- Inkscape Users - Inkscape Mailman

Re: [Inkscape-user] inkscape -> indesign with transparency gradient
by Cedric Sagne 25 Aug '07

25 Aug '07

Hi David, I had a discussion a few months back re SVG features with Chris, who works on W3C SVG, on colour space and how these features are implemented in Inkscape. To make a long story short, it seems that CMYK colours are perfectly supported by SVG standards but that Inkscape only encodes colours as RGB. (apart from the fact that you can use a CMYK interface to input them) . Thus resulting in the following situation: Inkscape allows you to input CMYK values to pick a colour but saves the SVG file with RGB, although SVG does support CMYK colours. My advice is the following workaround : create your SVG, import it in Scribus, in Scribus, redefine your colours as CMYK and save as EPS (remove unused colours). Fortunately for logos you should have very few colours. It is a somewhat tedious workaround but the one I picked as it is reliable. Cedric > For this I need to provide the logo to be put into InDesign. > Basically that means: I need the blue to be a certain cmyk colour and > not rgb colour space and I need the transparency gradients in an eps, ai > or pdf. > Unfortunately I have no clue how to go about it. I couldn't even easily > redo it in illustrator. Maybe I'm blind but in the version I tried there > seemed to be no option for transparent gradients. The only way this > effect should work are transparency masks. I'll try CS3 in university > tomorrow, though. >

3 2

wish for inskscape
by Carlos \"Guâno\" Grohmann 24 Aug '07

24 Aug '07

Hi all don't know if this feature is planned or even already implemented in snv. There is one feature of CorelDraw I haven't see anywhere else. When you click an object and then you can transform it, change the width, for instance. If you hold CRTL while doing it, it will cause the object to be moved or scaled, in amounts equal to its size, so you can use it to mirror the object or to place a duplicate aligned to the original one, without the need of additional actions. the problem is that in Inkscape, if you drag the diagonal modifiers, you need to hold shift to make it changes proportionally, while this is the default action for Corel. So maybe it would need to hold two keys, or use some other key (like Alt).. don't know if I made myself clear, but it's a feature worth having. Carlos -- +-----------------------------------------------------------+ Carlos Henrique Grohmann - Guano Visiting Researcher at Kingston University London - UK Geologist M.Sc - Doctorate Student at IGc-USP - Brazil Linux User #89721 - carlos dot grohmann at gmail dot com +-----------------------------------------------------------+ _________________ "Good morning, doctors. I have taken the liberty of removing Windows 95 from my hard drive." --The winning entry in a "What were HAL's first words" contest judged by 2001: A SPACE ODYSSEY creator Arthur C. Clarke Can't stop the signal.

3 3

exporting slices as boxes
by Nahuel Defossé 24 Aug '07

24 Aug '07

Hi! I've made some graphics for web pages with inkscape, but I find hard to export certain areas. For example, I have a Box, a rounded corener one, that should be exported in three vertical slices, the middle one, will be repeated as a background latter. The point is I make a rectagle surrounding the area I want to export, then, I lower transparency to 0%, so the box won't be exported, but the drawing inside its area (this box has no stroke). Then when I want to select this "ghost" box, it's gone! If I select an area that contains the box, there it is, but, no simle way to select just _that_ box. Any suggestion? I think that maybe the search box may help, but I don't undesrtand how it works. Thanks in advance. Nahuel

8 25

Re: [Inkscape-user] Inkscape SVG extension / CMYK support
by Cedric Sagne 24 Aug '07

24 Aug '07

Wow... does that mean that at some point in the future a SVG file imported in Scribus will import a colour in the CMYK space? If so big thanks to all involved in this. Cedric > Good news is that once things are in, we've already coordinated work > with the Scribus guys. We will just need to wind up a few things on > the details of placement and then hand off to them.

1 0

Compiling on Win32
by Docsonic 24 Aug '07

24 Aug '07

Oops.... who woulda thought 'send' had a keyboard shortcut? Here is my complete question.... I followed the directions from JonY to compile the SVN on Win32 (I know I don't really need to as the new win builds are perfect but I enjoy the challenge) and I keep hitting the same problem. When I run 'g++ buildtool.cpp -o btool' I get a string of errors starting with - buildtool.cpp:53:18: error: string: No such file or directory buildtool.cpp:54:15: error: map: No such file or directory buildtool.cpp:55:15: error: set: No such file or directory buildtool.cpp:56:18: error: vector: No such file or directory followed by a lot more that seem to be related to these initial errors. I found the files in question in C:\mingw4\include\c++\4.2.0 but I have no idea how to make g++ see them. Any ideas what I am doing wrong? Thanks, Tony

1 0

Letterspacing Keycommands under Linux
by Joey Pender 24 Aug '07

24 Aug '07

I've spent a full day trying to figure out why the letter-spacing and line-height commands (Alt+<, Alt+>) are not working under Linux. I'm running OpenSuSE 10.2, with Inkscape 0.45.1, but no matter what I do, the only thing Alt+< does is put commas and periods in my text. I tried the text section Inkscape Advanced tutorial. Manual kerning shortcuts work (Alt+arrows), but letter-spacing (Alt+<, Alt+>) and line height (Control+Alt+<, Control+Alt+>) do not work, it only places commas or periods, as if the shortcut didn't exist. Outside of text edit mode, Alt+< and Alt+> perform a uniform scaling. I've already changed my GNOME Keybindings away from using ALT as a modifier (it was conflicting with Maya). I've checked the default.xml keys file and I don't see any mention of an action for letterspacing/line height, so it doesn't seem like I can change it. And I tested 0.45.1 under Windows and the commands work perfectly fine. I'm thinking it could be the build, but I doubt it - it was installed via the autopackage from the Inkscape website. I would gladly appreciate some help on this situation! Thank you!

