- Inkscape Users - Inkscape Mailman

Re: [Inkscape-user] [Inkscape-devel] Ubuntu installation error
by Susan Spencer 14 Jun '13

14 Jun '13

Hi Adib! I have Ubuntu 12.04 LTS. Thanks for asking about sources. In response to your questions, I removed the cafuego PPA from Ubuntu software sources, Then installed Inkscape trunk 0.48.3.1 r9886 from Ubuntu software center. Knotter error messages still result but Inkscape is working properly. ( perhaps there is still some reference to knotter in the install/uninstall script?) Here's the history of install/reinstall (with Ubuntu software center, not 'sudo apt-get install'): - added cafuego PPA - upgraded from 0.48.3.1-ubuntu1.1 to 0.49-devel-12340+11~precise (may 25) - 0.49-devel-12346 (jun 02) - 0.49.-devel-12347 (jun 06) - inset/outset errors - 0.49.-devel-12362 (jun 11) - 0.49.-devel-12370 (jun 12) - knotter error messages - removed cafuego PPA (today) - uninstalled 0.49-devel-12370 - knotter error messages - not 'real' errors? - installed 0.48.3.1 r9886 - knotter error messages - not 'real' errors? - uninstalled 0.48.3.1 r9886 - knotter error messages - not 'real' errors? - reinstalled 0.48.3.1 r9886 - knotter error messages - not 'real' errors? *Inkscape appears to have installed properly because it runs fine (so far).* - Susan On Thu, Jun 13, 2013 at 11:35 AM, the Adib <theadib@...155...> wrote: > Hello Susan, > > could you specify which version of Ubuntu and which version of Inkscape > you combined? > > Ubuntu: > I assume you used the 12.04 LTS version > also a list of you additional package source the time you installed > inkscape would be helpfull. > > Inkscape: > please specify the source where you get inkscape from? Which PPA did you > use or did you installed a .deb package? > > Best regards, > > Adib. > -- > > > On Wed, Jun 12, 2013 at 7:10 PM, Susan Spencer <susan.spencer@...155...>wrote: > >> Today's Inkscape update resulted in an error on my laptop with Ubuntu >> 12.04. >> If no one else can corroborate problems with today's >> Ubuntu Software Center Inkscape update >> then I won't post it on Launchpad. >> >> It's entirely possible that it's my specific installation of Inkscape, >> given the recent problem with outsets/insets after >> installing nightly build/uninstalling/reinstalling from Ubuntu ppa. >> (That problem went away sometime during the past week.) >> >> So, anybody else get this on Ubuntu 12.04 (or other Ubuntu version) >> during today's Software Center package update? >> >> *installArchives() failed: (Reading database ... * >> *(Reading database ... 5%%* >> *(Reading database ... 10%%* >> *(Reading database ... 15%%* >> *(Reading database ... 20%%* >> *(Reading database ... 25%%* >> *(Reading database ... 30%%* >> *(Reading database ... 35%%* >> *(Reading database ... 40%%* >> *(Reading database ... 45%%* >> *(Reading database ... 50%%* >> *(Reading database ... 55%%* >> *(Reading database ... 60%%* >> *(Reading database ... 65%%* >> *(Reading database ... 70%%* >> *(Reading database ... 75%%* >> *(Reading database ... 80%%* >> *(Reading database ... 85%%* >> *(Reading database ... 90%%* >> *(Reading database ... 95%%* >> *(Reading database ... 100%%* >> *(Reading database ... 877256 files and directories currently installed.) >> * >> *Preparing to replace inkscape 0.49~devel+12362+11~precise1 (using >> .../inkscape_0.49~devel+12370+11~precise1_i386.deb) ...* >> *Unpacking replacement inkscape ...* >> *Preparing to replace telepathy-gabble 0.16.0-0ubuntu3 (using >> .../telepathy-gabble_0.16.0-0ubuntu3.1_i386.deb) ...* >> *Unpacking replacement telepathy-gabble ...* >> *Processing triggers for man-db ...* >> *Processing triggers for hicolor-icon-theme ...* >> *Processing triggers for bamfdaemon ...* >> *Rebuilding /usr/share/applications/bamf.index...* >> *Processing triggers for desktop-file-utils ...* >> *Processing triggers for gnome-menus ...* >> *Setting up knotter (0.9.3-2) ...* >> */var/lib/dpkg/info/knotter.postinst: 3: >> /var/lib/dpkg/info/knotter.postinst: update-menus: not found* >> *dpkg: error processing knotter (--configure):* >> * subprocess installed post-installation script returned error exit >> status 127* >> *Setting up inkscape (0.49~devel+12370+11~precise1) ...* >> *No apport report written because MaxReports is reached already* >> *Setting up telepathy-gabble (0.16.0-0ubuntu3.1) ...* >> *Processing triggers for libc-bin ...* >> *ldconfig deferred processing now taking place* >> *Errors were encountered while processing:* >> * knotter* >> *Error in function: * >> *Setting up knotter (0.9.3-2) ...* >> */var/lib/dpkg/info/knotter.postinst: 3: >> /var/lib/dpkg/info/knotter.postinst: update-menus: not found* >> *dpkg: error processing knotter (--configure):* >> * subprocess installed post-installation script returned error exit >> status 127* >> * >> * >> - Susan >> >> >> >> ------------------------------------------------------------------------------ >> This SF.net email is sponsored by Windows: >> >> Build for Windows Store. >> >> http://p.sf.net/sfu/windows-dev2dev >> _______________________________________________ >> Inkscape-devel mailing list >> Inkscape-devel(a)lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/inkscape-devel >> >> >

