- Inkscape Users - Inkscape Mailman

Re: [Inkscape-user] [Inkscape-devel] New LPE, New Video. Fillet/Chamfer
by Jabiertxo Arraiza Cenoz 14 May '14

14 May '14

Hi Nathan. I do a deeper look. ///////////////////////////////////////////////////////////////////// El mar, 13-05-2014 a las 03:40 +1000, Nathan Hurst escribió: 1) to my old astigmatic eyes the tangents do not look like they are > quite matched, are you sure you have the tangent code correct. This > is especially noticable when you are filleting a curve rather than a > line. ///////////////////////////////////////////////////////////////////// When I convert to paths a filleting the result curvature is a path of one segment, start and end nodes of this are tangent to front-back curves, and thsi sttart and end nodes are also handled as tangent for the inkscape UI. Maybe the problem is how far is the tangent handle from a node, but there isn`t a perfect way to determine, it depends from case. I use the nearest point to the tangent from a point placed at a half distance from the real knot filleting to the original cusp node. Here are some pics about how it works: http://sta.sh/28yrjqkdiw1 ////////////////////////////////////////////////////////////////////// 2) can you add fillets with smooth curvature variation (e.g. cornu > spiral, spiro, and I recall there being a 2geom toy that demonstrated > something like that). > /////////////////////////////////////////////////////////////////////// I see about it in power stroke code, I realy do the code but finaly removed, think isnt interesting in one curve path, because it increase the nuber of nodes of the resulting path because you need to pass the cubic values of the handles as points, because the incoming and outgoing curve need to be unchanged. This is my opinion but if anybody want to tell me about, i could change ;) Thanks Nathan for the feedback.

2 3

Re: [Inkscape-user] text in export to pdf randomly garbled
by Ronald Klop 13 May '14

13 May '14

Hello, I compiled Inkscape on FreeBSD and I can't reproduce my problem there. So it seems to be in some code which only runs on Windows. Any hints? Should I better post this on the inkscape-developers list? Regards, Ronald. On Mon, May 12, 2014 at 5:51 PM, M.H. van der velde <m.h.vandervelde@...155...> wrote: > Just an idea: could you export straight to DXF and then import the DXF into Inkscape? Haven’t tried it myself,… > > > On 12 May 2014, at 16:50, Ronald Klop <ronald.klop@...3075...> wrote: > >> Hello, >> >> I have a couple of technical drawings which I convert from >> Microstation (.dwg) format to SVG using some third party software and >> from SVG to PDF using Inkscape. >> >> The SVG contains the text on the drawing in correct form, but the PDF >> has text garbled. It is displayed ok, but the text selection for >> copy-pasting is corrupt. It is reproducable and the result is constant >> for every run. >> If I use the --export-latex option than the .tex file contains the >> text in correct form again. >> >> Is this a known issue? I cannot find it in the bug database. >> >> I'm running Inkscape 0.48.4 and also tried the latest development >> binaries from your site. I reproduced this on Windows Server 2008 R2 >> Enterprise and Windows 7 Professional. Both 64 bits. >> >> I can provide a sample drawing, but need to anonymize it first. >> >> Regards, >> Ronald. >> >> -- >> Ronald Klop >> >> ------------------------------------------------------------------------------ >> "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE >> Instantly run your Selenium tests across 300+ browser/OS combos. >> Get unparalleled scalability from the best Selenium testing platform available >> Simple to use. Nothing to install. Get started now for free." >> http://p.sf.net/sfu/SauceLabs >> _______________________________________________ >> Inkscape-user mailing list >> Inkscape-user(a)lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/inkscape-user > -- Ronald Klop

1 0

Re: [Inkscape-user] [Inkscape-devel] New LPE, New Video. Fillet/Chamfer
by Jabiertxo Arraiza Cenoz 12 May '14

