- Inkscape Users - Inkscape Mailman

"Permanently Banned from Forum"
by Philip Rhoades 16 Sep '16

16 Sep '16

People, Because of this mistake: "Re: Architectural drawings? Postby Lazur URH » Wed Sep 07, 2016 6:19 pm Off topic: Sorry for the missing post by philip_rhoades, seems I made a big mistake. Will try to fix it." I keep getting a message that I have been "Permanently Banned from the Forum" - I have been waiting for a quite a while now and have sent a number of notes to the Administrator but the problem has not been fixed - does anyone have any influence that can help get this problem resolved? Thanks, Phil. -- Philip Rhoades PO Box 896 Cowra NSW 2794 Australia E-mail: phil@...2067...

2 1

Making Screen Units and SVG Units the same
by Philip Rhoades 12 Sep '16

12 Sep '16

People, When I create a new image, I get a page that, in Landscape mode, is 800 units wide and 600 units high. I know that the origin for the SVG y-axis is at the top-left of the screen and the positive direction is down and the reverse is the case for the Inkscape y-axis and I am not concerned for this exercise about printed output. I just want the absolute units on the screen to correspond to the absolute units in the SVG file that Inkscape produces - is this possible? (I couldn't find anything in the program or Googling . .) Thanks, Phil. -- Philip Rhoades PO Box 896 Cowra NSW 2794 Australia E-mail: phil@...2067...

3 2

Re: [Inkscape-user] Strange behaviour of Inkscape
by Ted Gould 11 Sep '16

11 Sep '16

Hello Henry, We have an Inkscape User mailing list that is a great place to ask about questions like this, I went ahead and CC'd it here. It is a great place for finding info on using Inkscape. I think that your problem here is probably related to the origin. Inkscape was designed with a Print mindset, putting the axis in the bottom left corner instead of a computer graphics mindset where it is in the upper left corner. SVG doesn't match that. So that means that Inkscape is translating the positions from the GUI to the SVG document. Good luck! Ted On Sun, 2016-09-11 at 11:15 +0000, Henry wrote: > Hello gentlemen, > > The Question is: How vertical coordinate calculated in Inkscape? > Is there a formula to calculate it? > > I want programarlly put the image at the corner of (0, 0) > coordinates. Actually my purpose is scale the 3406.svg to half width, > keep original height, and put the new scaled image at (0, 0), top > left corner or bottom left corner, never mind. Then I combine another > image at the right area and the two parts must be aligned. > > Please kindly refer the attached python script. > > Could you, Sir, give me any suggestion? > > Best wishes to you and your family! > Henry > > > > On Saturday, September 10, 2016 6:30 PM, Henry <deseaf@...12...> > wrote: > > > Hi Gentlemen, > > Sorry, excuse me. Maybe I should only report this to Mr. Ted Gould, > because I see Mr. Ted is the administrator of Inkscape project on > launchpad. > > Question: > How can I set the x, y of the Horizontal and Vertical coordinate both > to zero in Inkscape and keep the scale value at (0, path-height) of > matrix property in svg file NOT CHANGED. The scale value is the last > two number in matrix property, the x, y of the Horizontal and > Vertical coordinate will change automatically when I set the matrix > property to (0, path-height). On the other hand, the last two number > in matrix property will change automatically when I set the x, y of > the Horizontal and Vertical coordinate. > > Such behaviour of Inkscape troubled and puzzled me, please refer the > attachment. > > Could I report it as a bug or can anyone give me some explain about > it, any help will be great appreciation for me. > > Best Regards, > Henry > > >

1 0

Question in Brazilian Portuguese
by Maren Hachmann 07 Sep '16

07 Sep '16

Hi everyone, in the Inkscape answers section, there's a question in pt-br. Is anyone who speaks the language available to explain the copy-pasting of a gradient from one object to another to a noob in Portuguese? (I understand when it's written, but can't speak or write, and google translate is a bit clunky - also, there's mostly the spammers and me answering any questions in the answers section, I'd like to see that changed ;-)) https://answers.launchpad.net/inkscape/+question/381073 Thanks! Regards, Maren

4 13

Re: [Inkscape-user] [Bug 1258842] Re: No page for vectors vs. Bitmaps
by ugajin 02 Sep '16