1 0

Ubuntu installation error
by Susan Spencer 13 Jun '13

13 Jun '13

Today's Inkscape update resulted in an error on my laptop with Ubuntu 12.04. If no one else can corroborate problems with today's Ubuntu Software Center Inkscape update then I won't post it on Launchpad. It's entirely possible that it's my specific installation of Inkscape, given the recent problem with outsets/insets after installing nightly build/uninstalling/reinstalling from Ubuntu ppa. (That problem went away sometime during the past week.) So, anybody else get this on Ubuntu 12.04 (or other Ubuntu version) during today's Software Center package update? *installArchives() failed: (Reading database ... * *(Reading database ... 5%%* *(Reading database ... 10%%* *(Reading database ... 15%%* *(Reading database ... 20%%* *(Reading database ... 25%%* *(Reading database ... 30%%* *(Reading database ... 35%%* *(Reading database ... 40%%* *(Reading database ... 45%%* *(Reading database ... 50%%* *(Reading database ... 55%%* *(Reading database ... 60%%* *(Reading database ... 65%%* *(Reading database ... 70%%* *(Reading database ... 75%%* *(Reading database ... 80%%* *(Reading database ... 85%%* *(Reading database ... 90%%* *(Reading database ... 95%%* *(Reading database ... 100%%* *(Reading database ... 877256 files and directories currently installed.)* *Preparing to replace inkscape 0.49~devel+12362+11~precise1 (using .../inkscape_0.49~devel+12370+11~precise1_i386.deb) ...* *Unpacking replacement inkscape ...* *Preparing to replace telepathy-gabble 0.16.0-0ubuntu3 (using .../telepathy-gabble_0.16.0-0ubuntu3.1_i386.deb) ...* *Unpacking replacement telepathy-gabble ...* *Processing triggers for man-db ...* *Processing triggers for hicolor-icon-theme ...* *Processing triggers for bamfdaemon ...* *Rebuilding /usr/share/applications/bamf.index...* *Processing triggers for desktop-file-utils ...* *Processing triggers for gnome-menus ...* *Setting up knotter (0.9.3-2) ...* */var/lib/dpkg/info/knotter.postinst: 3: /var/lib/dpkg/info/knotter.postinst: update-menus: not found* *dpkg: error processing knotter (--configure):* * subprocess installed post-installation script returned error exit status 127* *Setting up inkscape (0.49~devel+12370+11~precise1) ...* *No apport report written because MaxReports is reached already* *Setting up telepathy-gabble (0.16.0-0ubuntu3.1) ...* *Processing triggers for libc-bin ...* *ldconfig deferred processing now taking place* *Errors were encountered while processing:* * knotter* *Error in function: * *Setting up knotter (0.9.3-2) ...* */var/lib/dpkg/info/knotter.postinst: 3: /var/lib/dpkg/info/knotter.postinst: update-menus: not found* *dpkg: error processing knotter (--configure):* * subprocess installed post-installation script returned error exit status 127* * * - Susan

2 1

What auxiliary programs are needed?
by john Culleton 13 Jun '13

13 Jun '13

I already have a fairly complete stock of publishing-related programs. So is there a list somewhere of the got-to haves for full Inkscape use? For example is Ghostscript necessary to create pdf files etc.? I am writing a book and I don't want to give bad advice. -- John Culleton Wexford Press Free list of books for self-publishers: http://wexfordpress.net/shortlist.html PDF e-book: "Create Book Covers with Scribus" available at http://www.booklocker.com/books/4055.html

