anyway: in the nightly, while it's fixed some chronic crashes from 0.46, has itself a couple of quirks. One that is particularly annoying is this: I select some objects/paths, and then do something - maybe set clipping, or group, or change color; it's not completely consistent or at least it seems that way. After an operation like that, my stuff apparently remains selected (according to the UI), but subsequent attempts to use the arrow keys to move the elements around have no effect. I have to de-select and reselect the elements and then of course the arrow keys move them around just fine. I'm wondering if this may have something to do with layers, or something else about the application with which I'm not very familiar. One reliable way to make the effect happen is this: draw a rectangle, type "s" to switch to the "select" tool, and then go to the "fill & stroke* box and set "blur" to something bigger than zero. After that, the rectangle will be blurry and apparently selected, but the arrow keys won't do anything (for me anyway). -- Turtle, turtle, on the ground, Pink and shiny, turn around.

4 12

Re: [Inkscape-user] [Inkscape-devel] Inkscape 0.47pre2
by Michael Wybrow 08 Sep '09

08 Sep '09

On 31/08/2009, at 6:11 PM, Alexandre Prokoudine wrote: > > Is anyone doing a Mac/native GTK+ build for pre2? > > Sorry for pushing, but it's a week since pre2 was released and all we > have is sources :( I'm working on a universal package that will run on Leopard and Snow Leopard. I don't think it is worth creating another gtk-native-mac build, unless anyone wants to start actively working on the things I mentioned about the one I made for pre0 -- the gtk-native-mac version is going to require a fair amount of attention before it can become the main supported one over the x11-based version. Work on the universal x11-based package for Mac is a little slow... partly because I am quite busy with work, and partly because of the added complication of testing an additional version of the operating system (Snow Leopard 10.6). Anyway, Mac builds are coming and haven't been forgotten. If anyone else with mac packaging experience wants to contribute to the effort, it would be useful to look at some of the outstanding issues I haven't got to yet, like the dictionary bundling or the DBUS bundling/startup (might be similar to what GIMP has). If so, let me know. Cheers, Michael

5 10

Easiest Linux Distro for inkscape 46
by John Culleton 07 Sep '09

07 Sep '09

Since my Slackware system appears inhospitable for Inkscape despite my best efforts I want to put up another distro on its own partition just for Inkscape. My immediate target is Inkscape 46 since anything newer will probably not be easily installed. All other factors considered equal I prefer an rpm based distro. What does the list recommend? -- John Culleton "Create Book Covers with Scribus" http://www.booklocker.com/books/4055.html

6 7

Compiling 46
by John Culleton 03 Sep '09

03 Sep '09

When I try to compile Inkscape 46 I run into the usual lib problems. I downloaded the latest versions per the urls on the Inkscape install page but that doesn't work. I downloaded earlier versions and ran ldconfig but that didn't help. For the following products which exact versions do I need? I was successful in loading libsigc++-2.2.3. The rest don't work: gdkmm-2.4 glibmm-2.4 gtkmm-2.4 I use Slackware 13 which was just released. I installed the Boehm thingamabob (Bone Collector?). -- John Culleton

3 5

Inkscape 0.47pre2
by Ted Gould 02 Sep '09

02 Sep '09

Hello! After too much delay, some for good and some for stupid reasons I've finally uploaded a pre2 source package for Inkscape. This is VERY close to the final 0.47 release so it's important that people pay attention and we don't let things fall through the cracks. https://sourceforge.net/projects/inkscape/files/inkscape/0.47pre2 There should be packages available shortly, packagers please reply to this message with information regarding those. Please discuss any release critical bugs or other information regarding the release on the inkscape-devel mailing list. === MD5 Sums === de351d81cca9f99b3a1fb4faa36c723d inkscape-0.47pre2.tar.bz2 77c6ea1245618af69381067c90e57afc inkscape-0.47pre2.tar.bz2.asc ccced173f66611591006d16ea6a200b4 inkscape-0.47pre2.tar.gz 3df60bde0ca2ef28db283c285d5511b1 inkscape-0.47pre2.tar.gz.asc cb94fa821bff40970260f9530cc0bd84 inkscape-0.47pre2.zip 710c523dfdcf10ad39753788baefba90 inkscape-0.47pre2.zip.asc --Ted

