- Inkscape Users - Inkscape Mailman

FASD project: Online survey launched
by unknown＠example.com 25 May '04

25 May '04

Dear Open Source developer I am doing a research project on "Fun and Software Development" in which I kindly invite you to participate. You will find the online survey under http://fasd.ethz.ch/qsf/. The questionnaire consists of 53 questions and you will need about 15 minutes to complete it. With the FASD project (Fun and Software Development) we want to define the motivational significance of fun when software developers decide to engage in Open Source projects. What is special about our research project is that a similar survey is planned with software developers in commercial firms. This procedure allows the immediate comparison between the involved individuals and the conditions of production of these two development models. Thus we hope to obtain substantial new insights to the phenomenon of Open Source Development. With many thanks for your participation, Benno Luthiger PS: The results of the survey will be published under http://www.isu.unizh.ch/fuehrung/blprojects/FASD/. We have set up the mailing list fasd@...128... for this study. Please see http://fasd.ethz.ch/qsf/mailinglist_en.html for registration to this mailing list. _______________________________________________________________________ Benno Luthiger Swiss Federal Institute of Technology Zurich 8092 Zurich Mail: benno.luthiger(at)id.ethz.ch _______________________________________________________________________

1 0

Re: [Inkscape-user] Inkscape - insensitive mode
by Adam Pearson 22 May '04

22 May '04

Urke Thank you very much, that works very well! Regards Adam in Australia -------Original Message------- From: inkscape-user(a)lists.sourceforge.net Date: 05/22/04 23:37:12 To: inkscape-user(a)lists.sourceforge.net Subject: Re: [Inkscape-user] Inkscape - insensitive mode Autor: "Adam Pearson" <addon@...121...> [AP] MsgID: 40AEFE48.000003.02632@...122... Datum: Sat, 22 May 2004 17:16:24 +1000 > Can I undo this later - i.e. can I come back to the "insensitive" object > or group and "re-activate" it? Use TAB to navigate trough objects until insensitive object/group reached, then make it sensitive in Item Properties. -- URKE MMI :: www.urosevic.net :: ICQ UIN 104794867 Registered Linux User #280650 [counter.li.org] :: SLACKWARE LINUX Slu¹am Alabina - Alabina (Original) ------------------------------------------------------- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id149&alloc_id66&op=click _______________________________________________ Inkscape-user mailing list Inkscape-user(a)lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-user

1 0

Zoom out with right button
by Aewyn Vienna 22 May '04

22 May '04

Hello, I post it to wishlist too, I write here just for say: it would be a very-very useful feature: zoom out with right mouse button (after selecting zoom tool). Now, inkscape use it for shift+left button (or +/-, but it is slow to get off hand from mouse), gimp use ctrl+left (or +/-, but it doesnot work with numeric keyboard). So, it is hard a little bit to find "zoom out" after working hours with gimp (for me). Thanks!

1 0

Fw: Re: [Inkscape-user] Inkscape - insensitive mode
by Adam Pearson 22 May '04

22 May '04

Hi JT Thank you so much, that is excellent! Regards Adam -------Original Message------- From: inkscape-user(a)lists.sourceforge.net Date: 05/22/04 20:31:09 To: inkscape-user(a)lists.sourceforge.net Subject: Re: [Inkscape-user] Inkscape - insensitive mode J. Teubel wrote: > "1". Delete this node using the toolbar button. I meant attribute, not the node. Otherwise you would delete the object. Regards, JT

1 0

Re: [Inkscape-user] Font size in menus and dialogs and other things
by bulia byak 22 May '04

22 May '04

>For me, the problem is still there with the CVS snapshot I checked >out today. Without any special setting I get messages on the >console like > >Gtk-Message: The filename "anyname\366something" couldn't be >converted to UTF-8. (try setting the environment variable >G_FILENAME_ENCODING): Invalid byte sequence in conversion input Looks like something is wrong with your locale. We use the standard glib functions g_filename_{to/from}_utf8. Try non-ascii filenames with another GTK program, such as Gimp, and see if it works for you. >when changing to a directory which contains such filenames in the >file selection dialog. If I set G_FILENAME_ENCODING it gets even >worse. On startup I get lots of messages like > >** (inkscape:30455): CRITICAL **: Unable to load stock >pixmap /opt/inkscape-cvs/share/inkscape/icons/zoom_out.xpm Just do "make install". _________________________________________________________________ STOP MORE SPAM with the MSN Premium and get 2 months FREE* http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&SU=ht…

2 1

Inkscape - insensitive mode
by Adam Pearson 22 May '04

22 May '04

Hi all Please forgive a newcomer to Inkscape and someone who knows nothing about the programming behind the screen: Using the selector tool, I can make objects/groups of objects "insensitive", which is potentially very useful as I can then use it like e.g. Photoshop to make a quasi-layer BUT Can I undo this later - i.e. can I come back to the "insensitive" object or group and "re-activate" it? Regards to all Adam in Australia

