- Inkscape Users - Inkscape Mailman

Photo retouching in Inkscape
by Claus Cyrny 12 Dec '09

12 Dec '09

Hi, due to my Ubuntu upgrade yesterday, I'm actually not sure if my last post made it to the list, so here it is again. Here's a link to my latest attempt at using Inkscape for photo retouching: http://home.arcor.de/ccyrny/images/bild015_neg.nr.n15a._detail_4x.jpg For me, this is better than mere bitmap editing, due to the necessity to edit larger areas, where the clone brush doesn't work so well. The keys of the technique I used here are a) that the inserted vector shapes are slightly blurred, b) that they are semi-transparent, in order to blend better with the rest of the image. My work flow: a) Importing the photograph into Inkscape (as a PNG or TIFF). b) Drawing the vector shapes.This implies single-color fills as well as linear gradients where necessary.(Shapes where 'Stroke' is disabled are more flexible for retouching.) c) 'Select All'. d) Exporting the final image for fine-tuning into Gimp, CinePaint, Krita, or whatever (I'm working under Ubuntu Linux). e) Fine-tuning, final adjustment of color levels, advanced Unsharp Mask. Claus -- - Me on Flickr <http://www.flickr.com/photos/claus_01/> - Me on Twitter <http://twitter.com/claus_01/>

1 1

combining complex paths (Ctrl + K); 0.47 freezes, 0.46 fine
by unknown＠example.com 11 Dec '09

11 Dec '09

Hello again, I opened a complex dxf-drawing (saved as pdf from SolidWorks). File A) combined 1700 objects with "Ctrl + K": Inkscape 0.46-->1sec; Inkscape 0.47-->80sec File B) combined 3000 objects with "Ctrl + K": Inkscape 0.46-->2sec; Inkscape 0.47-->freezes This really looks like a major bug. I am afraid with these kinds of complex drawings I´ll have to stick to 0.46 until it is fixed. Can anyone confirm this kind of behaviour? Lindauer DORNIER GmbH Rickenbacher Str. 119 88129 Lindau / Germany Phone: +49 8382 703-0 Fax: +49 8382 703-4 15 webmaster@...2272... http://www.lindauerdornier.com Commercial Registry: HR Kempten Nr. B/1220 Chairman of the Supervisory Board: Prof. Dr. Dieter Feddersen, Managing Directors: Peter D. Dornier (CEO), Michael Ebeling, Dr. Andreas Rutz, Hans-Jürgen Schmidt (CFO)

3 3

0.47 too slow with complex drawings plus tablet
by unknown＠example.com 10 Dec '09

10 Dec '09

I have been using inkcape 0.46 professionally for technical illustration for quite a while now. Most of our linedrawings are based on 3D-Cad data. The model is saved from SolidWorks as a as a dxf-drawing (Well I save it as a pdf). Importing these complex models in Inkscape results in up to 50.000 single paths (objects). Working with 0.46 is almost on the limit, but in outline mode it runs ok. So far with 0.46 I did not notice any difference between speed when working with mouse or with a wacom tablet when working with these complex drawings. With 0.47 the behaviour when using a tablet really is worrying: a) Drawing a bezier curve with the pen tool is delayed; the canvas is not responding immediately with pen touch. b) I cannot add nodes with my tablet, by simply touching the path (Strg + Alt + click) c) text tool is not responding propperly Surprisingly with the mouse: a,b,c run smoothly with 0.47. with tablet: with small drawings a,b,c run smoothly with 0.47 (but not with complex drawings) A new user (using a tablet) would certainly be dissapointed about inkscape. Luckily I have started with 0.46 and don´t want to swapp inkcape with any other tool. Can anyone of you confirm this weird tabelt behaviour? If so, shouldn´t I post a bug about this? Lindauer DORNIER GmbH Rickenbacher Str. 119 88129 Lindau / Germany Phone: +49 8382 703-0 Fax: +49 8382 703-4 15 webmaster@...2272... http://www.lindauerdornier.com Commercial Registry: HR Kempten Nr. B/1220 Chairman of the Supervisory Board: Prof. Dr. Dieter Feddersen, Managing Directors: Peter D. Dornier (CEO), Michael Ebeling, Dr. Andreas Rutz, Hans-Jürgen Schmidt (CFO)

3 3

Photo editing in Inkscape
by Claus Cyrny 10 Dec '09

10 Dec '09

Hi all, I thought of posting this to the list. This is a photo I edited using Inkscape (vector shapes & eye shadow): http://bit.ly/58x34k Cheers, Claus