5 6

Copy/Paste to Inkscape under Mac Leopard
by Luc Buker 30 Aug '09

30 Aug '09

Hello, For school i had to change from Windows to Mac. One of the problems I run unto is that i can't copy paste for example text from a word document (cmd+v) to Inkscape (ctrl+v, X11 based). Can someone give me some advice. If you're Dutch, you can answer in our mother tongue :D. Thank you. -- Luc Buker www.Lucreative.eu Bloemendaal

4 9

work with inkscape 0.46+devel photorealistc
by Valessio Brito 28 Aug '09

28 Aug '09

see: http://maddrum.deviantart.com/art/Megan-Inkscape-134931482 very, very real.. see shots in flickr: http://www.flickr.com/photos/maddrum/ :P

5 4

[SPAM] Libre Graphics Meeting 2010 in Brussels Announced
by Jon Phillips 22 Aug '09

22 Aug '09

GLOBAL - August 22, 2009 - Cutting edge graphics software meets free culture at Libre Graphics Meeting 2010 in Brussels Users and developers of Free, Libre and Open Source graphics software will meet in Brussels, Belgium on May 26-29, 2010 at the fifth annual Libre Graphics Meeting (LGM). Held in a historical piano factory, newly renovated into a lively exhibition and work space near Brussels' city center, LGM 2010 offers software developers, artists, designers and other graphics professionals the chance to collaborate and learn from each other. LGM emphasizes the sharing of collective creativity, innovation and ideas and is free for everyone to attend. The LGM community is excited for the opportunity to bring this event to the European capital. About the Libre Graphics Meeting The Libre Graphics Meeting exists to unite and accelerate the efforts behind Free, Libre and Open Source creative software. Since 2006, this annual meeting is the premiere conference for developers, users and supporters of projects such as GIMP, Inkscape, Blender, Krita, Scribus, Hugin, the Open Clipart Library, and the Open Font Library gather to work on interoperability, shared standards, and new ideas. Work at prior LGMs has pushed the state of the art in important areas such as color management, cross-application sharing of assets, and common formats. Face-to-face meetings and opportunities for collaboration are important to users and developers alike; in the form of tutorials, talks, workshops, and birds-of-a-feather (BOF) the event offers many formal and informal opportunities to interact. Highlights from LGM 2009 The last Libre Graphics Meeting took place in Montreal, Canada. It involved 150+ participants from around the world working together for four days to give presentations, demos, and meet informally. Through support from the Ãcole Polytechnique MontrÃ©al, the LGM user community (raising money on pledgie.com), Sourceforge, River Valley Technologies, Intel Communities, Open Candy, QT, sK1, GIMP, Python Software Foundation, Gnome foundation and Group Eyrolles, the conference funded travel for many international developers whom otherwise would not be able to work face to face. Highlights included contributions by companies building on Open Source such as AscenderCorp and Open Source Publishing, and presentations of Jeff Fortinâs PiTiVi Video Editor, FontMatrix, Phatch and Michael Terryâs work on In-Gimp user-experience analysis and kinetic templates. All major projects in attendance, Scribus, Gimp, Inkscape, and Open Font Library, spent time planning activities for the next year. New projects like the panorama stitcher NONA, Lighttwist, a system for running multi-projector immersive video displays, and Markus Weiland's FacetZoom widget, set the stage for new exciting software developments leading into LGM 2010 in Brussels. A Preview of LGM 2010 For Libre Graphics Meeting 2010, the conference promoters challenge all participating projects and people to set goals and plan creative projects. First, each major project is requested to have set three solid priorities before the conference to work towards. Second, one or more collaborative projects is to be developed, beyond just the tools used, such as a book or animation. And third, the conference hopes to involve an increasing number of artists and academics to show novel uses libre graphics software, and to discuss, analyse and provide inspiration. In the coming months, Libre Graphics Meeting 2010 organizers will release more information about the upcoming conference, raising funds to enable the event, and release the official call for participation for 2010. Immediately, the conference organizers invite all interested in participating to watch the http://libregraphicsmeeting.org website and join the Create Project (http://create.freedesktop.org) mailing list and get involved. LGM 2010 is hosted by the Libre Graphics Community and Constant in collaboration with De Pianofabriek, Master Networked Media and Research programme Communication in a Digital Age (Piet Zwart Institute, Willem de Kooning Academy, Rotterdam) and the Bruxelles Linux User Group (BXLUG). For more information, visit http://www.libregraphicsmeeting.org Press Contact * Sponsoring Organization: Create Project and Libre Graphics Meeting * Contact: Jon Phillips * Contact email: jon@...87... * Phone (USA): +1.415.830.3884 * Website: http://libregraphicsmeeting.org/ * Press Release in other languages: http://ur1.ca/a33b * Press Photos: http://ur1.ca/a34y ###

