- Inkscape Users - Inkscape Mailman

Huge Problem
by Jair Andres Moreno 07 Feb '05

07 Feb '05

Hi, i have a pc with a Pentium IV and 512 of ram, and i installed inkscape, but i runs very slow. i don't know what happen. some people told me that inkscape runs faster than other similar products like corel. but i doesn't seem to me. Can someone help me?

3 2

Inkscape 0.41pre2 posted
by Ted Gould 07 Feb '05

07 Feb '05

Inkscape 0.41pre2 has been posted here: https://sourceforge.net/project/showfiles.php?group_id=93438&package_id=991… It is currently expected that this will be the last prerelease before 0.41, please check it for any bugs so they won't make it into 0.41! --Ted

1 0

guide lines
by Cristian Balan 06 Feb '05

06 Feb '05

How can I define the exact position of a guideline? i.e. the x coordinate for the vertical ones and the y for the orizontals? Thank you, Cristian Balan

2 1

Re: [Inkscape-user] multi-page? default measurement units? wizard?
by unknown＠example.com 06 Feb '05

06 Feb '05

On Sat, Feb 05, 2005 at 10:22:34PM -0800, Jeremy C. Reed wrote: > (I attempted twice to join this list yesterday but never received an email > asking to confirm. Please carbon-copy me on replies.) > > Hello inkscape community: > > Thank you for inkscape. I have a few comments/questions. > > 1) Multi-page documents? My wife made a brochure but didn't like having to > have two separate files for the outside and inside of her document. Does > the file format allow multiple pages? And where is this documented? The fileformat allows for multiple pages, but Inkscape presently does not have the capability to edit such files. This feature will probably get added eventually, but it's not in the near term plans. Some people have good results at using Scribus; you can insert SVG created with Inkscape into Scribus for further layout and publishing. > 2) I want to have my grid and other measurements to be in inches. Where > can the default units be defined so when I start up inkscape it shows > inches? Where is this documented? (I know how to change it for one session > or per document but I want it as the default -- and should not require > recompiling.) This may not be implemented. We do not have documentation about managing units or the grid; if you'd be interested in writing something up that'd be a great addition. > 3) My wife used to use commercial and proprietary software that had > wizards and easy interface for making brochures and greeting cards. Using > inkscape in addition to openclipart is a substitute, but still all the > layout must be done, images found and saved, resized, etc. > > Any thoughts on a wizard or a simple interface to help? Not that I know of. As I mentioned above, you may find it useful to put some time into learning Scribus. It provides a more complete featureset for doing printing, brochures, etc. However, you'll need to put some time into learning it, and the interface is distinctly different from Inkscape, so be forewarned about that. However, I've heard good comments about it from professional printers, so it may be well worth the time. Bryce

2 3

multi-page? default measurement units? wizard?
by Jeremy C. Reed 06 Feb '05

06 Feb '05

(I attempted twice to join this list yesterday but never received an email asking to confirm. Please carbon-copy me on replies.) Hello inkscape community: Thank you for inkscape. I have a few comments/questions. 1) Multi-page documents? My wife made a brochure but didn't like having to have two separate files for the outside and inside of her document. Does the file format allow multiple pages? And where is this documented? 2) I want to have my grid and other measurements to be in inches. Where can the default units be defined so when I start up inkscape it shows inches? Where is this documented? (I know how to change it for one session or per document but I want it as the default -- and should not require recompiling.) 3) My wife used to use commercial and proprietary software that had wizards and easy interface for making brochures and greeting cards. Using inkscape in addition to openclipart is a substitute, but still all the layout must be done, images found and saved, resized, etc. Any thoughts on a wizard or a simple interface to help? Jeremy C. Reed open source, Unix, *BSD, Linux training http://www.pugetsoundtechnology.com/

3 2

CMYK in Inkscape
by Valentin Cristescu 06 Feb '05

06 Feb '05

Hi, please I want to know all about CMYK in Inkscape. Where do I get CMYK modules for Inkscape? Valentin

2 3

Presentations with Inkscape
by Christoph Leuzinger 06 Feb '05

06 Feb '05

Hello, I'm currently preparing a talk and thus looking for a presentation software. The following criterias have to be met: * open source software * should either run on my Apple iBook, a NetBSD system, or both I've been toying with Inkscape lately, and I enjoyed drawing some figure for the talk. It's real fun to use all the nice features like rounded boxes, transparency, etc. Inkscape provides. So while I was at it, I just went ahead and created the correspondent presentation slide. It took some time until I actually discovered "inkview" -- you should definitely place a note somewhere, so people will find it! But this is just the thing I was looking for. No fancy transitions and other useless stuff, but clean font rendering and nice figures. Fonts actually render much cleaner than in Apple Works' presentations. It's a lot faster than batik-slideshow, plus it scales the slide down, so you don't have to worry about that when you draw it. So, I just wanted to thank you for this great piece of software, and keep it up! Just as a side note: I installed Inkscape 0.40 and all its dependencies from The NetBSD Packages Collection [1] both on NetBSD and Mac OS X 10.3, and it works like a charm. (Except that I cant get fullscreen output from inkview, but that may be related to Apple's X11 implementation.) [1] <http://www.pkgsrc.org/> Regards, Christoph

1 0

[inkscape@...334...: [Inkscape-devel] 0.41pre1 tarball is up]
by unknown＠example.com 06 Feb '05

06 Feb '05

Hi all, The first pre-release version of the code is available for testing. Go to http://sourceforge.net/projects/inkscape/ to download it. Bryce ----- Forwarded message from Kees Cook <inkscape@...334...> ----- From: Kees Cook <inkscape@...334...> To: inkscape-devel(a)lists.sourceforge.net Subject: [Inkscape-devel] 0.41pre1 tarball is up Date: Sat, 5 Feb 2005 22:07:55 -0800 Ted and are both having harddrive and filesystem problems tonight, it seems. I've managed to get the 0.41pre1 tarball up on sourceforge, emulating the prior prerelease notes, etc. -- Kees Cook @outflux.net ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ Inkscape-devel mailing list Inkscape-devel(a)lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/inkscape-devel ----- End forwarded message -----

1 0

ubuntu .deb package
by Tanari 05 Feb '05

05 Feb '05

I made ubuntu .deb package http://inandrei.pochta.ru/inkscape_0.40-1_i386.deb.tar or http://s11.yousendit.com/d.aspx?id=1ZI9T8FQZRLJ83EJQOQJ7FBOXO

1 0

Inkscape 0.40 installation
by Claus Cyrny 04 Feb '05

04 Feb '05

Hi, I'm currenty still using Inkscape 0.38, which was included in my Linux distribution (Ubuntu), but when I tried to compile v 0.40, I get error messages at the end of ./configure, saying that some libs (like XML) are missing. How can I fix this? Actually, since 0.38 works, all of the required libs should be installed, and I really would like to check out the new features! TIA, Claus -- http://home.arcor.de/ccyrny/profil/en/index.html

4 3