3 3

Re: Inkscape-user digest, Vol 1 #77 - 1 msg
by Lee McLain 19 May '04

19 May '04

Hi all, I hope that I made this a bit clearer and I submitted a RFE, #957009, complete with an example. Thanks, Lee McLain inkscape-user-request(a)lists.sourceforge.net wrote: >Message: 1 >From: "bulia byak" <archiver_1@...9...> >To: inkscape-user(a)lists.sourceforge.net >Subject: RE: [Inkscape-user] Re: Inkscape-user digest, Vol 1 #75 - 1 msg >Date: Wed, 19 May 2004 01:52:42 +0000 >Reply-To: inkscape-user(a)lists.sourceforge.net > > > >> I am wondering if there is a function to make two objects split into >>separate objects where they overlap. >> >> > >"Two objects" are already "separate objects", no? Please explain in detail >how you want this to work, best of all with an example. Please submit an RFE >attaching your example, rationale for such a function (why is it useful and >why workarounds are not acceptable), plus any other information that might >help developers (e.g. proposed command name, shortcut, etc). > >_________________________________________________________________ >Add photos to your e-mail with MSN Premium. Get 2 months FREE* >http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&SU=ht… > > > > >--__--__-- > >_______________________________________________ >Inkscape-user mailing list >Inkscape-user(a)lists.sourceforge.net >https://lists.sourceforge.net/lists/listinfo/inkscape-user > > >End of Inkscape-user Digest > > > > >

1 0

RE: [Inkscape-user] Font size in menus and dialogs and other things
by bulia byak 19 May '04

19 May '04

>1) The font size of menus and dialogs is very small. > > Is there a way of changing it, e.g. to the default > size that other GTK apps use? If not (e.g. because > it is hardcoded), can someone point me to a location > in the code where I can change it? The only place where the font size is hard-coded is the top panel (under the menu). The menu and the dialogs use standard font size. And on my system, for example, the font size of Sodipodi 0.34 is noticeably smaller than that of Inkscape. Gimp 2.0 has the same font size as Inkscape. So it's more likely that Sodipodi decreases its global font size artificially (although I don't know how, could anyone explain how this is possible?). >2) It seems inkscape expects all strings (including > file names) to be UTF-8 encoded (although I do not > use a UTF-8 locale, but de_DE@...120... Thus file names > that contain german umlauts etc. cause trouble. Should not happen. This was fixed long ago. Now we use the system locale encoding for filenames. At least, KOI8-R filenames work for me. > Setting G_BROKEN_FILENAME helped here but problems > with german umlauts in sodipodi graphics remain. (I > removed them by editing the svg files manually > before loading them into inkscape). I think I know what you mean. Sodipodi (and early Inkscape) is broken in that it stores the filenames inside the SVG file in sodipodi:docname attribute, but does not recode them from the locale encoding to UTF-8. However everything inside SVG must be in UTF-8 as specified by the XML encoding declaration. Therefore these old files will cause trouble. Simply remove the docname and docbase attributes to make them parse. >3) With sodipodi I have added text elements to a drawing > which used a fixed width font and contained multiple > blanks to form a simple table. But inkscape prints > only one blank for any number of blanks in a row. Check if the element has xml:space="preserve". > How can I enter text so that multiple blanks are > displayed between two words? They are, by default. New text objects are created with xml:space="preserve". If this does not work for you, file a bug with example files attached. _________________________________________________________________ http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&SU=ht…

2 1

RE: [Inkscape-user] Font size in menus and dialogs and other things
by bulia byak 19 May '04

19 May '04

>3) With sodipodi I have added text elements to a drawing > which used a fixed width font and contained multiple > blanks to form a simple table. But inkscape prints > only one blank for any number of blanks in a row. I just tested this: created a file with multiple spaces in text in Sodipodi 0.34 and opened it in Inkscape. Works fine. _________________________________________________________________ Add photos to your e-mail with MSN Premium. Get 2 months FREE* http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&SU=ht…

1 0

Font size in menus and dialogs and other things
by Mario Streiber 19 May '04

19 May '04

Hi list, I just built and installed inkscape-0.38.1 successfully on my SuSE Linux 8.1 box. After a few initial problems importing graphics created with sodipodi, at the moment the following issues remain: 1) The font size of menus and dialogs is very small. Is there a way of changing it, e.g. to the default size that other GTK apps use? If not (e.g. because it is hardcoded), can someone point me to a location in the code where I can change it? 2) It seems inkscape expects all strings (including file names) to be UTF-8 encoded (although I do not use a UTF-8 locale, but de_DE@...120... Thus file names that contain german umlauts etc. cause trouble. Setting G_BROKEN_FILENAME helped here but problems with german umlauts in sodipodi graphics remain. (I removed them by editing the svg files manually before loading them into inkscape). Is there a way for inkscape to use other than UTF encoding? 3) With sodipodi I have added text elements to a drawing which used a fixed width font and contained multiple blanks to form a simple table. But inkscape prints only one blank for any number of blanks in a row. How can I enter text so that multiple blanks are displayed between two words? Thanks in advance Mario

3 5