3 2

Q: How to Generate a Rotated linearGradient whose angle will stick?
by Shlomi Fish 11 Jun '13

11 Jun '13

Q: in my extension I have this: class StyleEffect(GenericAddPathEffect): def effect(self): self.xpathSingle(u'svg:defs').insert(0, inkex.etree.XML('''<svg:linearGradient xmlns:svg="http://www.w3.org/2000/svg" xmlns="http://www.w3.org/2000/svg" id="bk2hp_grad"> <stop style="stop-color:#0000ff;stop-opacity:1" offset="0" id="b2h_0" /> <stop style="stop-color:#00deff;stop-opacity:1" offset="0.4" id="b2h_1" /> <stop style="stop-color:#00deff;stop-opacity:1" offset="0.6" id="b2h_2" /> <stop style="stop-color:#0000ff;stop-opacity:1" offset="1" id="b2h_3" /> </svg:linearGradient>''') ) self.xpathSingle(u'svg:defs').insert(1, inkex.etree.XML('''<svg:linearGradient xmlns:svg="http://www.w3.org/2000/svg" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" id="bk2hp_grad_rot" gradientTransform="rotate(90)" xlink:href="#bk2hp_grad" />''') ) self.xpathSingle(u'//*[@id="' + main_path_id() + '"]').set( 'style', simplestyle.formatStyle({ 'stroke': '#888888', 'stroke-width': '1pt', 'fill': 'url(#bk2hp_grad_rot)', } )) Which generates a linearGradient and a rotated version of it. However, when I move the path filled with the rotation, it reverts to the non-rotated version. I'm attaching it here. Why is Inkscape doing it? Is it a bug? You can find the extension in question here: https://github.com/shlomif/Shlomi-Fish-Back-to-my-Homepage-Logo/blob/master… Regards, Shlomi Fish -- ----------------------------------------------------------------- Shlomi Fish http://www.shlomifish.org/ NSA Factoids - http://www.shlomifish.org/humour/bits/facts/NSA/ If the mountain will not come to Muhammad, then Muhammad will go to the mountain. — Francis Bacon Please reply to list if it's a mailing list post - http://shlom.in/reply .

2 2

Handy use for Inkscape.
by john Culleton 07 Jun '13

07 Jun '13

Given some blank forms from my doctor to fill out (pdf files) I found Inkscape to be very handy. I locked the original layer and used a new "text" layer to do the inserts. Handier than Scribus, actually. -- John Culleton Wexford Press Free list of books for self-publishers: http://wexfordpress.net/shortlist.html PDF e-book: "Create Book Covers with Scribus" available at http://www.booklocker.com/books/4055.html

2 1

Outset/Inset problems - bug or not?
by Susan Spencer 07 Jun '13

07 Jun '13

I have Ubuntu 12.04 and Inkscape 0.48+devel r12347 Two weeks ago I installed the nightly build from Inkscape, then decided against it and uninstalled/reinstalled Inkscape from Ubuntu software center. Since then the outset/inset function has generated incorrect results for some shapes. Here's a link to a file which demonstrates this problem: https://docs.google.com/file/d/0BxsnjDIHW4yvRGRhYkVEa0E2UVk/edit?usp=sharing Is this a bug or has my current installation gone awry? Thanks for any feedback on this issue! - Susan

1 0

OT: Quasado StageStack (FreeHand replacement) considering opensource
by William Adams 06 Jun '13

06 Jun '13

post on it here: http://libregraphicsworld.org/blog/entry/stagestack-faces-dead-end Any way this could be of use to anyone? William -- William Adams senior graphic designer Fry Communications Sphinx of black quartz, judge my vow.

1 0

Tips: How to Invoke One Inkscape Extension from Another + Other stuff I learned when writing the extension
by Shlomi Fish 06 Jun '13