12 May '14

Hi Nathan. > Fantastic work, Jabiertxo! Thanks very much > Something to think about: If you were writing the curve editing/handle > code from scratch, how would it work? Firts to the end: Not realy a code from scrach. it have a lot of code from Power Stroke, without this i couldent make this. Power Stroke store in a vector of Geom::Point the data of his knots, basicaly in the X coordente store the position in the line and in the Y coordinate store the distance from knot to original line in perpendicular. Also have acallback in node tool for handle updates on the original path. Whith this base i work the effect. The work in progres add new features to the original concept whith the feedback of suv, LiamW and ScislaC. I put the ended result: I need to store: Distance from Knot to path: Stored in the [Y] part. it determine how far is the knot to the path -configurable by LPE widgets- in poxels, from 0 in the same path, in away. this is because with some zoom knots hide nearly Nodes and need a way to move a bit. It reply your 3 question Hide or show knot: Knots only show in cusp nodes so [Y] negative values in symm nodes... make the knot invisible. Fillet or Chamfer: It also is handled by the [Y] part of the Geom::Point. The [Y] value can be an floor(double) or a floor(double)+0.0001. In case there is decimal part, the effect show as chamfer. If a knot radius is in mode flexible (green knot): Store in the X value of the pathvector (int)index_of_pathvector +(decimal)0.-1 point at this curve. the next curve radius is calculated by the phisical distande in previous. If a knot radius is fixed (red knot): It still store the value in X but is stored in pixels -whith unit conversions- and with a negative value for easy check. This knots are exactly the X value in pixels*-1 in both sides. > 1) to my old astigmatic eyes the tangents do not look like they are > quite matched, are you sure you have the tangent code correct. This > is especially noticable when you are filleting a curve rather than a > line. I look for more deeply. > 2) can you add fillets with smooth curvature variation (e.g. cornu > spiral, spiro, and I recall there being a 2geom toy that demonstrated > something like that). The same. > 3) I'm not exactly understanding the meaning of the green fillet > handle - the natural interpretation to me would be to have the green > diamond at the transition point from the original path to the fillet, > but yours seems to be offset somehow. Why? Replied. Thanks Nathan for the feedback. I send news soon whith the active points. Sorry for my english. Regards, Jabier.

1 0

text in export to pdf randomly garbled
by Ronald Klop 12 May '14

12 May '14

Hello, I have a couple of technical drawings which I convert from Microstation (.dwg) format to SVG using some third party software and from SVG to PDF using Inkscape. The SVG contains the text on the drawing in correct form, but the PDF has text garbled. It is displayed ok, but the text selection for copy-pasting is corrupt. It is reproducable and the result is constant for every run. If I use the --export-latex option than the .tex file contains the text in correct form again. Is this a known issue? I cannot find it in the bug database. I'm running Inkscape 0.48.4 and also tried the latest development binaries from your site. I reproduced this on Windows Server 2008 R2 Enterprise and Windows 7 Professional. Both 64 bits. I can provide a sample drawing, but need to anonymize it first. Regards, Ronald. -- Ronald Klop

1 0

New LPE, New Video. Fillet/Chamfer
by Jabiertxo Arraiza Cenoz 12 May '14

12 May '14

Hi to all. Here is a video showing my new LPE. The branch is here[1].The video here[2]. Thanks to Josh Andler for give me the idea Also thanks very much to suv for the feedback and time inverted on it. And a special thanks to Liam P. White, without his help the LPE need a lot of hours to be.. or not to be. Bye, Jabiertxo. [1] https://code.launchpad.net/~inktxof/inkscape/fillet-chamfer [2] https://www.youtube.com/watch?v=HdsxhXPksgo

1 0

putting youtube on an svg web page.
by john Culleton 09 May '14

09 May '14

I know I can create an svg web page via Inkscape. I can add url anchors to it. But can I by any mechanism put a Youtube video on it or do I have to use an html subpage and an url anchor to reach it? -- John Culleton Wexford Press Free list of books for self-publishers: http://wexfordpress.net/shortlist.html PDF e-book: "Create Book Covers with Scribus" available at http://www.booklocker.com/books/4055.html

3 2

Settings on windows 8 - multicore support.
by Martin Acevedo 04 May '14

04 May '14

Hi, I'm using a the tool for a few days and it looks great. I have noticed from time to time it gets a bit slow. I googled and found it is possible to add multi - core support, at least on linux. The thing is I'm running windows 8 and I don't know if this is possible. In addition, there is no "%userprofile%\Application Data\Inkscape" in my windows. Does anyone know where the settings are stored? I'm using 0.48 version of inkscape. Thanks, Martin

2 2

Roughen video
by Jabiertxo Arraiza Cenoz 28 Apr '14

28 Apr '14

Hi to all. Here is a video from my last work. Roughen LPE https://www.youtube.com/watch?v=130Dbt0juvY Soon Simplify LPE and Perspective-Envelope LPE videos. Hi, Jabier.

1 0

New Simplify video
by Jabiertxo Arraiza Cenoz 28 Apr '14

28 Apr '14

And now the video of Simplify LPE: https://www.youtube.com/watch?v=gaWujN_iTSk Regards.

1 0

New video Envelope and Perspective LPE
by Jabiertxo Arraiza Cenoz 28 Apr '14

28 Apr '14

And the last video, envelope or perspective by 4 points: https://www.youtube.com/watch?v=CjKGatyxTZ8 Regards

1 0