1 0

[Fwd: Re: Font not showing up in Inkscape 0.47pre1, built Jul 3 2009]
by Bibi Morris 11 Aug '09

11 Aug '09

That is the problem it is installed, I can use it in other programs, but not in inkscape, it is in .ttf format, but I do not know what it is about one .ttf showing in the font list and another .ttf not showing up in that list. Bibi

1 0

Font not showing up in Inkscape 0.47pre1, built Jul 3 2009
by Bibi Morris 10 Aug '09

10 Aug '09

I thought all the ttf fonts not showing up was cleared up in an earlier version. I was trying to use this font in the build Inkscape 0.47pre1, built Jul 3 2009, and it will not show up. Can any one shed light on what may be happening? It also does not show up in Inkscape 0.46, built Apr 1 2008 Those of use with personal die cutting machines are really lost when we cannot use the perfect font! I know it is silly but with over 17,000 fonts, we really find the perfect one and really want to use it. Thanks Bibi

4 4

Red Spiral Challenge
by Aaron Elmquist 04 Aug '09

04 Aug '09

Does anyone know how to creat the red spiral with the continuous gradient in Tavmjong Bah's "A Guide to Inkscape" I took a couple cracks at it last night without much sucess. ~Aaron

6 6

Concentric Circles?
by Jim Ford 04 Aug '09

04 Aug '09

Hi. I want to draw a series of concentric circles, of precise diameters. If I draw a circle about a centre and then resize it, the centre shifts. How do I keep the centre fixed, please? Jim

5 5

Release of JessyInk 1.3.0!
by Hannes Hochreiner 02 Aug '09

02 Aug '09

The JessyInk team is proud to announce the release of JessyInk version 1.3.0. This release features very exciting contributions from Marc Eberhard, who implemented a drawing mode allowing users to draw on the slides during the presentation in the browser. Another interesting new feature is the ability to assign "views." This feature can be used to zoom-in on a particular region of the slide. "Views" provide exciting new ways to enhance your presentations. Also new in this release is the option to customise the key bindings. To further improve the compatibility and usability of JessyInk, custom keys can now be assigned to all actions. For maximum flexibility, each mode (slide, index, drawing) has its own set of key bindings. Be sure to check out the latest JessyInk release and the showcase file at: http://code.google.com/p/jessyink/ About JessyInk: JessyInk is a JavaScript that can be incorporated into an Inkscape SVG image to turn it into an animated presentation. When the image is loaded into an SVG-capable browser, every layer of the image becomes a slide. Some of the many features include transitions, effects, an optional master slide, index sheet and drawing mode, and zoom-based effects.