06 Jun '13

Hi all, here are some tips you can use from my experience on working on an inkscape extension: 1. Calling one extension from another: -------------------------------------- This is the recipe I used in Python to call one extension from another: import subprocess def id_arg(my_id): return '--id=' + my_id with_perspective_applied_text = subprocess.check_output( ['python', '/usr/share/inkscape/extensions/perspective.py', id_arg(main_path_id()), id_arg(pers_e.get_path_id()), pers_e.calc_out_fn() ] ) main_path_id() and pers_e.get_path_id() are the IDs passed to the extension as selections and pers_e.calc_out_fn() contains the path to where the intermediate SVG was written. This can be done securely by doing: temp_dir = tempfile.mkdtemp() def temp_svg_fn(basename): global temp_dir return join(temp_dir, basename + '.svg') 2. Output from inkex.Effect to a file. ------------------------------------------ The following class that inherits from inkex.Effect writes to a temporary file instead of to STDOUT. [QUOTE] class GenericAddPathEffect(inkex.Effect): def __init__(self, basename): self.basename = basename inkex.Effect.__init__(self) def effect(self): draw_generic_style_path(self.get_path_name(), self.get_path_id(), self.current_layer, self.calc_d_s() ) def calc_out_fn(self): return temp_svg_fn(self.basename) def write_to_temp(self, input_fn): self.affect(args=[input_fn], output=False) with open(self.calc_out_fn(), 'w') as fh: self.document.write(fh) return [/QUOTE] Customise it to your heart's content. (Note that the passing of parameters is a little counter-intuitive now - I'm planning to fix it). 3. Adding a gradient: --------------------- You can add a gradient by manipulating the <defs section in the file. See: [QUOTE] class StyleEffect(GenericAddPathEffect): def effect(self): self.xpathSingle(u'svg:defs').insert(0, inkex.etree.XML('''<svg:linearGradient xmlns:svg="http://www.w3.org/2000/svg" xmlns="http://www.w3.org/2000/svg" id="bk2hp_grad"> <stop style="stop-color:#0000ff;stop-opacity:1" offset="0" id="b2h_0" /> <stop style="stop-color:#00deff;stop-opacity:1" offset="0.4" id="b2h_1" /> <stop style="stop-color:#00deff;stop-opacity:1" offset="0.6" id="b2h_2" /> <stop style="stop-color:#0000ff;stop-opacity:1" offset="1" id="b2h_3" /> </svg:linearGradient>''') ) self.xpathSingle(u'svg:defs').insert(1, inkex.etree.XML('''<svg:linearGradient xmlns:svg="http://www.w3.org/2000/svg" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" id="bk2hp_grad_rot" gradientTransform="rotate(90)" xlink:href="#bk2hp_grad" />''') ) self.xpathSingle(u'//*[@id="' + main_path_id() + '"]').set( 'style', simplestyle.formatStyle({ 'stroke': '#888888', 'stroke-width': '1pt', 'fill': 'url(#bk2hp_grad_rot)', } )) [/QUOTE] ========================== Regards, Shlomi Fish -- ----------------------------------------------------------------- Shlomi Fish http://www.shlomifish.org/ List of Text Editors and IDEs - http://shlom.in/IDEs Flock aims to be the browser for the social web, but I found it to be the completely anti-social browser. Please reply to list if it's a mailing list post - http://shlom.in/reply .

1 0

svg for web pages.
by john Culleton 01 Jun '13

01 Jun '13

I am planning to convert one of my web sites to all-svg. I am wondering about the use of a site map. Is it the same as for an html site (with different names of course)? -- John Culleton Wexford Press Free list of books for self-publishers: http://wexfordpress.net/shortlist.html PDF e-book: "Create Book Covers with Scribus" available at http://www.booklocker.com/books/4055.html

7 10

Inkscape as a (assistent) font editor
by Maarten van der Velde 31 May '13

31 May '13

I've put together something that might be interesting for Inkscape-users (as I am myself) As a side effect of an effort to create multi-colored webfonts, I've written a Ruby script that converts an Inkscape file to a SVG font. The workflow would be as follows: -Open a pre-build 'template' SVG file -This file contains: - an Inkscape layer for each character - guides for the basic font metrics - per layer an extra rectangle to indicate the character-width -Draw a character in each layer. (and make sure they're 'paths') -adjust the guides to match your font metrics (ascenders, descenders, x-height, cap-height) -save the file as a SVG file -run the script --> SVG font!!! The font can now be edited further in, for example, FontForge and exported to TTF etc. Everything is still very much 'in progress' but it might already be of interest for some of you. I've put a more elaborate explanation on my website, together with a link to the scripts in GitHub: http://www.ideogram.nl/content/multicolorfont Ofcourse, feedback is very welcome! (I know Inscape has a build in font-editor, but I find it quite clumsy to use. This script doesn't use it at all.) I hope you don't mind I advertise my work in this way, but apart from some feedback and help, there's no earnings in it for me and if it turns out to be helpful for you, the community only gains from it.

1 0