02 Sep '16

@Martin Owens https://bugs.launchpad.net/inkscape-web/+bug/1258842 You are not as disappointed as I am with you. Irregular is right. How dare you speak to me this way. You were clearly told, before you went ahead and made the page live, that I did not have a working picture plugin. I am not responsible if you do not provide the tools needed to upload image files. It was and/or ought to have been clear to anyone with eyes to see, that the test page relied on external links, and you were directed to this fact. Further, I did not ask you to download files from my web-site. In fact you downloaded the said files without asking, and without my consent. Is this how you generally behave, and treat artists? If so, shame on you, and shame on you for doing it to me. I provided links to those resources only, and not the resources themselves, Inkscape have no claim on them, or right to host those image files. Please remove them, and please refer this matter to the Board. It seems to me, it was a very small thing indeed, especially in the circumstances to ask that someone replace dirty files with clean ones, not least because I did not have the tools, and/or permissions to replace them at that time. We were so close to getting the thing right, and your hostile reaction is totally innapropriate. I have put a lot of hard work into this project, and I have had few thanks for doing so. As a reward for my effort, you have taken artwork which does not belong to you, and in addition you removed my editor priviledges. I cannot trust, or work with you again. Whatever your problem is, it should be with yourself with who you are disappointed, and to be treated and spoken too, by you in this way, is wholly unacceptable. Thanks to you, I have deleted, the guides, and viewBox extension files from my resources directory. I am more dissapointed than you can possiblt know, or imagine, and you can of course file your own bug report. I will not be the assignee for the 'No page for vectors vs. Bitmaps' bug, thank you. -u ---- On Fri, 02 Sep 2016 16:23:22 +0000 Martin Owens <doctormo@...155...> wrote ---- @ugajin - The files you provided on the page were published as live. I'm disappointed that you have come back to me now, after the publish time, to tell me the graphics were not the final versions. This is highly irregular and I will not change the files at this time. When we come back to this page in the future, we can update the graphics. But I have committed the page in it's current state and with that I complete this long bug report as Fixed Released. Please open another bug report to update the graphics. Maren if you need to track the svg picture plugin issue, or a bug report to make our own plugin, please go ahead. ** Changed in: inkscape-web Importance: Undecided => Low ** Changed in: inkscape-web Status: New => Fix Released ** Changed in: inkscape-web Assignee: (unassigned) => rant (ugajin) -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/1258842 Title: No page for vectors vs. Bitmaps Status in Inkscape-website: Fix Released Bug description: This page here: http://quasdar.deviantart.com/art/Bitmaps-vs-Vectors-323184682 Looks like the kind of information we may want on the website. To manage notifications about this bug go to: https://bugs.launchpad.net/inkscape-web/+bug/1258842/+subscriptions

1 0

** (inkscape.exe:66232): WARNING **: unknown type: v:textRect
by Andrew Louie 02 Sep '16

02 Sep '16

** (inkscape.exe:66232): WARNING **: unknown type: v:textRect ** (inkscape.exe:66232): WARNING **: unknown type: v:textBlock When I run inkscape from the command line to do things like convert to PDF, I get a bunch of these warnings. The drawings i'm converting were drawn in inkscape originally. Any idea on how to either: suppress the warnings, or fix the issue? opening the drawing in inkscape GUI does not show any anomalies. Thanks! -- -Andrew Louie :wq

1 0

Isometric Inkscape logo
by Martin Owens 06 Aug '16

06 Aug '16

I thought this design was really interesting and wanted to share with the rest of the inkscape community: https://inkscape.org/it/~Alex_L/%E2%98%85inkscape-icon-for-kde-breeze-i con-theme It's been made so the icon can be visible on dark themes. I kind of like the look, and if we ever did a special version for CNC/cad this is the logo I'd use :-) Best Regards, Martin Owens

3 3

Transparency bug with clipping ?
by Pierre Massat 04 Aug '16

04 Aug '16

Dear all, I'm working on a poster (which needs to be delivered tomorrow...), and when attempting to export it as pdf I realized that some transparency was lost. After quite some time spent trying to figure it out, it turns out that it's most likely because of clipping. Transparent objects in a clipped group loose their transparency when exported, while they keep it if their group is not clipped (e.g. when I ungroup the clipped group). Please see the file attached. Try to export it as pdf, with all defaults. You should see that the circles on the main map at the top are transparent, while those who belong to a group that was clipped (for instance in the zoomed map of Europe at the top, or in both maps at the bottom). This looks a lot like a bug to me. Do you know how I can fix that ? I need the clipped version of the map of course, the other one won't fit in my layout... Thank you in advance for your help. Pierre.

3 5

Measure Line LPE II
by Jabier Arraiza 01 Aug '16

01 Aug '16

Hi, sorry for the double link to video but the LPE now have a lot of changes on it. The mayor change are an -optional- follow to DIM standar CAD measure. Thanks so much to all who help me on development. Mark Schafer, Tobias Ellinghaus, CR, su_v... Special thanks to Johannes Rutzmoser for his cool extension for inkscape https://github.com/Rutzmoser/inkscape_dimensioning It help me a lot on the development to follow DIN standar. Here are the video. https://www.youtube.com/watch?v=ppgt2GPm1IY All the best, Jabier.

1 0

Re: [Inkscape-user] [Inkscape-devel] My last work on Inkscape
by Jabier Arraiza 29 Jul '16

29 Jul '16

Thanks, I do it, finaly I need another collapsable :) The number.unit is insensitive -locked, maybe also I add an option to override it, not sure. Cheers, Jabier. El vie, 29-07-2016 a las 09:38 +0100, Alex Valavanis escribió: > Looks awesome! Can an option be added to change the spacing between > the > number and the unit? > > AV > > On 28 Jul 2016 3:30 p.m., "Jabier Arraiza" <jabier.arraiza@...2982...> > wrote: > > > > > Hi to all. > > > > Following a CR idea, I done my last work. I hope you like it! > > https://www.youtube.com/watch?v=onqVu_SWeMU > > > > All the best, Jabier. > > > > > > > > ----------------------------------------------------------------- > > ------------- > > _______________________________________________ > > Inkscape-devel mailing list > > Inkscape-devel(a)lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/inkscape-devel > >

1 0