1 0

snapping of guides + node editing questions
by adam ambrus 01 Aug '09

01 Aug '09

hello, one of my great latest discoveries in inkscape is the Snapping tool (or settings). however, i have a question about snapping a guide to an object/object's node - is it possible? according to the settings (Ctrl+Shift+D -> Snap) it looks like it is, but whenever i drag a guide from the ruler part of the screen, no snapping happens. what am i doing wrong? or is it a bug? also, my second point of interest is the node editing. one of the features i miss the most is the shortening of distance of two randomly selected nodes. in case you know Blender, after selecting vertices and pressing S to scale, their distance shortens/lengthens according to mouse movement. is there in inkscape any way of performing similar actions? thanks for any answer, -Adam

3 4

Ruben Quinones Ruiz está ausente de la oficina.
by unknown＠example.com 01 Aug '09

01 Aug '09

Estaré ausente de la oficina desde el Vie 31/07/2009 y no volveré hasta el Lun 24/08/2009 . Buenos días, Me encuentro disfrutando de vacaciones hasta el 24 de Agosto de 2009, si por cualquier motivo necesita atención de la Gerencia de Gestión de Red de ADIF Telecomunicaciones y Energía, puede contactar con los siguientes compañeros: * Red Alta Velocidad: eutrilla@...2632... * Red Dedicada: jomagarcia@...2632... * Red Troncal: ammartinez@...2632... * Energía y Parques de Telecomunicaciones: jlsimon@...2632... Para cualquier cosa urgente puede contactar con el Gerente de Gestión de Red: amvaquero@...2632... Un saludo

1 0

Re: [Inkscape-user] "phantom" objects in .svg files
by Elwin Estle 27 Jul '09

27 Jul '09

There are a couple of .svg "renderers" for blender (and I think they were probably the scripts you are talking about). I have only played with one of them very briefly. Seemed to work okay, but I can't remember what it was called, and I seem to remember it being kinda buggy, it was probably a year ago that I tried this. Other than that, I can't help you much. But yes, what little I did do was interesting. Blender also had, or used to have, a feature that would export a UV map as an .svg file. One thing that I have found interesting to do is to make some text (or whatever) in Inkscape, import it into Blender, and then apply a lattice modifier to it. You can deform text into some interesting shapes (and it works better than the Inkscape node sculpting thing), then render a .png file in Blender and then import that back into Inkscape and run trace bitmap on it. Blender does have it's own built in text capability, but I find it a lot easer to work with text in Inkscape, then import it into Blender for "3D-ifying". Another neat trick is to make a sort of "sheet" with text cut out of it, then import that into Blender, so you have a large surface with a text shaped hole in the middle. You can then animate a light shining through that hole using the halo feature available with Blender's lighting options. This creates a really cool backlit text effect. I have also just started to experiment with using Blender's "hooks" feature to animate imported Inkscape .svg files. There are a lot of interesting possibilities there. --- On Mon, 7/27/09, Maarten van der Velde <Maarten.van-der-Velde@...2657....> wrote: > From: Maarten van der Velde <Maarten.van-der-Velde@...2171...> > Subject: Re: [Inkscape-user] "phantom" objects in .svg files > To: "Inkscape User Community" <inkscape-user(a)lists.sourceforge.net> > Date: Monday, July 27, 2009, 2:40 AM > Can I ask you a "counter"-question? > Do you have experience with EXPORTING > from Blender into Inkscape? There seem to be a couple of > scripts out there > that seem to do this, apart from that they don't...? > Blender & Inkscape > could be a realy interesting combination. One could create > a 3d-wireframe in > Blender, find a nice perspective and then fill it in in > Inkscape, hence > retrieving a vector-drawing from it. > > > On 7/25/09 11:16 PM, "Elwin Estle" <chrysalis_reborn@...12...> > wrote: > > > > > I am just curious: When you delete an object > from your .svg file, does it > > actually get rid of the associated XML, or just not > display it any more? > > > > I do a lot of stuff in Inkscape and then import the > .svg into Blender for > > extrusion, etc. I find that sometimes I get > "extra" objects in Blender when I > > do this, i.e., the object that was deleted. > > > > ...and I am just wondering where these objects come > from... > > > > > > > > > > > ------------------------------------------------------------------------------ > > _______________________________________________ > > Inkscape-user mailing list > > Inkscape-user(a)lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/inkscape-user > > > > ________________________________________________________________ > Maarten van der Velde > graphic designer > > Powel ASA Klæbuveien 194, NO-7037 Trondheim, NORWAY > Phone: +47 73 80 45 00 - Fax: +47 73 80 45 01 > Direct line: +47 73 80 46 21 - Mobile: +47 48 16 46 > 21 / +31 (0) 6 30 80 > 95 91 > Email: Maarten.van-der-Velde@...2171... > http://www.powel.com/ > > > > ********************************************************************** > This email and any files transmitted with it are > confidential and > intended solely for the use of the individual or entity to > whom they > are addressed. If you have received this email in error > please notify > the system manager. > > This footnote also confirms that this email message has > been swept by > MIMEsweeper for the presence of computer viruses. > > www.powel.no > ********************************************************************** > > > ------------------------------------------------------------------------------ > _______________________________________________ > Inkscape-user mailing list > Inkscape-user(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/inkscape-user >