6 12

Screen, icons and themes
by Alessandro Antonello 09 Dec '09

09 Dec '09

Hi, all. I was playing around with 'inkscapec.exe' because now I can see several output message that I had not idea. One of those is the following: (inkscape.exe:3660): Gtk-WARNING **: Could not find the icon 'object-visible'. The 'hicolor' theme was not found either, perhaps you need to install it. You can get a copy from: http://icon-theme.freedesktop.org/releases I know nothing about GTK but, since I am a Windows developer I became curious of how can I change some elements of the Inkscape interface without recompile the software. I did a little search in the Inkscape.org WEB site but I didn't find anything. Someone could point me to a reference place? Thanks a lot, Alessandro Antonello

2 1

Problems with SVG
by Programmer In Training 08 Dec '09

08 Dec '09

I'm not sure if it's my browsers (I'm certain it is) or the image itself (fairly certain it isn't), but I thought I'd ask for opinions. I made a real basic image[1] (just trying to get used to the controls) and decided to check it out in my favorite browser (and the other two I have installed). I was not happy with the results[2]-[4]. IE8 just tries to download the file! [1]: http://www.joseph-a-nagy-jr.us/images/svg-test/pool.svg [2]: http://www.joseph-a-nagy-jr.us/images/svg-test/what-firefox-sees.png [3]: http://www.joseph-a-nagy-jr.us/images/svg-test/what-i-created.png [4]: http://www.joseph-a-nagy-jr.us/images/svg-test/what-safari-sees.png

7 12

compiling 0.47 dependency hell
by Elwin Estle 08 Dec '09

08 Dec '09

I am attempting to compile 0.47 on Slackware 13.0. I run configure then hit a snag: configure: error: libgc (the Boehm Conservative Collector) 6.4+, is needed to compile inkscape -- http://www.hpl.hp.com/personal/Hans_Boehm/gc I have downloaded the code from the URL mentioned above, it compiles fine. Then I try to compile Inkscape, and it still gives me the above error. I did "make uninstall" on the gc package and downloaded the exact 6.4 package. Compiled it...still no joy. Uninstalled that. Went to Slacky.eu and downloaded a precompiled gc 7.1 and installed that... Still getting the same error. What am I doing wrong? Is it looking for some sort of development headers? If so...whereinheck do I get those?

2 1

Issues with pdf output and rasterized effects.
by John Harrold 07 Dec '09

07 Dec '09

Howdy Folks, I'm using 0.47 on OS X (10.5.8/Leopard). I've run into a problems trying to export PDFs. Here is a test file I'm working with: http://dl.dropbox.com/u/1901170/Inkscape%20Tests/test.svg If I save as a pdf with the following options: - Convert texts to paths (checked) - Rasterized filter effects (unchecked) - Resolution for rasterization (600 dpi) - Export area is drawing (unchecked) - Export area is page (checked) I produce the following pdf output: http://dl.dropbox.com/u/1901170/Inkscape%20Tests/test-not_rasterized.pdf which looks right, but eliminates the blurred elements. Next I try to save using the following options in order to preserve the blurred portion of the figure: If I save as a pdf with the following options: - Convert texts to paths (checked) - Rasterized filter effects (checked) - Resolution for rasterization (600 dpi) - Export area is drawing (unchecked) - Export area is page (checked) http://dl.dropbox.com/u/1901170/Inkscape%20Tests/test-not_rasterized.pdf Basically checking "rasterize filtered effects". Some of the blurred elements look fine, but several components of the drawing disappear completely. Can anyone point out what I'm doing wrong here? -- John M Harrold

2 2

Color Management on OSX
by Chris Tregenza 04 Dec '09

04 Dec '09

Inkscape 0.47 r22583 Built Nov 24 2009 OSX 10.5.8 None of the color management options work. The Inkscape Preferences -> Colour Management tab has a drop-down list for Display Profile. This only lists <None> as an option. The mouse-over says that it checks four different directories. I have confirm that all four directories exist and at least one of them contains valid ICC profiles (e.g. they work correctly in Scribus). The Device Profile drop-down on the same tab, has no options, appears to be greyed out and has no mouse-over information. Is this a bug or am I missing something? Any help or suggestions appreciated. I'm trying to create a CMYK compatible PNG file for import into a PDF that is going to a professional printers. Many thanks Chris

4 6

Command line
by Alessandro Antonello 04 Dec '09

04 Dec '09

Hi, all. Apparently the command line interface of Inkscape is not working properly. I usually export PNG files from command line because is much more quickly than open every single SVG to export in the GUI interface. After the upgrade to the 0.47 version I cannot export the PNG this way anymore. There is no error message. It simply output nothing. I use Inkscape on a Windows XP Service Pack 3. The command line that I usually use to export the files is: inkscape -f file.svg -e file.png -h 64 -w 64 I review the options in the WEB about the command line and appears to me that nothing was changed from the older version. Someone has a clue? Best regards, Alessandro Antonello

4 4