- Inkscape Users - Inkscape Mailman

EPS font problems
by David Soukal 29 Nov '05

29 Nov '05

Hello!! It's been some time since I asked for help here... Inkscape, that I use daily, has grown and improved tremendously since!! Thanks guys!! I have the following small problem: I am creating a lot of figures for my thesis in Inkscape. I generate my plots in Matlab and use Inkscape to fine tune the result and to add annotations. Since I am using PSFrag to get the final annotations in LaTeX, I am exporting my graphics into EPS format. My problem is that it seems as if the font information in my EPS has been incorrectly coded. Let me be more specific. I am using the font Verdana for my text. I would create, say, a vertical arrow and I want to have a text whose center is aligned with the arrow. I do that in Inkscape and everything looks as it should. However, in the exported EPS, the text is slightly off the center. The reason is that the font is different and hence the size of the text is different. The net result is that the annotation is slightly off in the final PDF file. First I thought that PSFrag's interpreter of PS format is broken: I thought it cannot find either the font description in the EPS or it cannot find the font itself (to get the dimension of the text). However, Scribus and Konqueror have the same problem: they lack the information about the font and use some default. The EPS file, however, does contain the font info. But in this compicated format /newlatin1font {findfont dup length dict copy dup /Encoding ISOLatin1Encoding put definefont} def /Verdana-ISOLatin1 /Verdana newlatin1font the references to this font look like /Verdana-ISOLatin1 findfont however, previous versions of Inkscape would create simply /Verdana findfont. Is there something I can do? Does this mean that Scribus & Konqueror do not respect the standard? There's workaround using PSFrag: I align the left side of the text with the arrow and then tell PSFrag to center the text in the final PDF. While this works OK, the problem is that the EPS does not really bear any information about the alignment itself.. so I suspect I'll forget when I look at the figure later :) THANK YOU for any insight! David

1 0

where is Print direct ? - unable to print
by Michal Žeravík 27 Nov '05

27 Nov '05

Hi all, anyone got print working in 0.43? It was working only with Print Direct to | lp before for me. When I Print now, only 10% of graphics will be printed and format is moved out of paper. Confusing... michal gnome2.12@...1328... with cups >From MAILER-DAEMON Sun Nov 27 05:41:03 2005 Message-Id: <4iip86$emm0a3@...1330...> Date: 27 Nov 2005 05:40:53 -0800 To: inkscape-user(a)lists.sourceforge.net From: "Mail Delivery System" <MAILER-DAEMON@...1331...> MIME-Version: 1.0 Content-Type: multipart/report; report-type=delivery-status; boundary="TQm50.41emYem2D.Mb/qg.7vKqx5+" X-Spam-Score: 0.0 (/) X-Spam-Report: Spam Filtering performed by sourceforge.net. See http://spamassassin.org/tag/ for more details. Report problems to http://sf.net/tracker/?func=add&group_id=1&atid=200001 Subject: [Inkscape-user] Delivery Status Notification (Failure) Sender: inkscape-user-admin(a)lists.sourceforge.net Errors-To: inkscape-user-admin(a)lists.sourceforge.net X-BeenThere: inkscape-user(a)lists.sourceforge.net X-Mailman-Version: 2.0.9-sf.net Precedence: bulk Reply-To: inkscape-user(a)lists.sourceforge.net List-Unsubscribe: <https://lists.sourceforge.net/lists/listinfo/inkscape-user>, <mailto:inkscape-user-request@lists.sourceforge.net?subject=unsubscribe> List-Id: Inkscape User Community <inkscape-user.lists.sourceforge.net> List-Post: <mailto:inkscape-user@lists.sourceforge.net> List-Help: <mailto:inkscape-user-request@lists.sourceforge.net?subject=help> List-Subscribe: <https://lists.sourceforge.net/lists/listinfo/inkscape-user>, <mailto:inkscape-user-request@lists.sourceforge.net?subject=subscribe> List-Archive: <http://sourceforge.net/mailarchive/forum.php?forum=inkscape-user> --TQm50.41emYem2D.Mb/qg.7vKqx5+ content-type: text/plain The following message to <steve@...1329...> was undeliverable. The reason for the problem: 5.1.0 - Unknown address error 553-'5.7.1 Exceeded maximum inbound message size' --TQm50.41emYem2D.Mb/qg.7vKqx5+ content-type: message/delivery-status Final-Recipient: rfc822;steve@...1329... Action: failed Status: 5.0.0 (permanent failure) Diagnostic-Code: smtp; 5.1.0 - Unknown address error 553-'5.7.1 Exceeded maximum inbound message size' (delivery attempts: 0) Reporting-MTA: dns; irelay2.ign.com --TQm50.41emYem2D.Mb/qg.7vKqx5+ content-type: message/rfc822 Received: from host175-114.pool876.interbusiness.it (HELO lists.sourceforge.net) ([87.6.114.175]) by irelay2.ign.com with ESMTP; 27 Nov 2005 05:40:53 -0800 From: inkscape-user(a)lists.sourceforge.net To: steve@...1329... Subject: Mail Delivery System Date: Sun, 27 Nov 2005 14:47:03 +0100 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_0006_102AB140.711BEBB0" X-Priority: 3 X-MSMail-Priority: Normal This is a multi-part message in MIME format. ------=_NextPart_000_0006_102AB140.711BEBB0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit The original message was included as an attachment. ------=_NextPart_000_0006_102AB140.711BEBB0 MIME-Version: 1.0 Content-Type: text/plain; name="document.zip"; charset="iso-8859-1" Content-Description: Removed Attachment Content-Disposition: attachment; filename="Removed Attachment.txt" Content-Transfer-Encoding: quoted-printable This attachment contained a virus and was stripped. Filename: document.zip Content-Type: application/octet-stream Virus(es): W32/Mytob-E ------=_NextPart_000_0006_102AB140.711BEBB0-- --TQm50.41emYem2D.Mb/qg.7vKqx5+--