1 0

"phantom" objects in .svg files
by Elwin Estle 27 Jul '09

27 Jul '09

I am just curious: When you delete an object from your .svg file, does it actually get rid of the associated XML, or just not display it any more? I do a lot of stuff in Inkscape and then import the .svg into Blender for extrusion, etc. I find that sometimes I get "extra" objects in Blender when I do this, i.e., the object that was deleted. ...and I am just wondering where these objects come from...

3 2

Re: [Inkscape-user] "phantom" objects in .svg files
by Elwin Estle 27 Jul '09

27 Jul '09

Thanks for the info! I will try that. --- On Sun, 7/26/09, Donn <donn.ingle@...155...> wrote: > From: Donn <donn.ingle@...155...> > Subject: Re: [Inkscape-user] "phantom" objects in .svg files > To: inkscape-user(a)lists.sourceforge.net > Date: Sunday, July 26, 2009, 3:32 AM > On Saturday, 25 July 2009 23:16:15 > Elwin Estle wrote: > > I am just curious: When you delete an object > from your .svg file, does it > > actually get rid of the associated XML, or just not > display it any more? > There is a button to open the XML editor/viewer. > Edit->XML Editor (A little > window icon with <> in it) > It's worth watching what happens there as you select and > edit (and delete) in > the design window. You can also edit the SVG from that > window. > > > ...and I am just wondering where these objects come > from... > You can 'vacuum' the defs File->Vacuum Defs, this cleans > a lot of gumpf (a > technical term that I cannot explain without killing you > first ;) ) out of the > XML file. > > hth, > \d > -- > home: http://otherwise.relics.co.za/ > 2D vector animation : https://savannah.nongnu.org/projects/things/ > Font manager : https://savannah.nongnu.org/projects/fontypython/ > > > ------------------------------------------------------------------------------ > _______________________________________________ > Inkscape-user mailing list > Inkscape-user(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/inkscape-user >

1 0

text-decoration and overline-position / overline-thickness
by Beims Bob-RWBC70 24 Jul '09

24 Jul '09

Folks; SVG 1.1 provides the @overline-position and @overline-thickness attributes (http://www.w3.org/TR/SVG/fonts.html#FontDescriptions) and @text-decoration="overline" (http://www.w3.org/TR/SVG/text.html#TextDecorationProperties). I can't figure out how to apply such text decorations (in particular, overline) to text in Inkscape, and I'm finding that some rendering engines don't know how to display them. As a test, if one takes opens the file @ http://www.w3.org/TR/SVG11/images/text/textdecoration01.svg in Firefox 3.5, the text decorations aren't applied. They are rendered in Safari 4 and Chrome 2. So what's the *real* status of text decorations in SVG? Thanks in advance for your help, Bob

3 2

(no subject)
by Daniel Drijard 23 Jul '09

23 Jul '09

Hello, I do not know if this is the right place for my questions. I did not find a better possibility. Cordially Daniel -- Daniel Drijard | Telephone | 04 50 41 2089 (France) PH Department | Fax +41/22 767 9475 CERN | Mail <daniel.drijard@...2655...> CH - 1211 Geneva 23 |

7 14