7 10

broken perspective effect
by heathenx 24 Aug '07

24 Aug '07

I have just formatted my computer and reloaded opensuse 10.2. I have everything put back together and that includes Inkscape v0.45-1 (inkscape-0.45.1-2.guru.suse102.rpm). However, I have run into a brick wall with the perspective effect. It seems a long time ago I had a similar problem but I cannot for the life of me figure out what I did to fix it. Not even sure if it's the same error. I have attached a pic of the error that I am getting. I have python-numeric-24.2-36 and python-numpy-1.0.3.1-0.pm.1 installed. An 'rpm -q python' results with python-2.5-19.4 if that helps. Hmm... heathenx

1 0

When is the next version due?
by Phil Rhoades 23 Aug '07

23 Aug '07

People, I had trouble building the SVN version - when is the next version with PDF import due? Thanks, Phil. -- Philip Rhoades Pricom Pty Limited (ACN 003 252 275 ABN 91 003 252 275) GPO Box 3411 Sydney NSW 2001 Australia Fax: +61:(0)2-8221-9599 E-mail: phil@...2067...

8 15

svn needs files not installed by poppler
by unknown＠example.com 23 Aug '07

23 Aug '07

Hello! I start this as a new thread to avoid misunderstanding and to give it a better titel for others to find answers easier. It's basically what I posted in "[Inkscape-user] When is the next version due?". I have a linux from scratch. gtk 2.10.13, poppler-0.5.91. svn inkscape Revision: 15884. I do ./autogen.sh; configure; make. Configure is happy with my system and also with my poppler-0.5.91. poppler-0.5.91 has the header files that can't be found during inkscape make but these seem to be headers only for compilation of poppler or poppler at least does not install them. Telling inkscape configure about the sources of poppler helps but then the make gets stuck because some includes in the poppler-headers are local ones which then of course don't resove. I couldn't find any hint about some special poppler install in the docs but as it is brand new developpment docs are often behind. I just wonder if and then how someone made a complete make with poppler used with current svn so far? Regards, Lynx

2 2

a lot of stuff (pdf, guidelines, bitmaps..)
by Carlos \"Guâno\" Grohmann 23 Aug '07

23 Aug '07

> Hello all > just registered at the list Been using Inkscape for a while now, and I > like it, but there are some points I want to discuss: > > - PDF export: the file size (in Mb) of the PDFs I export from Inkscape. > Comparing with other draw soft (like Corel), those PDFs created by Inkscape > are _huge_. Why? > > - Bitmap import: I seems to me that bitmaps are imported as if they were > 72dpi, so if you have a 300dpi image, it comes very big. IMO, images should > be imported with the size defined by the resolution of the image. > > - Guidelines snap: if I don't want to snap, I just turn that off, but after > I moved an object or create nother guideline, snap is on again! Is this a > bug or a feature? If it is a feature, please remove. I don't want to keep > turning snap off every time. > > - General preferences: anyway I can set up my preferences (like units in mm, > page a4, etc) for _ever_? Every time I create a document I have to change > units from px to mm, etc. that's annoying. Same goes to Alignment. I'd like > to set up so alignment would _by default_ be about the last selected object. > (which is a much more useful IMO, people want to align two things, but > usually one of them is a reference, so default should be either last or > first selected, not "selection"). > > -I don't know about most of you people, but that little hand that replaces > the arrow cursor when some object can be moved.. I hate that hand :), I > would be much more happy with a plain arrow cursor all the time I'm using > the "selector" tool, like in most programs. > > - I _really miss_ shortcuts for alignment, like "b" for bottom , "t" for top > and so on. This makes life _much much_ easier (and faster). > > - This should be a little silly but, how can I change the shortcut for > display mode? what is Crtl+KP_5? > > Well, I guess that's it so far > Keep up the excellent work! > > cheers -- +-----------------------------------------------------------+ Carlos Henrique Grohmann - Guano Visiting Researcher at Kingston University London - UK Geologist M.Sc - Doctorate Student at IGc-USP - Brazil Linux User #89721 - carlos dot grohmann at gmail dot com +-----------------------------------------------------------+ _________________ "Good morning, doctors. I have taken the liberty of removing Windows 95 from my hard drive." --The winning entry in a "What were HAL's first words" contest judged by 2001: A SPACE ODYSSEY creator Arthur C. Clarke Can't stop the signal.

5 7