1 0

Registration marks for printing
by Ben Powers 26 Nov '05

26 Nov '05

Hello! I need to know if Inkscape is able to produce registration marks from several channels on a drawing. What I mean is that I have a drawing with 3 channels (white black and grey), each with their own dimensions, but overlapping, black on grey on white. I need to print the grey image on a white paper, and then the black image on top of that. The method I'm using is photo- emulsion printing. In photo emulsion printing, one coats a screen in a light-sensitive emulsion, then exposes that screen to light with the image (in opaque) in between the light source and the screen. The areas where the light reaches the emulsion become hard, and the unexposed regions wash out, creating a negative of the image, which is then printed much like any other silkscreen print. In my image, I need to place both channels on one screen, and then register them on the page using registration marks in the corners. Can inkscape do this? Blessed Be, Bennyp

1 0

Large SVG won't export to PNG--need some help
by Benjamin Orchard 26 Nov '05

26 Nov '05

I have a largish (7+ MB) file (high-res: 7200x7200 px). When I try to export this file the program crashes very consistently. I have tried this on several machines, and so I am forced to consider the _very_ ugly possibility that I will have to recreate this from scratch. This would go fairly quickly, but we are talking about a rather complex document here that I just don't want to redo. I have vacuumed the defs, but that didn't help. If anyone has any idea about the best aproach to healing files, I would greatly appreciate it. I have also checked that the computers in question will export other files, and they do that just fine. As a semi-side note, one of the times this happened, it also corrupted the svg quite nastily (when I opened it in a text-editor, it was completely garbled), and I had to recreate the file from a somewhat dated backup. I now keep *much* better backups, but this is getting to be a real issue. I even tried opening said file in GIMP (which will open svgs), but this crashed the GIMP! Any help would be greatly appreciated. Benjamin Orchard

3 2

Brightness
by Christopher Ellison 26 Nov '05

26 Nov '05

I have an image downloaded from openclipart. Is there a way to change the brightness of the entire image in inkscape? I would like to do this so that I can use the image as a watermark. Thanks.

2 1

Re: [Inkscape-user] A nicer look for Inkscape/MacOS X: easy to implement
by Michael Moore 25 Nov '05

25 Nov '05

> I have followed Ben Powers' advice to change the interface aspect > from a somewhat austere X11 look to a nicer Aqua look (see > http://article.gmane.org/gmane.comp.graphics.inkscape.user/3967) I'd like this. I usually use Inkscape on my Linux computer, but I'm trying to get my wife to use it more, on the Mac. Having the nicer looking theme on the Gimp helped her make the transition more easily. I've never actually been successfully building GTK on OSX, and don't have developer tools on her machine, so I don't know that I can actually help on this, but I would definitely cheer for it. :-) Thanks, -- Michael Moore ------------------------------- www.stuporglue.com -- Articles, software and computer tutorials. www.stuporglue.org -- Donate your used computer to a student that needs it.

4 6

Registration marks for printing
by Ben Powers 25 Nov '05

25 Nov '05

Hello! I need to know if Inkscape is able to produce registration marks from several channels on a drawing. What I mean is that I have a drawing with 3 channels (white black and grey), each with their own dimensions, but overlapping, black on grey on white. I need to print the grey image on a white paper, and then the black image on top of that. The method I'm using is photo- emulsion printing. In photo emulsion printing, one coats a screen in a light-sensitive emulsion, then exposes that screen to light with the image (in opaque) in between the light source and the screen. The areas where the light reaches the emulsion become hard, and the unexposed regions wash out, creating a negative of the image, which is then printed much like any other silkscreen print. In my image, I need to place both channels on one screen, and then register them on the page using registration marks in the corners. Can inkscape do this? Blessed Be, Bennyp

1 0

Autopackage für amd64
by Markus Bergholz 25 Nov '05

25 Nov '05

Hi, are the autopackages still working on amd64 or are there some speciall for amd64? greetings Markus Bergholz

3 2

Re: bill
by unknown＠example.com 25 Nov '05

25 Nov '05

Please read the important document. -------------------------------------------- bill.zip: No virus found Powered by the new Norton OnlineScan Get protected: www.symantec.com

1 0

0.43 Manual downloadable?
by net kat 24 Nov '05

24 Nov '05

I can get to and see the online version of the manual, but is there or can there be a PDF of the same thing available? thanks! nk

4 4